Material Deletion Indicator - Urgent

Hi All,
By mistake i have deleted a component in a work order & saved it. I would like to like to is it possible to undo this deletion?
I know i can add back this component to the work order, but i want to undo the deletion.
Await inputs.
Vivek

Hi,
It is not possible to perform UNDO for deletion after you save.
Regards,
Krishna Mohan

Similar Messages

  • Service material deletion indicator

    Hi Freinds,
    there is a SES to delete. when i select the perticular SES and select delete, the system says that the service material is no longer use. but it has not been deleted. pls help me to solve this issue.
    Sujith

    Hi Sujith ,
    Goto AC03 , enter ur activity number.
    Then Click on Purchasing Data and check the status.
    Remove block indicator if any and try once again.
    Regards
    Ramesh Ch

  • PO Deletion indicator cannot be unset

    Hi,
    We want to change a material based Unit of measure from PC to EA, but the material has an open PO.
    1. We delete the PO item first with tcode ME22N then change the Material master (tcode MM02), change the based uom from PC to EA. done.
    2. Then go back to UNDELETE the PO item (ME22N), the following error message is displayed "Deletion indicator cannot be unset".
    How to resolve this error, we need to undelete the PO item after the material's has been changed.?? Urgent.

    Hi Eric,
    Sorry...mmr means material master record...
    1. Reset the BUoM from the new one to the old one
    1a) undelete the POs
    1b) use the mmr with original BUoM (that was reset in 1a) )
    or (reset the BUoM and undelete the POs and) create a new material master with desired BUoM and use this (instead of the original material master with new BUoM if the deleted POs are not OK for you).
    2. Keep the mmr with new BUoM with the delted PO items. As I know you can delete a PO item if GR/IR balance is OK for it so I think it shouldn't be problem.
    2a) If you want to get rid of partially delivered PO items >
    2a1) reste the BUoM from new one to the original
    2a2) undelete the partially delivered POs
    2a3) reduce the qty of these PO items to achieve that the should completely delivered and after that delete them
    2a4) set the new BUoM for your mmr
    2a5) create new PO items instead of the before reduced PO items with proper qty (with the mmr that has the new BUoM).
    BR
    Csaba

  • Deletion Indicator cannot be unset" error message in PO

    Hi Experts!
    I have a PO in which I deleted a line item, which has been invoice verified, delivered, etc.  Now when I choose to unblock/undelete the line item, it give me error message:  "Deletion Indicator cannot be unset".  Is this a major problem or can it be fixed.  Any information would be greatly appreciated.  Urgent!  Thank you for your time!
    Best Regards,
    WC

    Hi,
    I would say that system should prevent you to delete a line item po with a GR and or invoice entered. For me it should be a bug.
    Now you have done the line item deletion, inconsistency may occur...
    Did you try first to uncheck the final invoice indicator in the PO ?
    Did you check OSS note 1023130 ?
    Kind regards,
    Yann

  • Scheduling agreement condition type default deletion indicator in backend system

    Dear team,
    our business process is that-
    In SRM system scheduling agreement is created. once its approved from SRM in Backend ECC R3 system the same is getting replicated.
    But in few of the cases its been obserbved that the condition pricing is flowing but with deletion indicator selected by default.
    I have checked the IDOC for the same but there is no value found flowing from SRM to ECC.
    Even searched for the same Material & same vendor in some cases only observed with deletion indicator.
    For entire scheduling agreement the deletion conditions are updating that is for all line item in scheduling agreement.
    There is no info record exists.
    Appreciate if anyone can throw some light over this.

    Appa K wrote:
    Even searched for the same Material & same vendor in some cases only observed with deletion indicator.
    What is the special cases ?
    I hope you are using time dependent condition for you SA document type.
    Check is it fetching from last PO or SA ?
    What is happening, when you are trying to create SA manually via ME31L for the same material and vendor?

  • Routing exist error in Material Deletion

    HI,
    At the time of archiving ,system shows the  following error message s.
             1. MARC : xxxxxx - routing exists
             2. MARC :xxxxxxx- Use in routing -inspection plan
    we have checked and found that  routing and inspection plan taask list for the problematic material but i dont know why system showing this error message .Kindly let me know how to resolve this issue.
    Thanks & regards,
    Renuga.A

    it  has only a deletion indicator - and it still exists , that is what SAP is complaining about. you have to archive the other objects first.

