Material difference at plant  in Tcode MC.5

j1idepostock1 is a t code where we display stock value. in that column which is highlight in yellow.
After sumation  that column shown total updated stock value where as it show total calculated value.
So how to show total stock quantity remaining in depo through j1idepotstock1
i attached screen shot here.
and also...
material difference at plant  in Tcode MC.5 & MMBE
(depot)
vs J1IDEPOTSTOCK1
rgds,
Meenakshi

Your Question is not clear...
What was the Stock kept at your depot finished/Any other type..
What was The Statistics update group assigned for the Materials?(Reason for varaition MC.5 and MMBE)
Is there any materials who don't have statistics update groups?(MMR>>>Sales:Sales Org2 view)
Phanikumar

Similar Messages

  • Intial upload of Stock in Transit Material with in plant / Inter company

    Hi Friends,
    How can we do Intial upload of Stock in Transit Material with in plant / Inter company.
    In this case accounting entries has already completed while doing post goods issue (thru SD route) or in 1st step 301 mov. type.
    Now the material is in transit. While we go to new system how can do this without hit of aacounting entries.
    I tried 565, it Intial upload of stock to Blocked, so accounting entries took place.
    Regards
    Sai Krishna

    Hi,
    What I am proposing is:
    At this juncture both plants accounting has been done in legacy.
    Coming to new system whatever stock we upload that much value only updated in receiving plant. In reality there is difference between legacy & new system in this case. In legacy stock in transit value also added in receiving plant (since we did PGI). If we do stock upload with 565 mov. type .. intial entry to blocked stock i.e value of inventory is matching the legacy.
    Actual receiveal of material do transfer posting from blocked stock to unresticted stock.
    What is your opinion. 
    We won't upload the G/L inventory, it will come thru stock upload for kishore infor.
    Regards
    Sai Krishna

  • How to fetch the current stock of material based on Plant?

    Hi Experts,
    Could any one tell how do i need to get the current stock data of the material based on Plant.
    Thanks in advance.
    Regards,
    Abdur Rafique

    Hi ,
    MBEW stores the value of particular stock . T-code to find stock MMBE compare both wiht table and tcode.
    please let me know if you still find any issues .
    Thanks and regards,
    Rajeshwar

  • Authization object to restrict in Plant for tcode PMEVC

    Hi Support,
    In our company peoples are working in tcode PMEVC - Variant Configuration Modeling Environment. Now we want to restrict peoples in plant field. How to do it ? what is the authorization object for it. Can anybody help me for it? If yes then please.
    Thanks
    Asad

    Dear,
    Transaction is used for material types KMAT as per standard SAP.
    Normally for material master, below authorization objects are used:
    M_MATE_BUK - Company code
    M_MATE_LGN - Warehouse Numbers
    M_MATE_MAN - Data at Client Level
    M_MATE_MAR - Material Types
    M_MATE_MAT - Materials
    M_MATE_MEX - Export License Data per Country
    M_MATE_MZP - Customs Tariff Preference Data
    M_MATE_STA  - Maintenance Statuses
    M_MATE_VKO - Sales Organization/Distribution Channel
    M_MATE_WGR - Material Groups
    M_MATE_WRK - Plants
    If you are using KMAT material type and would like to restrict user, use M_MATE_MAR &M_MATE_WRK.
    Regards,
    Pardhu

  • Material in two plants, I run MRP with the BOM is not found in prod plant

    Hi all,
    I have plant 1020 material 12345
    Plant 1020 is the production plant for material 12345
    The material 12345 exists in plant 1070.
    The material 12345 in plant 1070 has no MRP.
    Plant 1020 material 12345 config in MM03
    MRP1 --> MRP Type = PD
    MRP1 --> MRP Controller = G03
    MRP3 --> Planning material = PLAN_1020_GR03
    MRP3 --> Planning plant = 1020
    Plant 1070 material 12345 config in MM03
    MRP1 --> MRP Type = P3
    MRP1 --> MRP Controller = 017
    MRP3 --> Planning material = empty
    MRP3 --> Planning plant = empty
    The BOM in cs11 for plant 1020 material 12345
    has 3 components
    Comp#1
    Comp#2
    Comp#3
    The Dependency is code
    TABLE TB_1020_SUPERBOM (PP_nuance_interne = $ROOT.PP_nuance_interne,
    PP_dim_billette_bom = $ROOT.PP_dim_billette_bom,
    PP_CODE_LONG_BILL = $ROOT.PP_CODE_LONG_BILL,
    pp_component_bom =$self.pp_component_bom).
    The dependency is not found because it is looking for it in the plant 1070 and not the plant 1020.
    When the MRP runs for a Delivery type stock transfer order I get
    CONFIG_1020_BILLET <---- This is the BOM item component field in CS11 in the Basic data tab
    Comp#2
    Comp#3
    instead of
    Comp#1
    Comp#2
    Comp#3
    When I run MRP for the same material, if there's no
    "Delivery based on Stock transfert orders" the MRP associates the correct components
    Hope this explains m'I situation.
    Regards!
    Curtis

