Material deletion flag at storage location level is not working

I have a material that is created in some plants and also in some storage locations within each plant. If I mark the deletion flag at plant level I am not able to create a PO -> Me051 error message appears. Whereas if I mark the deletion flag at storage location level nothing appens. I am able to create a PO and also to create to goods receipt. Is there any customization that I should do in order to get the error message?
Thanks in advance.

storage location level deletion flag is not checked at order creation.
it is assumed that you can change the storage location when you do the receipt.
MRP run is at plant level, so the requirement is valid even the storage location view is flagged for deletion.

Similar Messages

  • Remove Deletion flag on storage location

    Dear all,
    Kindly find below image
    i want to remove the  deletion flag on storage location and plant.
    Kindly let me know how to process it
    Regards
    Rajasekaran

    Hi Raja,
    Just un-tick at plant level and press enter. Storage Location tick will be cleared automatically. Then SAVE. And later if you want to maintain only for storage location, then enter material/plant/storage location in intial screen of MM06 and tick only storage location
    Thanks & Regards,
    Ramagiri

  • Storage Location Prompt (F4) Not Working

    Hello,
    I have added several storage locations in the extended attributes in PPOMA_BBP. However, when in the shopping cart, I cannot prompt for a list of values.  The list of values display pop-up does not show nor does a 'No values found' pop-up show. 
    What did I miss?  Oh, and yes I did a BBP_LOCATIONS_GETALL earlier.
    Thank you in advance for any assistance.
    Dean.

    Hi,
    Check the following points:
    -The storage location's plant is also affected to the user as an extended attribute
    -The plant's company correponds to the user's company code (function tab at the company org level correctly filled)
    -The logical system of the storage location corresponds to the log syst. where the following document (PO or PR) is to be created
    Hope it helps.
    Vadim

  • Material deletion at the batch management level

    hello all,
    i would like to know how the material is flagged for deletion at the storage location level. how to indicate the deletion flag and what is the tcode for this.
    thanks..

    Hi Maxx,
    Use trx code MM06 ( flag material for deletion )
                       MM70  Archive .Object name MM_MATNR
    Hope it will help u
    Regards,
    Hareesha
    Reward points for usefull answer's

  • Opening and closing balance values at storage location level

    Dear all,
    I want to know opening and closing balance values and receipts and issue values at storage location level for certain period.
    I tried with MB5B, it is not giving value at storage location level, it is giving quantities at storage location level and values at plant level. But requirement is: please see below example:
    All values are in USD          
    Storage location:      1001     1002
    Opening Balance:      2000     3000
    Receipts:                           1000      2000
    Issues:                            2000     3000
    Closing Balance:      1000     2000
    Please help in this regard (I want value of the stock only, not qty)
    Regads,
    Veerappa
    Edited by: Chinna Veerappa on Jul 27, 2010 5:27 PM
    Edited by: Chinna Veerappa on Jul 27, 2010 5:28 PM

    vlauation is at plant level (MBEW table) the storage location level does not carry values (table MARD).
    You may have to develope your own ZMB5B  program and calculate yourself what is not stored in SAP.

  • Re: ATP check at storage location level.

    Hi All,
    NEED urgent help.
    I want to know if it is posiible to have ATP check at storage location level only.
    I do not want this check to happen at plant level.
    Please reply.
    Thanks and regards,
    Nilesh

    Hi Shankar,
    Storage location is defaulted in sales order.
    Can you tell me if there is any user exit for ATP wherein I can carry out the ATP at storage location level and not at plant level.
    Thanks and regards,
    Nilesh

  • Shipping point at storage location level in ME2O

    hi Guys,
    I am using stock transport orders at storage location level, and it works fine, we have a customizing point to configure shipping point at storage location level.
    My doubt is if we can use also shipping point det. at storage location level for creating Deliveries for Subcontracting process in ME2O.
    It works only If I customize the shipping point det. at plant level, not considering the customizing at storage location level.
    kind regards
    Brian

    Dear Ram,
    Can you please specify the configuration that you have made? And which storage location determination rule are you using for your Delivery Type?
    Regards,
    Amitabha

