Material group long description
In the item overview section of a PO we're only able to see the short description of a material group when a search is done. However, when we go to the item detail section of the PO and do a search on the material group field there, we get both the short and long description. Is there a way to get both the long and short descriptions when you do a search on any material group field?
Hi Eric;
I'm in version ECC 7 - and both the short/long description are available at the item search by material group in the PO. What version are you on? Have you looked through SAP Notes (p.k.a. OSS Notes) for the patch that may resolve this issue?
Good luck!
Edited by: DeLong Gina on Jan 8, 2008 6:48 PM
Edited by: DeLong Gina on Jan 8, 2008 6:52 PM
Similar Messages
-
Show Material Group Long Description in SRM Product Category ?
Hi,
We have entered Short and Long Decriptions for Material Groups in R/3 and we have run the replication too. We want to show the Long Description of the Product Category to the users on the web screens.
We know there is a setting in SRM to do this but we don't know what it is.
Please let me know if any one has idea.
Thanks
venkatesh pHi Venkatesh,
You can only transfer one of the two descriptions, if you want Long desc, go to
SM30
COMC_HIERARCHY
NEW ENTRIES
SELECT TRANSFER 60 CHAR DESC.
Thanks
Ravi -
Regarding Material group description 2
Hi Experts
In PO Material group 2 description is not visibile. How do I make it visibile.
RegardsI have created a Z-Field on the header of the PO. the field is a check box. when the box is checked the PO should be subjected to release strategy, which is working fine.
But the PO is subjected to release strategy even of the box is not checked.
how to solve this issue.
Many thanks -
Hi Expert,
I have a very simple problem but i cannot find the solution.
When we go to MM03, we are able to search material code by material description for eg: place your cursor on the material code field, press F4 and enter " jett ", list of description with JETT will come out regardless it is capital or small letter.
But however, if you search for material group list, for eg: place your cursor on the material group field,press F4 and enter " raff ", it will only list out the material group and description with "raff" . Other material group desc which also contains of raff but with capital letter will not come out. Means it is a case sensitive. Is this standard or we can set it somewhere so that it can ignore case sensitive, just like material code and material description?
Thanks,
CrystalHi Crystal,
The behaviour you are seeing is per standard design.
For the Material Group, the standard generated search help H_T023
is used. You may see this in transaction SE12.
H_T023 browses through table T023 where all the Material groups are
kept. The Search Help automaiticaly inherits the attributes of the
fields in it from the Data Dictionary.
The Material Group Description Example (WGBEZ) which belongs to Domain
TEXT20, inherits the Case-sensitivty flag from TEXT20 which is set.
The options which exist are as follows: (None of which are Supported
by SAP as standard
- You could change all descriptions for all you material groups to be
Uppercase. To facilitate this, a small ABAP could be written.
- You could create your own Search Help for Material Group, using its
own view, and here specify that you do not want case sensitivity.
BR
Nadia Orlandi -
Material groups, valuation classes and GL acccounts
HI Gurus,
I need to setup new material groups with descriptions, valuaiton classess and their related GL accounts. What steps do i nned to follow.
PLease explain '
Thanks
AnushaGo to transacition OMSF to define the material group
Go to transaciotn OMSK to define the valuation class
here you can define or use existing A/C ategory reference than create valuation calss and assign the A/C category to that valution class and next step you can assign the material type
G/L account you can define in FS00 transaciotn and you can assign them to the valution class in OBYC transcation. -
Want to add new material group plz where I can Add it
Dear experts I want to add material group can you help where I can add it. The material groups are saved in table T0123 . This table is having view also can I enter the value in View or I have to go to SPRO to add new material group. plz help me as I am new. What is the right procedure to add material
Hi Shilpa,
u need to confugure the material group in SPRo
path: sapro>logistic general->setting for key fieds>define material group
T.code:OMSF
here click on new entries add ur 4 character material group with description as per ur requirement.
