Material Group Difference MM03  (Table MARA) and Reservation (Table RESB)

Why material group at T-code MM03 (MARA-MATKL) difference at Table RESB ?
        Table MARA-MATKL = 04
        Table RESB-MATKL = 02
I checking  MM03 not change about material group. I don't know some T-code can change material group link to table RESB.

Dear Mr.Jutamas,
As per to my understanding,initially when the reservation was made for the
particular material ,material group - 02 in Basic Data 1 view  would have been
present or maintained in the material master.
After that a change might have occured,i.e someone must have changed the
material group from 02 to 04.
So in MARA table the value is showing as 04 and in RESB its showing as 04.
Once after creating reservation ,if such changes are made,as far as i know that
will not get updated or reflected in RESB.
Better confirm the same,in MM03 - Display mode of the material and after going
into any one of the view,in the top menu check Environment - Display Changes -
you may get one or a list of changes that were made,along with the user,date &
time details.
<b>If useful reward points</b>
Regards
Mangal

Similar Messages

  • Material Group in the Info Record and PO

    We have the scenario of an info record that is "standard" and "sub-contracting".  When you display the info record for either category using ME13, it has the value for material group in the general data screen.  Technical Assistance tells me this value is found in EINA-MATKL.  However, when I do an extract for the info record from EINA, the field is blank.
    My two info records (standard and sub-contracting) in EINE were created differently.  The standard one was created using ME11 and a plant was entered.  Because a plant was entered, the material group value was not required.  The sub-contracting info record was automatically created when the PO was created (InfoUpdate button is on).  In the PO, the material group was also entered; however, a plant was not added to the info record because we do not have EVO set up to include the plant when the info record is automatically created.  (This is something I can change).
    This is very confusing when we are looking at these info records and it appears data should be there but it is not.  This most noticeably happens with the ones that are getting created automatically and then a different category is created using ME11. Are we are missing some addl requirements in configuration when these records are being created automatically????
    Can someone please explain????  I need to come up with a solution to this problem.

    If you want to enter diff ordre unit than in the PIR
    In this case in the material master purchasing screen you have to activate the var order unit
    enter 2 here
    now go to your info record and on general data screen you will see the field var ordre unit
    here enter 2
    than click on conditon from menu
    system will popup the order unit screen
    here keep cursor on box and click choose
    now it will allow you to maintain the box price also
    once you do this than it will automatically defult in the Po upon selection.

  • Filtering R/3 Material Groups and Material Types

    Hi,
    I am trying to filter the Material groups and material types during master data upload from R/3 to SRM 4.0
    I am tried doing the following:
    1. In Txn R2AR2, i set up the request for DNL_CUST_PROD1 for MARA-MATKL(Material Group) & MARA-MTART(Material Type)and then run the Txn R3AR4 with DNL_CUST_PROD1. The replication was successful, but it pulled in all the R/3 backend material groups and material types.
    Now i deleted the replicated material types and Material groups in SRM using SRM Std reports and this too was successful.
    2. Now i tried another method - In Txn R3AC3, i selected the Object DNL_CUST_PROD1 and i added table MARA and set up the filter requirements for MARA-MTART(Material Types) and MARA-MATKL(Material Groups), i synchronized the filters and then when i selected the object DNL_CUST_PROD1 in Txn R3AS for initial upload, even this is pulling in all the material types and material groups from R/3 without filtering
    Can anyone please let me know the exact procedure to filter out the R/3 Material types and material groups during initial upload of this data into SRM 4.0
    Thanks

    Hi,
      Before starting the INitial load for MATERIAL,for filetr settings ,Go in tcode R3AC1.
      There select the Object name as MATERIAL and click on the "filter settings" tab.
    There in OBJECT FILTER SETTINGS
    Enter the relevant filter criteria:
    e.g. If you wnat to filter on Material type(MARA-MTART):
    The input will be as follows:
    Table /Structure :MARA
    Field :MTART
    OP :EQ Equality (= Low)
    Low: "Material type name"
    Incl/EXcl: Inclusive defined   
    And then click on the button "FILTER SYNC".
    The filter settings are complete for the Material download.
    HTH,
    BR,
    Disha.
    Pls reward points for helpful answers.

