Material delete
Hai All,
I have 10 plants in a single company code, now I want to delete a material for a single plant can any one explain me
bye
sreenivasa chary
Moderator message: Basic question -answer can easily beeing found with searching the forum or help.sap.com - thread locked
Edited by: Jürgen L. on Dec 30, 2011 6:04 PM
Hi,
check following link
[MASS deletion of materials;
Regards
Kailas ugale
Similar Messages
-
Hi Gurus,
I have a issue, The client want to delete material from the material master. In the TCode MM06, I have made the material deletion flag. When I checked in MM02 it says that material is flaged at client level.
But the client requirement is that they want to delete the material permanently. I tried to do it in TCode SARA, but could not get it. When we check it in MM02 the message should be.." The material is no more exist ". Can any one give step by step process to delete the material permanently.
Valued respondents will be rewarded properly.
Babu.PDear Babu,
If you want to delete a material, first you have to mark the material for deletion and then you have to archive the materials.
Please check with,
[Archiving the Material Master|http://www.sap-img.com/bc003.htm]
[SAP Help - Archiving the Material|http://help.sap.com/saphelp_erp2005/helpdata/en/8d/3e59bc462a11d189000000e8323d3a/frameset.htm]
Best Regards,
Amit
Note: Just for knowledge-sake:
T. Code: MMDE - Delete all Material from the Client -
Hi All,
Whats the difference between material deletion and Material Block.
If we flag the material for deletion, will it solve the same purpose as for block.
Appreciate your comments.Hi Kiran,
Material deletion is the deleting of material from the database .
Material block is u cannot make any transcation using that material.
Both r different .
hope it wud have answered ur question.
Reward if useful
Shawn -
Material deletion flag at storage location level is not working
I have a material that is created in some plants and also in some storage locations within each plant. If I mark the deletion flag at plant level I am not able to create a PO -> Me051 error message appears. Whereas if I mark the deletion flag at storage location level nothing appens. I am able to create a PO and also to create to goods receipt. Is there any customization that I should do in order to get the error message?
Thanks in advance.storage location level deletion flag is not checked at order creation.
it is assumed that you can change the storage location when you do the receipt.
MRP run is at plant level, so the requirement is valid even the storage location view is flagged for deletion. -
How to extract material deletions into BI ?
Hi experts,
Suppose if a material is deleted on R/3 side, how to extract the data of that deletion of material into bi system. Is there any field which is updated when a material is deleted ?
Please give the technical name of the field and the specified data source.
Regards,
Naveen .Hi,
you can´t delete materials on the R/3 side. It can be only archivated, if you don´t need it any more. You lost the archivated material if you delete the master data for 0MATERIAL (or another infoobject you use) on BW side and you make a full upload for master data from R/3. There is no update field for archivation.
regards
Edited by: Zoltan Both on Nov 26, 2008 3:04 PM -
hi
i want to delete material which is not being used for long time stored in a storage location.
what is the process and is report to delete material based on storage location and plantHi Chaithu,
Generally we dont delete the material which is not used.
we have a Field LVORM in table MARA. we set the flag value high for the material that is not used. Even though we dont use the material but the material is always stored in SAP for any further verifiaction .
This Flag indicates that the particular material is not used any more.
Field LVORM ---> Flag Material for Deletion at Plant Level
we also have this field LVORM in MARC--->Plant Data for Material
and MARD--->Storage Location Data for Material
so we just set this flag for the materials which we are not using.
Best regards,
raam -
Routing exist error in Material Deletion
HI,
At the time of archiving ,system shows the following error message s.
1. MARC : xxxxxx - routing exists
2. MARC :xxxxxxx- Use in routing -inspection plan
we have checked and found that routing and inspection plan taask list for the problematic material but i dont know why system showing this error message .Kindly let me know how to resolve this issue.
Thanks & regards,
Renuga.Ait has only a deletion indicator - and it still exists , that is what SAP is complaining about. you have to archive the other objects first.
-
Hello to All,
We are using SAP-Retail ECC 6.0.
How can I put delete Flag for Material Master Records ?
Thank YouHi,
As per SAP Note 743373, for Retail articles, it is not possible to set deletion indicator in tables MLGN and MLGT. For standard materials, it is possible to use transaction MM06 to do so.
For articles blocking, you can change validity of date in Listing to date in "Listing View" in Article Master.
If you want to discontinue articles, then follow the steps;
(a) Identify the list of articles for discontinuation (using transaction code WSE1)
(b) After executing the program, system set deletion flag indicator
You can set article discontinue at following levels;
(a) For the Vendor
(b) For the Assortment
(c) For the Distribution Chain
(d) Client-wide
Hope this info will suffice your requirement.
