Material group chang even when request is rejected

Hi Experts,
I am designing a WF where to change the Material Group need approval of supervisor if rejected by supervisor workflow initiator will get a mail for rejection and material group will not be changed.
I designed and linked it to the event the WF is triggering properly but the problem is when supervisor reject the request the WF initiator get a mail but Material group is not set to itu2019s previous value it is getting changed.
Regards
Bikas

Hello Bikas,
The workflow is going to be triggered only when you save the changes that you have made to the material group. So to revert the changes when the superior rejects the proposal, You have to create a method in which the the material group is changed to the previous value. For that reason what I feel, get the previous value of the material group from the CDHDR and CDPOS tables and create a background process(a BDC) which updates the material group to the previous value. Use this method in a step in the workflow that you have designed.
Hope this will help you.
Regards,
Sam

Similar Messages

  • Can I change material group or division when the material still has stock?

    What will be effected?
    Thanks in advance,
    Linda
    Edited by: Linda Gao on Jun 23, 2011 6:06 PM

    Division: Changing a division might not have much impact.
    Material Group: Changing a material group will impact on the Purchasing.
      -->The info structures statistics might already been updated with the old material group.
    --> The release strategy has to be checked if you are using the material group.
    --> POs which has been ordered with the material group (like service)

  • I am in Muse 2014.3. When I edit a page, in the preview everything looks fine, but when I upload it to FTP, the page does not change, even when I upload the whole site. Is this a bug? I don't know what to do.

    I am in Muse 2014.3. When I edit a page, in the preview everything looks fine, but when I upload it to FTP, the page does not change, even when I upload the whole site. Is this a bug? I don't know what to do.

    Hi Jaap,
    Are you sure about your FTP credentials (FTP folder and site URL) that you are using for the upload? Are you able to see the updated files in the remote directory of the FTP server, after you finish uploading the muse file, using an external FTP client like FileZilla?
    Thanks
    -Prashanth

  • My airport express seems to be broken -- light is yellow and does not flash and doesn't change even when I press the "reset".  Tried unplugging and reset -- still a solid yellow.

    AX light is yellow and does not flash and doesn't change even when I press the "reset".  Tried unplugging and reset -- still a solid yellow. I assume this is a goner?

    Unfortunately, based on your description, I would have to second that your Express is a "goner." However, before giving up on the unit, be sure that you attempt a "factory default" reset at least 3x just to be sure.

  • ARD 3 not prompting user to save changes even when told to

    Hello! I have ARD 3 and when I send out a restart command and select the radio option "Users can save changes or cancel restart" it acts as if I didn't select this, and instead selected "Users lose unsaved changes".
    This has never worked for me. If working properly, it SHOULD actually show up on the affected computer a dialog popup of some sort providing the user just those option: to save changes or cancel restart.
    What is wrong/going on, and how do I fix it?
    Thanks ahead of time,
    Sam Marcus

    Slava Natapov wrote:
    Samita wrote:
    Whenever a user changes some items in Block_1 and presses save button, the values from non_db items get copied to the db_items (based on view) and commit_form is called. Try to copy values to the db_items not in save button, but in WHEN-VALIDATE_ITEM of non_db items.- I created the non-db items becoz, it was asking me 'Do you want to save changes', even when I only queried data from the view (becoz i was doing some computations while displaying the items. and the form assumed that the DB items were begin changed ). Inorder to get rid of that problem, i used mirror_items (non-db) for all the db items.
    So under this scenario, when i copy values to the db_items in WHEN-VALIDATE_ITEM trigger of non_db items, the form considers the db_items are changed and asks 'Do you want to save changes' even when the user has not made any changes and only queried data.
    Edited by: Samita on Dec 9, 2009 10:12 AM

  • ME32L Material Group change

    Hello Guys,
    In transaction 'ME32L' - agreement, I can see some line's Mat. Grp were '0000'.
    when I use mm02 change some material's Material Group and come back to see in the ME32L.
    The Mat. Grp have no change.
    Can some guys know what is this probelm? And how can I change agreement Material's 'Material Group'?
    Regards,
    Alex.

    Hello yogesh, sudhansu,
    Thank you for your reply.
    Because I accept SAP just two weeks, so many concept not very clearly..
    At present, I suggest our Purchasing Department delete the old 'agreement' line, and recreate 'agreement' new line for these materials.
    I think these will be help them. @_@
    These days is Christmas holiday and new years holiday, most of SAP specialists were not in the company.
    Just I, only touch SAP two week's newcomers.. Very difficult.
    By the way, thanks again for everyone's help.

