Material Group Report

Hi All
SD system have material group 1 to 5 (Sales Org View in Material Master).
I want to see report drill down to Material Group.
Could you tell me how to show report in each Material group (quantity, value...).
Thank and Best regards,
Thang

Hi,
This can be possible by configuring SIS (Sales information system) ,t- code mcsi
select a table with material group and active the table and run it in mcsi
The report will with give material group
Thanks

Similar Messages

  • Sales person commission based on sales revenue on material group-report

    Dear Experts,
    My client want to charge and calculate Sales person commission based on sale revenue on material group.
    lets say -sales person 'A' did sales during the month 5lakh on material group1 and 10 lakh material group2 .
    then i will give commission 5% on less than 6 lakh and 10% on more than 9 lakh sales revenue.
    so total commisssion they will book 125000(25000+100000) on GL .
    They want this information from CO so they they can book amount in FI and after that need to charge from COPA based on above logic..
    request you to guide me on the above.
    regards
    RR

    Hi ajay,
    I need Sales revenue ,sales person and material group information.
    will i get all this information from VBAP/VBRP table?.
    I will transfer sales revenue,material group and sales person to copa at the time of billing.
    Shall i use copa or VBAP/VBRP table in order to fetch information and based on information.I will calculate and post FI JV from FI to COPA.
    Guide me.
    regards
    RR

  • Stock report for single material contains different material groups

    Hi Experts,
                  I have a scenario.I want to maintain material group for a material at the time of po creation.In next time i will maintain different material group for the same material.
                   But I want to view the the stocks for material group wise which i entered in po.Is it possible to achieve this?
                  Please suggest solution.
    Thanks & Regards,
    Deepika.

    Please read the KBA document  2012912 - Changeablility of the field "material group" in purchasing documents
    It clearly says that material group can't be changed in case you will use material master in purchase order.
    So, it is clear that you can't use different material group for material master in purchase order.
    For stock report, system will only show you the material group which is assigned to the material master (MARA-MATKL). System will not look into the purchase order section (like EKPO).

  • Report On Receipt Of materials for a material Group

    Dear All,
               I have a requirement. I want the value of goods receipt for a particular material group for a particular period. MB51 does not provide input for material group.
              I have seen other standard reports related to purchase , but all of them considers Purchase Order date as the date of selection. So these reports exclude Goods Receipt of materials which falls on a selection date but whose PO is out of that selection date. Problem with MB5B is that includes cancelled documents as receipt as well and adjusts it with same quantity in Issue column.
              Is there any standard report which will give me  a perfect report or is it possible with query. Please let me know the table names ..
    Regards
    Abhijit

    hiii
    In ME80FN , u 'll ge the material group wise value .
    Thanks
    SAP-MM

  • Report on Vendor selection according to material group

    Hi gurus,
    I have a requirement from client where the client want a report of the vendors according to material group.
    There is a standard report for this in SAP T.C.---- ME6B. But this report is not working . it is throwing message that no vendor exists for the selection criteria. Material group has been maintained in Material Master record. Vendor master records exists. Please tell me is there any customising that may be required to generate this standard report.
    Thanks N regards,
    Siddhartha

    Hi ,
    Thanks for your mail.T C MC$< wont work for me as the client want vendor no.So I will have to work with ME6B.
    The data in the MATKL (Material Group field )in table EINA is not getting populated , could you please tell me the reason or any customisation required for that as all other field in Table EINA is getting populted.
    Thanks N regaards,
    Siddhartha

  • Standard report on 'Ext Material group'

    Is there any standard report available on 'Ext Material group' ? This field is present in Basic Data 1 view of material master.

    Try table: MARA @ SE16 & look for field: EXTWG.
    Thanks,
    Rajoo

  • Report showing vendors for particular material groups

    I am trying to perform an analysis to determine vendors which have procured items for specific material groups.  I have 64 different material groups which represent indirect materials and I want to be able to determine what vendors have been procuring these materials.  I have run transaction ME2C to examine purchasing documents, however there is way too much information and the system cannot generate the list.
    I was curious if there was some aggregate report that I could use in the Logistics Information System.  I know the Purchasing Information System has Standard Analysis for Material Groups, however I have to drill down to each Material Group and change the breakdown by Vendor to get the list and this can be somewhat time consuming considering I will have to do this 64 times.
    Any suggestions would be appreciated.
    Thanks,
    Don

    use transaction MC$<
    execute the selection
    in the report choose from menu settings > characteristics display
    and select either Key or Key and description
    then choose from menu  Material group analysis > Export > transfer to XXL

  • Sales Report Material Group-wise

    I want to generate Sales Report Material Group-wise is there any standard report.
    regards,
    Rajesh

    Hi
    Use the T.code: MCBK, this report tells you about Total stock received, total stock issue for sales order against the material group.
    Reward if it helps
    Regards
    Prasanna R

  • Material Group-wise Sales Report

    I want to generate Sales Report Material Group-wise is there any standard report.
    regards,
    Rajesh

    Hi Vinod,
    MB52 is giving stock of Material on Hand, I want sales report.
    regards
    Rajesh

  • Info Records Per Material Group Standard Report Not Running at All.