  • Material groups, valuation classes and GL acccounts

    HI Gurus,
    I need to setup new material groups with descriptions, valuaiton classess and their related GL accounts. What steps do i nned to follow.
    PLease explain '
    Thanks
    Anusha

    Go to transacition OMSF to define the material group
    Go to transaciotn OMSK to define the valuation class
    here you can define or use existing A/C ategory reference than create valuation calss and assign the A/C category to that valution class and next step you can assign the material type
    G/L account you can define in FS00 transaciotn and you can assign them to the valution class in OBYC transcation.

  • Material group search list

    Hi Expert,
    I have a very simple problem but i cannot find the solution.
    When we go to MM03, we are able to search material code by material description for eg: place your cursor on the material code field, press F4 and enter " jett ", list of description with JETT will come out regardless it is capital or small letter.
    But however, if you search for material group list, for eg: place your cursor on the material group field,press F4 and enter " raff ", it will only list out the material group and description with "raff" . Other material group desc which also contains of raff but with capital letter will not come out. Means it is a case sensitive. Is this standard or we can set it somewhere so that it can ignore case sensitive, just like material code and material description?
    Thanks,
    Crystal

    Hi Crystal,
    The behaviour you are seeing is per standard design.
    For the Material Group, the standard generated search help H_T023
    is used. You may see this in transaction SE12.
    H_T023 browses through table T023 where all the Material groups are
    kept. The Search Help automaiticaly inherits the attributes of the
    fields in it from the Data Dictionary.
    The Material Group Description Example (WGBEZ) which belongs to Domain
    TEXT20, inherits the Case-sensitivty flag from TEXT20 which is set.
    The options which exist are as follows: (None of which are Supported
    by SAP as standard
    - You could change all descriptions for all you material groups to be
      Uppercase. To facilitate this, a small ABAP could be written.
    - You could create your own Search Help for Material Group, using its
      own view, and here specify that you do not want case sensitivity.
    BR
    Nadia Orlandi

  • ABAP report - Check Po items Material group

    Hi All,
    I would like in my abap report to check efficiently each line item in the Purchase order and make sure each line item should have the same material group.
    Any ideas appreciated.
    Meghna

    You can gather all the PO items from the table EKPO into a STANDARD TABLE like the the EKPO. For each line of the table LT_EKPO you will searching into the MARA (MARA-MATNR = EKPO-MATNR) and you will collect the MARA-MATKL into an internal table that will have only one field, the Material Group. At the end you will check how many lines has the internal table. Becouse you wil you the COLLECT instead of APPEND, if the PO has only one Material Group then this table should have only one line.
    Check the following code (it has been written by hard)
    With Regards
    George
    TABLES: MARA, EKPO.
    TYPES: BEGIN OF TY_GROUP,
                     MATKL LIKE MARA-MATKL,
                 END OF TY_GROUP.
    DATA: lt_group TYPE STANDARD TABLE OF TY_GROUP,
                wa_group LIKE LINE OF lt_group.
    DATA: lt_ekpo LIKE EKPO occurs 0,
                wa_ekpo LIKE LINE OF lt_ekpo,
                lines_count TYPE I.
    SELECT * FROM EKPO INTO TABLE lt_ekpo
      WHERE EBELN = p_ebeln.
    SORT lt_ekpo.
    LOOP AT lt_ekpo INTO wa_ekpo.
        CLEAR MARA.
        SELECT SINGLE * FROM MARA
           WHERE MATNR = wa_ekpo-matnr.
        WA_GROUP-MATKL = MARA-MATKL.
       COLLECT wa_group INTO lt_group.
       CLEAR wa_group.
    ENDLOOP.
    DESCRIBE TABLE lt_group LINES lines_count.
    IF lines_count > 1.
    DO SOMETHING.
    ENDIF.

  • Material group updation by using function modules

    Hello All,
    I would like to add , update and delete material group From  database tables T023 and T023T  according to the given Excel input file.Could you please suggest me any function modules are there apart form MATL_GROUP_UPDATE .
    if i am using this function module i am getting the follwing error
    'Class does not exist or is not valid on this date'.
    Could you please send me any sample code.
    Thanks in advance,
    Arvind.