  • Retail Material Delete Flag

    Hello to All,
    We are using SAP-Retail ECC 6.0.
    How can I put delete Flag for Material Master Records ?
    Thank You

    Hi,
    As per SAP Note 743373, for Retail articles, it is not possible to set deletion indicator in tables MLGN and MLGT.  For standard materials, it is possible to use transaction MM06 to do so.
    For articles blocking, you can change validity of date in Listing to date in "Listing View" in Article Master.
    If you want to discontinue articles, then follow the steps;
    (a) Identify the list of articles for discontinuation (using transaction code WSE1)
    (b) After executing the program, system set deletion flag indicator
    You can set article discontinue at following levels;
    (a) For the Vendor
    (b) For the Assortment
    (c) For the Distribution Chain
    (d) Client-wide
    Hope this info will suffice your requirement.
    Regards - Muralidhara

  • PO and PIR price, Infoupdate, deletion indicator......

    Hello friends of MM,
    I have a strange situation.. There is an inforecord in the system, correct validity, correct PB00 condition, the price is taken in the PO. (even there is a PO created with different price, updated the price history of the PIR). So far so good.
    If I split the validity and set for the current validity a deletion indicator for PB00 condition (the only existing condition), the price is still adopted, without any messages, into PO price!!!
    If I mark for deletion PB00 for all the rest periods, the PIR price is still adopted in the PO!!!!
    Only after mark for deletion the PIR on Purch.org. level, things come to their place.
    All my efforts are just to try to set the system not to adopt the price from the last PO, if there is no current valid PIR price.....

    Thanks,  Sap: IN!
    It turns out that it is just a misunderstanding! While I was testing, a colleague of mine has created a PO with the same material and so the last PO price was not the one I was expecting - the system is taking the last PO price correctly, although referring in the condition table to the current conditions form the PO (which were marked for deletion).... A coincidence, which took several hours of my life
    Going to my task - to forbid price adoption from last PO - I set message 06219 "Net price for item & adopted from last document" to be error, but:
    1) It turns out it is displayed only in case I put manually a price in the PO, different form the last PO price and the system overwrites it; it is not displayed when system adopts the price, without any manual entry before that
    2) Even I set the message category to Error, I still get it Warning, although in F4 help it is written that this is settable and not hardcoded....
    Any ideas?

  • Tcode KKF6N Setting Deletion Indicator

    Hi ,
    When we try to set the deletion indicator for a material in Tcode KKF6N we get an error : "The balance on object ORDER NO.... is not zero.That is there is still costs on the object."
    I have tried variance calculation but returns saying no variances.
    Any suggestions ?
    Thanks
    Kartik

    Also check your settlement profile. 
    In our discrete orders, the settlement profile is set to "must be setttled" meaning the balance MUST be zero.  On some order that are simply "wrong" or very old and we don't want the numbers from previos FY to settle in current year, we change the indicator to "CAN BE settled" set the DLFL and thne change the indicator back.   
    Some issue are just too old or too wrong to fight through the correction - a journal entry is written to correct the GL and the order is set to DLFL
    Hope this is helpful.
    Althea

  • Is there any way to put deletion indicator on sales order

    Hi All
    We are using MTO assembly order concept in our environment. Every sales order item will automatically create a production order. And there were thousands of productions orders which does not have any deletion indicator on them. So when I am running product costing jobs on these production orders, the jobs are running for ever. If I can put a deletion indicator on the production order then my jobs will run faster. To my knowledge, I cannot put the deletion indicator on the assembly order directly and it has to come from Sales order. I do not want to physically delete sales order-But I want to put some kind of deletion indicator on the sales order which will put a deletion indicator on the production order.Is ther any way of doing that?
    Thnaks in adavnce for looking into this

    Hi Michael
    Does the rejection of a line item have any impact on any other scenarios after delivery doc and billing doc wass created?. My manager seems to be doubdtful abt this approach .... does all the companies follow this scenario?.
    Note 308513 says-Deletion indicator should be kept for all the old production orders, but it does not say anything abt the assembly order.

