Material deletion from CJ20N
Hello all,
I have deleted one of the materials uploaded in CJ20N, but the material remains in the History and can be seen when we click on setting and activate Display Deleted Objects.
How Can I delete this material so that it will not remain in the history too.
KPG
Hi,
In CJ20N see the F1 help in menu settings for "Display deleted objects"
Display deleted objects
Specifies that (logically) deleted objects and objects with the deletion flag status are also displayed in the structure tree of the Project Builder.
It will remain in the history because it is logically deleted not permanently from the database.
Regards,
Sandeep
Similar Messages
-
Material Deletion from Routing Groups-Mass T-code
Dear Experts
we have a big task we have to delete Routing assignments from Routing Groups we have around 4000 material codes.
Is there any mass code to delete Material assignements from Routing group.
Regards
sandeep patilHi,
CWBQM from Mass change
QSR6.
Use transaction CA99 - delete task list with archiving, here enter PP_PLAN as the object name
Also transaction CA98 can be used to delete w/o archiving
BAPI_ROUTING_PROCESS
Regards,
R.Brahmankar -
Material can be deleted in CJ20N even if PR, PO exists
Hi Gurus
In CJ20N even if the codified material contains PR,PO system allows to delete the material from CJ20N.Kindly suggest me some solution to this problem
Regards
Thanks in advance
Abhijit SenHi,
Refer a similar thread. It may help you:
Is there any way to block PR changes when PO exists in project builder
Regards -
DELETE MATERIAL PERMANENTLY FROM MATERIAL MASTER
Dear All,
I want to DELETE MATERIAL PERMANENTLY FROM MATERIAL MASTER it has stock but no open statement like po ,gr etc when i flag the material in t-code mm06 and filling all the recquirement field then enter then tick all recquirement field then save a warning message delection flag also change at lower level then enter it shows delection flag changed but this material is issued to cost center . pls explain me points must be rewarded.
Aminhi ameen!
u change the warning message into an error message in IMG>MATERIAL MANAGEMENT>INVEN>DEFINE ATTRIBUTES FOR SYSTEM MESSAGES. message no M7127. -
While deleting project from CJ20N entries are not deleted from table PRPS
Hi,
I am deleting project from CJ20N then from PROJ table entries are getting deleted but WBS element entries are not deleted from table PRPS.
Any deletion Flag should also be checked?
Thanks in advance!
Regards,
JyotiHello,
Thanks for reply !
My problem is I am deleting project and WBS Elements from CJ20N but WBS element entries are not deleted from PRPS table.
Why they are appearing in PRPS table and how it can be deleted?
Thanks ! -
Request Got Deleted From 0PP_C01(Planned/Actual Comparison Order/Material)
Hi experts,
I am a newbie in the BW area.
We have 0PP_C01(Planned/Actual Comparison Order/Material View) , 0PP_C03(Plan/Actual Comparison Operation/Work Center View) and 0PP_C05(Plan/Actual Comparison Material Consumption) activated in our production system.
Few days before one data error happened during data load and accidentially, that particular request got deleted from the system.
When we tried to load data again, it is not allowing since the request is missing and the update mode is delta update.
Can any one guide me to retrieve the data back to the system??
Thanks alot in advance
ShobinHi,
You can try using PSA if that request it's still there.
Otherwise, you will need to regenerate that request in source system (by filling setup tables with parameters) and update BW with a full load.
Hope this helps.
Regards,
Diego -
Is there a transaction to delete an article (Material Number) from SAP?
Hello SAPients!
Does anybody know: Is there a transaction (or FM) to delete an article (material number from SAP ?
Thanks!You can only flag the material for deletion. You do this via MM02, or you can do it via BAPI_MATERIAL_SAVEDATA. THe material can only be fully deleted when the archive process has been ran for the object.
Regards,
Rich Heilman -
Delete material bom from ECO.
