Material Description while goods movement in CORK

Hi experts,
When i am trying process order confirmation, it pick-up material code only and not material description, and it is very difficult to recognize which material is this by this, so need material description field there, but in standard SAP its not there, please suggest me how can i get description there.
Karad D D

Hi,
In CORK screen,material description is there.it will get displayed next to the material.
If you are lokking in CORK goods movement tab,then it is there in end of teh table ,just drag that next to material field and save the layout.from next time onwards it will get displayed next to that material.
To make description next to material always,first drag that field next to material and then click on the table setting at the right hand corner and create a variant and make that variant as current setting.
Hope it helps
Edited by: Girish Adaviswamy on May 12, 2010 12:16 PM

Similar Messages

CO11N-While Goods Movement System Not Allows Column/Field COST CENTER

Dear Friends,
While doing confirmation of PP/PM Order and doing goods movement the system not allows the Column/Field of COST CENTER.
Thanks and Regards,
Satyajit
PP/PM

Dear Thyagarajan,
1.I think the Planner Gruop will be at order level.
2.If I assigned the different Valuation Categories then I need to assign no.of G/L accounts.
Plz look for my senerio->I have a single Mnt.Order in which different operations carried out from different departments like civil,electrical,mechanical.Its like one project in PS.Now I assiged different Workkcenter/Cost Centers to respective operations.Now after confirmation,when I look the Cosing Report system shows the activity Cost departmentwise as its linked to workcenter/cost center,but material cost how it will get posted different departments?
Manually by 261->Order+Costcenter...I can post it but there is problem in Auto Goods Movement
Plz correct if wrong.
Thanks and Regards,
Satyajit

Material determination during goods movement

Hi Guys,
I am using the BAPI 'BAPI_GOODSMVT_CREATE' to create goods movement. And I want to check the material availability and execute the material determination based on atp check results also. Does this BAPI implicitly handles material determination based on ATP? OR should I write the logic to the material determination explicitly before calling this BAPI?
Regards,
Rahul

As Jurgen has mentioned, material substitution is a part of SD and has to achieved prior to the goods movement BAPI.
Have a look at FMs for the material substitution logic:
RV_MAT_SUB_SAVE
RV_KONDITION_SICHERN
RV_KONDITION_SICHERN_V13A
is there any BAPI or Function Module for Materi... | SCN

Fixing automatic printing of material document for goods movement type 101

Hi experts,
I have a situation, where I want to fix automatically printing of material documents good receipt and transfer posting related to movement type :
101- GR for plant XYZW to the printer AB12 with output type WE03 " GR note version 3" Language EN.
311 - transfer posting plant XYZW to the printer AB12 with output type ZUGT language EN.
Please provide pointers!!

Hi Biju,
Thanks a lot for the information. But I a facing a problem, I have maintained the Plant/Storage/Condition type in OMJ3 with printer also maintained in it.
But, I am not able to generate output when I am doing MIGO for the Purchase order.
I have to go MB02, maintain output type 'WE03' and printer-PL56 in the message tab of material document and then only i can see the spool is generated in SP01.
My output condition type is maintained in MN21, with following parameters; Trans/Event type: WE, Print Version: 3, Print Item: 6 for output type WE03.
Moreover, Do I need to maintain the new printer in the printer settings.
Please help me in getting the material document print output at MIGO only.

Automatic goods movement at the time of confirmation in IW42

Hey gurus,
In a maintenance order i ve reserved some materials to be issued from the stores. Now i am not issuing the reserved materials from the stores and going to iw42 for confirming the operations of the order. If i select the item overview of the operation line against which we have booked the material, in the goods movement section i can see my reserved material which hasn't been issued from the stores. Now when i'm saving the confirmation, goods movement of the unissued material is automatically taking place and the cost of the material is getting booked in the order. How do i stop this automatic posting of material?
Regards,
Abhishek

Hi friend
in spro
Plant Maintenance and Customer Service-Maintenance and Service ProcessingMaintenance and Service OrdersCompletion ConfirmationsDefine Control Parameters for Completion Confirmations
you can define the setting of goods movements
jitender