Regards,
Gopala.S -
Material Group Hierarchy Level 1 - Description
Hi,
We required Material Group Hierarchy Level 1(0RPA_WGH1) DESCRIPTION. we find data source 0MATL_GRP_1_TEXT to
get description. that standard data source created based on table TVM1T. We did find any data in that table. kindly guide me
how to acheive this.
Thankshi rajendra,
just check table T023T, hope this will help u.
thanks -
Looking UserExit or BADI for Material Group Description
Hi,
I am looking for BADI or User Exit for Material Group Description.
My Scenariio is Whenever the user Enter in to MM01or MM02 in Basic Data 1 view Materail Group Field ,the user press F4 It is displaying material group number and corresponding Description.Those Description are in English because that materail group are created in English Longon Language,but the other language User Enter in to MM01 or MM02 Transaction in the basic data 1 view Press the F4 key for Materail Group it showing only material group number no description is displaying,but my requirement it should translate and show it to the corresponding longon language description when Press F4.Regarding this i maintaining other language description for the existing material group in a ZTable.
The table for Material Grop Description in all the language is T023T table.
Get back to me your valuable suggestion for the above requirement.
Thanks & Regards,
sanjeevkumarHi Sanjeev,
If you wanna search for BADIs, you can follow this method:
go to SE80 transaction and select the class/interface CL_EXITHANDLER, then you have to select the Get_Instance method and put a break-point in the following call:
call method cl_exithandler=>get_class_name_by_interface
exporting
instance = instance
importing
class_name = class_name
changing
exit_name = <b>exit_name </b>
exceptions
no_reference = 1
no_interface_reference = 2
no_exit_interface = 3
data_incons_in_exit_managem = 4
class_not_implement_interface = 5
others = 6.
the value of exit_name will give you the name of the BADI that is been call from the transaction. Then you have to execute the transaction MM01 or MM02 and it will stop on each Badi's call.
Regards,
Eric
Reward any helpful answer -
Get material group description
I use V023 to get the material description, in se11, i can check those data dictionary, but i can't join V023 in ABAP, it shown the error message ""V023" is not defined in the ABAP Dictionary as a table, projection view, or database view.". How can i retrieve the material group description. Thanks!
Table name is T023T.
Fields are
SPRAS
MATKL
WGBEZ
WGBEZ60
you need to pass language key too. -
Language specific replication of material group description not working SRM
Hi All,
We have backend R/3 MM system from which we replicate our materials,material groups. For Italian language the replication of the material groups description is not working. Though the description is available in backend R/3 system when i run the DNL_CUST_PROD1object in R3AS tcode, there is no replication log in SMQ2 but still the Italian language is not replicated into SRM.
There are no logs in SMW01 tcode also.
Please suggest.
Best regards,
SamHi,
As david explained,you need to set the filter for the LANGUAGE field in trascn R3AC3 before replicating the product categories.
In R3AC3 select DNL_CUST_PROD1. Go to table structures tab . Click on the filter next to T023T table. This will take you to the filter tab. Select source site name and filter options. In the field put "SPRAS", in op put "EQ" and in low value the value 'IT"(for italian) . You can also describe a range here instead of individual material group numbers.
BR,
Disha.
Do reward points for useful answers. -
Description of material group and material type
hi,
i want to know which are the tables for the description of material group and material type.
Edited by: Alvaro Tejada Galindo on Apr 2, 2008 3:49 PMtable name :MARA
Field name:
Material group:MATKL
for Material description
Table name :MAKT
fieldname:MAKTX
Rewards plz.......... -
Change Description of Material Group
Hi Experts!
I need to change the description of material group 2 and material group 3. How can i do this? I go to spro>logistic general>material group but it seems like not what i want. what is material group 2 and 3? Under material group 2 there are few group code and every code got its own description. i need to change this description.Please tell me step by step.
