Material Extend Problem within same company code

hello all,
In my company there is one company code '1000' and TWO plant 'ABC' & 'XYZ'. problem is that when i extend the material in XYZ plant from ABC then when i change somthing in material view in any plant then it is getting reflected in other plant also. it is same hapening during BOM extend. can anyone please tell me why it is hapening? is there any solution for the same?
Regards saurabh.

Hi
Can you explain little more ? like what field you have changed?
If you change the fieldd which are specific to the client level then it will reflect in both the plant.
THanks/karthik

Similar Messages

  • Stock Transfer Between two plants within same company code

    Hello,
    We are using scenario-'Stock transfer between two plants within same company code. Scenaro is like Plant A is receving plant and Plant B is delivering Plant.
    Plant A release PO for 100 nos to Plant B
    Plant B issues 100 nos (via delivery) to Plant A
    But Plant A receives only 50 nos physically so they do Goods receipt for 50 nos , but document got generated for 100 nos (when plant B issues material).
    Now Plant A do not want to receive remaining 50 nos physically, but wants to reduce material document which got created when goods issue posted by plant B
    Now stock in transis (mb5t) is 50 nos.
    How to reduce this material document. or any another alternative solution for this?
    Thanks,
    Shailesh

    Hi There
    Reversal of partial is not possible ,
    But you can use the Mov Type 557 and 558 to do the adjustments in Stock in transit qty
    Few more details on STO adjustments
    Hi There
    it can be settle in many ways,,,
    1. Receive the goods as 100 and Scrap the 50 nos from the received plant,,- If the receiving plant is responsible
    2.Revert the PGI/Transfer movement(Vl09) and send the 50 nos again from the supplying plant- of the Supplying plant is responsible,
    3.Also we have the movement type 557 and 558 without doing the above two steps you can correct the qty from stock in transit itself,,
    4. also you can check the below similar thread
    STO - material lost during tranfer from plant A to plant B
    5. If above are not ok, then receive the goods as 100, And raise the STO as your plant as supplying plant and receiving plant is (Supplied 50 nos less) plant,, Do the process without sending the material.. in this way that 50 nos can be adjusted,,
    6.Here is some more details
    557 Issue from stock in transit (adjustment posting)
    Only use this movement type (also the reversal movement type) under the following circumstances:
    Using movement type 557, you can correct purchase-order-independent stock in transit if
    - a good receipt cannot be posted to a purchase order without stock in transit, even though there is still stock in transit according to the purchase order history
    - stock in transit still exists, even though there are no open stock transfer orders for the particular material
    This movement type may ONLY be used in the cases mentioned above after careful analysis, to correct stock in transit that has rounding errors.
    This movement type may not be copied.
    Note!
    Before using this movement type, note the following:
    - 392205 Analysis stock in transit / Correction if split valuation
    Possible special stock indicators:
    E, Q
    7. As previous post says if you have the note for this issue you can use that also
    You can use any one of the way to solve the issue, Hope it helps
    Cheers
    Senthil P

  • STO-Within same company code and same sales organisation

    hi freinds
    i need steps for STO Within same company code and same sales organisation "xyz" with different plant "X " and  " Y"
    with regards
    dinesh

    Hi,
    Sales organization is linked to sending plant. It does not matter if receiving plant is using the same or different sales organization. The setup from sending plant is independent from that.
    As for the STO standard setup, I suggest you search SDN first. Below example link.
    STO setup article link:
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c05e2251-91f0-2c10-4e91-e919468e4687
    Regards,
    Dominik Modrzejewski

  • Consignment Process( site to site transfer within same company code)