  • Unmarking of Purchase Order deletion indicator

    Hi
    Purchase order deletion indicator was flaged for the line itme due to which not able to do the goods receipt
    Reset the deletion flag , still i am not able to do the GR
    It is giving the error message - PO has the deletion indication
    Could you please help on this
    Thanks
    Tanvi

    Hi
    In EKPO table deletion indicator is not there
    In EKKO table deletion indicator field has the value C
    How to unflag the deletion indicator at header level
    Error message is
    Purchase order 4511582854 has deletion indicator
    Message no. M7031
    Could you please suggest how to move further
    Thanks
    Tanvi

  • PR to PO with deletion indicator problem

    Hello,
    I need to one e.g. in conversion process. I have 3 line items and created PR with that.
    Now after creation of PR marked deletion indicator on second line item and save the PR. Now after release when i convert
    this from PR to PO i am not getting proper results. I want to know whether system will be able to create PO for line item 1 and line item 3 and ignore line item 2? . Also i want that both 1 and 3 line items should be one PO, no searate PO should be issued.
    How can we achieve this.
    Thanks
    Himanshu

    Hi Himanshu ,
    By adopting the PR to the PO via the shopping cart button all marked documets of the overview are copied onto the overview.
    As a workaround you could control the selection of PR, you could select the 'open only' checkbox in the selection screen in
    the overview. Then the deleted items should not appear on the overview and therefore will not be adopted to the purchase order.  Another option is to use the 'deletion indicator' in the variant for purchase requistion therfore excluding the
    deleted items in your selection.
    Kind regards,
    Lorraine

  • Set deletion indicator in purchase requisition account assignment

    Hi Guys,
    Can you please help we with the solution to set deletion indicator in purchase requisition account assignment or close purchase requisition. A purchase requisition of $3.600.000,00 was created through Project system Network-External Processing and it has 2 duplicate network activities and $2.246.577,20 was converted to purchase order then $1,353,423 became the network remaining order plan. A purchase order service entry sheet was accepted and the invoice was created. Now Iu2019m experiencing problem when Iu2019m trying to change WBS element and Network system status to TECO in order to remove the remaining order plan of $1,353,423. Iu2019m getting error message number:06411 the procedure I have follow to correct the error is to reduce quantities in the account assignment item and delete superfluous account assignment by setting deletion in each case but I cannot do that because the fields are grey
    Regards
    Sandile

    Hi,
    please check first if the report ZMO_CORRECT_EBKN  from note 739004  can correct the problem.
    I would like to recommend you to check also the note 796973 whether the correction is avalilable in your coding, it should solve the issue.
    In case the problem still persists, please open a ticket to get help from the primary support in area MM-SRV.
    Regards,
    Edit

  • How to set deletion indicator to SERVICE ENTRY SHEET

    Dear Experts,
    Please explain, is it mandatory to set Deletion indicator to Service entry sheet before Start of Archiving Service  entry sheet.
    Also explain Procedural steps to set deletion indicator to service entry sheet.
    Thanks in Advance

    Dear,
    First of all Revoke Acceptacne as
    Entry Sheet --> Set Status --> Revoke Acceptance .
    After that you can delete....but no Invoice must be exist.

  • Production Order - Modify field Material Provision Indicator for component in the production order

    Good afternoon,
    I have a component in the bill of material, that has the option Material Provision Indicator activated.
    When i create the production order, the component automaticaly is activated with the  Material Provision Indicator option.
    However, in the production order, this field isn't possible to modify, because is closed.
    Anybody knows way the modify this field? Configure to open?
    Thanks.
    Kind Regards,
    António Pinho

    Hello Amar,
    I am also getting the same error while Releasing Production Order and Costing (CO11N). This error is related to EHP7 in our case.
    Please try one of the following solution and see whether the error is gone or not.
    1. Implement the SAP Note 1317551 - Error AD_SUBCON 141 / 143 / 144 (T417)
    OR
    2. Complete the customizing of Material Provision Indicator (T Code OICO) as per the attachment.
    Regards,
    Prashant Karanjgaonkar

Maybe you are looking for