Material field not apprearing with parameter effectivity.

Hey SAP experts,
We are using serianumber parameter effectivity in ECR. Now we have one small issue the column material is not appearing next to the columns upper limit serial number and lower limit serial number.
I tired all the SPRO settings and MM settings, basic settings field selection etc....but nothing worked out....
Can i get some help here please
regards,
satish

Hi Srinivas,
KUNDE_LO is a data element , what ever kombi1 is defined i think that does not have any values maintained in the system.
or
Check whether any user exits or BAPI's used bringing the customer specifications.
You can also check the data element existence u might have done that .....
Reward if useful
Thanks,

Similar Messages

Why are my fields not moving with my Dynamic stamp ? Only the artwork appears

Why are my fields not moving with my Dynamic stamp ? Only the artwork appears

Sounds like you're a candidate for Lightroom...based on the time you don't
want to spend in Photoshop.
Photoshop install media is likely created in large batches, perhaps in a
foreign country, so it's understandable that you get Photoshop 11.0.0 is on
the media.
I don't know as I would use ProPhotoRGB as my working space in Photoshop. I
was merely suggesting that you look at your color settings to make sure
things were the same on both machines.
How do you know your actions are the same? Did you copy the action
recording from one computer to the other, or did you merely record the same
steps on each one? Have you compared the details of each action step in the
Actions Palette to make sure they are the same? The symptoms still sound
like something different than sRGB being the output color-space, or the fact
it isn't embedded on one or the other of the computers.
How are you viewing the JPG when it looks the same or different than the
RAW? Are you looking at the side-by-side in Photoshop, or side-by-side in
Bridge, or are you using a mixture of viewers, one Adobe, and one not? And
are you using the Canon Codec on Vista or not? The Canon Codec would be
showing the camera-preview in the RAW not the RAW adjustments that Adobe has
done.
While the OS shouldn't be causing a difference in how the action is run, a
difference between OSes may make a difference in the processing to show up.
The camera profile associated with a RAW file is visible in the
third-from-right tab in ACR over at the right. The one with the little
DSLR-camera icon on the tab.
Can you attach the two JPGs on a reply, here, or if not, upload a ZIP of the
two JPGs and the RAW to a file-sharing site like http://www.rapidshare.com/
and post the download link(s)?

Engineering change management working with parameter effectivity

In Engineering change management
i have activated parameter effectivity &
defined parameter profile for DATE,SERNR,Kombi1-Customer(combination of Date & Customer name- Kunnr) in IMG settings
i am able to work with Date & SERNR But when i choose kombi1
i am getting the following error message
"No entries in database for object KUNDE_LO table AEEF"
i checked with table AEEF thier is no field KUNDE_LO
How to customize effectivity type Customer
is there any thing i have missed ....

Hi Srinivas,
KUNDE_LO is a data element , what ever kombi1 is defined i think that does not have any values maintained in the system.
or
Check whether any user exits or BAPI's used bringing the customer specifications.
You can also check the data element existence u might have done that .....
Reward if useful
Thanks,

Engineering change management with parameter effectivity

In Engineering change management
i have activated parameter effectivity &
defined parameter profile for DATE,SERNR,Kombi1-Customer(combination of Date & Customer name- Kunnr) in IMG settings
i am able to work with Date & SERNR But when i choose kombi1
i am getting the following error message
"No entries in database for object KUNDE_LO table AEEF"
i checked with table AEEF thier is no field KUNDE_LO
How to customize effectivity type Customer
is there any thing i have missed ....

Kunde_lo is a data element.
but i am not able to locate it in my SAP

Material field not getting displayed on Material Data tab in ME51n or ME21N

Material Field was missing in ME51n/ME21n.
I went into SPRO ->PReq-> Define Screen Layout at Document Level and checked Optional for Material field. Now it's showing up on the ITEM overview section of the Preq.
But its still missing on Material Data tab in ME51n or ME21N but I can see the Material field on the Item Overiew section of the Req/PO Screen.
Where exactly do I make the settings for the item level in SPRO?

