Material group hierarchy in SAP Retail

Hi Guru's;
I'm looking to load hierarchy of material group in BW.
In the SAP source system the used standard transaction WG21, WG22CLWM for managing retail material group hierarchy.
I suppose that from those transaction there is a BW hierarchy to recover this datas.
I found this datasource 0MATL_GROUP_LKLS_HIER but when i made a test in RSA3 i can't select any hierachy.
Why ? Is there something special for this hierarchy that i need to manage ?
Thanks for Help
Cyril

Please check this answered link:
Re: Material Group Hierarchy
Re: Material Group Hierarchy
Re: Material Group Hierarchy
Edited by: Afshad Irani on Jul 1, 2010 1:03 PM

Similar Messages

Is it possible to create a Material Group Hierarchy in SAP ECC?

Hi,
I'm trying to create a Material Group Hierarchy (not a Product Hierarchy) in SAP ECC.
I've read some discussions about this theme:
MM Material group hierarchy ?
but still I'm sure if it is possible to create a Material Group Hierarchy in SAP ECC or if it is only an IS Retail functionality.
Thanks in advance,
Luis.

Please check this answered link:
Re: Material Group Hierarchy
Re: Material Group Hierarchy
Re: Material Group Hierarchy
Edited by: Afshad Irani on Jul 1, 2010 1:03 PM

Purchase Rebate Process with Vendor - Material Group combination in SAP

Hi Guru's,
I have done with Purchase Rebate Process with Material in SAP by doing following steps,
Created Agreement Type with Material Rebate
Created Rebate Pricing Procedure
Created Schema Group, Vendor
Maintained Purchase Rebate Agreement via MEB1 and created a Purchase Order where I could able to view the Rebate condition type gets determined based on the rebate agreement which has been created for a specific material.
Now from experts I would like to know the Volume based rebate arrangements Purchase Rebate Process with Vendor - Material Group combination in SAP .
If required provide with detail steps explaining what configuration and master data to be in place to complete this process.
Following thread I got it from SCN.SAP forum,
http://scn.sap.com/thread/3663225
Where it has been discussed this type of requirement Purchase Rebate Process with Vendor - Material Group combination would be a GAP.
Kindly throw some ideas on this process to carryout from my end.
Regards,
Kumar.S

Experts,
Please respond if post is not clear then let me know.
Regards,
Kumar.S

Material Group Hierarchy Level 1 - Description

Hi,
We required Material Group Hierarchy Level 1(0RPA_WGH1) DESCRIPTION. we find data source 0MATL_GRP_1_TEXT to
get description. that standard data source created based on table TVM1T. We did find any data in that table. kindly guide me
how to acheive this.
Thanks

hi rajendra,
just check table T023T, hope this will help u.
thanks

Report on Material group hierarchy

Dear All,
As we are runnning the report for material group hierarchy, Material
hierarchy is not appering in any of the standard reports like MB51,MB5B
etc.We need to take the report based on material group hierarchy,
Is there any standard report to fetch the Material group Hierarchy,.
How and what configuration needs to be done for mateiral group hierarchy. Any steps.please let me know.
Kindly guide us on this.
Regards,
Girish
0821-3983076

Hi praveen,
I know Material group in general. But my query is to get report in any standard report , Whether material group hierarchy is there?
Levels of Hierarchy with material group is there?
Thanks & Regards,
Girish

How to create material group hierarchy ?

Hi,
I would like to know how to create material group hierarchy in ECC 6.0
Thanks in advance for your help,
Kind regards,
Yann

Hi ,
The material group hierarchy and product heirarchy is used in SD of ECC 6.0 . These can be created in Logistics General -> Material Master-> settings for Key fields--> Data Relevant to Sales and Distribution-> 1)
define product categories
2)Define material groups
But If you want to make of use of this in SRM ,I won't think it is available . I guess Probably this is avl for CRM .
Regards
Mani
Message was edited by:
Manikanda Ilango S.

Merchandise Hierarchy in SAP Retail?

Hi SAP gurus,
What is Merchandise Hierarchy in SAP Retail System? Please explain me with proper example.
Regds
Ashish Kumar

Hi Ashish,
please look at the sticky thread at the header of this forum.
If there are further questions, let me know.
regards
Björn

Product Group Hierarchy in SAP BI for 0SD_MP03

Hello Guru,
I am working on BI 7.0. I have activated Sales Infocubes, DSO and Multiprovider on BI side. I am working on 0SD_MP03 multiprovider. I have a field called 0PROD_HIER which represents Product Hierarchy which we can see for any material in MM03 t-code. how ever in MM03 t-code we can go upto 3 level (Main Group, Group and Sub group) how ever on BI side we can see only 1 level.
I want to see all 3 levels when i click on 0PROD_HIER because i want to see a relation of a material and it belongs to which main group and group but i see that there is no standard content for Product Hierarchy in SAP BI or ECC . Can any body help me on how to get this hierarchy on BI side ?
Regards,
Komik Shah
Edited by: komik shah on Nov 30, 2010 7:51 AM

