Material document number's range issue

Dear Friends,
We are facing Material document number's range issue i.e. For year 2010, 5000202085 number does not exist but higher number 5000202691, 5000203284 exists in system.
why the number 5000202085 is missing?
I checked in the system for relevant setting at tcode OMBT with year 9999 are okay.
Can you pls help me in getting it resolved?
Rgrds,
Pradeep Jain

I had the same question so I searched, that should always be the first step before posting a question.
No points to me please as this answer is not from me!
Search results show:
Answer from: Mauro Bianchi (SAP moderator)
This issue with the internal number assignment occurs due to bufferingin the application server. Buffering increases the performance of theserver and documents don't loose their properties. Nevertheless, it may cause gaps in the internal number assignment and sometimes the numbers may not be chronologically assigned. As I stated before, this won't cause inconsistencies in the system and is usually not an inconvenient, unless you require sequential number assignment in your documents due
to legal reasons. In this case, you'll have to disable buffering in the application server.
in order to disable buffering Just access transaction SNRO and enter the Object type MATBELEGhttp:// Number Range for Material and Phys. Inventory Document In change mode, in the menu bar, please, follow the path:
Edit -> Set-up buffering -> No buffering
Check note 62077 which describes this issue in detail

Similar Messages

Billing Document and Material Document number and Date (Goods Issue)

Dear Experts,
Is there a way I can find the relationship between a billing document and a material document number and Goods issue date?
Thanks

Hi Abid
Is there a way I can find the relationship between a billing document and a material document number and Goods issue date?
You have to follow the flow from the billing document to the material document. This will only work if the billing document comes from a delivery note.
Billing document => Delivery
LIPS-VBELN = VBRP-VGBEL
and LIPS-POSNR-VBRP-VGPOS
So you have LIPS + LIKP with the LIKP-WADAT_IST as the goods issue date.
Delivery => Material Document Number
You can use the table VBFA with the delivery item as the preceding document number (VBFA-VBELV) and item (VBFA-POSNV) ; you will also have to define the preceding document type as J (delivery) and the document category of subsequent document as R (material document).
Because in SAP nothing is simple, there might more than one material document, because the goods issue (601) movement might have been canceled and issue again. So you will have to decide what to do in that case.
Best Regards,
Franck

Material Document Number Ranges

Hello Friends,
We have a business requirement to differentiate the material document number ranges. In our process, we have intercompany and third party scenarios and the requirement is that system has to determine different number series for third party goods issue and intercompany goods issue. Currently as per standard, system deriving the unique number series for intercompany and third party goods issue since th event type is WL.
Kindly provide your inputs on how we can differentiate the number ranges.
Thanks in advance
Best Regards,
Goutham

Hi,
You could try to make it through the transaction code following the process as below:
First u need to create seperate document type in OMR4 or OBF4, then create a new number range in OMBT assign your new number range to new created document type then in T. code OMBA assign new created document type to the transaction code so whenever u will create document with this Transaction code u can get new number range.
I hope this helps!
Best Regards,
Arminda Jack

Material Document Number range for 2011

Hi,
As per standard practice we need to reset the number range for material document for calendar year 2011. New Number range will be effective from 01.01.2011. Please let me know the below -
1.     Step by step process for Number range assignment for Material document (GR / GR / Transfer posting) for 2011
2.     Can we define Material document number rage financial year wise (Apr to Mar) like other FI documents number range? This issue is raised by finance dept. IF yes what will be the process?
At present Number range assignment for our company is showing Year as 9999, from number 5000000000 and to number 5000000000
Whether it is mendatory to re-ser number range.
Thanks,
Ranjan Kumar
Edited by: Ranjan.pearl on Dec 29, 2010 2:51 PM

Number ranges for Material document are maintained in OMBT.
But there is no need to maintain different number ranges for material document as same as financail document. Financial documents are year based whereas material documents are not.
Also if you are maintaining the material document number ranges as per year specific, then also same document number cant be used. But in case of financial document, the document number can be same i.e year specific.
Different number ranges for Material Document :-
Then assign the specific interval for a specific year like
Year      From Number           To Number
2001      0100000000     0199999999
2002      4900000000     4999999999
2003      5000000000     5999999999
2004      0200000000     0299999999
Still any queries, revert back.

