Material disadvantage price change 12 month auto r...

Not sure of the original T&C's, can I walk away from the next few months of my contract? Surely a 12 month tie in becomes null and void if a material part of the contract completely changes?

echodale wrote:
I can't find any t&C's that mention it but surely under UK law you can't lock someone in and then change the price
You're not looking hard enough. It's in BT's Residential Standard Terms, paragraph 52:
"If we let you know about a change to the price or the terms and conditions of a service which is to your material disadvantage, you will not have to pay a charge if you decide to end that service early, unless the Tariff Guide says otherwise. However, once we have told you about such a change, using one of the methods detailed in paragraph 50, you must let us know within 10 days that you want to end that service by giving us the written notice set out in paragraph 21. Only the services that are directly affected by the changes we make can be ended without paying an early termination charge for that service and this agreement will continue to apply to any other services that are not affected by those changes." http://www.productsandservices.bt.com/consumerProducts/dynamicmodules/pagecontentfooter/pageContentF...

Similar Messages

Material unit price change during GR

Hi All,
We are doing import purchase and we have not done any changes for PO price but there is sudden change in material unit price in MIGO.
Please guide
Thanks and Regards
Pavan

Dear,
Kindly check the currency which are maintained in the PO and GRN currency.
There might be difference in the currency.
Regards
Utsav

Material standard price change!

I am trying to do a standard price change for a material using the message type 'materialvaluation_pricechang'
I configured the distribution model view and partner profiles for R/3 and XI.
When I tried to create an IDOC with test tool we19, it got created with status 51 (application doc not posted)
I got the following error. But in config I didn't see the step 'setup sending material prices'. I am working on SAP ECC 5.0.
The error description is as follows.
No Customizing data for valuation area 0013 found
Message no. CKMLSENDPRICE701
Diagnosis
The Customizing data for sending material prices to valuation area 0013 was not found.
System response
No price changes were made
Procedure
Edit the Customizing data for valuation area 0013 under Materials Management -> Valuation and Account Assignment -> Set Up Sending Material Prices
Please suggest.
Thanks,

Please find the code below in bold. I am trying to change the standard price of the material. Hence ls_ckmlcr-vprsv = 'S'. This is why the following lines in the below code never executes
ls_matpr_cr-newpvprs = l_price.
ls_matpr_cr-newpvprs = ls_ckmlcr-pvprs.
And hence the below condition fails.
IF ls_matpr_cr-newpeinh = ls_matpr_cr-peinh AND
 ls_matpr_cr-newstprs = ls_matpr_cr-stprs AND
 ls_matpr_cr-newpvprs = ls_matpr_cr-pvprs.
 l_nochange = 'X'.
 ENDIF.
ls_matpr_cr-newpvprs = ls_matpr_cr-pvprs.
ls_matpr_cr-newpvprs and ls_matpr_cr-pvprs are same in this case and the if condition fails. So no price change document is posted.
Is this a bug? Is there any OSS note available to correct this problem.
IF l_nochange IS INITIAL.
 ls_matpr_cr-newpeinh = ls_price-price_unit.
 IF ls_ckmlcr-vprsv = 'S'.
 ls_matpr_cr-newstprs = l_price.
 ELSE.
 ls_matpr_cr-newpvprs = l_price.
 ENDIF.
 ELSE.
 ls_matpr_cr-newpeinh = ls_ckmlcr-peinh.
 IF ls_ckmlcr-vprsv = 'S'.
 ls_matpr_cr-newstprs = ls_ckmlcr-stprs.
 ELSE.
 ls_matpr_cr-newpvprs = ls_ckmlcr-pvprs.
 ENDIF.
 ENDIF.
 IF ls_matpr_cr-newpeinh = ls_matpr_cr-peinh AND
 ls_matpr_cr-newstprs = ls_matpr_cr-stprs AND
 ls_matpr_cr-newpvprs = ls_matpr_cr-pvprs.
 l_nochange = 'X'.
 ENDIF.
Thanks,

Material Master Price Change

Dear All,
We have maintained Material Price as zero in the material master .Now we want to change the material price to the actual price .What is the process steps we have to follow.
Thanks,

HI,
Go to MR 21 , here give the plant and executte,
Next screen enter the material and new price.
Now you in material master.
Note: consult the inanacill and aloso also any Open orders.
Regards,
Andraaa

Material std. price change

hii
Can we change the std. price of material...if yes..then pls tell me t.code..?
regards
Rekha sharma

hi rekha,
Are you talking about changing the "Price control" (Price control S to V) or just a standard price amount in a material?
If you want just the amount then use MR21. And then give the new value as the new price.
If you want to change the price control then it has few prerequisites prior change it.
You need to delete all open PO line items, Production Orders and stocks.
Then only you can change the control. And it will give all open orders when you try to change it.
If you delete all then you can use MASS to change it mass level.
Hope this will helpful.
thanks & BR
sandun