    Hi Experts,
    We had a Small problem Where while Running Info Records Per Material Group(T-code ME1W ) Standard Report the Report is not Showing any output in PRD, where else running Info Records Per Material (T-Code ME1M ) Standard Report the Output is getting Displayed.
    Our System is Currently SAP EEC 6.0 & Application Package SAP_APPL is of release 604     & Level 0007, Highest Support Package is SAPKH60407.
    is this Issue covered in Some OSS Note?
    Thanks & Regards
    Priyesh Shah

    Hi,
    The info-records for the materials which appears in the standard report ME1M/ME1L is different from the one which appear in ME1W.
    If you try with the material groups of the ME1L or ME1M info-records it wont be displayed in ME1W.
    ME1W will display only the info-records which are created @ material group level.
    i.e. try to create a new info-record using ME11 without entering material, in the general data screen you have to enter the material group & other parameters.
    Now once you save this info-record,same will appear in ME1W.
    Hope its clear.
    Thanks & Regards,

  • Report sale by material Group

    HI, 
    Can anyone tell me if there are any standard report that I can get sales order by material Groups???

    Dear Ryan
    There is no standard report available based on material group.  But you can generate the same through query <i><b>SQVI and table join MARA</b></i> (for Material Group) and <i><b>VBAK</b></i> (for sales order number) or <i><b>VBRP</b></i> (for sales details).
    Thanks
    G. Lakshmipathi

  • BW report by Material group

    Hello BW Gurus,
    I have a Quarterly report in BW, which i have to review each line and combine the sales for the same product .  The initial report has 4000 products on the report.  After I combine the products, there are 2238.  I would like a way to streamline this process.
    There are list of product that should be grouped as 1 for the purpose of this report. For Example see below
    Material group   Group Name     Material                           Description
    1          Audio                            6003707                           AMS KIT-
    1          Audio                            6500786                           AMS KIT-
    1          Audio                            6500284                           AMS W/O KIT
    1          Audio                            6003437                           AMS W/O KIT-
    Is there are any ways other can creating a hierarchy in BW? I know even if we create a hierarchy based on these material the users has to notify me when items are updated in the material master that affects the groupings..
    Is there a solution for this?
    Appreciate your time and response guys..
    Regards Renny

    Is there a reason you cannot create a navigational attribute for the product group, and use that instead of the material ? We do that in our company. In fact most aggregate material focused reporting uses it, so we've actually added it directly to our data models to avoid navigational attribute performance issues.

  • SAP report to display mat number, quantity on hand, price, material group.

    Hi,
    I wish to have report to display info during month end:
    mat number, quantity on hand, price, material group.
    Please suggest me list of report to retrieve these information. Thanks

    Hi,
    Develop report using tables:
    Material, Material group - MARA
    Price                              - MBEW
    quantity                         - MARC
    sapmmlearner

  • Report related to Material, Material Group, Price of Purchase, Vendor, Qty.

    Hi Gurus,
    Please suggest me a report where we can find material, material group, quantity purchased in a year, at what price, vendor.
    Please revert asap.
    Thank You

    ply design a query through tcode:SQ01. you dont need any help of abaper.
    after tcode you have entered click on "quick viewr"...table join ...downside...
    join 2 tables "ekko" and "ekpo" & "mara"
    ekko you will get vendor..po name and doc type
    as well as in ekpo you will get mat code,desc,po qty & also material group
    hope this helps you
    regards
    amey

  • How to insert Material group field column in MCV1(QMIS: Vendor analysis - insp. lot) report ?

    Hi Experts.
    Our requirement is to get the material group column in the output report of MCV1.
    I have searched the forum but couldn't find any thread regarding the same.
    So please advice whether it is possible or not? and if possible then what is the procedure for it ?
    Thanks,
    Vishal

    You create Formula Columns in Data Model and display fields in Layout Model. Does "a new forum column" have a typo?
    Searching Reports Builder Help on Formula Columns would find a lot info. Fro example,
    To create or edit a formula column:
    1     In the Data Model view, single-click in the tool palette, then:
    n     To create a column within a group, click in the group at the position you want the column placed in the hierarchy.
    n     To create a report-level column, click in an open area of the canvas region.
    2     Double-click the formula column object to display the Property Palette.
    3     Under the Placeholder/Formula node, double click the PL/SQL Formula property value field.
    4     In the PL/SQL Editor, define the PL/SQL for the formula (e.g., SAL * 0.07).

Maybe you are looking for