Material Documents did not capture cost centre

Hi,
There are some PGI / Material documents did not capture cost center.These vehicles are missing cost center in the PGI/Material document and i am unable to figure out why is it happening.
Can u please help me understand why the cost centre is missing ?
Would you clarify that issue.
Thanks and best regards,
pragya

if your material GL account (P&L) account are created as cost elements, you cannot post any document with out cost object. If you GR is through production order, need not assign any cost center, as production order itself is cost object. For other cost elements you can assign cost center in OKB9.
regs,
ramesh b

Similar Messages

GI document has not captured costing

Hi All,
I am currently involved in small project implementation and this is related to variant configuration through intercompany process.I have a SO (equipment) MTO scenario and a PO is created with ref to SO (for which costing is done).
For PO, O/B delivery is created and Gi is done, When checked the Gi document there seems to be no cost calculated.(Zero)
could any one of you tell me why zero is there isn cost and did I missed any thing?

Hi
if you see the condition type configuration of VPRS in t code V/06
if the condition exist in SO then automaticall y cost will be updated at the time of delivery and in turn in the billing it will show and update in the copa also.
Regards
Damu

Material doc did not reverse evenif operation cancelled in production order

Hi
I confirmed production order operation with auto GR control key. Operation sts changed to CNF and 101 movement took place. Material is in stock. But now when I cancelled the operations, operation status changd to REL but materail document did not get reverse and stock is still there. I checked COGI, but no entry there too. So what is the problem ? Pls advice

Hi,
Did you look for entries in transactions CO1P and COFC as well?
Regards,
Marcelo

My document did not convert correctly. Can I fix it in the PDF version?

My document did not save as it was originally written. Can I fix it once it has been changed to a PDF?

Hi iamreadytoscream,
Did you use PDF Pack to convert a file to PDF? What was the original file format? And, can you provide a little detail about what didn't convert correctly?
I think the best approach is to figure out why the file didn't convert correctly. You would need Acrobat to edit the PDF once it's created. And, as Acrobat isn't a word processor, it really isn't meant for major editing or formatting.
Please tell me a bit more about the file that you converted and we'll go from there.
Best,
Sara

GR slip for PO created in Material document but not printed or in spool

Hello Inventory Management Gurus,
I have a problem printing GR slip onto the printer.
I am able to create the output and can see in the material document but not in the spool or printer.
I configured GR slip printing in OMJ4, created condition record in MN21 configured in NACE etc., for the output type.
What is preventing from printing or appearing in the spool if it created the output in material document?
I have the setting "print immediately" enabled and "release after output" unchecked in OMJ4.
What is missing?
Please help.
George

Hi
Output for GR is Printed through T-code 'MB90".
Note - in GRN Individual /Collective Slip and Print indicator should be selected.
Enter the GRN No,Select the Output type and Execute.
Regards
Viru

Material documents can not be printed

hi!!
I see that material documents can not be printed material in a storage, we need to
print at least the original and copies I mean to be printed two copies when you post the transaction MIGO_TR.
When performing the movement I leave the check box activated from the
printer and automatically deactivates when you post and the tx MB90 that is to reprint the documents tell me that there is no printing message
I look forward to your support

Please check these answered links:
Print out -- MB90
Re: MB90 GRN Print
Re-print material document - MB90
GR Note Print out not comming through MB90

Billing document does not capturing basic amt. capture only duty part

Hi
while doing billing on customer
the billing document does not capturing the basic amt on , it only capture only duty part.
pl suggest , how resolve the prob.
Regard
R.Sharma

HI,
Check the pricing procedure, in that remove the statistic for the pricing condition then try,
i think will resolve the issue, pricing should not activate the statistic
Thanks & Regards
Rajasekhar

When I run the Reconciliation ledger KALC in the doc not update cost centre

Hi
I have done assessment and distribution in month ending. This distribution did in 2 company codes cost centers. it was successfully posted & updated in 2nd company code cost center.
Then I ran the Reconciliation ledger in KALC month end. I was also successfully document posted in G/L account.
But Cost centre was not updated or not picking in the document.
Please give me suggestion .
Thanks
Indu

Dear Indu,
KALC will not update specific CO objects. The intention of the reconcilliation ledger is to reconcile CO internal postings with Financial Accounting. The necessity for reconciliation arises from the fact that, depending on controlling area / company code relationship and customizing, any CO posting can either be:
u2022     Cross company code
u2022     Cross business area
u2022     Cross functional area
or a combination of the above mentioned. For these CO internal postings there will be no corresponding FI documents with the result that CO and FI do not reconcile on company code/business area or functional area level. The reconciliation ledger adjusts this by creating the relevant FI documents. I hope this clarifies the issue.
Regards
Karl

Excise duty for some line item of material document is not posted

Dear CIN Exerts,
In my Scenario user is Posting Excise invoice for every GR (105) by J1IEX to generate Excise invoice.
In some Past cases, if there are more then one line item in a GR then Excise value for some material is not showing (May be that time user not Did J1ID (Excise rate maintenance ).
Now the problem is that we wants to post excise Duty for those material WRT material document for whom it was not posted.
Please let me know that how can we do so (excise posting against Material document) so that it get reflected (for those line items for which Excise deuty is not posted) in MIGO > Document Display> Excise items tab .
Regards,
Ashutosh

Excise posting is not recommended by sap for movements 103 or 105.
Refer or search for SAP notes with subject CIN Limited functionalities.