Regards - Muralidhara -
Hi,
I have one scenario which i need your expertise advise, that is material
was created as make-part in GUE1, however due to some reason, we don't
assemble this pump model here in GSI, but we counter-offer the alternative
pump model to customer instead.
My query is...can i just mark this material for deletion in GUE1 & GUE1,
but this material is still valid in other Grundfos sister companies.. and
if i marked for deletion in GSI, will it impact to other companies?
How do i control for these marking deletion? I find it everyone is asking
me to delete/undelete, and it became an daily routine for me... Please
advise me, thanks.
Best regards
Sivahii
Ya u can do MM06 flag for deletion.
If u done that transaction its nothing but u marked for deletion , but u have to do archivation of material whaich are all marked for deletion .
Then it will get deleteed permanently.
Get the help of technical consultant.
thanks -
Dear all,
which table the mark field in?
i want to query all materials that are marked for deletion. which table i can use ?You can delete material at client, plant, Valuation, stock, sales area level also.
following are resp. fields
MARA-LVORM
MARC-LVORM
MBEW-LVORM
MARD-LVORM
MVKE-LVORM
Regards,
Amol -
Hello all,
I have deleted one of the materials uploaded in CJ20N, but the material remains in the History and can be seen when we click on setting and activate Display Deleted Objects.
How Can I delete this material so that it will not remain in the history too.
KPGHi,
In CJ20N see the F1 help in menu settings for "Display deleted objects"
Display deleted objects
Specifies that (logically) deleted objects and objects with the deletion flag status are also displayed in the structure tree of the Project Builder.
It will remain in the history because it is logically deleted not permanently from the database.
Regards,
Sandeep -
Material deletion at plant and storage location deletion at plant
hI EXPERT,
We are going to extend the materials in plant A to plant B and C. So we will extend it using LSMW. After extending, we need to delete the materials in plant A and storage location in plant A. How can we do that? Please explain step by step.
ThanksHi,
If you want to delete material at storage location level
Enter MM17
Select table MARD
Select fields tab
find MARD-LVORM
Execute (F8)
Enter list of materials
Enter plant
enter storage location.
tick the field lvorm(carry out mass change) -
Material deletion with MM70 / MM71
Hi Friends,
I am trying to delete a material by archiving and deletion with standard transactions MM71 / MM70.
while archiving, the system throws an error that "Material Used in BOM". However this material was used in a BOM but later removed from that. System is finding link between material and BOM from different tables.
currently the material is not used in any BOM. can someone suggest me how to proceed in this case.
Thanks a lot
RohitHi Rohit,
You can get step by step for archiving the materials master records (SARA) on the following posts
MM70,MM71,MM72
Cheers
Kris -
Material Deletion (Which is in stock)
Hi,
Can we delete a material with MM06 transaction which is having the stock.If at all, we want some error message to be displayed for such cases, then which message can be opted for???Hi,
Yes.. you can delete the material master. But, why you want to delete it?
Put X-Plant status to obsolete, or any other....
Prase -
Material deletion at the batch management level
hello all,
i would like to know how the material is flagged for deletion at the storage location level. how to indicate the deletion flag and what is the tcode for this.
thanks..Hi Maxx,
Use trx code MM06 ( flag material for deletion )
MM70 Archive .Object name MM_MATNR
Hope it will help u
Regards,
Hareesha
Reward points for usefull answer's
Maybe you are looking for
-
I am new to owning a Mac. When I plugged in my iphone to transfer over my photos I failed to press the import button (didnt clue in I had to do this because I saw all the photos on the screen). In the mean time my husband deleted all the photos from
-
Using Additional parameters in file receiver
Hello all, I'm trying to use additional parameters the following way: In my receiver adapter: File Name Scheme : %var%.txt Additional Parameters: %var% | myvalue Checked "Set Adapter Specific Message Attributes" and "FileName" in both sender
-
SRM Purchase Order not Created Automatically
SRM 7.0 Extended Classic Scenario: Issue: When creating a standard shopping cart in SRM the Purchase Order is not created in SRM (or in R3). Eventhough the shopping cart is fully approved and has a vendor assigned. The overall shopping cart status
-
Edit in iMovie using archived iDVD project?
Well it looks like I may done something rather stupid. Before the holidays I produced a family vacation video, burned the DVDs and sent them out to all my family members. After watching it they pointed out some typos in some captions and some editing
-
SQL Server 2012 Analysis Services Deployment Wizard broken after SP1
I have installed SQL Server 2012 SP1, now I cannot edit Data Source Connection Strings anymore in the Deployment Wizard. When clicking the button labeled "..." I get an error "Could not load file or assembly 'Microsoft.Data.ConnectionUI, Version=8.0.