    Hi All,
    We  are having 98% items are the vendor consigned article. We are working in IS retail environment ECC5.0. Our scenario is as follows:-
    We inward all the vendor consigened articles in Distribution center  and stock it in DC. From DC we want to transfer vendor consigned articles to Retail stores where we are going to sale  vendor consigned article.After the sale we get the payments from the vendor.
    My problem arise here :-
    1. How do I transfer vendor consigned good to retail  stores as vendor consigned goods  so that I can see the inventory of vendor consigned articles in retails stores and  monitor the stock.
    2. I am looking forward for temporory solution that I should use MB1B , Mvt Type 301 K ( consigenment). But problem is that It create internal documents (MM documents)  but I need transit document which will show the value of items,.
    Since it is consigned artcles  it will not generate accounting documents.From Should I get the price.?
    3.I tried as Stock transfer  (STO ) process but  for regular ( owned ) item it is working fine but for consigned materials it say" You can not have   STO process for Consigned articles with in same company code".Please suggest How should go? so thatI will have consigned stock
    Looking forward for  your valuable  and earliest response
    Sanjay Rahangdale
    M09327162228

    hai
        you can use 301 - K  in MB1B .it will not generate accounting document since the material belongs to vendor.but you have to maintain consignment info record in both plants .the price should be same in both plants.
    it will solve your problem
    reward if useful

  • STO processing within Same Company Code with Billing/Invoice

    Hello Guru's,  I have been asked by our finance department to look at having billing/prices associated with our STO (UB) movements of stock within the same company code.  We currently use a UB order type but obviously no billing is associated with the delivery type NL.  We do have inter company STO's (order type NB) and have prices and billing associated with the delivery type NLCC.
    I wanted to take a copy of the NB order type (copy to ZB) and attached to relevant elements in the IMG (assign doc type & define delivery types).  I have done this in an open DEV client and have got a new PO created (ZB) and created a delivery, picked and confirmed the picking.  I have got to a point of PGI and i get the following message ' Purchase order 45########## does not contain items for a stock transfer'
    Firstly, do any of you trade via STO within the same company code and associate a billing document?  The reason we want to is that our manufacturing plants want to charge a premium to the packing and distribution warehouse for the goods to get profit visibility.  At the moment the standard cost of goods manufactured at our manufacturing plants transfers to our distribution plant at the same value. 
    If any of you have any ideas then please let me know.

    Hi,
    Pricing configuration for STO: -
    In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. Stock Transfer Document to Schema Grp Pur. Org, STO Type (For e.g. UB) and Supplying Plant.
    Calculation Schema "RM2000" has condition type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N ("Conditions" Tab).
    You can create new freight / delivery cost conditions in M/06 for Margin and assign in pricing procedure "RM2000" in M/08 and also assign the Accrual Key to this and do the Account Determination for this Accrual Key in OBYC
    At the time of PGI, following accounting entry will get generated;
    Stock A/c - Dr - 110 INR (Receiving Plant)
    Stock A/c - Cr - 100 INR (Supplying Plant)
    Margin Account - Cr - 10 INR (Supplying Plant)

  • Can we give same Excise Group to two diff.  Plant within same company code

    Hi,
    Can anyone please tell that whether we can assign same Excise Group to two different plants within the same company code in SAP.
    Regards,

    Yes you can use but, you shouldn't use same excise group for two different plants in one company code, if their physical location is different.
    As many excise report are fetched on the basis of excise group, there it will show combined values for both plants, whcih may not be acceptable to exices authorities.
    Regards,
    Sachendra Singh

  • Stock transfer between two plants within same company code at price

    Hello,
    Hello
    I have a scenarios. One plant is selling a part to other plant at a margin. Both plants belongs to the same legal entity.
    How can I map this scenario in SAP?
    What will be the cost of my part in these two plants?
    What mechanism I would use to transfer the stock from supplying plant to the buying plant?
    Your urgent reply is appreciated.
    Thanks,

    Hi Pream
    You can do it through Intra Company STO, but in this scnerio the libility never gets generated to the receiving plant because it is transfer from one pocket to other. but you can always transfer the goods on the assessable valu. you have to maintain the ***. value in J1ID, then while bill system picks the same ***. value in UTXJ condition.
    But if you want to salel at a margin then use SO-PO i.e. create PO from receiving plant and against sale order, do the delivery of the material to the respective plant.
    I think this will help you.
    In case of any qurty feel free to contact
    Girish

  • Can Equipment No same for 2 Equip in different Plants of same company code?