We use the Enjoy screens and document types for ME51N/ME21N pretty much out of the box. We do not have the material master number on any of the detailed item tabs either. I do not think you can show it in the details unless you activate the customer specific fields tab.
Regards

Web Report not working with parameter form

Hi,
I have a report which has got a parameter form. This report is
running fine in client/server environment. But when I deploy the
same report on web (CGI) using PARAMFORM=YES, I am getting the
parameter form and after pressing the SUBMIT button I am getting
a blank report under the following two cases even though I have
data for that query:
CASE1: <input type="hidden" name="desformat" value="html">
then I am getting the report with no data retrieved.
CASE2: <input type="hidden" name="desformat" value="pdf">
then I am getting completely blank report (no logo, no column
titles, etc.)
See the HTML code below. Remember, the same thing is running
fine in client/server environment. Moreover, if I make a HTML-
coded form for the report then everything on the client's
browser is running fine. But this is not what we want, 'coz we
are running the "BEFORE PARAMETER FORM" trigger in the report.
So, should I conclude that web-reports does not work with the
parameter forms?? Is it a bug???
Regards
Moiz
----------HTML Code------------------
<form action="http://pc-oracle1.ri.kfupm.edu.sa/cgi-
bin/rwcgi60.exe">
Select the Weekend Date for which you would like to see your
Timesheet report
<input type="hidden" name="server" value="repserver">
<input type="hidden" name="report" value="timesheet.rdf">
<input type="hidden" name="userid" value="696122/696122@ors">
<input type="hidden" name="destype" value="cache">
<input type="hidden" name="desformat" value="html">
<input type="hidden" name="paramform" value = "yes">
<input type="submit" value="Run Report">
</p>
</form>
-------HTML Code END------------------
null

No pal, that's not the problem. The problem lies with the
"BEFORE PARAMETER FORM" report trigger on the web. Check this
out on ur report server and u will understand my problem.
Moiz
Ramonito Te (guest) wrote:
: I think the cause is the missing question mark after
rwcgi60.exe.
: Anyway here is my html file that runs under cgi. Hope this
helps.
: <HTML>
: 
: <FORM METHOD=POST
: ACTION="http://ntserver1/ows-bin/rwcgi60.exe?" METHOD="POST">
: 
: <INPUT name=server type=hidden value="ReportsServer">
: <INPUT name=paramform type=hidden value="yes">
: <CENTER><H1>Set Reports Multi-tier Server Parameters </H1>
Report Name: <INPUT name=report type=text value="c:
: \orant\webdemo\deptemp.rdf">
: Database Connection: <INPUT name=userid type=text
: value="scott/tiger@orcl81">
: <INPUT name=destype type=hidden value="cache">
: Output Format: <SELECT name=desformat> <OPTION value=HTMLCSS
: selected> HTMLCSS <OPTION
: alue=PDF> PDF </SELECT>
: <HR><INPUT type=submit value="Run Report!">
: </CENTER> </FORM> </HTML>
: lue="Run Report!">
: </CENTER> </FORM> </HTML>
: M. Moizuddin (guest) wrote:
: : Hi,
: : I have a report which has got a parameter form. This report
: is
: : running fine in client/server environment. But when I deploy
: the
: : same report on web (CGI) using PARAMFORM=YES, I am getting
the
: : parameter form and after pressing the SUBMIT button I am
: getting
: : a blank report under the following two cases even though I
: have
: : data for that query:
: : CASE1: <input type="hidden" name="desformat" value="html">
: : then I am getting the report with no data retrieved.
: : CASE2: <input type="hidden" name="desformat" value="pdf">
: : then I am getting completely blank report (no logo, no
column
: : titles, etc.)
: : See the HTML code below. Remember, the same thing is running
: : fine in client/server environment. Moreover, if I make a
HTML-
: : coded form for the report then everything on the client's
: : browser is running fine. But this is not what we want, 'coz
we
: : are running the "BEFORE PARAMETER FORM" trigger in the
report.
: : So, should I conclude that web-reports does not work with
the
: : parameter forms?? Is it a bug???
: : Regards
: : Moiz
: : ----------HTML Code------------------
: : <form action="http://pc-oracle1.ri.kfupm.edu.sa/cgi-
: : bin/rwcgi60.exe">
: : Select the Weekend Date for which you would like to see your
: : Timesheet report
: : <input type="hidden" name="server" value="repserver">
: : <input type="hidden" name="report" value="timesheet.rdf">
: : <input type="hidden" name="userid" value="696122/696122@ors">
: : <input type="hidden" name="destype" value="cache">
: : <input type="hidden" name="desformat" value="html">
: : <input type="hidden" name="paramform" value = "yes">
: : <input type="submit" value="Run Report">
: : </p>
: : </form>
: : -------HTML Code END------------------
null

Email fields not syncing with iPad

Friends, in syncing MacBook - iPad, the email fields are not synced (to iPad). Can anyone help?
I remember same thing happened with iPhone and MacBook.
Thanks in Advance
DRH

