MATERIAL DOCUMENT not display in fb03

Hi
when I entering the material document no xxxxxxxx in Tran code fb03.The s/m doesnt show the material document.it gives error document no xxxxxxxx not exist in fiscal year 2009 or has been archived

hi,
You need to know the acocunting document number which is different from Material doc number...
In FB03, you shd enter accounting doc number not material doc no.
please confirm the accounting doc no. invoice which you have posted ie. from MIR4...here check the FI doc. number as well..
and then put that num. at FB03....
Regards
Priyanka.P

Similar Messages

  • Document not displaying in FB03 but displaying at table level

    HI
    I have a particular document number which is not displaying in FB03 or in line item display. Buton searching in table FAGLFLEXA the document is existing for the fiscal year 2009.
    Can anyone tell me the reason why something like this might have occured?

    Hi
    Even if a document has been parked it should still display in fb03, in the table entry the company and fiscal code are correct.

  • Document not display in FB03 ?

    HI
    All Experts,
    One document posted on 09.07.2009 is not able to display in FB03. However I am not able to know that whether that
    document is archived or deleted ? So any one can tell me how would I know that what happened to document ?
    How to see the archived documents or deleted files ?
    Your help is appreciable experts.
    Regards,
    Pankaj.

    Hi Gurus.
    I noted by Tx. S_ALR_87012342 that I have the same problem that it could be be given by the creation number range. "Displaying only GAPs"indicates me the wrong documents numbers.
    My error happens when I try to delete in 2013 year , documents from 2012 by Tx. FB08. When I delete the document, SAP tells me that a document has been created, but then I do not see the ocument. My range number for deleted documents does not depend on year. I do not understand how I can fix the problem.
    Pankaj Bhalerao. Whis was the report given by SAP to solve the problem?
    “Note 175047 says: Report RFBNUM00 (as well as new RFBNUM00N Report) has document number gaps for the number ange object RF_BELEG ...
    An only gap now exists document number if no other data has been updated except for the document number. If document data is partially available, this is caused by a different error(partial update termination, and so on)."
    I do not understand this last part. Could you explain me this?
    Thanks!

  • Stock & Material documents not displaying

    Hi All,
    The matrerial documents are not avialable against the articles movements for few articles in perticular valuation area.
    The currently existed stock displaying even privious periods also in perticular valuation area/plant.
    If you have any idea please share..
    Regards
    Raj

    Hi Raj,
    Can you please let us know which is the transaction code you are using to see the material documents. 
    If it is MB51 make sure about the selection screen parameters. And also ensure that if the output is in ALV format, there is no filteration is maintained. 
    Hari.
    Edited by: Harikrishnan_sap on Aug 14, 2010 4:47 AM

  • Invoice payment made but document not displaying

    HI gurus ,
    I have made an invoice payment  but the document  is not displaying in FB03. How could I know if the posting went through properly or not?
    many thanks for your help
    regards
    cecile

    Hi,
    TIP 1]
    in F110 ( payment run ) you can find a icon Payment ( that one that looks like a paper scheet ). This is payment log and here you can also find which documents were posted by payment and also by which open postings positions. This requires by payment run addtional log check box and vendor/customer number.
    TIP 2]
    In FB03 you can find also by using dynamic selection and selection option Transaction with value "F110" than a list of documents posted in F110 will popup. With another dynamic seletion option it will be more accurately.
    TIP 3]
    Use FBL1N with specific select option to see cleared items to specific date. By generated list of line items you can find your invoice and clearing document as wrote Nitin abov.
    Hope it helps
    Jan

  • He material is not displayed as valuated Sale Order Stock

    Sale Order has been created and MRP execution is done at MD04.
    The Sale Order is released as Production Order.
    But when I am executing T Code  MBBS I am getting error message syaing
    The material is not displayed as valuated Sale Order Stock.
    Diagnosis
    The system has not found any stock that satisfies the selection criteria entered.
    Possible reasons for this are:
    The material does not exist. Have you entered the right material number?
    Your selection is too restrictive. The system was not able to find any stock that satisfies all selection criteria.
    The stock balance is zero.
    Procedure
    Check all the selection criteria you entered.
    Stock overview has displayed enough stock for material.
    Please adivse me how Material  can be displayed as valuated Sale Order Stock at MBBS.
    Regards