    Hi,
    If you want a reply in one line, it would be SAP R/3 does not supoort this feature.
    You will have to go for APO module.
    There are few things which can be done in R/3 side, as in maintaining a scope for MRP run in OM0E, maintaining special procurement key etc etc, but all these will not do any check of stock in another plant & can only help in a very limited way if all any for your specific need.
    But SAP R/3 provides a cross plant evaluation via MD48 to know the stock & demands at all plants, this can help only for evaluation purpose.
    Hope it clarifies.
    Regards,
    Vivek

  • How can i get the open sale orders for given material no and plant

    Hi,
    I have to retrieve the open sale orders depending on the material number and plant.
    For only open sale orders at header level and item level.
    I want to use VBUK-GBSTK to find open sale order at header level and
                          VBUP-GBSTA at item level.
    Can any one suggest me the best logic as performance is concerned?           
    Thanks,
    Kumar.

    hi Prasanth,
    select werks matnr from ZVSCHDRUN into table it_plant.
    sort it_plant by matnr werks.
    select
            vbeln
            posnr
            matnr
            werks
            erdat
            kbmeng
            vrkme
            from vbap
            into table it_vbap
            for all entries in it_plant
            where matnr = it_plant-matnr and
                  werks = it_plant-werks.
    and again i have to write one more select query for vbup.
    am i right?

  • Error during Goods Receipt:Check table XMCHB: Entry 'Material no.', 'Plant

    Dear All,
    I am trying to post Goods Receipt for a Stock Transport Order.
    The error message appears as " Check table XMCHB: entry 'material no.' 'plant', '____' , 'batch no.' does not exist. (message no. M7001)
    The Supplying plant stock from which Goods Issue is done,  is a Normal storage location Unrestricted stock.
    The receipt has to be taken into Vendor stock (Goods Receipt movement type 101 O )
    Inputs will be appreciated.

    technically spoken.
    table MCHB is the storage location segment of a batch record.
    System tries to create an entry in MCHB without a storage location, which does not make sense.
    Vendor stock does not go to MCHB, instead it is recorded in table MKOL.
    If you do STOs then you may transfer vendor consignment stock, but you cannote issue own stock and receive into vendor consignment stock.

  • MM01 -- Update Was terminated while copying the material from one plant

    Hi Experts,
    While I am trying to copy the material from one plant like ETPE to another plant ETPZ , its telling that material created.
    But when we try to display the created material in MM02 for plant ETPZ , it says that material does not exist.
    Note : After creating the material , if we try to move any transaction code it shows the error message box and  says that Update was terminated .
    Kindly help us to resolve this.
    Regards,
    Vijay

    Hi rob,
    we have put the debugging , if there is any badi , enhancement the debugger would have gone to exit or enhancement line but its not going to any where.
    and I have checked in sm13 ..
    its giving the error like update was terminated
    from funtion module : MATERIAL_UPDATE_DB
    Report name :      LGRAPU37
    row : 360.
    ABAP/4 processor: POSTING_ILLEGAL_STATEMENT
    but if we go and see in the row 360 ...
    CALL SCREEN 100 line only
    is there , even if we put the breakpoint in this line , while we are debugging , debugger is not going to that line .
    Note : if we see the screen 100 it shows the empty screen.