Material Document is not generated in PGI

Hi,
Iam doing PGI i am not getting Material document number and i went to MB51 there also i am not any document number is there any customizing settings for the material document
thanks
seshu

Hi,
Check the material, it might be service material, go to material master in MM02 and check the Item category group and check weather it to be LEIS "Service with delviery" if it is then PGI will be done but not material doc will be generated
Second:- Check weather material is maintained as Non-Valuated, and check weather Accounting1 view is maintained or not
if not maintained then maitain standard price and valuation control there
Regards
Shambhu Sarkar

Billing documents did not post to PCA Ledger

The system did not crate did not create Profit Center Documents and CO Documens for 5 billing documents when released to Accounting.
But when the customer made payments, the payment document created a profit center document. The AR is not reconciling to GL.
The KNC1 table is not showing the Invoices but showing tha payments. So the customer cumulative balance is out of sync. This is causing our custom reports for AR Aging not reconciling to GL.
I have posted using 1KE9 the billing documents to PCA, this has not fixed the issue.
This report S_ALR_87012172 for customer balances in local currency is showing incorrect customer balance.
How can I fix the GL / AR?

Hello Geeta Gupta,
There is a SAP internal interface between SD and GL. You can check it by tcode VFX3.
If a billing is proceeded in SD succesfully it can be sent out to the customer to fix the recievable with the external customer. SAP internal account determination or other customizing mac not be complete to transfer the billing document to GL completely and successfully. So it gets stuck and can be identified using VFX3.
As it goes through to GL it is in AR in the same moment (In 20 years FI I have never seen a difference between AR od AP and GL). Only documents posted in FI-GL or CO can be transferred to PCA. There is NO link between billing documents and PCA (remember it is CO-PA which has billing as a direct source). So a billing which is not in GL cannot be in PCA.
So start VFX3, identify and comlete the missing settings and then kick off the billing to be posted.
Regrads JMy

Material PO texts not captured completely(all characters) in report

Hi Experts,
Please let me know How to capture all characters of a Material PO Text as maintained in Material master in a standalone report.
Have used STXh table to poppulate the characters based on material numbers but it seems all characters are not captured in the report it is truncating some characters from the PO text entry.
Thanks,
AKS

HI,
check with your ABAp consultant
How max character you have upload in material master and how max charterer you are reading in your report
that may be reason
Regards
Kailas Ugale

Elements 4.0 did not capture entire 1 hour miniDV tape contents

I used Elements 4.0 for the first time and in capturing the footage on a one hour tape, it stopped after 46 minutes and gave some sort of message (I failed to write it down at 1 AM) to the effect "Exceed Threshold 699KB".
Why would Elements not capture the entire 1 hour?
Thank you.

I still cannot drag the template into Video 1 or 2.
You would only use Video 1, if you had no Asset that you wished to "show through" the "hole" in this Title. If you have Assets on both Video 1 & 2, you would use Video 3, otherwise, use Video 2 above whatever you wish to see through the hole.
Do I need to be in Edit or Create Menus?
Edit Mode.
Let’s try this from the ground up, shall we?
In Timeline View Mode, click on the Edit tab. Then click on Titles and navigate to General (Show All) and navigate to the Canvas Titles. In PrE 4.0, there are two. We will use Canvas_frame.
Look at your Timeline display, and make sure that you have either an empty Video 2 or Video 3 Track, above the Clip that you wish to "show through" the "hole" in Canvas_frame. There is a zoom slider at the top of the Timeline Panel. It is to the right of a little double clock icon (the TimeStretch icon). Slide the black bar in this slider to the right, to expand the horizontal view of the Timeline. You may have to scroll (bottom of the Timeline Panel) the Timeline’s view back and forth a bit, until you have the area, where you wish to place the Title, in full view.
In the Titles Panel (this is really an extension of Organize, but automatically shows the Titles, which are part of the Functional Content, installed along with the program files in PrE), click-drag on Canvas_frame. While holding down the left mouse button, drag it to the spot you desire on Video 2 Track, or Video 3 Track. If you only have Clips/Assets on Video 1 Track, choose Video 2 Track. Let’s assume that this is your case and that Video 2 Track is empty above your Clip in Video 1 Track. The cursor will change to include the little Insert Edit icon, but that is not important, as we are placing this Title onto an empty Video Track. When the Title is over that Video Track, you will get a long white line with two little right-facing arrowheads. Depending on what you have on your Timeline, it might not be easy to see the lower of these. When you have positioned your Title onto Video 2 Track, you can release it and it will stick there. You can move it along the Video 2 Track, as is required. You can also change the Duration of the Title by click-dragging on either the Head, or the Tail, of the Title.
Done.
If this is not working for you, then there is something very wrong with either your installation of PrE, or with your system.
Now, a couple of questions:
1.) I assume that when, in Edit Mode, you click on Titles, you open up the Title Templates, and can find the Canvas_frame. Is this correct?
2.) I assume that you have an empty Video (2, or 3) above the Clip, over which you wish to place this Title. Is that correct?
3.) If one clicks and drags (holding down the left mouse button, for right-handed mouse settings) on something (say a Clip in Organizer) in PrE, it can be dragged to the Timeline. Does this happen for you? Can you click-drag on Clips in Organizer and get them to the Timeline?
Good luck,
Hunt

