Material group & Account Assignment Category

All,
Whether we can make Material group and Accout assignment link in PR.?
Suppose I am creating a PR and selecting a Account Assignment , only specific material groups I shoulb able to select , whether I can make that settings ?
Kindly advise the best practices .
regards

Arif ,
If I have selected a account assignment ,(for eg 'A') , in PR , then whether I can restrict the materiaL Groups , in such a way that , material groups which should be used for Asset only can be selected in PR ?
Suppose I am having material groups A1, A2, A3, for asset .
And M1,M2,M3 for Misc Non Stock .
Then suppose if I am creating a PR with account assignment 'A' , then only I should be able to select A1 or A2 or A3 .
If I am selecting M1,M2,M3 , then it shud give some error .
This is possible ?
Pls advise.
regards

Similar Messages

  • How to enter an account assignment category for a material.

    Hi guys:
       I am facing following error prompt,please tell me how to enter an account assignment category for a material.
    thanks
    Account assignment mandatory for material 0000000N6451 (enter acc. ***. cat.)
    Message no. ME062
    Diagnosis
    There is no provision for value-based inventory management for this material type in this plant. Account assignment is thus necessary.
    Procedure
    Please enter an account assignment category.

    HI Shyam :
    Go to transaction type OMS2. Check whether the material type u are using is ticked for Value update.
    If not,
    a. Use a different material type
    b. or Use an account assignment category.
    How to use B,that is hot to enter an account assignment cateogory

  • How to Assignment between Material and Account Assignment Group

    Hi,
    When we are creating a sales order with material ABCD, then in material line item -->under Billing Document Tab --> in Accounting screen, there is field Acct asgnmt grp (Account Assignment Group).
    From where we can assign between Material and Account Assignment Group, after that it automatically pick in sales order creation.
    Please guide..

    Please refere to below link it may help.
    Re: how to configure new account assignment group of material
    Thanks Dev.

  • Account assignment category F not showing in PR & PO for stock material.

    Dear All,
    I have created one breakdown maintenance order in that i have planned one stock (L) material, for this reservation is created.
    Then i have run mrp by using tcode md03 for that material.......pr is generated.
    Now when i am going to convert this pr into po, system dosen't show account assignment category for this pr as "F"
    Also when i see in change pr tcode me52n.........._system dosen't show account assignment category as "F"_
    Actually system must show account assignment cateory as* "F" in pr & while converting pr to po.*
    How i can resolved this issue. Any config setting is to be done kindly give the step by step procedure.
    Thanks & Regards,
    Sandeep

    Hi,
    When you select L stock Item that means the material will come under stock at stores. And then goods issue will be done against your reservation.
    Coming to account assigned PR as F order then when GR is done agaist PO the material is directley isued to the order. From MRP system only checks agaist that material what the requirement and what is available stock, if short fall exists then it will generate PR with out any account assignment based on material master setting.
    For ex if for the same material requirement has come from 4 orders then which order no system will consider to generate a PR.
    Hope it is helpful.
    Regards,
    N.Nagaraju

  • Account Assignment Category & Test material combination

    Hi,
       Please look into this issue
       System allowing me to create the PO with combination of Account Assignment category"Q" and "Test material(With out Material code)",but it is giving error message while posting the GR(Account determination error)
    In this scenario I am expecting the error message should appear while creating the PO it self,how to block this combination?
    Regards
    Hari

    Hi Hari
    check in SPRO what account modifier is assigned to Acc Assn categ. Q, then in OBYC check in GBB if a G/L account is assigned against selected account modifier.
    i have got this idea from a solution provided by YOGESH and STEVE in the below thread:
    Re: PO
    Anjajn

  • PO: Default Account assignment category per material?

