Material document not updated in inspection lot QALS table

HI
The inspection lot created for 04 inspection type  during Goods Receipt.
The material document is appearing in the inspection lot but found not updated in table entries.  i.e.., QALS -MBLNR
When i checked other inspection lots it was found updated. How this happened ?
Any Snote to be applied?
Thanks

Hi,
Check the number ranges for material documents. (with year) for document type WE in OMBT transaction code.
If same material document number repeats in the same calendar year,then document update will be terminated.
As, document no. will be already existing in tables, system won't allow to update the same no. again.
Thanks & Regards,
Anand.

Similar Messages

  • Material document not updated in Table MSEG,MKPF

    Hi,
    when i post the GR, Materail doument is posted and matereail doument number is shown, but when i go to Display mode of the materail docuemnt number. the message is coming" document numberXXXXX does not exist in calender year 2010" Message no: M7062.
    if i see the tables MKPF,MSEG,EKBE there is no entry dispalyed..
    due to this problem my work is pending in all Procure to pay scenario..
    can you provide the solution..
    regards,
    Obulesu

    Hi,
    Check the number ranges for material documents. (with year) for document type WE in OMBT transaction code.
    If same material document number repeats in the same calendar year,then document update will be terminated.
    As, document no. will be already existing in tables, system won't allow to update the same no. again.
    Thanks & Regards,
    Anand.

  • Customer number not in the inspection lot for a make to order scenario

    Hi All,
    I know that standard SAP will get the Customer number into Insp. lot only for insp. types 10/11/12.  I am wondering if someone know a way to get the customer no. into insp. lot for insp. type 04 where the material is make-to-order scenario and the Production/Process order has the Sales order and customer no. without activating User-exit.  The quality users want to be able to see the customer no. in insp. lot without having them to go to process order. 
    It makes no sense to me why the customer no. is not brought into insp. lot when that is available in the Prod/process order, which can further be used to select the customer specific insp. plans for 04 insp. type Insp. lot without using Variant configuration.
    Any light on this topic is appreciated.
    Thanks.

    Hi Srikant,
    I guess.........
    Normally the inspection lot refers the triggering document that are the trigger cause for them.
    - Inspection type 01: - Purchase Order and GR material document.
    - Inspection type 03: - Pro. Order Number
    The same way...
    The inspection type 10\11\12 are purely related to the SD, and directly integrates QM and SD. Hence in the inspection lot for the inspection types directly integrated to SD, it will furnish the Sales order number \ Customer.
    But the inspection type 04 is purely have it's relation to Production process. So it will have the details related to integrations it has i.e. the "Pro. Order." Hence it integrates QM-PP, it have the data related to PP (Pro Order), not the SD's one.
    But I think one way you can achieve it,
    Assign the Customer number also to the inspection plan along with the Material. So I think at the time of assigning the inspection plan to the inspection lot, it will refer the Customer number also and will display the Customer number along with Task list Group\Group Counter, in the inspection specification screen in QA03/02
    Regards,
    Shyamal

  • Tasl list not coming in inspection lot

    Hi i am facing one problem. I have creatd one inspection lot automatically from GR. Noq in the inspection lot in Inspection specification no task list assignment is coming. Also when i click on the tab Task List/Spec in inspection lot it is giving me message No inspection plan could be found. I am using inspection type 01 in matrial master ans usage in inspection type is 05, same usage type i am using in plan. I have assigned MIC in plan . Also in material amster the inspection with task list has been selectd. Sampling procedure i am using sampling type percentage % 10 %.
    Can anyone tell me why this coming

    Hi,
    I have creatd one inspection lot automatically from GR. Noq in the inspection lot in Inspection specification no task list assignment is coming.
    Please check whether you have ticked  'insp. with task list' at material master  details for Inspection type.
    Also when i click on the tab Task List/Spec in inspection lot it is giving me message No inspection plan could be found.
    Please ensure that  the quality plan is made on or prior to the date of  GR, if  lot is generated on 15.04.2010 then quality plan has to be made on that or before that date. If you make on 16.04.2010 system will not accept.
    I am using inspection type 01 in matrial master ans usage in inspection type is 05, same usage type i am using in plan.
    Please check that you have released the quality plan (selected 4 status)  and plan is not block
    I have assigned MIC in plan . Also in material amster the inspection with task list has been selectd.
    Sampling procedure i am using sampling type percentage % 10 %.
    No issue  this is correct.
    Please revert if issue is still not resolved.
    Best Regards,
    Shekhar

  • SAP DMS Link to Inspection Lot QALS

    Hi experts,
    Can anyone tell me how to implement the Object Link to inspection lot.
    Am using EHP 6.and found that there are some notes to be implemented note.
    Does anyone have worked with the DMS Object link with Inspection lot.
    request you to kindly let me know the solution at the earliest.
    regards,
    veeramani

    Hi tilak Raj,
    Thanks for the reply.
    Can you please suggest me.
    For Inspection Lot object link, i have seen some note .and there is a option to go ahead with the link that you have mentioned.
    Can you please suggest me by which method i can achieve my requirement easily,since am going to use the Screen number 500 which is a dummy screen in DMS.
    Also the attached Documents to inspection lot should visible in Results recording.
    is there any standard switch or business Function for the DMS Object link to inspection lot  ???
    Please suggest me ASAP.
    Regards,
    veeramani

  • BAPI_INSPOPER_RECORDRESULTS:result does not appear in inspection lot...