  • Reg.Material group changing

    Dear Experts
    We want to change the material group for 50 materials,is it possible to do without going mm02. Pls help
    Thanks in advance

    Hello Raja,
    You can do it using transaction MM17, but, please be aware that :
    If the material is already used in purchasing, when you change the matkl field
    The purchasing statistics show how much of a material group has
    already been ordered. Unitl the change is made, the material is
    managed under the old material group and therefore the old material
    group statistics are updated. From the moment the change is made,
    the new material group's statistics are updated.
    Some purchase orders may derive from contracts with item categories
    referring to material groups. If this is the case, the material
    cannot be used after the change has been made.
    Every purchase requisition is allocated to a release strategy that
    can depend on the material group. A new release strategy may apply
    to a new material group. Purchase requisitions that were created
    before the change are subject to the old strategy; purchase
    requisitions that were created after the change are subject to the
    new strategy.
    Hope this can help
    Regards,
    Mauro

  • Material group Change

    9i,
    I would like to Change Material Group in Material Masterdata through MM02.
    But I have one doubt.Before Changing Material group I am tacking MC.9 Report for Stock statement.For Ecample in old Material group(xxxx) Some Stock is there 100.Like these Group XXXX qty 100.
    Then I am change New Material group YYYY in XXXX Plance.Now i am tacking MC.9 Report For Stock Statement.Now i want new Material group wise Stock only like these group YYYY qty 100.
    These is the My client Requirement.what cani do for these

    mc.9 is standard infostructure and it has got its own update rules to update the infostrcture. It wont be possible to have a retrospective update of the infostructure internal tables, and so if you are trying to analyse it for past periods, results may be wrong.

  • How to trigger Material CIF change pointers when changing Source List

    I need to trigger a Material Change pointer (CIFMAT) creation when the Source List is updated for that material.  In BD52 (ALE configuration) table EORD is not an option for CIFMAT message type, so by standard ALE this can not be done automatically.  I could not find any BAdI/Userexit which will help me to create a material master change pointer so that the Material (Product) will be sent to APO via the CIF when the Source List in R/3 is changed.

    Hi , Can you please check user exit CIFMAT01 function module EXIT_SAPLCMAT_001.You can use this enhancement to influence the logic according to which material data from SAP R/3 is mapped to APO product interface data.
    I suggest to put logic in user exit to check table source list table EORD changes & trigger CIF for material master.You can pull  change data from table CDPOS using EORD table reference & material object value details.
    Based on change record CIF user exist should trigger material CIF run and feed to APO.
    Hope this solution will work in your case.thanks
    Sanjay Karkun

  • PO-Material group change,

    Hi All,
    Client wants to change the "material group" can i do the mass change in MM17 or  does it impact on any of the Open PO's , if its impact how can i change the material group?What are all the possilbe area can be disturbed?

    Try to change material group with MEMASSPO.
    Report taken with ME2C will list  based on new updated material group.

  • Resource Status shows as provisioned even when task is rejected

    Hi,
    We have 5 tasks for resource provisioning. The last task gets rejected but still the Resource Status shows as Provisioned instead of Provisioning.
    In each and every task, I have mapped the response as below:
    C- Provisioned
    R-Provisioning
    Please let me know if I am missing anything.
    Thanks.
    Edited by: user11957197 on 24 Oct, 2012 4:22 AM
    Edited by: user11957197 on 24 Oct, 2012 4:22 AM

    Hi Kalpna,
    Once the the task status in 'Provisioned' status it can't be changed into 'Provisioning' status. It can be either 'Revoked' or Enabled/Disabled.
    Above is product limitation.
    In your case I guess you have set status on 'Create User' task and this task might successfully completed that's why the resource object status is 'Provisioned'.
    Now may you have multiple task after create user. which may fails but as the resource status is in 'Provisioned'. It can't be changed to Provisioning.
    This is right as well. Because the account is created at target system no matter some update fails.
    However, if you want to set status based on last task satus. you can do as suggested above.But, You can ignore if your case match with my understanding.
    --nayan                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • RSPC changes even when SCC4 changes not allowed

    Hello,
    This is about accessing t-code RSPC; we want to be allowed to change Process Chains' configs. We used to have any troubles when changes in client were allowed, but after client was "closed" it started to fail. Below the details:
    SCC4: Client is currently set as:
    Changes and Transports for Client-Specific Objects -> No changes allowed
    Cross-Client Object Changes -> No changes to Repository and cross-client Customizing objs
    Protection: Client COpier and Comparison Tool -> Protection level 0: No restriction
    CATT and eCATT Restrictions -> eCATT and CATT allowed
    BW Workbench-Transport connection/Object changeability:
    RSPC, Process Chain -> Changeable Original
    RSPT, Process Chain Starter -> Changeable Original
    RSPV, Process Variants -> Changeable Original
    The assigned role owns (which as per my knowledge is ok):
    OBJECT    FIELD        LOW
    S_RS_PC   RSPCPART     RUNTIME
    S_RS_PC   RSPCPART     PROTOCOLS
    S_RS_PC   RSPCPART     DEFINITION
    S_RS_PC   RSPCCHAIN    Z*
    S_RS_PC   RSPCAPPLNM   Z*
    S_RS_PC   ACTVT        23
    S_RS_PC   ACTVT        16
    S_RS_PC   ACTVT        3
    However, after accessing RSPC and opening process chain view mode, when trying to change to "change" mode popup window is raised stating:
    Changes to Repository or cross-client Customizing are not permitted
    Choose 'Display object' or 'Cancel'.
    therefore any change can be made.
    Could you please advice? Am I missing something? I hope you can help. Thanks a lot in advance. Best regards,
    Bernardo