  • Material stagging at storage location level

    Hi Guys,
    When i do material stagging at storage location level (MF60) material moved from one storage location to another storage location 311 and material document is created in system .
    I want to do it through two steps that is material issue from one location and receipt in other location
    how to do it , what configuration need to be done .
    I do not have in WM in scope of implementation.
    Thanks and regards
    Thamizhchelvan G

    Dear,
    The movement type 313 removes the stock from the first storage location and in conjunction with this movement type yuo use Movemnt type 315 which in turn places the material in the receiving storage location.
    In OMBA you will see Goods Issue Doc Type..
    If you click that in the next screen , you will find Tcodes & Doc Type...
    Now Go to that T code & Press F4 in the Movement types filed...
    So the Above Doc type is applicable to those Mvt types..
    These transactions are attached to the Movment types in OMJJ transaction, select the movment type click on Allowed transactions page.
    So based on the transaction attched to the Movement type the document type is determined for the Movement types.
    Hope clear to you.
    Regards,
    R.Brahmankar

  • Material block for sale in plant-storage location level

    Dear experts,
    Please help me how to block a material to sale in plant-storage location level.
    Thank you.
    Regards,
    Badruddoza

    The standard sales block (MVKE-VMSTA) in material master is valid for sales organisation / distribution channel combination (VKORG, VTWEG) - this means you cannot do it for Plant / SLoc combination,
    What does it mean to block it at plant / sloc level? Generally in SO you do not specify the storage location. Or you are speaking about MRP also? In this case you could use SLoc-MRP (with proper availability check in delivery) for your material but the problem is that a plant might be assigned to several sales area and this SLoc would be hidden for them also.
    Could you please specify what would you like to achieve, what sales block means according to you?
    Regards,
    Csaba

  • Deletion or block storage location at material lable

    Hi friends.
    Can it possible delete or block storage location , once i have assign storage location to particulars material.
    Anil Chaudhary

    Hi,
    If u want to delete the storage loc for a single material then do the same thro' mm06, enter the material # and storage loc, put a del ind tick & save it.
    If u want to delete the storage location itself from plant then u can do the same as told above, thro OX09 by making the stock nil
    regds,
    CB

  • Physical Inventory at Storage location level

    hi.,
    Environment  ECC 6.0
    Our suggestion on Physical inventory at the client site was as per SAP
    "If the flag for posting block is set then no movements can be posted for that material. Note that the inventory document should be created at a material / plant / storage location level so as to not block that material at other storage locations. If a block is not required then do not flag the “Set posting block” indicator. It is always prudent to restrict the amount of materials being counted and to clear the count results quickly so business is not interrupted"
    CLIENT feedback: " Like wise we asked the client to make the selection by Plant = 1000, SLoc = 100, and WBS =2312-344-332 and checked Posting Blocked.
    My understanding was that this selection would block only the 1000/100/WBS location.
    Client is having a problem is that people trying to transact in a SLoc other than 100 (200, 300, 400)  are experiencing the “Blocked” warning.
    I know I heard that we can inventory a Storage location in SAP and lock it and the rest of the sites could continue without interruption.
    Any suggestions on how we can achieve this.
    Tx

    Hi,
    Are you setting teh posting block at the time of creation of physical inventory document or by running MI32 later?
    If you are running MI32, then ensure that you enter teh storage locations correctly, else the material irrespective of storage locatioons may get blocked.
    Hope this helps

  • Stock valuation down to Storage location level

    Dear all,
    System setup for stock valuation is till Plant level. And understand that's how data stored in table MBEW and MBEWH until plant level only.
    Eventhough that is system standrd, is that possible to get the stock valuation until Storage location level?
    For eg: In MB5B, there is opening stock, closing stock and the material movement posting. I need to get opening and closing stock for each storage location.
    Could you please comment if there are tables store these data? Kindly comment.

    Hi Afshad Irani,
    Thanks for your reply. Understand from the previous post that stock valuation for storage location can be done via table MARDH or report MC.9, but this tools are excess base on period/month basis.
    My case, i need to report storage location stock for both (1)last month 06.2010 and (2)yesterday's stock 06.07.2010. So i can use MARDH table to report (1)last month stock for each storage location. While for (2) yesterday stock, table MARDH isn't help.
    Could you please advice further?