    Hi,
    Check whether the Production order execution is done and any GR has been done against the Order.
    Once the above is done, check in MBBS, the stock will sit in the Valuated SO stock.
    Even wait for any other replies.
    Thanks & Regards,
    Ravi Kumar

  • Info Record Text and Material Text not displayed in Subcon. PO printout

    Hi,
    I have this scenario, where the Info record text from Info Record PO text does not appear in Print out but appears in Print preview.
    Also the Info record text for  standard Purchase order is displayed in Print preview and Print output.
    The config settings for texts for Purchase order is the same for Purchase order with no Item Category (Standard) and Subcontracting (item category L).
    Also the texts in Purchase order automatically copies in Standard purchase order (adopt button not present) but not in Subcontract purchase order (Adopt text is present).
    I have checked the config for copying rule, for Info record text is automatically adopt.
    I am unable to identify the missing config for this.
    Also the same problem exists for Material text from Material Master PO text is not displayed in Fax output but appears in Print output.
    Please let me have your inptus,
    Regards, Muthuvel

    The solution to this is SPRO->SAP Reference IMG->Materials Management->Purchasing->Messages
    ->Text for Messages->Define Text for Purchase Order.
    Select Texts for Document Item folder - There will be a list by Document Type and Item Category. Make sure there are entries for your combination, otherwise they will not be part of the output message.

  • Material document not updated in Table MSEG,MKPF

    Hi,
    when i post the GR, Materail doument is posted and matereail doument number is shown, but when i go to Display mode of the materail docuemnt number. the message is coming" document numberXXXXX does not exist in calender year 2010" Message no: M7062.
    if i see the tables MKPF,MSEG,EKBE there is no entry dispalyed..
    due to this problem my work is pending in all Procure to pay scenario..
    can you provide the solution..
    regards,
    Obulesu

    Hi,
    Check the number ranges for material documents. (with year) for document type WE in OMBT transaction code.
    If same material document number repeats in the same calendar year,then document update will be terminated.
    As, document no. will be already existing in tables, system won't allow to update the same no. again.
    Thanks & Regards,
    Anand.

  • PO Material text not displayed in PO

    Hi All,
    Please help me in finding a solution for my issue,
    We use SAP ERP 6.0, and recently upgraded from SRM 4.0 to SRM 7.0. whenever a PO is processed in SRM and replicated to SAP, "Item text" inputs entered in SRM is replicated to "Material PO Text" in SAP and when the PO is printed, those inputs are not displayed in the PO..
    However if I amend the same PO again in SRM (by just modifying the inputs in "Item text") and re-replicate to SAP and reprint the PO, the inputs are displayed in PO this time. becoz of this, we had to amend every PO again to have the Item text displayed in PO.
    Why the inputs are not displayed in PO at the first time and what made the system to display it after i amend the PO the second time???
    Any help is much appreciated.
    Thanks
    Vinoth

    Nabheet, Thanks for your response.
    I have already raised this with the tech team and they said they antcipate this to be fixed by this March. I have no idea if this takes so long to fix it. Since we had to process 100s of POs every day, it is affecting our SLA badly
    Vinoth

  • Material Document not getting posted.

    Hi Guys:
    Material document is not getting created when i try post the inventory difference using transaction LI21 ( Clearing of differences in Inventory Management ).
    we are using WM , so physical inventory is carried out at Bin Level.
    Did I miss anything in the config setting?
    Thanks
    Sweth.