Error message (M3024) during parallel goods movement

For publication distribution, collected unreferenced deliveries and goods issues are done in SAP system for a customer group by a program which is triggered by a web service every day. Standart SAP functionalities are used in this program. At goods issue part of program, an error message is occuring "Valuation data for material & is locked by the user &" with error code :M3024. The user who processes the program is locking himself. Also we have checked the other goods movement types in standart transactions (MB1B-MB11..)and same problem was occured. We have checked the notes that we applied before for to avoid material lock in paralel goods movement. There is nothing changed both in customizing and deveploment after upgrade. So we couldnt find the way to fix this problem. FIRST ANSWER FROM SAP***************************************** Can you kindly review the attached note 70865 with regards to this issue. WE APPLIED.-- We reviewed 70865 and this solution not applicable for our current system. According to note; We set material late lock exclusive time 15 seconds in OMJI. This solution solved material lock error at all plant level. After this solution, We get same batch error during goods movement(m3862), Then We applied note 157423, this note solved material batch lock error during goods movement, At last we have now m3024(Material valuation error lock) error during all goods movement. THEN********************************* As explained in the note 70865 , to ensure data integrity, it is necessary to block the material against updates by other users during good movements. This is achieved by blocking the material plant (lock object MARC) and the material valuation area (lock object MBEW) exclusively against othertransactions which update the material master. What you can do, as advised in the note, is to activate the late block via transaction OMJI. As a result of this change, several users will be able to carry out good movements to the same material and plant simultaneously. The problem is that you will experience a disadvantage of performance loss after this change. Please, notice that with this change in OMJI, several users will be ableto carry out GOODS MOVEMENTS to the same material and plant simultaneously. This change will not allow the simultaneous input of a goods movement and an invoice for the same material (in this case, the material will be locked as soon as the purchase order item is adopted in the invoice and the error message M3024 will occur). When the error message M3024 occurs, you could check with transaction SM12, there you could find some tables like MBEW are locked by user. The table is locked to prevent valuation, quantity etc. to be updated. System does not check if it is standard price or MAP, as soon as you work with one material it will be locked (its valuation data has to be locked, because otherwise there is no guarantee of the consistency of the stock values. Without this lock mechanism the possibility of serious data inconsistencies could arise). your customizing under: SPRO > IMG > Material Management > Set up Material block for goods movements Here you could choose setting 2(at positing) to have only a short locking period at posting. Please review information in attached notes. 521945 FAQ: Material block 322989 Late block: Number of blocking attempts AT LAST ** PROBLEM STILL GOING ON WHAT SHOULD WE DO TO SOLVE THIS ERROR.

HI Fatih,
Refer to SAP Note 1744780 - Error message M3024 during Invoice Verification process .
In the standard system it is not possible the simultaneous entry of a GOODS MOVEMENTS and an INVOICE for the same material and the same plant.
When you enter the invoice for the purchase order item, the valuation data for the material is updated, therefore this valuation data (table MBEW) needs to be blocked so that it is not changed at the same time by any other transaction (which might cause inconsistencies).
Resolution
This system behavior can not be avoided by any customizing setting or any user exit.
This is correct system behavior to protect the other transactions update the material master.
As advised in the note 70865 :
It is possible to activate the late block via transaction OMJI. As a result of this change, several users will be able to carry out good movements to the same material and plant simultaneously, however there is a risk to cause the data inconsistency and performance problems.

In PM order, can we change the material description for item category N?

Hi,
In Plant Maintenance work order, is there a way to change the material description while purchasing material (item category N) using a material master number? In config. the material description field is open for input. However on the work order components screen it becomes grey as soon as one enters a material master number.
Background: We want to maintain generic material master records in the system and use them for purchasing materials (item category N) on work orders so that the purchasing data defaults from the material master. But we need to be able to change the description per the specific requirement.
Similar functionality works on sales orders. Are we missing anything?

Hi there,
One solution would be to have some generic materials created and used them during work order processing. These generic materials needs to be extended to all the required plants.
Hope this works,
Cheers !!!

Goods movement in QC confirmation for inprocess operation

Dear Friends,
I am doing inprocess inspection for routing operations. After results recording, I get the window where I am entering yield.
If I go to confirmation tab, I can enter the activities and qualntity. But ther I am not getting goods movement tab.
I want assign batch no. to material in the goods movement tab.
How can I get it?
Please help me.
Waiting for reply!
Thanks!
Kiran

No Inputs?????

Good Movement enhancement to Release Price but no Good Receipt issued.

Dear expert,
Need your help on the following requirement,
We have the following movement type called "655"(GD returns QI) where as the movement type act as a receiver for a material but the good movement is not considered as a good receipt which will add stock value based on quantity but not based on amount. Which make the movement type does not do price release based on costing result.
Now our requirement is to make the movement type do price release but still not considered as good receipt which normally does when we do price release. Is there anyway to do this requirement through config or even BADi or customer exit.
Please kindly help.
Best Regards
Suwardi

Enhancement is canceled.