Hi,
I need to delete material bom from eco .
thanks,
Aviva.Hi
please check
CSAP_MAT_BOM_DELETE
FM to Delete material from BOM
Regards
Sujit -
Handling Units Deletion from Shipment
Hi,
I got a problem in deletion of handling units using the FMs V51P_FILL_GT and then HU_PACKING_AND_UNPACKING. The FM HU_PACKING_AND_UNPACKING has got a structure gt_xvekp which gets populated dynamically when a HU is deleted from a shipment, but this is not happening when i call the FM separately in a program. Can any one help me or provide me a sample code in resolving this. Correct answers would be rewarded.
Thanks
AbhishekHi,
LT06 is to create TO with reference to material document.
I'm not sure what you want exactly. You marked creation of TR in customizing - in this case you have to create TO from LB10 from the automatically generated TR or you can create TO automatically with suitable reports (you have to run programs in background).
http://help.sap.com/erp2005_ehp_04/helpdata/EN/97/91cfd2571211d4b3210050045571f7/frameset.htm
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f8406c4afa11d182b90000e829fbfe/frameset.htm
If you want to have immediate TO (you want to create the TO at immediately after GR si posted), you have to set it in customizing in WM-IM interface. Please read OSS note 566090 for details.
Please also search on the net / forum.
Regards,
Csaba -
WBS elements not deleted from PRPS table
Hi Experts,
In CJ20N transaction:
When I delete a project with project profile (ZABC):
- The project record is completely deleted from 'PROJ' table.
- The WBS records are completely deleted from 'PRPS' table.
When I delete another project with different project profile (ZXYZ):
- The project record is completely deleted from 'PROJ' table.
- The WBS records are NOT deleted from 'PRPS' table.
What is the reason for not deleting records from PRPS table?
Thanks in advance for your valuable answers.WBS should be having actuals.
-
Is there a way to retrieve a text message that has been deleted from my iphone?
Is there a way to retrieve a text message that has been deleted from my iphone? I did't delete the message but after i synced my phone the message was gone.
No, the app doesn't use Safari. The app is AutoDesk Inventor Publisher Viewer. I think there is a way that you can have a publish Inventor file, and if you create a correctly formatted hyperlink, you can click on it and it will immediately open the file in the viewer.
I know that if you offer the file as a standard download, iOS will ask whether you want to open it with Inventor Pub. Viewer or save it to another app that can accept files. I would prefer to skip the prompt, and just open the viewer.
I've heard mention that this can be done with this application, but I can't find reference material anywhere. -
Hi Gurus,
I have a issue, The client want to delete material from the material master. In the TCode MM06, I have made the material deletion flag. When I checked in MM02 it says that material is flaged at client level.
But the client requirement is that they want to delete the material permanently. I tried to do it in TCode SARA, but could not get it. When we check it in MM02 the message should be.." The material is no more exist ". Can any one give step by step process to delete the material permanently.
Valued respondents will be rewarded properly.
Babu.PDear Babu,
If you want to delete a material, first you have to mark the material for deletion and then you have to archive the materials.
Please check with,
[Archiving the Material Master|http://www.sap-img.com/bc003.htm]
[SAP Help - Archiving the Material|http://help.sap.com/saphelp_erp2005/helpdata/en/8d/3e59bc462a11d189000000e8323d3a/frameset.htm]
Best Regards,
Amit
Note: Just for knowledge-sake:
T. Code: MMDE - Delete all Material from the Client -
Hi All,
Whats the difference between material deletion and Material Block.
If we flag the material for deletion, will it solve the same purpose as for block.
Appreciate your comments.Hi Kiran,
Material deletion is the deleting of material from the database .
Material block is u cannot make any transcation using that material.
Both r different .
hope it wud have answered ur question.
Reward if useful
Shawn -
Can ODI journalising help to identify if any member deletes from hierarchy
Hi
I am applying journalizing to identify if there is any change in hierarchy.