    Hi,
    I am using BAPI_INSPOPER_RECORDRESULTS to record inspection lot result at characteristic level.
    When I use this BAPI, it does not give me an error.
    But the values against each characteristic does not appear  in the result field of that characteristic.These are not getting updated. system status shows INSP RREC.
    I am passing the result value as  "mean-value" field in bapi charresult table..
    what is the solution for this?
    I am trying BDC for the same purpose in tcode QE51N. but in between there is error msg promp..so BDC is not working after that promp as it is asking for user entry for the mandetory field "Engineer's name"..
    Kindly provide the solution..

    Hi,
    maybe QE11 is an option for recording results vai BIM.
    Cheers,
    S>

  • Automatic Inspection lot not generated for Inspection lot origin 12

    Hi all,
    I am not able to trigger the automatic Inspection lot for General Delivery i.e Inspection lot origin 12.
    The scenario is, I am creating the STO ( Inter company stock transfer) and against the same STO i am creating the delivery but after delivery inspection lot is not generated. In the material master correct inspection type is maintained also the mvt type 641 is active for QM. The inspection lot origin is assigned to the delivery type in the configuration but still i am not able to generate the inspection lot.
    Please let me know i am missing something?
    Regards

    Hi,
    You are missing 1 Config
    Quality Management
    Quality Inspection > Inspection Lot Processing > Inspection Lot Creation > Inspection at Shipping (Tcode OQL8)
    mantain inspection origen agenist Delivery type u are using.
    also you need to create Sales Info record(QV51)
    I hope all other settings are OK then it should work
    Edited by: Jayashankardm on Jan 6, 2010 9:59 PM

  • QA16 not showing 03 inspection lot

    Hi All ,
    I am trying to make collective UD for 03 inspection type lots with QA16 . These lots contain long term MICs also . But when I am executing the tcode I am not able to see the lots in list for a particular material  .
    1. In QA16 , checkbox for "include long term mic" selected .
    2. In RR , all results have been made and are with status 5 .
    3. These inspection lots are related to inspection points .
    Also when I execute QA40 , then these lots gets saved with the UD . Can anybody help why in QA16 , I am not able to see lots for this material .
    Regards

    Hi
    Yes all results are passed . For one material its not showing the lots . Also for other materials lots with REL CALC status are also displayed in QA16 .

  • RMCVNEUF....billing document not updating

    The business recently made a change to the Item Categories that update LIS/SIS. They want us to load all historical documents with this Item Category to our SIS structures and DW. There was a change made to RMCVNEUF to allow for us to search all billing documents where Item Category = NLC, allowing us to use the statistical updating program to load only the historical documents wanted.
    As a test, I found on NLC document and run it thru RMCVNEUF. I have checked the Redetermine Update Group check box. I get a message back saying: Data from billing document 9000878658 was not updated
    Message no. M2210
    Diagnosis
    Data from documents used as a basis is required for the processing of billing documents.
    System Response
    The data in the billing document 9000878658 will not be updated
    System Response
    Ensure that all sales orders and delivery notes are processed before the billing documents.
    NLC item category is now configured in SPRO to be statistically relevant. Why would this not update using RMCVNEUF? Config was changed on 4/16/10 to allow for NLC to update. It seems any document created with this item category prior to that date will not be updated using RMCVNEUF? Any ideas? Not sure of a better/easier way to get only the documents we want to load to SIS and then DW.
    Thank you
    Theresa

    Note 142349 says
    Summary
    Symptom
    If in the statistical setup of the sales information system you select option 'Redetermine update group', the following error messages may occur:M2206, M2207, M2208, M2209, M2210, M2211.
    The documents specified in the messages may be displayed correctly during an update simulation.
    Additional key words
    OLI8, OLI9, RMCVNEUL, RMCVNEUF
    Cause and prerequisites
    During the redetermination of the update group in the reorganization, information from preceding documents is written to the intermediate tables MCVSRFK (document header) and MCVSRFP (document item), which are relevant for the determination of the update group of the subsequent documents.
    Solution
    To fill these intermediate tables, the reorganization of sales orders must be performed before the reorganization of deliveries or the reorganization of sales orders and deliveries must be performed before the reorganization of billing documents (in each case with option 'Redetermine update group'.
    Note
    After the successful reorganization the above-mentioned help tables should be deleted with report RMCVNEDE to avoid uneccessary data collection and the increasing loss in performance during the following reorganization runs.
    thanks
    G. Lakshmipathi

  • Material Document not getting posted.