    Hello Narendran,
    Thanks for your quick reply.
    i need to do the following fucntions to the tables t023 and t023t.
    1) adding material group
    2) Updating the material group
    3) Deleting the material group
    according to the status field in the excel input file as shown below
    Status     ungültig     Referenzen     MGS     Beschreibung deutsch     Beschreibung englisch     &#20013;&#25991;     Beschreibung russisch
    N               H4***     Kohlen     Carbon     &#28845;     &#1059;&#1075;&#1086;&#1083;&#1100;
    N               H4100     Kohlebürsten                                                               Carbon brushes     &#28845;&#21047;     &#1059;&#1075;&#1086;&#1083;&#1100;&#1085;&#1099;&#1077; &#1097;&#1077;&#1090;&#1082;&#1080;
    N               H4900     Sonstige Teile aus Kohle, techn. Kohle                                     Other parts made from carbon, techn. carbon     &#30001;&#28845;&#65292;&#24037;&#31243;&#29992;&#28845;&#21046;&#25104;&#30340;&#20854;&#20182;&#38646;&#20214;     &#1055;&#1088;&#1086;&#1095;&#1080;&#1077; &#1074;&#1080;&#1076;&#1099; &#1080;&#1079;&#1076;&#1077;&#1083;&#1080;&#1081; &#1080;&#1079; &#1091;&#1075;&#1083;&#1103;, &#1090;&#1077;&#1093;&#1085;&#1080;&#1095;&#1077;&#1089;&#1082;&#1080;&#1081; &#1091;&#1075;&#1086;&#1083;&#1100;                     
    U               J2100     Polyphenylenether (PPESIB)                                                    Polyphenylene oxide (PPO)     &#32858;&#33519;&#27687;&#21270;&#29289;(&#32858;&#33519;&#25745;&#27687;,&#32858;&#33519;&#25745;&#27687;&#21270;&#29289;)(PPO)     &#1055;&#1086;&#1083;&#1080;&#1092;&#1077;&#1085;&#1080;&#1083;&#1101;&#1092;&#1080;&#1088; (PPESIB)                                              
    D     x          J2400     Sonstige styrolhaltige Polymere                                 Other Polymers Containing Styrene     &#20854;&#20182;&#21547;&#33519;&#20057;&#28911;&#32858;&#21512;&#29289;     &#1055;&#1088;&#1086;&#1095;&#1080;&#1077; &#1074;&#1080;&#1076;&#1099; &#1087;&#1086;&#1083;&#1080;&#1084;&#1077;&#1088;&#1086;&#1074;, &#1089;&#1086;&#1076;&#1077;&#1088;&#1078;&#1072;&#1097;&#1080;&#1077; &#1089;&#1090;&#1080;&#1088;&#1086;&#1083;                  
    Note:Status :N means add the corresponding material group H4***
                               U means update the material group Description in t023t
                               D means delete the material group form  the table t023t
                                in all languages
    Could you please tell me any other fucntion modules are there.
    As per your suggession we can add the material groups then what about Updation and deletion of material groups.
    Also suggest me shall i go for normal modify , delete and update  statements in my program to aceive the above functionality
    2) The excel file format is also not constant they can change the columns
    as per their wish i mean for exp in the above excel  at col1 Status field is there and  at col4 (MGS ) material group and remaining columns are description of the material group in different languages(sorry the excel alignment is not clear above)  .
    They can change this and they can place status at col5 and MGS at col6 .
    Could you please advice me how to handle this situation in my program
    Thanks in advance,
    Arvind.

  • MM-SRV: Adopt Material Group from Service Master instead of default in SPRO

    At my current client we are encountering a problem when creating requisitions for services.  When the system was originally configured years ago, a default value for material group was entered in the IMG under:
    Logistics > Materials Management > External Services Management > Source Determination and Default Values > For Client
    Field is "Default material group at item level" (V_T165-MATKL)
    Up to now this singular default value was fine because they only had one material group for services.  They are now wanting to further stratify their services spend, so there are now several additional values for Material Group that can (and are) used among their service master records.  Having a single default value for Material Group is resulting in incorrect reporting of spend per Material Group.
    I removed the default value in the config node stated above, but now the problem is that when creating a requisition line for services (item category D) in ME51N, no value for Material Group comes in at all, resulting in an error because Material Group is a mandatory field.  Making the field optional on the Field Selection Groups is not a valid solution, as they need Material Group for spend reporting.
    What we really need is for the Material Group to be automatically copied over from the service master data, in the same manner that this takes place for the material group contained in a material master.
    Is this possible?
    Thanks in advance,
    Jason