    Hi Gurus,
                Please tell me if there is any possibility of having same Equipment No for 2 Equipments in Different Plants.
                The 2 plants are in the Same Company code.
                e.g.  Equip           Plant                Company Code
                   1)  Equip_DIE    Plant1              A
                   2)  Equip_DIE    Plant2              A
               If it is possible how the Equipment histroy and Breakdown history is updated in the PMIS.         
               Also tell me the advantages and Disadvantages of keeping same Equipment no for 2 diiferernt Equipments or otherwise keeping different equipment no.
    With best regards,
    Narendra Dere

    Hi Pete ,
              Thanks for your valuable reply.
              Actually I am doing implementation for 5 plants within same Company Code.
              They are geographically distant (say 50km from each Other.)
              The Finish Product is same but the method is different.
              They have already assigned some Equipment Numbers in the Plant for Regular Maintenance Activities.
              Since Planning and Maintenance can be done at the different Plant and team of the MAintenance is different, they dont hv anyproblem if equipment number is same. Otherway they wll have the added advantage that they can continue with there own Equipment no which can be same in differnt Plant.
           e.g 800TONPRESS - Plant1
                800TONPRESS - Plant 2.
       With best regards,
       Narendra Dere

  • MM STO between Plants under the same company code

    Hi experts,
    Please guide on the configuration steps for doing STO between Plants unders the same company code.
    We have company code 100 in that Plants A B & C are theie. Each Plant can do STO to other Plant.
    How to configure this scenario?

    Dear,
    Please follow bellow path
    1. Create a vendor for the Company code of the receiving plant using account group 0007 via T-Code XK01.
    2. In the purchasing data view assign the supplying plant and the schema group
    3. Create customer with the sales area of the vendor.
    4. The shipping conditions, the delivering plant and the transportation zone determine the route in the STO.
    5. In the pricing procedure determination relevant to the STO assign document pricing procedure and customer pricing procedure to get the pricing in the invoice.
    6. Maintain condition records for pricing condition.
    7. Maintain carrier as a partner in the customer master.
    8. In OMGN select the supplying plant and assign the company code and sales area. Similarly select the receiving plant and assign the company code and sales area (The company code to which the plant is assigned to).
    9. Assign the delivery type and checking rule to the document type.
    10. And finally, assign the purchasing document type to the supplying plant and the receiving plant.
    11. Create the STO using T-Code ME 21N and save.
    12. Check for release strategy if any and release using T-Code ME 28.
    13. Create delivery in background using VL10G.
    14. If delivery is created, it is an indication of correct configuration and master data creation.
    Stock transfer between two plants in different company codes is known as inter company stock transfer.
    Material should be maintained in both supplying and receiving plant MM01
    Stock should maintain only in supplying plant MB1C
    Create receiving plant as a customer in supplying plants company code and sales area XD01
    Assign this customer number in receiving plant details OMGN
    Assign supplying sales area in supplying plant details OMGN
    Assign delivery type NB for in combination of supplying/ receiving plants.
    Create STO ME21N
    As it is normal there in the item details we should get shipping date i.e. customer number
    Go for Delivery VL10B
    Shipping point *****
    Select PO go for execute
    then select the delivery then go for delvy ............create delvy,,,, delvy number generated.
    Goods Issue VL02
    Delvy doc **********
    Click on picking
    enter the picking qty
    Click on PGI
    in the mean time check in the PO history you will get the details
    Goods receipt MIGO
    Stock transfers that include deliveries and billing documents/invoices are only possible between plants belonging to different company codes.
    If you want to carry out a cross-company-code stock transport order with delivery but without a billing document, you must set the Relevant for Billing (data element FKREL) indicator in Customizing of the item type to "blank" (Not relevant for billing).
    The following applications are involved in this type of stock transfer:
    ? Purchasing (MM-PUR) in entering the order
    ? Shipping (LE-SHP) in making the delivery from the issuing plant
    ? Billing (SD-BIL) in creating the billing document for the delivery
    ? Inventory Management (MM-IM) at goods receipt in the receiving plant
    Invoice Verification (MM-IV) at invoice receipt in the receiving
    Transfer of goods from one location to another location, it may be between plants within the same company code or in different company code's plants.
    within the company code, but plants,
    receiving plant will raise the STO in Supplying/issuing plant-ME21n,
    Supplying plant will deliver the goods to receiving plants ,
    then we need to pick n post the Goods Issue-VL02n,
    now when we can observe that the STO qty will be added into receiving plant and reduced in Delivering plant,
    To do this, we need do prior customization in SPRO-IMG,-
    material should be created in both plants( receiving & Supplying)
    -maintain the stock only in supplying plant
    -create a dummy customer in supplying plant's sales area(if u have one sales area, create in tat comp code n sales area)
    -assign this customer number to receiving plant's details along with the sales area,
    -Assign the STO doc type(UB) to Supplying plant, along with checking rule
    -Assign the Del type (NL/NLCC) to Supplying n receiving plant.
    Stock Transport Order:
    http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b911d43ad11d189410000e829fbbd/content.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b917843ad11d189410000e829fbbd/content.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b918543ad11d189410000e829fbbd/content.htm
    u can also use the SAP building block
    with delivery
    http://help.sap.com/bestpractices/BBLibrary/html/P36_IntStockTransDel_EN_IN.htm
    without delivery
    http://help.sap.com/bestpractices/BBLibrary/html/P38_IntStockTransWithoutDel_EN_IN.htm
    Regards,
    Mahesh Wagh