Material Document cancellation not possible

Dear All,
First of all sorry for the long query, it is required to give a clear perspective of the issue.
I am having an issue in which i am not able to reverse the GR which is made on a P.O that P.O is a third party P.O.
I am getting the message "The value of goods movement is negative"
the scenario is as below:-
There are two systems both are SAP system and they belong to the same group of company.The 1st system places an P.O to the 2nd system,then the 2nd system creates a sales order with reference to the P.O and then the sales order in turn creates a PR automatically(as normally happens in third part scenario). That PR gets converted to P.O and the P.O is placed to another vendor which is different from the entire entity.
they have(the 2nd system) placed the order for the material suppose "X" to the outside vendor.
Statistical GR normally happens in 2nd system which triggers a invoice in the 1st system at the same time through an IDOC.( this is only for information)
in this case once the outside vedor has confirmed of the despatch of goods GR made in 2nd system but physicaly the goods have not arrived at 1st system.
now when the goods actually arives at 2nd system they found that the material is sth else than "X" so they didn't made a GR in 1st system and straight away returned the goods.
Now the status of various documents are as below.
P.O of the 1st system--- 1) Invoice has been done equal to the billing amount in 2nd system
                                    2) Invoice reversal has been done for the same amount as above.
Sales order in 2nd system:-1) Invoice or billing has been done.
                                        2) It has been cleared from finance side.( the sales order is in completed ststus)
P.O in 2nd system:- 1) GR done
                              2) Invoice done against GR
                             3) Subsequent debit amounting equal to invoice amount made.
So could some one please let me know first of all whether a GR reversal is required in this case? As the GR is statistical in the 2nd system and the 2nd system is not actually receiving any goods.
If yes then what is the meaning of the messge given in the begining?
I tried to reverse some other P.Os for the same material which are having GR and IR on a trail basis and i am able to do without any error.
If the material valuation is going negative then it should happen to all?
Thanks for your patience in going through the long query and sending a reply.
Regards,
Sushanta

Have you change the PO price in another goods receipt and after that made a goods receipt reversal? I got this message when we did a goods receipt with a PO price and the good reversal with a different PO price. The system acumulate the variance and one time they do not allow you to do the goods reversal because you get negative.
regards

Posting Document num not captured in BDC message table

I am working on a dataload program for Asset Transfer using tcode ABUMN. If I run ABUMN online, it will give me the message saying, 'Asset Transaction posted with document no. xxxxxx' after saving the trx. However, I can't capture this message while running the Call Trx/BDX program.
I don't know why the message table is empty after a successful Call Transaction. If there is an error, it will capture it, but no meesage if the trx is successul. I thought the table will capture any message whether it is a 'S' or 'E' or 'W'. It works for other tcodes, but not for tcode ABUMN.
DATA: T_MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
" Batch Input Message table
call transaction C_TCODE using t_bdcdata
MODE P_MODE
UPDATE P_UPDATE
MESSAGES INTO T_MESSTAB
CAll Transcation is a standard code, so there is need to specify what types of message should be captured.
I remember seeing some threads about the empty message table, and they suggest to use Parameter Id to capture the posting document #. I tried par id ' BLN' and still not able to see anything there.!!
Can anyone help?
Thank you in advance for any help. Greatly appreciated.

Hi,
I have come across with the same issue with transaction CS01. I have done it in a round away . I find an userexit after save , and export the document number to memory and after the call transaction import the document number from memory and updated the BDCMSGCOLL table.
May this info will be helpful to you.
a®

Material Documents did not capture cost centre

Similar Messages

Maybe you are looking for