    Hi Guys:
    Material document is not getting created when i try post the inventory difference using transaction LI21 ( Clearing of differences in Inventory Management ).
    we are using WM , so physical inventory is carried out at Bin Level.
    Did I miss anything in the config setting?
    Thanks
    Sweth.

    Hi Jurgen:
    do you have a pick or putaway quantity in this quant in storage type 999 ?
    Yes , in the available quantity I could see the -ve quant ( Goods Issue/Pick)  and + Quant (Goods Receipt/Putaway)
    is the quant locked?
    Quant is showing with unlocked logo.
    is somebody else in change mode in that quant?
    Nope
    is this the only item in your inventory document?
    yes
    have you tried to execute LI21 in background?
    I don't how to do that ,
    do you require to enter a reason for the difference?
    I didn't see that question Popped Up.
    Thanks for the help.
    Sweth

  • Document  not updated in consolidation(urgent issue)

    Hi all
    actually we are posted one  document in 2006 at the time its generated accounting document.but its not generated in consolidation document.now any option to generate the    only consolidation document.
    Thanks&Regards
    Satish
    09892421477

    Hi Hari,
    Thanks for your reply. I have checked in this transaction code also. The system is showing the message as "The document is already posted".
    But it is not updated any tables except the document number is updated in table  J_1IPART2.
    Is there any other reasons for not updating the tables.
    Regards
    RS

  • RMCVNEUF - document not updated

    The business recently made a change to the Item Categories that update LIS/SIS. They want us to load all historical documents with this Item Category to our SIS structures and DW. There was a change made to RMCVNEUF to allow for us to search all billing documents where Item Category = NLC, allowing us to use the statistical updating program to load only the historical documents wanted.
    As a test, I found on NLC document and run it thru RMCVNEUF. I have checked the Redetermine Update Group check box. I get a message back saying: Data from billing document 9000878658 was not updated
    Message no. M2210
    Diagnosis
    Data from documents used as a basis is required for the processing of billing documents.
    System Response
    The data in the billing document 9000878658 will not be updated
    System Response
    Ensure that all sales orders and delivery notes are processed before the billing documents.
    NLC item category is now configured in SPRO to be statistically relevant. Why would this not update using RMCVNEUF? Config was changed on 4/16/10 to allow for NLC to update. It seems any document created with this item category prior to that date will not be updated using RMCVNEUF? Any ideas? Not sure of a better/easier way to get only the documents we want to load to SIS and then DW.
    Thank you
    Theresa

    Hi Cathy,
    It is genrated profit center document also but its not updated in Consolidation (Profit center dimension). If u have idea about this please help me.
    Thanks
    K.Satish

  • Material document not created for scrap

    Hi all,
               I am doing confirmation and goods  movement through Co11. When i enter more yield than planned and some scrap the goods movement are posted ,but there is no material document accounting for the scrap. Also after the final confirmation the order status is still PCNF. Please give your suggestions.
    Looks like I am missing some configuration,do let me know.
    Thank you all.

    1. The scarp qty that you enter here will not generate the material document.
    Reason:
    The scrap enter here proportiantely increases the consumption of the components but will not produce any FG or Byproduct for the materail.
    2. When should we use this .
    For scenarios like : If you are wokring in chemical industry when youproduct 10 litres of paint .25 litres of the material gets scrapped as residue and you just mix it to your sewage line : Here the FG paint whichere gets scraped is not accountedd as separate mateiral but we need to consume the component
    in such scenarios only the scrap should be entered in the co11
    3. Also if you need to catch the activity cost then this will be used
    thanks and regards
    i am also intresed to get different answer

  • Accounting Document not updated in BKPF for JV by J1IH

    Hi
    The user posted JV through transaction code J1IH.
    The document number is updated in table J_1IPART2 but when the user is trying to see the same document in FB03 we are getting the error message as "the document is not exist or not archived".
    And we have checked in tables BKPF and BSEG we did not find this document.
    Can anyone please suggest how to find the reason why the system is not updated this document?
    Regards
    RS

    Hi Hari,
    Thanks for your reply. I have checked in this transaction code also. The system is showing the message as "The document is already posted".
    But it is not updated any tables except the document number is updated in table  J_1IPART2.
    Is there any other reasons for not updating the tables.
    Regards
    RS

  • MATERIAL DOCUMENT not display in fb03

    Hi
    when I entering the material document no xxxxxxxx in Tran code fb03.The s/m doesnt show the material document.it gives error document no xxxxxxxx not exist in fiscal year 2009 or has been archived

    hi,
    You need to know the acocunting document number which is different from Material doc number...
    In FB03, you shd enter accounting doc number not material doc no.
    please confirm the accounting doc no. invoice which you have posted ie. from MIR4...here check the FI doc. number as well..
    and then put that num. at FB03....
    Regards
    Priyanka.P

Maybe you are looking for