    Hello,
    The requierement of my company is that some materials are purchased for stock and some others for Cost center. But at some point they want to move some of the materials of "cost center" into "stock". So materials will be  "looking" the same in questions of views created, etc.
    So it would be good if there is a way to default the account assignement category by material. Any idea? User-exit?...any possibility totally standard of doing this (withouth enhancemnet/user-exit)?
    Release 4.6c

    Hi,
    It can be done by having two doc. types in the PO one for the stock and the other one for the consumption.No need for the two material types.
    In doc type xy -account assignment is disabled, in the other doc type XZ the account assignment is enabled.
    Also using the user exit ME_PROCESS_CUST, you can define the condition against the doc type.
    Regards,
    velu

  • Material No. Mandatory with account assignment category K

    Dear,
    Can i make Material No. Mandatory with account assignment category K
    Please advise
    Rami

    Hi,
    It is not possible to make material number mandatory for Account Assignment Category.
    But you can make Account Assignment mandatory for a material if material is non-valuated (Mat Type - UNBW) or Non-stock (Mat Type - NLAG)

  • Purchase Requisition / Order: Account Assignment Category for material type

    Hi,
    When creating a PR or PO for one specific material I would like the system to propose a specific account assignment Category for this material. It shouldn't allow the user to change this account assignment category.
    Is it possible? How should I proceed?
    Thanks in advance.
    Luis.

    I dont think there is any standard procedure for doing this.
    My idea would be to use a user exit say EXIT_SAPLMEREQ_010 for PR and a similar exit for PO and code a Error message check for Material type and account assignment combination.
    For ex : EXIT_SAPLMEREQ_010 is a exit which is called during check in a PR . SO when the user enters a combination of Material type and Acc assignment u can check for the requirements.

  • Account Assignment Category in Rework Order for non valuated material

    Friends,
    We created non valuated material for rework. I want to accumulate the rework cost. When i am trying in CO02 = Header = Settlement Rule where the category is MAT but I want it to be ORD.
    How that category is changed to ORD, so that I can able to accumulate cost with respect to order?

    Hi,
    Whether you are creating the rework order with material? Actually rework order is supposed to be created without material with transaction CO07. Here in this case you have to define the account assignment category ORD in settlement rule.
    In some cases to meet the requirement we can create the rework order with material also through transaction CO01/CO08, but in this case the account assignment category will be MAT by default. Therefore you cannot change it to ORD.
    Hence you need to create rework order to have account assignment category ORD w/o material only.
    Regards,
    Sandeep

  • Non stock material - Account assignment category Q

    Dear All,
    I have came across a strange situation.
    For non stock material, qty update and value update is un checked in configuration.
    When I am trying to create PR or PO for non stock material, system is giving an error for account assignment category.
    Upto this, everything is fine.
    Now when I am entering account assignment category - Q, system is allowing me. Further ahead, when I am doing GRN, stock is also generated which is against the SAP standard practise. Because stock should be consumed for non-stock material.
    However, for other account assignment category, system is not generating stock and directly consumes the material.
    Once stock is generated, system is also not allowing issue of this material, because qty update is unchecked.
    Would request you to please help me. Do I need to do any configuration in the system for this.?
    Please help.
    Thanks & Regards,
    MP

    Hello,
    Thank you ver much for your inputs.
    But the problem is, how come stock generated for a material of material type "non-stock material". As per standard practise, non-stock material should be directly consumed and can not come in stock.
    Problem comes only when we use account assignment category - "Q". For other account assignment categories, stock is getting consumed.
    Thanks & Regards,
    Mihir Popat

  • G/L account defaulting in purchase order with account assignment category.

    Hello Gurus,
    when creating a purchase order item  with account assignment category - E, system is defaulting G/L account in account assignment tab for that item.
    We have material group defined for this material in material master.
    Please help me in finding why this is happening and from where this G/L account value is considered.
    regards,
    Steve.

    Hi,
    Ckeck in KA01 and that particular GL Acct. might be assigned to cost element.
    For eg if the G/L account is 400000 in that account on top in menu you will find edit cost element .so check in wether it is maintained.
    once check and reply.
    Check in OKB9 whether g/l account and cost centre is maintained for your company code.
    Edited by: V K on Mar 31, 2008 6:34 AM

  • G/L Account default in purchase order with account assignment category K

    Hello gurus,
    when creating a new position in a purchase order with account assignment category K "Cost Center", the G/L Account No. is always filled with a default account.
    Where and how can I define, what account is used as default GL Account?
    The version is sap ecc 6.0.
    I will reward points all answer!!
    Thank you!