    Hi Bernardo,
    in Transport Connection > Object Changeability there is a third option " Everything Changeable" you have to select that option for RSPC related objects.
    Right click on any object type you want to change and chose "Everything changeable"
    this should solve your issue.
    cheers
    #PV

  • Orientation changes, even when locked iOS 7.1.2

    I have my iPad mini locked in portrait view, onthe pull up setting (not the side button). Since the latest iOS update to 7.1.2 it switches to landscape on its own, and I need to reset it constantly.
    Is anyone else experiencing this that can tell me how to fix it?

    There may or may not be iOS 7.1.2. Apple has announced iOS 8 - to be released sometime this fall.
    Barry

  • Order based on material group

    Hello,
    In our current system the system looks on based of the Requisitioner and under which Purchasing Group the Requisitoner is set under PPOMA_BBP where the Purchase Requisition is going.  Then the Purchaser can create a Purchase Order. Under each Purchasing Group is an appointed Purchaser.
    Weu2019d like to change this proces. We want this change based on material group. However, when multiple Purchasing Groups use the same material groups than the system always looks for the top Purchasing Group. This is not the intention. Can this set separately in PPOMA_BBP? Or elsewhere in the system?
    Thanks in advance.
    Best regards,
    Petra de Winter

    Issue resolved

  • Mass Creation of Material Group Purchase info record

    Dear All
    Currently we are developing a custom transaction in SAP to mass upload Purchase Info records from a flat file (excel)
    We are using the standard Function Module ME_POST_INFORECORD to create the PIR s
    We use two different number ranges for Material and Material Group PIR s. This is set up already in SPRO>MM>PIR>Define Number Ranges
    Purchasing info record for stock material (Group - IL ) have a number range X
    Purchasing info record for material group (non-stock mat.)(Grpup -IN) have number range Y
    So when we create a Material PIR manually in SAP it picks X number range and  Y number range for Material Group PIR
    But when we create Material Groups PIR via the new custom transaction it creates PIR s with Number range X.
    Upon checking understood that the standard FM ME_POST_INFORECORD is always defaulting the Number Range Group as IL internally . Seems like a harcoding done by SAP
    Wanted to know
    - Is there any another FM we should consider while creating Material Group PIR s. Any other Function module provided by SAP for that ?
    - Or what can be other way to resolve this ?
    Please let me know your views on this.
    Regards
    Shyam

    Hi,
    For mass upload from flat files you can consider LSMW with different options e.g. IDoc:
    Message Type         INFREC
    Basic Type           INFRECMASS01
    or simply via recording of transaction (this should be using exactly the same NR as you have when doing this manually).
    Regards,
    Tomek

Maybe you are looking for

  • BW:Inventory stock Report issue based on Vendor and PO number

    Dear Guru's. Requirement is to report different inventory  stock's (Total Stock, blocked stock, stock in transit..etc) based on plant, material, storage location, vendor and purchase order in BW. For Example: Plant material Stock in Transit Total Sto

  • Multiple facebook accounts on one device

    recently bought the touchpad and added my facebook profile to it.  Me and my fiance both use the device though.  Was able to add her account as well but can't find any way of actually viewing it.  Is there any fix for this? Post relates to: HP TouchP

  • Pictures on event are not showing but I know they are there, but where?

    I have uploaded picturesfrom camera to imac.  Deleted pictures from camera.  Then see at the event, and it only shows 15 pictures.  I hit on one and kept moving with arrow to the right to see the rest and found that there are a lot more that DO NOT s

  • How can i transform MFC HWND into jpanel or jframe instance

    Hi! I want to open a MFC window, then with the HWND , i want to open java subwindow created inside the MFC window with the HWND, i wonder if there is a way. how can i transform the HWND into jpanel or jframe instance.

  • Flash video dislocates - help!

    Hi. I have a problem using the flash player. When i watch youtube videos, streams or games using flash the image often dislocates. My standard web browser is Opera, but the problem occurs in other browsers too. I have tried to uninstall and install t