No notification received of price changes

I have never received any notification of price changes and to my surprise, they they are on my latest bill, including a charge for Caller Display that previously didn't cost me anything.
Now don't get me wrong, I understand the commercial aspect of rising charges but, on the flip side, I also understand the responsibility of the vendor to ENSURE that their customers are advised and not just to say "We've been making every effort to ensure that everyone got full notice of the price changes well in advance. We sent notification to you personally in October and November 2013 via Update magazine (included with your bill), or via emails (from [email protected]) or letters."
Update Magazine is not something I receive as I use e-billing, and I've never received an email from bt.athome with any price rise details. So in this instance BT have NOT ensured I have been kept informed. T's&C's Section 52 "We will also let you know about a price increase or a change to the terms and conditions that we believe is likely to cause you material disadvantage at least one month before it happens. We will do this in writing (which may include by letter, email, with your bill or by any other permitted method). We will let you know about other changes to prices and our terms and conditions with your next available bill or by an alternative method if this is simpler."
This clearly didn't happen. Is this a breach of contract? Quite simple really. YES
So Mr/Mrs/Ms BT, would you care to attend to this glaringly obvious breach of contract and deal with me directly or would you rather we did this elsewhere, perhaps a courtroom??
Solved!
Go to Solution.

I had a lengthy, heated and quite extensive exchange with a Billing Manager today who finally agreed that I had not been notified if the email they apparently sent to my BT email account remains unread.
In light of this, BT have now reverted my most recent bill back to pre-increase prices and I have cancelled the caller display option that was previously free.
Thank you all for your comments. I managed to resolve this by good old fashioned logic and knowledge of criminal and contract law and finally, perseverance. Feel free to contact me when you need to complain next !!
BT - It's good to talk complain

Price change for material with Goods Receipt with out Order reference?

hi all,
Our client company have some finished products produced from raw materials. But we are not using Production planning module. So in MM we are receiving these products with Goods receipt with out order reference(521).
The issue is, the price for this product will change monthly. This new price will affect the existing stock as moving average price calculation.
ex:
                                 Quantity             Price             Value
Stock balanace        100To                 2.00/To         200
Newly produced      100To                 2.20/To         220
after the GRN for newly produced is done. The price also need to change as below.
Total                         200To                 2.10/To         420
This is easy if we receive goods with PO price, as moving average price will updae in the master record.
But here no reference. So only quantity updated with existing price.
So how to achieve the change of price ? Please help.
Thanks,
Aravind

Hi Bijay,
Thanks for the reply. I will use the posting method suggested by you.
but how you are arriving newly produced material quantity & price!
The reply for your comment is,
Every month My client company revise the price of the produced material based on various factors including the
raw material purchase cost.
The price will be fixed for the whole month.
While posting the GRN, the accounts updated are,
Dr Material account
Cr Production Cost
Please let me know what you have asked is answered or not.
So that i can brief more. This is my initial project. So your feedback is very helpful to me.
Thanks,
Aravind

Goods Issue after STO warning "Price change of % in month / for mater"

Dear all,
This is my process for Inter-co plant stock transfer:
1. Create STO via ME21N
2. Raise Goods Issue from source plant via MIGO_GI
3. I get this warning message "Price change of % in month / for mater", details as below:
Price change of % in month / for material
Message no. M7306
Due to action taken the quantity and value of the material are changed. This leads to calculation of a new moving average price: The new price deviates from the old one by .
Procedure
Before you carry out the posting, you should determine the reason for this difference.
You could check the material line items to find out which postings have led to the current moving average price. If the action taken refers to a purchase order, you could contact Purchasing to find out whether a mistake was made when entering the order price.
Has anyone seen this before and what should be the cause of action? Well, I was still able to proceed with the GI successfully but I'd like to know what has caused the message?
Thanks.
Steven

Hi Manohar,
My previous stock was 0.
So i received material 100 qty at 20 INR.
Total stock value = 2000
Now as per you:
2000 / ( 0 *6) * 100 = 33.33
I am not getting 390,17 %
Utsav

MR21 price change for S price material

Hi all,
We are facing an unique problem.
Earlier on 05May, price was updated for a S price material from A to B thru MR21 having posting date 01May. Price change document and its accounting document has got generated successful. On checking the price on 25May, price is A i.e. Old price. I listed the price change documents for the material, I was not able to find the any document after the above said date. So far the movements has happened in old price.
Further I checked in MBEW, price is A i.e.Old price. In table MBEWH for the april period, price is B.
New price has got updated nowhere apart from MBEWH and price change document.
Anyone can advice, how this has happened. What is the reason
Regards
Suddy

you are working with a fiscal year variant, as your fiiscal year does not match with the calendar year.
In general the month of the posting date is equal with the period, however, using a fiscal year variant the posting date is checked against a customizing table to determine to which period the posting has to be made.
Those variants are defined in OB29
and they are assigned to company code in OB37.
so check OB37 first to find which variant is assigned to your company, then use OB29 to see the definition of the variant.
Maybe the first day of the new month is defined to fall into the old period.