    Hi
    check the valaution class assigned to the material or the material group (if no material is being used)
    Now goto OBYC, Click on the transaction key GBB, for the account modifier VBR, & for the valuation clqass combination - check the G/L account.
    Based on this combination the G/L is determined auitomatically in the PO. if you chnage it here ... it will reflect in PO at the time of creation.
    Thanks & Regards
    Kishore

  • Create Purchase Order - Account Assignment Category Q

    Hi experts,
    I'm trying to create a purchase order with account assignment category "Q" and the system show me the error message ME083 - Enter GR non-valuated.
    The material type is HIBE. The Quantity and value updating are flagged.
    Does anybody can help me?
    Thanks in advance.
    Osmar.

    Hi Jurgen,
    It was necessary change the settings below.
    SPRO -> IMG -> MM -> Purchasing -> Purchase Order -> Define Screen
    Layout at Document Level
    FldSI = AKTV ( change )
    Field selection group = GR/IR control
    GR/IR indicator = required entry.
    Set the GR/IR indicator to "Opt. entry".
    With that, the issue message ME083 will not appear when the Flag "GR
    non-valuated" is unchecked.
    Thanks.

  • Asking Account Assignment Category for Direct Materials

    Experts,
    ECS Scenario with PPS, ECC EHP4, SRM7.0.
    The system is giving error as 'account assignment category is missing' for 'direct materials'. We have same problem while creating SC in SRM also and for PDP als.
    Items with account assignment are working perfecly fine for both SC and PDP, for same product category.
    For PDP: System did not give any error at PR stage, but if see log in SLG1 in SRM, we see that, it did not transfer to SRM as 'account assignment category' is missing.. moreover, If we create a standard PO item, for the same material group (without reference to PR) it is pefectly working. GR, IR everything is fine in ECC... So there should not be any problem in ECC account assignment(?).
    We have not implimented any BADI. Just used the standard, as it is... Product category, location, storage location are maintained in PPOMA_BBP. Accounting system for vendor is also maintained...
    What could be other possiblities? kindly help.
    GH

    hi
    Can you create sc see  account assignment folder though ypu order as direct material in PPS scenario?
    please check BBP_PDIGP-subtype =dp and external requirement.
    SAP has designed like that for PPS scenario
    Direct materials with account assignment
    check with SAP, Learn that SRM not creates a shopping cart for direct materials for the purchase requests.
    since they are throwing explicitly error message
    'account assignment category is missing' for 'direct materials'
    Muthu

  • Account assignment category in production order

    Hi all,
    When I create a production order, the account assignment category coming is OIT - Order Item where as it should be MAT because in order type dependent parameters - distribution rule - Production Mat.Full settlement, is maintained.  Is there any setting missing from production side if any?
    Regards,
    Yogesh

    Hi,
    If you are using a nonvaluated sales order stock, you can only use full settlement for the manufacturing orders assigned to a sales order item. At the end of the period, the costs are settled from the manufacturing orders assigned to the sales document item.The inventory values are calculated on the sales document item when you perform results analysis. You then settle the inventory values calculated in results analysis to Financial Accounting and Profit Center Accounting.
    Please check strategy group of the material and settlement profile.
    Regards,
    Rajarao.

Maybe you are looking for

  • F110/ FBZP - maximum amount paid per Vendor in Payment run

    Hi How do i create payment run where i want to restrict the maximum paid to a vendor per transaction. If amount exceeds this, i still wish to pay, but to split over more than one payment order Our BACS payments are now being processed via FASTER PAYM

  • Javascript with PL/Sql

    Hi everyone, I want to know if it's a good idea to use javascript with PL/sql using HTML-DB (PL) (enabled and disabled button) ? Thank you very much. Bye. Eric

  • XI - BPM Split Message

    Hi I am doing some BPM and I have a scenario where we send a message into BPM and I need to split the message. The Source Message has Header, Account and Details I want to split this so one message has Header and Account The other Message has Header

  • 1st generations AppleTv won't show iTunes purchases

    I recently got a 1st generation apple tv. I hooked it up and all, signes in with my apple ID but it doenst show any of my iTunes purchases that i bought on my mac book air...any advise?

  • Security in oracle

    Hello, I'm planning to write my bachelor thesis and i'm writing about Security in Oracle database. I heard that security is an audit subject and it's interesting to talk about security. I wanna know what can i do at the practice part of my thesis? I