Material Document No ranges

Hi all,
Can Material Document No ranges be changed for every fiscal year ?
say i want to discontinue the existing no range series and start the document range with a new series for the new fiscal year .
is this possible ?
i tried doing this but the system is not picking the new inverval for the year .
what could be the probable reasons
thanks

Hi,
We have to maintain Number range for Material Document with the start of New Fiscal year, with Fiscal Year as Primary Key.
We need to maintain Number ranges for New fiscal year.
regards,
Prashant Rathore.

Similar Messages

  • Material document no. range

    Hi experts,
    For outbound delivery, there's a material document no. range after PGI or reverse PGI. Where are this no. range defined?
    Pls advise. Thx.

    Cathy,
    Material Doc number ranges are defined in OMBT.  The path is IMG>MM>Inventory Management and Physical Inventory>Number Assignment>Define number assignment for material and phys inv docs.
    Regards,
    DB49

  • Material Document Number Ranges

    Hello Friends,
      We have a business requirement to differentiate the material document number ranges.  In our process, we have intercompany and third party scenarios and the requirement is that system has to determine different number series for third party goods issue and intercompany goods issue.  Currently as per standard, system deriving the unique number series for intercompany and third party goods issue since th event type is WL.
    Kindly provide your inputs on how we can differentiate the number ranges.
    Thanks in advance
    Best Regards,
    Goutham

    Hi,
    You could try to make it through the transaction code following  the process as below:
    First u need to create seperate document type in OMR4 or OBF4, then create a new number range in OMBT assign your new number range to new created document type then in T. code OMBA assign new created document type to the transaction code so whenever u will create document with this Transaction code u can get new number range.
    I hope this helps!
    Best Regards,
    Arminda Jack

  • Material document number range to matchthe accounting doucment number range

    Hi all,
    SRM 5.0 ECS.
    We have a reqt to match the material document number range and the accounting doucment number range for goods receipts  in ECC ...Is this possible???If so,how??
    Thanks.

    It may not workout .
    Material document number range configuration should be unique other wise lot of confusion.
    since material docuemnt and account documents uniquely identified by Year and Number.
    some times one material number and two accounting documents can be created while doing good receipt.

  • Different material document number range for Services

    Hi,
    I want to make different material document number range for services.
    I have created ZE document type from WE .
    But if I see group in OMBT , i am not able to assign ZE there. How to do this?
    Regards
    Kedar

    Hello,
    No ! I am not able to see ZE there.
    Kedar

  • Material Document Number range for 2011

    Hi,
    As per standard practice we need to reset the number range for material document for calendar year 2011. New Number range will be effective from 01.01.2011.  Please let me know the below -
    1.     Step by step process for Number range assignment for Material document (GR / GR / Transfer posting) for 2011
    2.     Can we define Material document number rage financial year wise (Apr to Mar) like other FI documents number range? This issue is raised by finance dept. IF yes what will be the process?
    At present Number range assignment for our company is showing Year as 9999, from number 5000000000 and to number 5000000000
    Whether it is mendatory to re-ser number range.
    Thanks,
    Ranjan Kumar
    Edited by: Ranjan.pearl on Dec 29, 2010 2:51 PM

    Number ranges for Material document are maintained in OMBT.
    But there is no need to maintain different number ranges for material document as same as financail document. Financial documents are year based whereas material documents are not.
    Also if you are maintaining the material document number ranges as per year specific, then also same document number cant be used. But in case of financial document, the document number can be same i.e year specific.
    Different number ranges for Material Document :-
    Then assign the specific interval for a specific year like
    Year      From Number           To Number
    2001      0100000000     0199999999
    2002      4900000000     4999999999
    2003      5000000000     5999999999
    2004      0200000000     0299999999
    Still any queries, revert back.

  • Material Document Number Range query

    Hi all,
    How can I create Materila Doc Number Range Groups and elements  .  Pls note I want to create it new one and DO NOT WANT TO USE STANDARD .
    Also how can I assign or relate or link this groups to Company code or Plant
    Regards
    Bhushan

    1. go to MMNR Transaction
    2. click GROUP - change mode
    3. go to menu: GROUP -> INSERT (F6)
    4. maintain new group data and material number intervals
    5. save
    6. assign proper material types to new group.
    If you want to control material number you can use enhacement:
    Source: IMG help:
    "enhacement MGA00002 (for industry) or enhancement MGW00002 (for retail) for this.
    For more information, see the documentation for the following components assigned to these enhancements:
    Industry
    EXIT_SAPLMG02_001
    EXIT_SAPLMG02_002
    Retail
    EXIT_SAPLMG72_001
    With the exception of the transfer structure, this function is identical to customer enhancement MGA00002 for material number assignment for the material master for industry. Please see customer enhancement MGA00002 for more information and for sample coding.
    EXIT_SAPLMG72_002
    With the exception of the transfer structure, this function is identical to customer enhancement MGA00002 for material number assignment for the material master for industry. Please see customer enhancement MGA00002 for more information and for sample coding.
    EXIT_SAPLMGNK_003"
    Hope it helps.
    Regards,
    wojciech

  • Material Documents number range

    Can set number range for Material documnets as a year dependent ?
    How to set it?
    In our system I am not able to set new number range for the new Fiscal Year . There are predefined number ranges . with validity year 9999. and year field displays gray . Also there is no optin for new entries
    I need new number range for new current fiscal year .
    Pls help . If possible in some detailed way