Issue using material document number as dynamic bin for purchase orders

Hi...
We are currently using the material document number as a dynamic bin at receiving because we expect to have multiple receipts of the same purchase order. The current setup has everything going into quality inspection, and an inspection lot creates for each goods receipt.
When QM rejects parts to return to vendor, a 122 movement is automatically generated. When this 122 movement generates, the WM stock overview shows a negative balance using the material document number of the 122 movement as the dynamic bin. The positive balance still shows as the material document from the 101 movement.
Is there any configuration that can be set up to fix this issue or will SAP always take the most recent material document as the dynamic bin?
Thanks for the help!

I've tried the following configuration with movement type configuration:
Quality stock in 902 storage type with material document as dynamic bin (requirement type configuration updated). When a return to vendor is completed, there is a positive balance in 902 with the GR material doc number as the bin and a negative balance with the 122 material doc # as the bin.
I also tried configuring this with using GR-DOCK as a bin, and had the issue with the quant record being updated by the most recent inspection lot #.
I also tried using the PO as dynamic bin, and have the same error as above with the quant.
Error:
Error during creation of transfer orders for material document 0026001535
Date: 05/16/2008
Time: 10:52:23
Post.chge not. HR1 2000000011
No quants exist for posting changes
So as according to the OSS note I should use material doc # as dynamic bin to avoid this...but when I set this up I get the issue with positive and negative balances in my stock overview because SAP uses the most recent material document number for each posting.

Material document number range to matchthe accounting doucment number range

Hi all,
SRM 5.0 ECS.
We have a reqt to match the material document number range and the accounting doucment number range for goods receipts in ECC ...Is this possible???If so,how??
Thanks.

It may not workout .
Material document number range configuration should be unique other wise lot of confusion.
since material docuemnt and account documents uniquely identified by Year and Number.
some times one material number and two accounting documents can be created while doing good receipt.

Different material document number range for Services

Hi,
I want to make different material document number range for services.
I have created ZE document type from WE .
But if I see group in OMBT , i am not able to assign ZE there. How to do this?
Regards
Kedar

Hello,
No ! I am not able to see ZE there.
Kedar

Not able to see backend material document number in SUS

Hi,
A GR is created in ECC. It is avaiable for disply in the supplier's login. We are able to achieve this.
The question is "We are not able to see backend (ECC) material document number anywhere on the screen. We are only able to see the SUS Confirmation number (i.e. as per the number range assigned to BUS2233). Is it standard behavior?
Details: SRM7.0 SP07, ECC Ehp4, Using MM-SUS. Plan driven procurement.
Ganapathi

Dear Manjunath,
Thanks for the response.
We have noticed that, the back end (ECC) material documents are getting replicated to SUS as we are able to see this number in BBP_PD & BBP_PDBEH-BE_OBJECT_ID.
So, let me put the question this way.
Our issue is with display of document in the portal (BSP Pages).
For Example, in case of Invoice, the supplier can see the back end MIRO invoice document number with the "External Reference" Label, under Basic Data section. The case is NOT same with GR. The back end (ECC) material document number is NOT seen any of the layout (for end user, who has logged in as supplier).
Is it standard behavior? If we want that, the suppliers should be able to see the material document number in the portal, when a GR is created in ECC, what settings we have to do?
Ganapathi

Need material document number

Dear all,
I have an issue. Inorder resolve it i need run a run aset up in OL1BW using the material document number.
I have the process order, period, plant and material, but i need to find the corresponding material document number. Can anyone help me how to proceed further?
The datasource is 2lis_03_BF.
Pls also diferntiate between material and materail document number.
Thanks..
Regards
Santhosh Kumar N

The source for 2LIS_03_BF, as Arun pointed out, are R3/ECC tables MSEG and MKPF.
Material - Refers to the material number, or part number, that is being managed. Typically, the material on an R3/ECC system is an 18-byte generated number to identify it to the system and has an industry accepted part number (Manufacturer Part Number) as a conversion exit so that you can enter either on R3/ECC and get the correct material number.
Material Document - Refers to the internal document used for tracking the movement of a material. Examples of material movements would be goods receipts and goods issues. MKPF is the Material Document header table and MSEG has the Material Document line items.
To find the Material Documents, you're going to have to query the MKPF table in your R3/ECC environment to get the document ranges needed for the setup jobs that you plan on executing.

