Material form Packed, Loose is maintained for RG1 Register----where?
Pls Suggest me to solve the problem. I want to know where the material form is maintained. P for packed, L for Loose. In RG1 register for Packed material everything is getting reflected in RG1 Register. Whereas for loose material opening balance, Total of opening and manufacture & Closing balance are not getting reflacted in Rg1 register.
I have checked till the date all production & issue are there in J_1IRG1 table after J1I5. After extracting the thru J2I5 only packed material is getting updated in J_2IRG1BAL table. But not the loose or unspecified material. However my clients need to get packed as well as loose material in RG1 register.
Manually in development client i changed the Losse or unspecified material as Packed by direct table entry in J_1IRG1 for testing. After doing the same when i extract the data thru J2I5, everything is coming in J_2IRG1BAL table. And getting reflected in RG1 register.
Now I have to change the Loose material as Packed material. So my problem will be solved. That is my objective.
Pls tell me how to do the change. Is any config setting or assignment?
Its urgent.
NB: helpfull answer will be awarded.
Regards
Srimanta
Edited by: Srimanta De on Jun 25, 2008 11:46 AM
Srimanta,
for better and quick reply post this thread in MM section.
Amit.
Similar Messages
-
Different material description for RG1 register
Dear Experts,
I have a client requirement for change in material description (materialmaster) to a different description.
The description maintained in material master is for viz
SS CT BT 200mm-123-093MKO
But excise need description
SS BILLET
Where to maintain this additional description in material master and fetch the same for RG1 register.
Let me know any stranded user exit is available. If the above case is possible than also let me know what would be the bad implications on processes (like stock will not match with description).
Regards,
RB
Edited by: RB on Feb 26, 2009 6:18 PMyou either create a quickview by joining MARC and MAKT tables for this.
or much easier. you press F4 in a material number field.
then you go to search help W plant material.
there you erase the language from the selection pop-up and execute
in the hitlist do a right mouse click and you can directly download -
J2I5 Error for RG1 Register.
Dear All,
When I am running J2I5 transaction code to update RG1 Register The following error appears Plant code 1001 does not exist
Message no. 8I546
I have checked my settings for excise group and the required plant 1001 is assigned, hence please let me know what other settings I need to check or maintain.
Kind Regards
AtulHi Laxmipathy,
Thanks for your reply I have checked the required settings however the address is maintained there only county code and city code are not maintained in the address for plant, please advise what else could be the reason for the same.
Kind Regards
Atul -
RG1 register opening balance and closing balance updation
Hi All,
We are using the RG1 register recently i.e. after the Functional Upgrade (ECC 6.0). While executing J2I6 RG1 Excel report, opening balance and closing balance is not appearing in the report even though we have done the J1I5 extraction.
Is it mandatory to update the J_2IRG1BAL table with zero stock as and when the new material codes are created.
Regards,
PraveenHI
Yes it is mandatory to update the table J_2IRG1BAL with material form and opening stock etc. for all the new materials
EXGRP: Excise group of the material
DATUM: Date from which you want RG1 report i.e. 01.01.2004
MATNR: Material
FORM: P for packed, L for loose. note that the same material cannot be maintained as both packed and loose.
WERKS: Leave it blank
Maintain all relevant opening balance fields. These fields start with OP
Note 951955 - CIN: General clarifications for RG1 goods*
check the above note
regards
Prashanth -
RG1 Register Opening and Closing balance
Dear Expert,
As per Snote 951955 for Initial RG1 register update whether we have to give the opening Quantity in the table J_2IRG1BAL along with material form.
Can we re extract after updating this values in table J_2IRG1BAL will the value come .
Also after extracting the RG1 register there are no excise values for Receipts line items.
The tax rate filed is also blank do we have to do any other special configuration for this values to some.
Your expert advise will be highly appreciated.
Edited by: lolu jo on Aug 17, 2011 7:32 AMHI
Yes it is mandatory to update the table J_2IRG1BAL with material form and opening stock etc. for all the new materials
EXGRP: Excise group of the material
DATUM: Date from which you want RG1 report i.e. 01.01.2004
MATNR: Material
FORM: P for packed, L for loose. note that the same material cannot be maintained as both packed and loose.
WERKS: Leave it blank
Maintain all relevant opening balance fields. These fields start with OP
Note 951955 - CIN: General clarifications for RG1 goods*
check the above note
regards
Prashanth -
RG1 Register : opening & closing balance does not match with actual Stock
Hi
I am working on SAP AFS 6.0.