    Hi,
    Hi,
    1) If service master is used in the PO item, then the system will take the                    
    material group from the service master (AC01). 
    2) If no service master is maintained then the system will take the                 
    material group from the table T023. To be able to change this material group on services level - if you want a different material group on services level, you must set the field ESLL-MATKL for visible in the table control settings, and the change of the service group must be carried out manually.
    Please be advised that it is the standard behaviour that the material               
    group on service level is not updated automatically after you have                  
    changed the material group on purchasing level. The material group on               
    service level must be adjusted manually.                         
    3) By default for service lines the system will consider the material              
    group which is entered at the Item level.                                                                               
    Services can have different material groups, therefore you can change               
    the material group at service level. The material group in service line             
    can be different and always takes higher priority from the material                 
    group at the item level.        
    Regards,
    Edit

  • Material group GUID - related to SRM-CCM

    Hi,
    This is related to CCM.
    Can you please tell me, If the material group description is changed the Guid related to the same material group is changed or not?
    If the GUID is changed with respect to change in material group. Then where can i get the relation of guid to material group
    Thanks

    Hi
    Check table crmd_link
    where we have GUID_HI and GUID_SET
    here there is a relationshhip maintained for header and item level guid link .
    GUId are created when we upload the material groups an material numbers if there is a change in  description of the material number or material group the guiod does not get changed as it an unique id based on the material group number which is a primary key
    Description in general are never a primary key .
    either in back end system or in SRM system.
    regards,
    Nimish sheth
    pls reward points for helpful answers.

  • BEx QUERY - pre filter characteristic values (material group)

    hi gurus
    i have a bex query where the user is asked to enter a material group value, this query is for planning some kind of material groups, so i need to show in the match code for material group (variable screen) just the material groups related to this query.
    For example, material group 0matl_group in rsdmd looks like this:
    M1
    M2
    M3
    M4
    M5
    M6
    M100
    I just wanna show in variable screen the first five material groups so the user can select one of them, i dont wanna show all the 100 material groups
    regards
    joker

    Hi ,
    I am not sure but You can try writing a customer exit code .
    create a interval variable of type customer exit .
    In the customer exit code write the code :
    In I_step = 1
    read the material group master data table in your case or the source from which you get the material group .
    write a code to read the first five records .
    In the low value read the first record.
    and in high value read the fifth record .
    your user should get only the first five materials to input in this case .

  • Assign Source of supply is not working for contract with material group

    Dear Experts,
    I have searched all the threads and gone through before posting my query. So i would ask moderators to go through the thread properly before rejecting this.
    We have value contracts with respect to a particular material group without material and with item category W in the contract item, Please note that for the materials with this material group, the source determination is not set and source list is also not maintained.
    When we create PR for the material with this contract, and when we click on assign source of supply contracts used to get popped up, but recently from few days, when we click on assign source of supply we are getting an error " no source found for this item ".
    Can anybody help on this.
    Regards

    @ Biju,
    As mentioned earlier, we are not creating PR with reference to contract.
    first we are creating contract with item category W (material group), without material and plant details.
    we create PR with or without material with account assignment K and with the material group in the transaction ME51N, and after inputting all the fields, we click on assign source of supply, it was proposing the existing contracts with respect to material group earlier, but it is not happening for particular material group(it is working for all other material groups)
    Hope it is clear.
    @ Dev Patra,
    we are using DIEN-Service material types and we assign that particular material group to only service material type.
    we have not ticked, source list in the material master, we donot have any source list for the materials under that material group.( please check the note 457110- question number 14.)
    Regards

  • Report on Vendor selection according to material group

    Hi gurus,
    I have a requirement from client where the client want a report of the vendors according to material group.
    There is a standard report for this in SAP T.C.---- ME6B. But this report is not working . it is throwing message that no vendor exists for the selection criteria. Material group has been maintained in Material Master record. Vendor master records exists. Please tell me is there any customising that may be required to generate this standard report.
    Thanks N regards,
    Siddhartha

    Hi ,
    Thanks for your mail.T C MC$< wont work for me as the client want vendor no.So I will have to work with ME6B.
    The data in the MATKL (Material Group field )in table EINA is not getting populated , could you please tell me the reason or any customisation required for that as all other field in Table EINA is getting populted.
    Thanks N regaards,
    Siddhartha