Tater,
I also have this problem. iTunes syncs previews of photos. However, Aperture doesn't reliably make the previews. (You may want to check your preview settings for your project. The setting may be set to not keep previews up to date, although your setting is probably fine and you are probably running into this bug.)
Even if you delete the previews in Aperture and then regenerate them, Aperture will not necessarily create previews for all of the photos you selected. At least, not when you want to. I have found no reliable way for this to work. I generally delete previews, exit Aperture, reload Aperture, generate previews, exit Aperture, and then still wonder when it will take effect.
One thing I have noticed: even with the "Share previews 'Always'" set in the Aperture preferences, Aperture will not share new previews all the time. I say this because the "always" setting is supposed to make previews for sharing with other applications, but then sometimes when I exit Aperture, Aperture tells me it is updating previews for sharing! Why, if it is "always" sharing previews, does it need to generate them at exit? Anyway, I generally wait to see that little window upon exiting Aperture to let me know that things are probably correct.
FYI, the "Browse Aperture Library" function of iPhoto also uses previews, so I use that function to show me what iTunes will sync, without having to wait for iTunes.
nathan

CV Artsmart not working with After Effects CC 2014

I'm trying to do a simple Path Spread animation with CV Artsmart (Cineversity plugin) but when I open the animation in After Effect CC with Cineware the animation does not display, it works perfectly in Cinema 4d r15 ...is this a bug or known issue, is there a work around?
k.regards

Not all plug-ins work with Cineware.
Also, make sure that you are targeting your installed edition of Cinema 4D R15, rather than the bundled Cinema 4D Lite, as described here:
After Effects CC (12.1)

Date Field not initialized with DBDATETIME/DBDATE

Hi,
I have form in oracle 9i(I also attached calender provided as PJC on oracle's site) with one field of date type with the Initial value of $$dbdate$$/$$dbdatetime$$
but at the time of run this field doesnot inialized as it should be with the current date and time, some one plz help me.
Thanks and Regards
Khawar
Message was edited by:
skhawar03

hi.
i have a feeling that upon execution, the focus of the form is set to start with that particular field. Thus causing the initial value to be cleared of. Try to navigate to another block other than the one with your date field at the start.
This is how i fixed it when i had the same problem. This may/may not work.
Message was edited by:
Pradeep Shanmugham for gramatical clarfication

Ops can not open with parameter ipc_net=ics0

tru645.1A+oracle8.1.7.0.0 ops
oracle suddenly shutdown abort every about a month
I check these errors in the logfile.
symptom: Errors found in the alert.log
symptom: SSKGXP_IP: Primary interface down
symptom: location sskgxpmyip6
symptom: Lock Monitor tracefile contains errors
symptom: sskgxp_myip: ioctl failed with 6 for mc0
symptom: operation mc0
I get tips from oracle expert adding parameter ipc_net=ics0 in init file.After I add the parameter,Oracle
can not open.ics0 is up and memory channel is ok.when the parmeter is removed,oracle can startup.I don't know why,can u help me.thanks

Can you be more specific than "can not connect to database"? What error do you get, or what is the behavior exactly?
What are you using for connectivity? Is it indeed ODBC, which you've filed this under?
Is this deployed on a 64 bit box? If so, do you have the IIS app pool set to 32 bit, since your assembly is set to target 32 bit?
Greg

Material Type not assosiated with Materials

Hi ,
I have a report in BW, where there are 4 Materials that are being displayed for which there are "no assosiated" Material Types and this information is coming from R/3 where these Materials have been assigned to a Material type .
These Materials and Material types are being entered through the respective variables when runing the report. When i click on the Materail variable to enter the values i dont see the 4 Materials( the one stated above) listed here. When i select material type as "not assigned" the report displays these 4 Materials in the report.
I also checked the master data in 0MATERIAL and i dont these 4 materials.
Please help me in solving this
Regards
Arjun

I would like to clarify u one thing here.
1) Material Type is an Attribute of Material.
2) The values to these are entered through Variables while executing the report.
3) When I select the value for material type as "Not assigned" , only then these 4 material values get displayed.
4) From Point 3 above , it means that the data is loaded into BW.
5) I dont see these 4 Material values in all the following cases:
a) When i try to enter the Material values through the variable screen while running the report.
b) When i check the material values in the master data 0material.