Material document number to match the FI document number

Hello MM Gurus,
May I know if anyone here has encountered a requirement where the material document NUMBER generated from goods movement (GR, GI) should have the same NUMBER with the FI accounting document generated with it? I tried to match the number ranges initially but this would only apply to 1 company code.
Are there user exits here that I can use?
Regards,
Marvin

Hi
You can create Number ranges for each year in OMBT transaction.
regards
Srinivas

Same material document number durin PGI

Dear all
When doing PGI against Oubound delivery for a current STO i am getting a Material document number which is already generated by the system against another STO. How and why it is happening?
What should I do to avoid such situations in future? Pls guide.
Regards
SAM

Hi,
Let me know which document is displaying in MB03 while trying to see the postings?
also check weather any number ranges are transported to this client in th middle. If they are transported then existing numbers will be overlapped and this type of problems will come.
Regards,
Bharat.
Edited by: B K on Feb 28, 2009 11:07 AM

Insering Material document number which is created while posting MBGMCR02

Hello Friends ,
i have a requiremnt to insert the material document(mblnr) which is created while by posting the MBGMCR02 inbound idoc for
post goods issue .the requirement is to insert the MBLNR at weo5/we02 at status records.
message type MBGMCR .
For example the system will show the status message as 53 if idoc is created successfully and below that the 'message : BAPI EXECUTED SUCCESSFULLY its showing , instead of this message i wanted to show the new MBLNR number there .'
please help me by giving good suggestions.
thanks Advance
Anant

Is there any standard Function Module to find out FI Document number using Material Document number?
let me know is there any Function module available to identify these Material Document number or FI Document number?
Is there any standard Function Module to find out all the details ( such as Invoice date, vendor, amout, tax amount , payment due date, payment terms , approver) using invoice document number.

Configure MB51 to be able to filter by material document number

Hi,
Is it recommended to enhance MB51 by reconfiguring the fields contained in the field catalog (RM07DOCS)? For example, current MB51 is not able to filter by material document number. Will there be any issue if we will configure it to allow to filter by material document number?

Dear,
In MB51, it is possible to filter the material document number. Kindly go through this sequence,
MB51 ---> Execute your data (F8) --> Click on Details list (Blue square button) ---> Select material document column --> right click and select filter.
Regards,
Sandip

How to get the Next Material Document Number

Hi,
Please let me know How to get the next Material Document Number using Functional Module,
Material Document number are in MSEG table.
Regards,
Ganesh

Hi Ganesh,
if you want the next matrial number then first of all you have to define it as a number range in transaction snro.After creating the number range you have to define the interval.
now you can use your number range by calling the function module
CALL FUNCTION 'NUMBER_GET_NEXT'
      EXPORTING
        nr_range_nr             = '01' " here you have to give the number range number which you have defined in number range
        object                  = 'ZPRODLOG' " Number Range
      IMPORTING
        number                  = wa_prod_error_log-seqnr " sequence number generated,in your case material number field
      EXCEPTIONS
        interval_not_found      = 1
        number_range_not_intern = 2
        object_not_found        = 3
        quantity_is_0           = 4
        quantity_is_not_1       = 5
        interval_overflow       = 6
        buffer_overflow         = 7
        OTHERS                  = 8.
each and every time next number will get generated .
i hope this will help you.
Thanks,
Tanmaya

Serial Number for material document number

Hi All,
Can any body tel me where Serial number stores for particular Material Document number.
When user creation/posting MB11 he will enter serial numbers for material in material document.
I already searched the forum. Unluckily i didn't received any related information.
Thanks in Advance.
NK

I Tried looking standard table which contain Material number, Serial number, Equipment and Material Document but there isn't any.
So I went into SQVI and join two tables, MSEG and OBJK. There I manually draged the MATNR from MSEG Table to OBJK and then selected the fields like Materials Number, Plant, Material Document, Mov Type etc and from other table I selected Material Number plus Serial Number, Equipment (chose your required filters) and then executed and it shows the required records correctly.
Only issue it had was that if you try thousands of records e.g. Materials it went though and brought resukts and some time it dumped. But it fulfilled my needs successfully.

Material document number's range issue

Similar Messages

Maybe you are looking for