Hi Mti,
Thanks for your reply.
I have done 2 scenarios which is mentioned below..
1, I created a hierarchy for 0MATERIAL info object with 0MATERIAL_LPRH_HIER data source. I ran infopackage and it showed a popup "DATA WAS REQUESTED" but when i went to Hierarchy symbol -> Maintain Hierarchies, i am not able to see any hierarchies there.. am i missing something ?
2. I have activated 0PROD_HIER_LPRH_HIER dat sorce ECC. replicated it on BI side and created transfer rules wit 0PROD_HIER infoobject. I created infopackage and it has shown me hierarchy in selection. I ran infopackage and it said that "DATA WAS REQUESTED" but i din't see any hierarchies in RSH1... am i missing something here as well ?
You help is much appeciated in advance.
Regards,
Komik Shah

What is Buisness partner group hierarchy in sap crm

Hi,
what is Buisness partner group hierarchy,what is the importence of this in sap crm
i wanted to know the detailed documentation for Buisness partner group hierarchy
Thanks&Regards
kishore kumar

hi there
what you are saying as Business Partner Group hierarchy is actually the account hierarchy inside the BP which can be created using the Bp groups
here it is what it is and why its important
Account Hierarchies
Use
The account hierarchy allows you to map complex organizational structures of a business partner (for example, buying group, co-operative or chain of retail outlets).
When you create a hierarchy structure, you form groups of business partners (for example, for purchasing groups). You can use them for statistical purposes and for marketing analyses.
You can use the hierarchy for pricing. Pricing is carried out using conditions such as pricing arrangements that are stored at a higher level of an organizational structure and can be transferred to the lower levels.
Integration
You can transfer a customer hierarchy from SAP ECC to the account hierarchy in SAP CRM.
For more information, see Replicating ERP Customer Hierarchies to SAP CRM.
You can also exchange the account hierarchy with CRM Mobile Client.
Features
With the help of business partner groups, you can create hierarchy nodes in order to construct a hierarchy structure. For this purpose, the type of hierarchy is first determined based on the hierarchy category.
Hierarchy structures that are created in CRM Enterprise are sales area-independent.
The condition maintenance for pricing is integrated in the account hierarchy maintenance function.
also see this link
http://help.sap.com/saphelp_crm60/helpdata/en/52/cff837a9aae651e10000009b38f8cf/frameset.htm
will clear all your doubts
best regards
ashish

Realtionship Material Group - Hierarchy

Hi experts,
I am developing an ABAP program that takes de material hierarchy from table KLAH and writes it to a text file. The problem I have is that I could not find the relationship between material group and hierarchy level. This what I've tried so far:
Looking for a table with such relationship - Did not find
Looking for a function module that can give this relationship - Did not find
Use ST05 and the run transaction WGUS - It gave me just tables KLAH, KSSK, MARA but I am not able to find this relationship using these tables..
Any suggestion will be highly appreciated
Thanks in advance,

Hi,
I have used the bapi BAPI_WRF_MATGRP_CHANGE for uploading the material in a retail project,
You can change an existing article hierarchy, delete it, or insert substructures. The functionality applies to the hierarchy, the language-dependent texts, and the articles.
Using the parameter HIERARCHY_DATA, the data for identification of a header record of an article hierarchy is transferred. This data consists of the hierarchy ID and the node. In addition, you have to set the indicator CHANGE for control of the functionality of the BAPI.
Here you can get the required relationship.
Hope this is of your help.
Reagrds,
Yashwin

MM Material group hierarchy ?

Hi,
I was unable to find any material group <u>hierarchy</u> in MM (ECC60).
Is there any functionality to do this ?
My customer do want to have a search function by hierarchy to find the right material group to use in ME51N, ME21N...
Kind regards,
Yann

Hi Srinivas,
Thanks !
Hopefully, this transaction is available in my ECC60 configuration.
I wonder how to link two hierarchy levels ?
Here is my example :
01 Cables
01 Industrial
02 Network
So far, i was not able to create the industrial node under the cables one ....
Kind regards,
Yann
Message was edited by:
Yann Bouillut

Loading Material group hierarchy

Hi all,
Can anybody help me in loading " 0MATL_GROUP_LKLS_HIER" datasource to BI. I am not seeing any stnd transfer rules for the same.How to load this hierarchy ?
Regards
KK