The RG1 register for a particular month displays data of only those materials which have been transacted in that month. I checked the tables J_1IRG1 and J_2IRG1BAL found that system retrives all records of the given period from the table J_1IRG1 and picks opening balance of these records from the table J_2IRG1BAL. The records of those materials which have closing balance in J_2IRG1BAL but was not transacted in the given period are not considered in RG1 register.
I want RG1 register to show opening balance of all materials which have closing balance in J_2IRG1BAL but have not been transacted in the subsequent periods.
Regards
NirajHI
Yes it is mandatory to update the table J_2IRG1BAL with material form and opening stock etc. for all the new materials
EXGRP: Excise group of the material
DATUM: Date from which you want RG1 report i.e. 01.01.2004
MATNR: Material
FORM: P for packed, L for loose. note that the same material cannot be maintained as both packed and loose.
WERKS: Leave it blank
Maintain all relevant opening balance fields. These fields start with OP
Note 951955 - CIN: General clarifications for RG1 goods*
check the above note
regards
Prashanth -
Opening and Closing balances in RG1 register
Hi,
We are facing one issue in RG1 register. When we update and extract the RG1 register from system, its showing Sales Qty and Excise duties properly. But opening and closing balances are not coming, its showing zero there. I checked J_2IRG1BAL table and found that it is also not getting updated. Material comes into stock with 561(initial stock) and 101(from production) movement types but opening/closing balances not coming in either case. Both movement types are activated for RG1 also.
Seeking your help in this regard.....
Regards,
Satyendra SoniHi Satyendra ,
For initial upload in RG1 there are 2 tables you need to manually update. J_2IRG1BAL from CIN or SD side. And Accounts to be updated for Balance in J_2IACCBAL.
There are 2 ways for updating balance tables
On last day of month enter Balance in Closing balance field.
OR enter opening balance on 1 st day of month.
Also check Material form P ,can be maintained in user exit for permanent effect.
After updating balances ,
perform any one transaction on system.
and then Extract the Rg1 table .
Ask FI consultant to put in FI JV after balance upload in ACCBAL table.
If you have not done table entries before performing transaction and extraction of RG1 then balances will not appear .
Check with your senior there and use table edit in such case (I hope you are not on production server at the moment) .Then again perform Extraction and check once.
SD FI and ABAP to be present and take decision accordingly. -
Excisie duty updation problem during RG1 register update
Dear All,
During updation od RG1 register, excise duty has not been updated in Rg1 register. Transactional entry updated but Exice duty/ ecs/ CEss is showing zero value.
It happened with two materials only. all excise master data has been maintained for that material.
What will be reason ?
Your valuable reply is appreciated. Thanks
Regards
MangeshHi Mangesh,
I hope you are using the std transaction J1I5 for RG1 Register update.
Normally we update the RG1 Register using the material documents.
So check whether for the material documents which you updated whether an excise invoice has been created or not ? because std - J1I5 transaction doesnt check the same.
If you have updated the RG1 register after creating the excise invoice for the above materials doc's then excise value will be updated in the same.
IF its not happening then check if any SAP notes are available.
Hope its clear.
Regards, -
Error in excise duty values in RG1 register
Dear All,
While extracting the RG1 registers it has been found that values for Basic excise duties, Education cess and SH edu. cess are not appearing properly.
I have verified the following
1. There were 3 deliveries against which 3 separate invoices have been created. Against these 3 invoices, 3 excise invoices have been created. All the inoices are posted to accounting.
2. Sales material as well as sold to and ship to parties are same in all the three invoices.
3. Dispatch location i.e. plant is same for all 3 invoices.
4. In J_1IEXCDTL table EXBAS as well as EXBED, ECS and EXADDTAX1values are appearing properly for all the 3 line items.
But no values are coming for 2 line tiems; whereas correct values are coming in 1 line item in the Excel download as well script for RG1 register.
Please help ASAP.
Thanks & Regards
PiyushDear Lakshmipathi,
All the 3 invoices are psoted to accounts. All the 3 excises invoices are also posted to accounts. Duty values are flowing properly.
The problem is in the RG1 register extraction.
BED, ECS and HCS values are displayed for line 1 but it is blank for remaining 2 line items.