  • MCHB,MARD - Stock available at plant level and storage location level

    Hi ,
    How to determine how much stock available at Storage location level and Plant level. (Lot is not maintained).
    In MCHB-Stock at lot level is shown.
    In MARD-Stock at Storage Location level is shown lncluding
    the stock maintaned at the lot level.
    If i want to know the stock which is not maintained in Lot, i.e, Stocks directly maintained at Storage location / Plant.
    Do I need to subtract the MCHB Value from MARD Value ?
    Is there any other way available to find the stocks which is not maintained at lot level.
    Regards
    Prasath

    Hi prashant,
    What do u mean by stock maintained at SL level without batch level.  Do u mean that some materials are subjected to batch management and some or not?
    If that is the case, for all batch managed materials, u can see the stock at batch level and also same is summed up at SL level.  But still what ever u are getting from MARD table isstock at SL level only.
    If u have activated batch management for any material, it will always be shown at lot level also.
    hope this clarfifies query
    award points if found useful

  • Different Batch Classification at storage location level

    Dear guru ,
    I have tested that i can insert different values of batch classification for the same material and the
    same batch number but in different plants.
    In MSC1N/MSC2N transaction the system allow a insertion at storage location level.
    Itu2019s possible to insert different values of batch classification for the same material , same batch number and the same plant but in different storage locations ?
    Thanks.

    hi,
       check in OMCT under which batch level the current system is, if the level is set to be material level or client level, if you make a change to the batch classificaiton, it will reflect in all the plants across the clients.
    Batch classification is not maintained at the storage location level.

  • Profit centre at storage location level

    Hi Experts,
    Can we define a profit centre @ storage location level?
    My scenario :
    The document splitting of FI is activated for the document type of FI and also the profit centre is mandatory entry for any accounting document that will be created so when I am trying to post a MIGO I encounter the error
    "Balancing field "Profit Center" in line item 001 not filled"
    We have a option of maintaining a profit centre in plant data/storage location but i will be updated in the profit centre field of Costing1 view . But we does not want to upadate in costing view of material master data.
    Basically We want the system to determine profit centre based on storage location  in Goods reciept transaction .
    Helpful Sugestions on this would be helpful & rewarded max .
    points.
    Regards,
    Patil
    t

    Hi Raju ,
    Thanx for the reply.I am Basavarajs Collougues.
    Our Enterprise Structure of our Client is as follows
    One company code is assigned to one plant and we have treated all the branches across India as Storage locations.Each  Branch (Storage Location- MM) is configured as Profit centres in FICO.The goods are procured for a storage location.
    By using the functionality of document splitting, the profit center field is made mandatory for all the accounting documents generated in the system. Now we are trying to post a goods receipt against a Purchase Order, the system is giving error "Balancing field "Profit Center" in line item 001 not filled"
    The option is there to maintain a profit center at the plant level.But we have several storage locations under the plant and each storage location has to be linked with the particular profit center. So that, while doing goods receipt the system should determine profit centre based on the storage location in purchase orders.
    Please suggest on this.
    Regards,
    SVU123

Maybe you are looking for

  • How to genarate performance monitoring report in SAP PI automatically

    Dear All, I have a requirement where I need to automatically generate a report of monthly data of Performance monitoring in SAP PI  and send it to business users. As per my understanding, this can be achieved by pulling the data every month from the

  • ITunes can't locate any of my songs

    OK so I plugged my iPod into my computer to sync it because I've added some new music lately. But I'd forgotten to plug in my external HD (where I have almost all of my 4500 songs) so obviously it said all the tracks couldn't be found and stuff. So I

  • Capping changes in vm.cfg are not persistent

    A customer tried to cap a VM But when they do other changes in the GUI the vm.cfg file is overwritten so the capping info is gone Is this a bug or a feature?

  • IPad 3 or 4 ??

    Hello, I have an Ipad that is still sealed in its box.  How do I know if it is 3rd or 4th generation? it only says MD513 B/A on the back of the box. thank you

  • Sh conn (Cause of failures)

    Hello Instruction: CONN WEB server farm online sh Failure occurs on a particular server. The cause of the failure? sh serverfarm WEB serverfarm     : WEB, type: HOST total rservers : 3                                                 ----------connect