  • Extending the material to multiple plants

    Hello Experts,
    I am trying to extend the material to multiple plants and storage locations based on the source material storage locations.
    I am retrieving the data from mard and marc table to check whether that material is already got extended to the given plant.
    I am putting one check in the program to check the material is extended to given plant or not? If the material is already extended then i need to check whether it got extend to the given plant and storage location combinations.
    Can anyone give me some idea how to go with it...
    Here I am giving piece code where I got stuck.....
      READ TABLE RT_MARC
                   TRANSPORTING NO FIELDS
                   WITH KEY MATNR = LW_DATA-MATNR
                            WERKS = LW_DATA-IBL
                                     BINARY SEARCH.
        IF SY-SUBRC = 0.
          MESSAGE I468 WITH LW_DATA-MATNR LW_DATA-IBL.
          CLEAR : LW_DATA.
          CONTINUE.
        ENDIF.
    In IT_MARC I am getting the storage locations related to the source material for the given plants. How to verify this to check of the target plants with the combination of storage locations.
    In the above code after sy-subrc = 0 I need to check for the storage location combination also. I can't retrive the storage locations related to the target plants intially into IT_MARC.
    Waiting for your response.

    Hi , Thanks for the reply.
    But the plants for which data is automatically getting populated , I am selecting only the Foreign Trade view and not all the views.
    Regards

  • Transfer the material from one plant(non valuated) to another plant valuat

    Hi All,
    How to transfer the material from one plant(non valuated) to another plant valuated.
    Which Goods Movement type we required to use.
    Regards,
    Amit Shah

    Hello,
    Please refer the link below. hope it could be a help.
    stock transfer plant to plant
    split valuation
    Regards,
    Jana

  • Material transfers between plants and storage locations report

    Hello experts.
    I´m looking for some help.
    Actually i am looking for a report that show information about material transfers between plants and storage locations. Is there any report that shows the source of the material (plant, storage location) and also shows the target (plant, storage location).
    Thanks for your help.

    Hi,
    Though you may not get report for the same , but you can narrow down the check by using the table MSEG or MB51 using the moment types like 311 643 (sd delivery moments )which are for stock transfers .
    or if you want storage location stock many reports are available like MMBE, or MB53 etc.
    Regards

  • Changing Batch Level from Material Level to Plant Level.

    I want to create the batch class with the class code 22 instead of 23. As the batch class is maintained at the Material Level, not at the Plant Level. So is it possible to change the batch class from Material to Plant Level and create batch class with code 22.
    Kindly suggest.

    Hi, Thanks for ur reply.
    I have applied SAP notes and changed the batch status from material level to plant level...But still i am getting the class type as 23.
    What are the next steps to be done. Currently in OMCT, Batch Level Conversion tab is active and rest all the tabs are in inactive state. so please guide.

  • Material listing by plant wise

    Hi Kings,
                  I want to do material listing by plant wise where can i do customization for this this or i have to do any master data mantainance .
    please help me out very argent
    thanks,

    hi,
    U can try this
    Ur requirement can fulfilled by using combination of fields in condition table  of Listing/exclusion
    menu path:
    Spro-> img>SD-> basic function -
    > listing/exclusion->Maintain condition tables for listing/exclusion--> table 003
    This table u have to assign to the access sequence. Then this access sequence u assign it to the condition type which is maintainesd in the <b>Procedures for maintaining listing/exclusion</b>
    Now try with VB01, then listing/ exclusion for the customer happens at plant
    hope this helps u
    regards,
    Arun prasad

  • Extend the material in all plants

    hi experts,
    can u explain, how to extend the material number in all plants at a time..

    Hi,
    You can use the LSMW for extend the material to all the plants at a time. We have more than 10 plant, we have to extend the one material to 10 plants, 6 sales organization and 4 distribution channels. Through LSMW we will upload at a time.
    Reg/ Shankar G.

  • Add z field in material master at plant level

    I wanna to assign a new field in material master at plant level..
    What settings should be done to do this?
    Positive response will be highly appreciated.
    Regards

    hi,
    You can define the field directly via assigning the field to field selection group...This could also be done at industry sector, plant level as well....
    Check the path :
    SPRO >> Logistics general >> MM >> Field selection >> Assign fields to field selection group...
    SPRO >> Logistics general >> MM >> Field selection >> Assign field at plant
    SPRO >> Logistics general >> MM >> Field selection >> Assign fields at industry sector level...
    For this assign the field to the respective table and then provide it at OMSR...
    Assign field selection group to it...
    Then in OMS9 give the priority for hide/display/req/optional to field...
    If you want this to be added in the new screen, then you have to make the settings under "configure the material master"...
    Hope it helps..
    Regards
    Priyanka.P

Maybe you are looking for