CC 2014 Palette Form Fields Not Recognized with Dual Monitors

When I'm using a dual monitor setup, my second palette monitor (usually my MBP) can render palette form fields unclickable. For example, if I want to click into the form field to change the stroke size, my pointer clicks straight through to the finder as if the palette wasn't there. However, I'm still able to grab the top of the palette and move it to the main monitor. When I do this, the palette works fine, moving it back recreates the issue. This problem is intermittent, but has happened a handful of times in the last month.
So far I've experienced this with Illustrator CC and CC 2014 as well as Photoshop CC 2014.
My current setup is a 2013 2.6 GHz MBP with 10.9.4 and the most recent versions of CC and CC 2014.
Any ideas?

oh, forgot to say Mavericks 10.9.5 running on the mac pro..

Finish good material not showed with 131 movement type in mfbf code in REM

Hi experts,
I am working in Repetitive manufacturing process, I have 6 operations in rate routing from which 6th operation is mile stone.
When i confirm last operation through MFBF, system shows components list with movement type 261 but finish material is not showing with movement type 131. The document no. is generated at the time of saving but in displayed document FG shows with 131mov. type and component list with 261.
Setting for REM are as follows
1. control key- pp03
2. production versions- maintained with standard REM profile
So my question is how can i see FG material in MFBF screen along with componets list ? What is the settings for this or any development is there ?
Regards,
Nitin Nerkar

Nitin,
System behavior is not wrong. What i understand from Backflush is, Back flushing is nothing but automatic goods issue. System will automatically posts the goods issue when you confirm the operations.You have no need to make manual issue. It will reduce the effort.
Backflushing is automatic accounting (Goods issues - 261 mvt) of material consumed for production, at the time of confirmation.
When you use auto goods receipt indicator then at the time of confirmation system will do auto GR. In normal discrete mfg scenario, when you are doing confirmation when you click on GOOD MOVEMENT tab you will get GI as well as GR with movement type.
But in REM scenario you doing MFBF (REM Backflush) means This activity executes multiple activities in a single step, such as: finished product goods receipt, backflush of component materials, posting of costs to cost collector and creation of material and accounting documents. When you are doing MFBF and clicking on post with correction tab it will show you what are the components going to backflush, and that is ok. Here you are not going GOODS MOVEMENT tab to display GR.
I think this SAP system std behavior.
Tara

No routing selection in order through parameter effectivity

Hi,
I have created routing and BOM in CEWB with parameter effectivity with change number. But while creating order in co08 with sale order no; i am getting the error message as no routing found. The sale order no we are mentioning as parameter effectivity no while routing, BOM, Change no. creation. With the change no; i am creating the routing and bom. But in while order creation i am not getting the routing and bom. Please help me where i have done the wrong. weather in parameter effectivity creation or is there any integration of order creation with sale order no ? Please guide me why i am not getting the routing to my order. And i have to get the operational data of parameter effectivity of 1311 sale order only. i have created routing and bom with parameter effectivity 1308 to open interval.
Regards,
Mastan.

I assume these 3 tyres are 3 different material number in BOM at 3 different position and get selected with a selection condition as per user assignmnet of values? in same way in super routing there can be 3 different operation to which these materials can be assigned or there can be only one operation which will work as " Tyre assembly"
These 3 tyres are three different materials namely pirelli_tyre, goodyear_tyre and MRF_tyre. They are all in the same position in the BOM. Depending on the value assigned to the characteristic Tyre_type any one of the above 3 materials will be selected.
I created one sales order and my when converting the planned order to production order it throws the following error. I am able to proceed with a warning for both 'yes' and 'know' options. Let's say I click yes now, and then I proceed and then I go to the 'Production order create: Header' screen. Now when I click the button 'operation overview' on top I am able to see an operation which is not at all present in my super routing. Don't know how this happens .
Whereas for another component (dirtbike_Frame) in the BOM I created a separate routing with one single operation and assigned it to the material (dirtbike_frame) apart from assigning it in the super routing and writing the correct selection condition so for this material (dirtbike_frame) the routing gets picked properly.
BR, Thileepan P

ECM-parameter effectivity-history

Hello Team,
For my client we are using ECM with parameter effecitivity concept and below is my problem
When i use normal ECR without parameter effectivity and perform the changes in BOM when the final approver goes to reporting he can see what all changes has been done whether added or deleted etc....
But when we use ECR with parameter effectivity, i am not able to see any history in reporting section. How can the final approver come to know what all changes has been made in that BOM. Offcourse any additions or quantity changes can be seen as ECM is there next to that. But how can one see the consolidated changes if any part number has been deleted using that ECM even change in qty or additons have to be compared with older BOMs which is difficult.
Please help me on the same.
regards,
sai

Hello Sai,
Try if you can use 'ECM Information System' : Tcode- CC07.
Hope it will help.
Regards,
Anup

Material field not apprearing with parameter effectivity.

Similar Messages

Maybe you are looking for