Hi ,
Pls use BW07 & BW10 Tcodes for generating the Hierarchy Data Source in R/3.
If its a set of hierarchy you can use tcode BW07 to generate datasoucre, and for standard hierachies you must be having datasources already created.
Now just replicate datasoucre in BW side, and in infopckage selection you can get newly created hierarchy. Select and schedule it, it will be loaded into BW.
For External Hierarchy in BW , download to Flatfild and then upload.
The useful link:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0403a990-0201-0010-38b3-e1fc442848cb
**PLS assign points,if info is useful***
Regards
CSM Reddy
Message was edited by:
SM REDDY CHEMICALA

How to create material group in material master.

hi guru's
can anybody explain me how to create a new material group in material master.
i wantto add a material group while creating material master MM01..
thanks
sap-mm

Hi,
In this step you create material groups.
You also have the option of using the same transaction to carry out the following activities:
Creating superior hierarchy levels
Assigning the superior hierarchy levels to a material group hierarchy
Assigning the base material group to the material group hierarchy
Assigning characteristics profiles below material group level
Requirements
Your R/3 System is configured as an SAP Retail System.
Activities
1. Create superior hierarchy levels
   You create hierarchy levels using transaction WG01 (creating
   material groups) via menu options MG environment --> Hierarchy
   level --> Create
2. Assign the superior hierarchy levels to a material group hierarchy
   You assign hierarchy levels to a hierarchy using transaction WG01
   (creating material groups) via menu options MG environment -->
   Hierarchy level --> Maint. MG hierarchy
3. Create material groups (base material groups) and then maintain the
   pre-defined materials (reference material/material group material)
4. Assign the base material group to the material group hierarchy
   You assign the material group to the hierarchy using transaction
   WG01 (creating material groups)
5. Assign characteristics profiles below material group level
   You assign characteristics profiles using transaction WG01
   (creating material groups)
Further notes
When creating material groups and then maintaining the pre-defined materials (reference material/material group material) you should be aware of the following.
As these materials can be created automatically using a minimum of data, you should follow this procedure with a check and possibly further maintenance, especially of plant-specific data. The material group reference material should be defined in as much detail as possible so as to keep the workload to a minimum when you have to create more materials for this material group.
All hierarchy allocations involving a material group (base material group) and a higher or lower hierarchy level can be carried out on the initial screen (there is no need to switch to the detail screen). All further hierarchy allocations can be defined top-down when you maintain material group hierarchies.
Only the material groups are transported automatically!
Reward if useful.
Chandru

P&L Report-Account Group Hierarchy -Position of lower nodes above

I define P&L Statement hierarchy in ERP using T Code: KDH2 (account group). The reason why I don't use standard financial statement version is because it can't include cost object /cost element in the hierarchy.
Then I designed a query using Bex Query designer. In row item "account number", I tagged the accoung group as hierarchy and select "position of Lower-level Nodes": above
However, in crystal report, when I recall the database, it is displayed as "higher nodes above." e.g. cost of sales include lower nodes of Material cost and labor cost, it display in Crystal report as:
Cost of Sales                                5000
              Material Cost                        3000
              Labor Cost                           2000
I want it to display as "lower nodes above":
             Material Cost                        3000
             Labor Cost                           2000
Cost of Sales                                5000
I have tried in crystal report desinger- -change group option- sort in original order, in asending, in desending , it doesn't work as "lower node above". (i have to group the account ID)
I don't want to use "sort in specific order" in group option because if it is hard coded, it doesnt faciliate future changes if user changes account group hierarchy in SAP ERP KDH2 (account group).
To sum up, is there anyone can tell me how to show the hierarchy in Crystal Report as "lower node above"?
Regards,
Frances

I find the solution by myselr: just put the account code in crystal report group footer rather than the group header, it will show lower nodes above as
Material cost 2000
Labor cost 3000
Cost of Sales 5000
Edited by: Jixiang Fan on May 14, 2011 12:12 PM

Building Material group extractor

Hello,
My client requires an extractor to generate the material group hierarchy in BW. Since no hierarchy in R3 is maintained, we will be required to build the hierarchy through coding. This we know how to do it. My problem is how to load it to BW. Do i need to create a generic extractor or can we do it through the same extractor as Material group and make use of EXIT_SAPLRSAP_004 to load it or should we load it through file. Also what should be the minimun data that we should provide to built the hierarchy.
Thank you in advance for your answers.

Hi,
Since hierarchy is not maintained in R3,
1. You directly create hierarchy manually for material group in BW.
2. You prepare file and load the hierarchy through file.
for structure of the file you can refer the following link
http://help.sap.com/saphelp_nw04/helpdata/en/fa/e92637c2cbf357e10000009b38f936/content.htm
Cheers

Material group hierarchy in SAP Retail

Similar Messages

Maybe you are looking for