Thanks.HI,
I got it enter ur description in english & save. Then select the description u have entered, then at the top click on GOTO in that
select translation .The language options will be displayed,There select chinese and enter the chinese description & save. I
am not able do in my system because i do not have the language in my system.If it is not working log with chinese language & try.
murugan
Edited by: Murugan mgl on Jul 30, 2009 6:43 AM
Edited by: Murugan mgl on Jul 30, 2009 6:48 AM -
R3AS Load Objects - Changing Material Group Descriptions
Hello,
We use SAP ECC6 and SRM 5.
We currently have some R/3 Material Groups descriptions that need changing in our ERP system.
I am concerned with doing this as it appears that the material groups are replicated in SRM in the COMM_HEIRARCHY, albeit that they are not actually used in SRM.
The issue I have, is when using R3AS to load the material groups, which load object should I use to just amend descriptions?
It states in our documentation:
DNL_CUST_BASIS3 - BASIS CRM Online. We use this for the initital load, i.e. a new build
DNL_CUST_PROD1 - Product: Categories. We used this one for new product categories
DNL_CUST_PROD0 - Material Number Coversions. I don't know what this is used for
MATERIAL is for R/3 Material Master. I don't know what this is for
Can someone please advise which load object would be relevant to use, and also clarify what DNL_CUST_PROD0 and MATERIAL is used for.
Many Thanks
Lisa PallasHello Lisa,
Customizing object DNL_CUST_BASIS3: for data as Units of Measurement, currency, etc.
Customizing object DNL_CUST_PROD1: to replicate R/3 product categories
Customizing object DNL_CUST_PROD0: linked to customizing ( IMG: SAP Implementation Guide > SAP Supplier Relationship Management > SRM Server > Master Data > Products > Define Output Format and Storage Format of Product IDs
Business object MATERIAL: to replicate R/3 materials
According to your need, you have only to reload customizing object DNL_CUST_PROD1.
Regards.
Laurent. -
External Material Group Description
What is the table / field for getting External Material Group Description
MARA-EXTWG
External Material Group
Key that you can use to assign the material to an external material group or to a material group determined according to external systematics.
Examples
For example, you can store the CCG material group or Nielsen material group here. -
Complete step by step procedure to create new material group.
Hi,
Please suggest procedure to create new material group in R/3 system and assigning it to G/l account.
How to reflect it into EBP ssytem.
Many thanks in advance.Hi,
T. Code: - OMSF
Path: - SPRO >> Logistics u2013 General >> Material Master >> Settings for Key Fields >> Define Material Groups.
Select existing material group and click on Copy As button.
Enter material group code, material group name and long description for material group.
Then click on save button for save material group.
Regards,
Mahesh Wagh
Maybe you are looking for
-
Using J2SE Version 5.0 with Oracle E-Business Suite 11i [ID 304099.1]
Hi hussein, EBS 11i upgrade to Db 11gR2 RHEL 4.6 We are required to upgrade the J2SE to 5.0. The notes said download it from http://java.sun.com/j2se/1.5.0/download.jspBut when I click this site I only see Download Java EE SDK 5.0 Update 1 for Linux
-
Connecting two BI systems to one R/3 system
Hi Experts, We are upgrading our BW 3.x to 7. This activity we are doing on a sandbox server. Now for integration testing we want to connect this BI sandbox to R3 QA system. RFC destination parameters are maintained in both the systems. Now when we g
-
Dears, I have an application which have pages, each page has its content from text, images and external swfs. I load page only if user navigate to it, by the time, more navigation by user occures and more pages loaded. I don't kill ( also I couldn't
-
User License for Cisco CUCM 7.1.3
Hi I need 30 unit license for Cisco Communication Manager 7.1. But I found that it's already end of sale. I want the unit license part number for cisco cucm 7.1.3 version. And i found revised part numbers for user license (CUCM-USR-LIC ) but tho
-
I am wondering how people do restores of very large DB's. Ours is not that large yet bit will grow to the point where exports and imports are not feasible. The data only changes periodically and as it is a web application,cold backups are not really