  • Transfer with in same Company code with a fixed mark up

    HI  gurus,
    here is the situation ,we purchase some unlabelled packing materials form vendor in the distribution center , then pack them up into many smaller packages with our own label , after that ,the DC transfer packed material to store for sales .
    the requirement is that ,we want to manage both the stock of raw material and goods for sales in different article number ,and when doing the tranfer posting from DC to store ,the cost of package material can be included in the transfer cost of sales goods,additionally with a fixed mark up. BTW , the DC and store belong to same company code .
    any suggestion?
    thanks in advance !
    Edited by: deyi chen on Jul 1, 2010 9:21 AM

    Dear Friend,
    your scenario look like STO within company code
    you can achieve your requirement by
    Mark up or by paking scenario if you use packing scenario you can use that item category is relevent for pricing and you can add packing charges into your main product pricing
    your SAP termilogy shows you are working on  SAP IS Retail

  • Restrict proforma invoice without doing pgi in STO(same company code)

    Hi Gurus',
    I am creating STO (same company code) from Exciseable Plant to Non Exciseable Plant.
    For that i am creating ME21N> VL10B>VL02N(PICKING & PGI)>VF01(Proforma Invoice)>J1IIN>
    Now problem arises ---
    I am able to create Proforma Invoice without doing PGI.
    Now i want to restrict proforma invoice creation with out doing PGI.
    What config require for this.
    Regards
    Santanu

    Check your copy controls fromT. Code: VTFL - Copy-Control Settings b/w Delivery-to-Pro forma  say, F8 -- LF
    Settings at Header for the combination equal copying requirements 003 Header/dlv.-related and at Item category copying requirements 004 Deliv-related item