I extract dimension hierarchy into a DB table on which journalizing is already applied.
If there is insert in the DB table (new member added), the ODI identifies it, any updates my target from this journalizing table.
Now, if i delete a member from my dimension and then extract this dimension members into DB table, it just enters data into table(overwriting the existing rows).It does not identify if any member has been deleted coz that member still exist in the DB table & does not get deleted from the table.
In this case how can we check if any member has been deleted from the hierarchy or not. Is there any other option to achieve thisI just looked at all the ddls' i have the following syntax for all MV's
CREATE MATERIALIZED VIEW WIS.SNAP_MAX_ENTITY
TABLESPACE WIS_CDS_DATA01
PCTUSED 0
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 80K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOCACHE
LOGGING
NOCOMPRESS
NOPARALLEL
BUILD IMMEDIATE
USING INDEX
TABLESPACE WIS_DATA01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 80K
NEXT 80K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
FREELISTS 1
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
REFRESH FORCE ON DEMAND
WITH PRIMARY KEYEdited by: vijayp on Aug 7, 2012 6:44 PM
Edited by: vijayp on Aug 7, 2012 7:02 PM -
Deleting from iphoto but not from facebook
Hello . . .
When I first bought my mac I was happy to just use iphoto for the few pics i take . . . i have now started to become a photographer, and i am needing to store my photos externally due to the limited space on my macbook pro . . .
Is there a way for me to delete the photos on iphoto but keep them on facebook?
OR . . alternatively . . .
if I store my photos on the external HDD and make that the default library location, (but still deleting the library on the MBP), would the facebook photos be affected?
Im not sure what my options are now that I am wanting to free up space to work with on my mac.iPhoto syncs with Facebook - the idea being if you make a change in one place then it will also be made in the other. So, if you sync with Facebook and delete from your Mac it will eventually be deleted from Facebook as well. In effect, you're using iPhoto to manage the collection you have online.
If you don't want that don't use the Share to Facebook command. Instead use any of the (many) other ways to upload to Facebook. That way, deleting from your Mac will not affect your material online.
BTW, the same is true of the relationship between iPhoto and Flickr, and the same solution if that's not what you want.
Moving your Library to an external disk will not affect Facebook and your online syncs in any way.
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
If you're becoming a photgrapher then you'll quickly realise that Fcebook is nowhere to store your photos. They are "processed" when uploaded and that's a code word for "heavily compressed and reduced in quality". For instance, I just ran a test. I uploaded a 2.7mb Jpeg to Facebook, and then downloaded it again. The file size of the downloaded image? 873kb - or about 66% smaller. That's 66% of the data in the file thrown away.
There are much better locations online for storing, sharing and backing up your photos - Flickr, SmugMug, Zenfolio, literally, hundeds - and they are dedicated photo sites, geared to the needs of the Photographer.
If you are serious about being a photographer you might also like to compare the permission you give Facebook to use and sell your photos compared to these other sites.
Regards
TD
Maybe you are looking for
-
Problems with Customer Service AND unexplained charges!
I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel fi
-
How to resolve multiple declaration error in libraries
Hi All, I have one C Application, it links to two libraries. There is one variable with same name defined in two different libraries. These two libraries are third party libraries and i don't have access to their source code. Compiler gives multiple
-
How to apply a template to a page uploaded using sftp?
I would like to upload the .html document with the appropriate template using sftp instead of applying the template using BC's back end.
-
Help regarding algorithm..
One of my tables is having following data : Category Scheme SchemeType Amt A ABC Z1 10 A ABC Z2 20 A DEF X1 18 A DEF X2 15 B XY A1
-
Rebt no bond:under rebate
hi all iam not able to create rebt no bond:under rebate in the transaction J1IBN01(create bond ) its showing the error BOND CAN NOT BE CREATED FOR EXPORTS UNDER REBATE ANY SOLUTIONS ? REGARDS SRIDHAR