  • Report showing vendors for particular material groups

    I am trying to perform an analysis to determine vendors which have procured items for specific material groups.  I have 64 different material groups which represent indirect materials and I want to be able to determine what vendors have been procuring these materials.  I have run transaction ME2C to examine purchasing documents, however there is way too much information and the system cannot generate the list.
    I was curious if there was some aggregate report that I could use in the Logistics Information System.  I know the Purchasing Information System has Standard Analysis for Material Groups, however I have to drill down to each Material Group and change the breakdown by Vendor to get the list and this can be somewhat time consuming considering I will have to do this 64 times.
    Any suggestions would be appreciated.
    Thanks,
    Don

    use transaction MC$<
    execute the selection
    in the report choose from menu settings > characteristics display
    and select either Key or Key and description
    then choose from menu  Material group analysis > Export > transfer to XXL

  • The Diff Between Pre-Order and Reserved

    Pre-Order:
    You walk into the store between the 24th and the 1st of July and walk out with an iPhone 4.
    Reserved:
    You stand in line after all the pre-order people have gotten their iPhones (or if they don't show up, their phone is held for 7 days) and any extra phones are given to you, in a first come, first serve of the people who reserved. You are not guaranteed to get one.
    No Pre-Order or Reserve:
    You get dibs on the phone after all the reserve people have gotten their phone.
    End of story. Please stop asking.

    Sorry, that doesn't make any sense. I mean, I get that a lot of people don't know there's even a difference between "pre-order" and "reserve", but why would "reserve" people have to wait until after all the "pre-order" people get their phones? The Apple store employees know not to give away the pre-order phones, I'm assuming they're pulling from a different "pile".
    And there have been a few people on here who have said that Apple employees assure them there is an actual phone with their name on it. Difference is, their phone isn't programmed to their account yet and the reservation expires at the end of the day (as opposed to pre-ordered phones which expire after 7 days.) Not that the Apple store employees know all, they sure didn't today, but if it's a consistent answer like this, I'm inclined to believe them. Also, then, what's the point in telling the reservation people to come at 7AM if they're not even going to start giving them out then?

  • System not changing the G/L account when material group is changed in Pr

    Hi Experts,
    Issue- System not changing the G/L account when material group is changed in Purchase requistion.
    Process followed:
    1. Create Service Pr with material group 5040 which is assigned to valuation class 3511 and 3511 is assigned to g/l account 51370000
    2. Changed Service PR material group from 5040 to 5050. 5050 is assigned to valuation class 3512 and 3512 is assigned to G/L account 51260000
    The issue is when we changed the material group from 5040 to 5050 system is not picking the g/l account which is assigned to 5050 i.e. 51260000
    instead the g/l remains remains as before which is there for 5040 i.e. 51370000
    Please let me know how can we resolve this problem and pick the correct g/l. Please find the attachments
    Regards
    Badri

    Hello Badari,
    if you are using the item category D "Services", explanation from note  663983 - ME22(N), ME52(N): No new G/L account from material group applies:
    Please consider the following:
    You can maintain the material group both at item level and at service line level. If you subsequently change the material group at item level, the material groups remain unchanged in the services. As a result, the G/L account is not redetermined at service line level.
    In order for the G/L account to be redetermined, you must explicitly change the material group in the service line.
    Kind Regards
    TomT

Maybe you are looking for

  • How to delete contacts from iPhone and update changes to PC after synch?

    I spend a lot of time deleting old/unwanted/duplicated contacts on iPhone. Then I synch with PC through iTunes and I get two options: 1. MERGE or 2. Replace contacts on iPhone with PC information. If I click MERGE then all those contacts I deleted co

  • WRT1900AC External Storage and Windows 8.1

    I just upgraded this router after Time Warner gave me a free upgrade to 200 Mbps. Everything is faster, make that FASTER!!! My new laptop got 206 Mbps on wireless 5.0 GHz. But, the laptop is running Windows 8.1, and I think that is the External Stora

  • T520 with Optimus - Can't install Intel Graphics Driver in XP

    Hello, I have T520 with Optimus FHD screen. I have XP installed in my Ultrabay HDD. I understand that XP doesn't support Optimus and that I must go to BIOS and choose either Discrete or Integrated. OPTION 1 (Discrete Only)  Which someone what works:

  • Acrobat X interface issues (particularly in commenting)

    I have not been very impressed with the interface changes with Acrobat. I don't mind that they have adopted a new accordion style interface so much (Although the do seem to be reinventing the wheel with each release). What I do see as a major issue i

  • How to invert the channel in Logic Pro X ?

    Hello, I had my Logic Pro 9 and invert the channel i just need to select the channel, go to functions and click invert. I bought Logic Pro X a few days ago and i have no idea how to do it, can anybody help me please ?