    Hi Jurgen:
    do you have a pick or putaway quantity in this quant in storage type 999 ?
    Yes , in the available quantity I could see the -ve quant ( Goods Issue/Pick)  and + Quant (Goods Receipt/Putaway)
    is the quant locked?
    Quant is showing with unlocked logo.
    is somebody else in change mode in that quant?
    Nope
    is this the only item in your inventory document?
    yes
    have you tried to execute LI21 in background?
    I don't how to do that ,
    do you require to enter a reason for the difference?
    I didn't see that question Popped Up.
    Thanks for the help.
    Sweth

  • Material document not created for scrap

    Hi all,
               I am doing confirmation and goods  movement through Co11. When i enter more yield than planned and some scrap the goods movement are posted ,but there is no material document accounting for the scrap. Also after the final confirmation the order status is still PCNF. Please give your suggestions.
    Looks like I am missing some configuration,do let me know.
    Thank you all.

    1. The scarp qty that you enter here will not generate the material document.
    Reason:
    The scrap enter here proportiantely increases the consumption of the components but will not produce any FG or Byproduct for the materail.
    2. When should we use this .
    For scenarios like : If you are wokring in chemical industry when youproduct 10 litres of paint .25 litres of the material gets scrapped as residue and you just mix it to your sewage line : Here the FG paint whichere gets scraped is not accountedd as separate mateiral but we need to consume the component
    in such scenarios only the scrap should be entered in the co11
    3. Also if you need to catch the activity cost then this will be used
    thanks and regards
    i am also intresed to get different answer

  • Attached document not opening in FB03.

    Hi ,
    I am using an error while checking uploaded attchment in the transaction FB03.
    When any file(ex. pdf) is uploaded from presentation server, it is uploaded successfully and able to see the content .
    But when the same file is downloaded on the application server path and then try to see the content, it gives the errror message .
    The file is attached to the document with the FM 'SCHM_HTTP_CREATE_FILES' and then attched to the document with FM
    'ARCHIV_CONNECTION_INSERT'. The file is seen in attachent list . But when trying to open the file , getting the below erro.
    HTTP error: 404 Not Found  Document not found: Document '537B79574C7C0173E10080000A43209B' not
    found on server 'contracts_dev'.
    Thanks in advance ..

    Have you checked to see that the SAP user has rights to the folder that you are trying to write to?
    Neal

  • Material document not updated in inspection lot QALS table

    HI
    The inspection lot created for 04 inspection type  during Goods Receipt.
    The material document is appearing in the inspection lot but found not updated in table entries.  i.e.., QALS -MBLNR
    When i checked other inspection lots it was found updated. How this happened ?
    Any Snote to be applied?
    Thanks

    Hi,
    Check the number ranges for material documents. (with year) for document type WE in OMBT transaction code.
    If same material document number repeats in the same calendar year,then document update will be terminated.
    As, document no. will be already existing in tables, system won't allow to update the same no. again.
    Thanks & Regards,
    Anand.

  • Pages:  Documents not displaying in Itunes

    I have several documents in my Ipad in Pages.  But when I sync to Itunes, they are not displaying under the app.  I want to shift drafts to my PC from Pages.
    Is e-mailing really the only way?
    As an aside, it's not a good app - downloading to the iPad, many times whole sections are omitted, for no obvious reasons.

    As an aside to your aside .... You have to be using Word on your PC since Pages is not made for Windows. I'm not defending Pages at all - you will have compatibility and formatting issues going from Pages to Word and from Word to Pages. There are issues with Pages on the iPad to Pages on the Mac. I use Pages so I know from first hand experience.
    The documents that I am creating are very basic and I don't have big issues, but still there ares some nonetheless.
    At some point, you may want to look at an alternative to Pages - maybe Documents to Go.??? I use Pages, but from what I read around here, Docs to Go has better compatibility with Word files than Pages.... Just something to think about.

  • Material document not generated

    Hi gurus
    I created a outbound delivary and PGI is also done.
    But it didn’t generated any materail document.
    Can any one help me??
    Reward points.
    kishore

    <u><i><b>Posssibilties of causes of ERROR is</b></i></u>
    1. Scheduling line category wrongly determined which may not have any Movement Type linked to it.
    2. Wrong determination of Item Category.
    3. check the No. Range of Material document in T.code: <b>SNUM</b>
    Please got to LOG and see what it tells.
    If you don't mind, can you little bit elaborate on the error.
    Regards,
    Anbu

Maybe you are looking for