Raw Material price change and its effect in costing of Quotation.

I have a scenario in which the Quotation is given on 11th May, and the costing of the Order is done where the Raw materials Details along with overhead costs is determined, and then sales value is quoted, after the production is done after 2 months, and at the time of dispath there is a change in the price of raw materials. The user wants to known that the net loss or profit against that order due to price change in the Raw material.
Will it be possible at the sales Order Level and whether it will give the costing as per the current RM rates.

I think the best way is to use a Make to order scenario with cost calculation in the order. the calculated cost is then stored in EK02 condition, the at invoicing time you can calculate the variance in CO/PA between real cost and estimated cost.
You have to ask the help of smart CO guy to do this.
Roberto

Material Price change mr21

Hai
Any body can explain material price changing procedure. step by step how to we do this.
My client ask to me change material price for costing run month end.
Regards,
Basha.

Hai
I have to change material price, can any body tell me what is procedure for price change
step by step with transaction codes tell me.
I read some information in this tell tc ckmprp, ckme, and mr21 what is difference between this tc s and also ck24
can any body tell step by step how i follow ( what is TCs for this )
I am new for this material change so tell me step by step how i follow
Edited by: Shaik Jani Basha on Sep 28, 2011 2:17 PM

Price change in material master

Hi,
When does the moving average price change, if the PO price or the invoice price is different from the one in material master. Is it after the creation of PO, GR or invoice?
Thanks and regards
Aparna

Hi,
Moving Average price = Total Value
Total Stock
Moving average price updates once you make GR and IV
If you are making GR & IV for new po , then new moving average price of that material will be :
Total stock = stock already present in plant + GR made stock of that new po
Total Value = Total Value of the material in plant + Invoice amount for that new po
Thanks & Regards
Prashanth.venkategowda

CO88-Error :Perform the planned price change for material

Hi Experts,
While running CO88 i get this error. "Perform the planned price change for material ". My material is manage at S and it doesn't have any marked cost. The status is FR and no other status on cost etimate for the article are active. what i shoul do? why if i run the PP order with KO88 i don't have any error?
Please help i'm facing the closing period.

Hi,
If dynamic price change is active in your system the first posting in the new period of this material tries to
- release a future cost estimate of that period OR
- change the price to the future price in accounting view
(if the future price date is reached)
Unfortunately this dynamic price change does not work in order settlement. Therefore you are asked to perform the price change first by t-code CKME (or CK24).
If you are using price determination control 3, any price change or release should always be the first transaction in a new period to avoid any inconsistencies.
The dynamic price release will only release the price with transactions which involve material movement and this is not the case by posting invoices and order settlements.
if you are in period 12/2009 then a settlement in 12/2009 does not require the release cost estimate of 01/2010.
But if you are already in 01/2010 therefore settlement in 12/2009 is a posting into the previous period. This will change also data of the current period. Therefore the cost estimate has to be released first.
Another option, if you don't want to receive this message, would be to change this message from Error to Warning (check note 434752).
Please follow the following steps:
T-CD:OMRM
Message M8 394
=>you set the message type to '-' for error message M8394, that means no message is to be issued.
regards
Waman

Price changes of a material

Hi all,
I need to list the whole price changes of a material that we purchased from suplliers.
How can i get these data, ie from which tables?
Thanks in advance.
deniz.

Hi friend,
Try FM
CKML_MATVAL_PRICE_CHANGE
Also check the tables :
CKMLHD - Material Ledger: Header Record
CKMLCR Material Ledger: Period Totals Records
CKMLPR Material Ledger: Prices
Regards
kanishak

When material price changed (sd item conditions)

Hi all,
when material price changed in the time that is used in an sd order and when this order's delivery has been created..
the order's item's material's price has been changed before invoice printed(assume item as 10 and material assume as 600300)
i need to update that order with the new price of the material.
Even this can be done backward. I mean you may have an order that amount is 100,000(with different item no's) and send this at 20 times and may print 20 different delivery for this order. And order can be on January and you still send the janu's order at May. Whenever you send the delivery you have to update the respective item's price not others.
All in all i want to update the order's price item by item...
please write any way to solve this.
Thanks..

Hi,
it does not matter if the BADI is already implemented. You can add your additional logic there. If you put break points in all methods of BADI implementation and run ME2xN then you will see when is each method called. You are right that here is no BADI method SET_DATA. What I meant is that you get a reference to PO item (type IF_PURCHASE_ORDER_ITEM_MM) in BADI method PROCESS_ITEM. This interface has to methods GET_DATA and SET_DATA. Using these methods you can get current item fields and change them according to your needs.
Cheers

Material disadvantage price change 12 month auto r...

Similar Messages

Maybe you are looking for