  • Stock transfer order between 2 plants in same company code

    Dear All,
    We have the requirement, where in the stock tranfer order (between 2 plants in same company code) instead of Material valuation price, MAP/Standard (depends on Price Control) gets picked up from supplying plant ,user should be able to enter its own price while creating stock transfer order.
    For fullfilling this requirement, I have created new condition type(where i have changed condition category from internal price "G" to "H" - Basic Price)
    Instead of using condition type- P101 in the stock transfer pricing,I have used above created new condition type, in pricing procedure then also while doing the post good issue against the outbound delivery( move type-"641", moving average is getting picked up.
    Can you please tell,where is the setting where we can make the system to consider manual given price while creating the stock transfer order instead of picking moving average price.
    Its very Important requirement ,please Provide valuable Inputs else provide some alternative.
    Thanks & Regards
    Nitin Chhabra

    Stock Transfer Order between Plants in the same Company Cpde are not relevant for pricing, as there is no billing. Billing only takes place between company codes. As same company code it would be like selling something to yourself - it doesn't make sense.  The stock value in the receiving Plant depends on the price contol there. If standard price, then you must enter the price when creating the material or use material revaluation to change it. When you transfer the material from the issuing plant, the value there will be transferred. In case of standard price any difference is posted to stock transfer differences. If using MAP then the value will be transferred from the issuing Plant in full.
    If you use costing with standard price in main plant, then it is possible that you can transfer the cost from the main plant to the second plant, by using special procurement key for costing.
    Rgds
    Richard

  • Extend customer to multiple company codes and mutliple sales organisations

    Hi,
    Customers with only general info. are getting created from CRM system to SAP ECC. Now we extend the same customer to differnt company codes and different sales organisations.
    When I checked the BADI, CUSTOMER ADDDATA, in this S_KNA1, S_KNB1, S_KNVV structures are there only. So is it possible to extend it to mutiple company codes at the same time.
    It is mostly appreciated for early response.
    Thanks,

    Hi,
    You can use fm SD_CUSTOMER_MAINTAIN_ALL to extend customer to sales are and company code.
    Using this fm you can maintain all customer master data.

  • STO - Two plants within Different Company Codes

    Hello,
    Kindly help me out with this case, i want to create a STO for two plants within DIFFERENT company codes, so i've created all the required configuration and master data including creating the supplying plant as a vendor and the ordering plant as a customer, also all master data is maintained in both plants and i tried the scenario on the IDES system and it works okay so i know i'm on the right procedures. The problem is that i create the PO, but when i go to Transaction Code VL10B to create the delivery it gives me an error ( Delivery with no Line item not allowed ) even though there is more than enough stock in the storage location. Kindly help me out.

    17.01.2010     Stock                            10.500,000      0,000      10.300,000
    13.01.2010     Order     Totals record     100,000-     100,000      10.300,000
    13.01.2010     Deliv.     Totals record     100,000-     100,000      10.300,000
    17.01.2010     StLcSt     SLFR     10.500,000      0,000      10.300,000
    13.01.2010     Order     Totals record     100,000-     100,000      10.300,000
    13.01.2010     Deliv.     Totals record     100,000-     100,000      10.300,000
    17.01.2010     BtchSt     123     10.500,000      0,000      10.400,000
    13.01.2010     Deliv.     Totals record     100,000-     100,000      10.400,000
    17.01.2010     BStLoc     123       /SLFR     10.500,000      0,000      10.400,000
    13.01.2010     Deliv.     Totals record     100,000-     100,000      10.400,000
    This is the whole table.
    This is what i got. i believe that it is an availability check problem, i just can't see what is the solution.
    SLFR is the Storage location of the issuing plant.

  • Extend Customer to Different Company code?

    Hi.
    How to extend Customer to Different Company code?
    ie, Cust1 is created with ABC company code, now i want to extend the same with XYZ company code.
    in same client.
    Reg,
    Antaa21

    Hi,
    In T.Code XD01 - Select relevant account group and enter new company code.
    Under reference option enter the existing customer number and sales org details click on continue button enter name and address details remaining information will be copied from existing customer and save.
    Thanks,
    Padmaja

Maybe you are looking for