    Hi,
    Go to OMBT, click on Group in change mode, select the material doucment which you want. Then click Shift + F5, then select the line which shows year as 9999, then click F6. Now specify the year & give the number range interval as per your need.
    Save & then transport the number range to your production system.
    Regards,
    Vivek

  • Material Document Number Range

    Hi,
    What is the meaning of setting number range as
    Year    From Number    To Number     Current number
    9999    4916000000       4916999999   4916568199
    My understanding is we do not need to set sepeate number for every year once we set 9999. Is that right ?
    Thanks in advance.
    Gopinath

    Dear Gopinath,
    Yes , your understanding is 100% correct .
    we can configure number ranges as year depenedent and year
    independent
    if we are using year-dependent number ranges     
    that you specify same year by year.                                                                               
    01 2008 0100000000 0199999999 100000201    
    01 2009 0200000000 0200000203 200000000
    But when we specify it as year independent , it looks
    as below.
    01 9999 0100000000 0200000203 100000203 
    Regards
    Vijayesh  V V

  • Change Number Range of Material Document

    Hi Guru,
    We have a requirement to change material document number range that depend on movement type.
    I have check in SPRO and read some document for material document number range.
    I understand that this is a standard SAP.
    - GR from PO or Order         Number Rage will be 5000000000 to 5099999999 and Fiscal Year
    - GR Other, GI, Transfer      Number Rage will be 4900000000 to 4900000000 and Fiscal Year
    My question is Can we change this number range?
    I guess that we have to implement BADI or User-Exit to determine new number rage but I don't know how to do this.
    Please kindly advice or guide me.
    Thank you very much.
    Saiyaman

    Hi,
    Insted of Movemen ttype you can asign seperate number range to a transaction code follow the process as below
       First u need to create seperate document type in OMR4  or OBF4,   then create a new number range in OMBT  assign your new number range to new created document type then in T. code OMBA  assign new created document type to the transaction code  so whenever u will create document with this Transaction code u can get new number range.
    regards,
      zafar

  • Number Range gap for Material Document

    Hi folks!!
    I am trying to T.Code SNUM to control the buffring of Material Document Number range.
    I want to know through which Object I can do this?
    Best regards,

    Dear,
    Go to Tcode SNUM...
    ENter object as "MATBELEG"
    Click on edit button..Now it will take you to next screen...
    Go to Edit--Set up buffering-No buffering.
    Regards
    Utsav

  • Document Nr. of Material Document

    Hi. This is question about Document Nr. of Material Document.
    My customer plans to rollout his MM to several group companies.
    And he wants to differenciate document number ranges per his each group companies.
    However, from SAP's standard specification perspective,
    document Nr. range of Material Document is not company code dependent.
    And since its document number buffering is on, numbering gap can be happened.
    I would like to know the background for this SAP's standard specification.
    Could anyone explain me?
    My assumtion is;
    1)During the fiancial audit process, starting point is FI document.
    And SAP FI document number range is company code dependent and ,
    due to it does not allow document number buffering as a default,
    numbering gap is not supposed to be happened.
    And for this audit, since Material Document is support document of FI document,
    its characteristics such as company code independent and existance of numbering gap are not issue.
    Almost same to business audit process, staring point is PO and SO, then
    Material Document is support document for PO and SO.
    2)By buffering on for material document number range, it contributes to reduce processing time.
    BR
    Kimura

    Hi,
    You can not  set different number range for your different company code as the number range is only defined at the client level against the material document type in std.
    If you want diffreent number ranges then try with any development with the help of Technical team.

  • OMX4 - FBN1 - Number range for Material document and FI document

    47 - is for FI document number range in Material ledger FBN1.  OMX4 gives number range for Material document.  My question is how big the number range must be?  Since thousands of Materials involved, I couldn't imagin this?
    Anybody knows, how to determine the size of no. ranges in Material Ledger configuration?  SAP simply says, check no. ranges whether it meets the requirement....
    I don't expect an answer again, just check your business, how many transactions would be in a period, which is not quantifiable now?
    I would like to understand this from somebody's experience of using insufficient or excessive no. ranges, especially in this area.
    Cheers,
    Ashok

    What is the number range you are using? Year Dependent or Independent?
    When you don't know the document number consumption pattern you should use Year dependent number range in both OMX4 & FBN1. Observing this for a month will give a rough Idea and observing for a Quarter will give you a fair Idea and the result for a year gives almost near to accurate consumption of number ranges.
    The generation of documents is dependent on the number of materials and Profit centers involved. As much as possibe use Summarization at profit center level when posting to FI. This will reduce the number of documents and line items that are getting generated.

  • Material Document range number.

    Hi everybody, How can i do to create a different range of material document numbers, for differents storage locations? Regards.

    It is not possible to have a different sequence for material documents at storage location level.
    There is a practical difficulty also:
    One material document can have multiple storage locations (both receiving and sending). What number range should be used in such cases?
    Lakshman

  • Range of Material documents

    Hi,
    We need to reload all the inventory data to BW because of some double loading in BW.
    We may not able to use posting date for reloading, but might left with one choice by document numbers in OLI1BW.  Since OLI1BW only allows by range for mat docs (not multiple) , how can we check for possible range.
    Also we need to check for any overlay, break in ranges, etc., to avoid double loading of certain records
    Regards
    Dyuthi

    Thank you Dinesh for the reply....
    But  I just need to analyze the possible range of material doc numbers used in OLI1BW.
    How can I find out the possible range of material document in OLI1BW?
    Regards,
    dyuthi
    Edited by: Dyuthi mc on Jun 16, 2009 11:11 AM

Maybe you are looking for