Thanks & Regards
Piyush -
1. How to View RG1 Register. What is the T-Code?
2. We are Manufacturing different Sizes of Products eg #0, #1, #2, #3. Is there any provision to update RG1 Size Wise.
3. Also tell Provision to see agaist H-Form, CST, CT-3 and Export sales wise.
Regards
bussprabuHi,
I am new to sap. So Could you please explain me how to activate rg1 register & where i will update rg1 register. Its a very immediate requirement.
Thanks & Regards,
Manas Behera -
Re:5% packing charges to be maintained for the material
Hi guru's,
Can anybody guide where can I maintain packing charges as 5% for the given material, my enduser also wish to maintain purchasing info record for the same material earlier it was not maintained. my tax procedure is TAXINN.
thanks
tuljasingh.Hi
Please copy the Condition type FRA1, Remove the accrual flag (if you want to post the cost onto material cost)
Add the Condition type as a step in the Calculation schema.
Use the new condition type for capturing the Packing charges of 5 %
Thanks & Regards
kishore -
Excise Invoice cannot be captured for RG1(Finished Goods) material
Dear Friends,
While creating GR and choosing the option only capture Excise Invoice system showing error as follows:
Excise Invoice cannot be captured for RG1(Finished Goods) material
Message no. 4F276
The Material is a Raw Material(ROH) and Price control is "V".Pl tell me and earlier 3 times GR is done on this material w/o error.
Pl help me how to get rid of this error.
Regards,
AskIn GR check in Excise item tab under excise item whether it is showing Raw Material or Finished goods?
Simulteneously check in J1ID for the said material & chapter-id combination what material type has been maintained?
Regards,
Indranil -
Hello all,
my requirement is, system should give error message while creating sales order, if chapter ID is not maintained for a material and plant combination.
please suggest the user exit.Hi
CASE 1 : All Plants are excisable.
In Material master , Foreign Trade data tab- mentioned Control code field mandatory. ( i.e nothing but Chapter ID)
CASE 2 : Few Plants are excisable
In the Case 2 you need to go for Enhancement
Program Name : MV45AFZB
User Exit: USEREXIT_CHECK_VBAP ( Item Level Check )
By using above user exit you write a logic with the help of ABAPer
Plant and Chapter ID combination table : J_1IMTCHID -
Excise duty: error 9914 No material data maintained for company code
Dear all,
when executing transaction /BEV2/EDDS I get error 9914 No material data maintained for company code in some material documents.
However, I see material is correct.
Can you tell me which views of material master am I missing?
What do I need to check?
Thanks in advance,
FSettings in material master "Basic view 1"
-
Assessable value not maintained for the material X
Dear all,
i have maintained material chapter ID,Plant and materialchapter id combination ,assessable value , cenvat determination, and vendor excise details in the transaction J1ID .
Even after maintaining all these conditions , i am not able to save the po,while saving the po i got a error message that assessable value not maintained for the material X..
Points will be rewarded for useful suggestions.
Thanks in Advance.
velu+91-9789991357Hi,
Search using approriate keywords in SDN, u get most of the details, i have now done the same searched and have pasted below .
Try ME2N.
Click on the "dynamic selections" icon and add the release indicator as an additional selection. Enter the release indicators that you class as "awaiting approval" and you will then have your list.
The ME2* series of transactions are not that much use prior to 4.7, the layout is poor. But if you have 4.7 or later you can get the screen to use the ALV format and this transforms the ME2* (i.e. ME2L, ME2M, ME2N etc.) transactions into VERY useful reports.
Maybe you are looking for
-
Help with IE 11 in Win 8.1
When ever I use IE11.0.11 (KB2976627) in Win 8.1 I get blank pop ups pages when I am browsing the net. This has been occurring for a couple of days since some up dates. I have run various fixes, but nothing has cured it. I need the pop ups to work co
-
I'm having a problem with a credit card purchase I made through logmein trial version. Granted I'll pay for it now, but the phone should have asked if I would authorize the purchase. So I feel that apple owes me for the mistake and pay up. As manager
-
How can i skip the last lline while loading from a file? I dont thnk SKIP would help me, Please can someone help me to achieve this in SQL LOADER. Cheers
-
Apex 4.2 200 Page Items limit
Hi, I have a master-detail form which was getting close to the 100 items per page limit in Apex 4.0 which I then scaled back and got to work properly. I had thought that I could start adding more columns to the detail part of the form since 4.2 was s
-
This is my first mac. I am trying to create a dvd with pictures. I created the slideshow fine. I added the song from itunes fine. when I try to preview the project, a message comes up saying that my computer is not authorized to play this song. I go