Goods movement in MAM

Hi experts! Just a simple question, does the MAM app make goods movement similar to what MB01 transaction does? Points wil be given! Thanks!

Hi Fede,
In MAM Application scope, when in a Service order , material is confirmed, Goods movement happens when the Service order is synchronized to the R/3.Similarly, when a service order is created via the mobile device, the Material can be consumed from the consignment stock and when the order is confirmed and synchronized with the R/3,Goods movement happens.
Can you please clarify, whether you want to know in general goods movement is possible with MAM or you want to know specific goods movement which happens in MB01 transaction?
Warm Regards
Priya Ghosh

Goods Movement - Supress/Deactivate Automatic Serial Number

Hi SAPers,
Sub: How to supress/deactivate the buttonfacility "Create serial number Automatically" while goods movement.
I have assigned Serial number profile "0001" for certain materials. For any goods movement system forces to give Serial number with a dialog box pop-up (Maintain Serial number as header) in which "search for Serial numbers as search button" and "Create serial nummber automatically". I have a requirement to either suppress or deactivate the functionality of Create serial number automatically. Please advice on this issue.
Thanks
Surendra

Thanks Thyagarajan,
If I select that system doesn't ask for serial number. We have to give manually.
Let me explain you scenario.
Serial number usage should be "obligatory", and system should ask for Serial number.
We have two options on the pop-up screen, 1. Create Serial numbers automatically and 2. regular search option (as an Icon) and also there some icons like "delete", "select all" etc,.
Requirement is: User should not have access to create Serial number Automatically, user should search for the serial numbers and moreover system should force user to give serial number.
Thanks
Surendra

Goods Movement Qty While Confirming the Order

Hi Friends,
While confirming the order The end user Will go to the goods movement screen and enter the actual consumed Qty (When all BOM components Are marked with automatic Back flush) For the components with 261 movement type and will enter the storage location and batch no if required .
Now my requirement is the user should not have the access (it should be in gray) to the BOM Components qty to change
OR
He should not be able to change beyond the qty As per scrape % Given in Material Master or BOM.
The Reason for this is
Even When there is a shortage for BOM components in SL location, he is reducing/Adjusting the required quantities as per the existing Qty ( If there is no stock then making it to ZERO also) and confirming the order.
Pl suggest me is there any user Exit for this or can I do it thru Standard SPRO settings.
hari

Hi,
You can make screen variant SHD0 for CO11N and hide it.
In t code SHD0, give the transaction variant name ( say ZCO11N )of ur std CO11n.
CO11N screen will appear, when u will save the variant, u will getgood movement tab , it will hide now.
Activate the transaction variant.
Regards,
R.Brahmankar

Automatic goods movement for serialized material

We are confirming a material which have two components.
Both the components are serial number managed. can we post automatic goods issue for those components while confirming the header material using backflush indicator or in any other way?

Hi, I believe standard SAP does not supports automatic goods movement for the serialized material.
Regards
Edited by: Sarvan on Mar 25, 2010 4:33 PM

Goods movements of material with serial numbers

Hi,
1. Is there any report or table where I can see goods movement of material with their serial numbers?
2. Also in MMBE i can see 'On order stock'. I know this is PO open PO quantity.
Now this open PO qty will not be there against any storage location. I got some stock on this status in some storage location.
How I can move to 'unrestricted stock' status?
Please advice.

Hi,
Is Serial number is the one obtained thro stadard batch management or is it a Zfield.
On Order stock cannot be converted to unrestircted stock unless a GR is made.
With regards,
Jeeva

Standard cost estimation after goods movement when material ledger is activ

Hi!
our client is activated material ledger, for some materials standard cost estimation is done till marking but not released.
goods movements have been posted for those materials.
Now system is not allowing to release the standar price for those material in the current period, as material ledger expects same price for entrie period.
what is the alternative way to update the standard price for those materials ( with out reversing the goods movements).
regs,
ramesh

Hi Ramesh,
When you are using Material Ledger, after goods movemnets for materials, no need to change the standard cost estimate as Actual costing run will take care to derive the PUP price.
If there is no standard cost estimation release for sold materials (e.g.FG), you will get an error message duirng the billing document release to accounting. To aviod this error, if you are using split valuation (valuation types) and mixing ratios (CK91N & CK94), try with the below steps:
Create a new valuation type for the same material
Crate CK11N & CK94,
Run CK11N
Run CK24.
Then release the billing document.
Let me know if you need more details.
Thanks & Regards,
ADI

Material Description while goods movement in CORK

Similar Messages

Maybe you are looking for