"Material is configurable" indicator in material master record

Hallo, SAP gurus!
I have a problem:
in my SAP system there is a material whose indicator "material is configurable" is set. Due to this I cannot hold calculations of this material on. How can I clear this indicator(it's grayed and I can't modify it)?
I experimented with BOMs for this material and tried to create several BOMs and I managed as I understand. Probably this could influence setting "material is configurable" flag. Because I could hold calculations on this material before.
Need help!
Thanks!

Hi
firstly unlock the material in mm02--> basic data 1 you have a small lock on top along with additional data and other tabs when you click on that it will unlock and then you can change it also do get in to img - logistic general- material master--field selection--- define lock relevant keys
here go to config management and material lock check the or uncheck the relevant fields
thanks

Similar Messages

Check whether master record conversions exist

Dear All,
I have copied the requests from developement server to quality server for SD IMG configrations.
When i am doing consistency check in Developement server there is no error.
However when i check the same in quality server I am getting the following error.
Check whether master record conversions exist
Dist. channel is missing for condition conversion 1000 10
Dist. channel missing for customer/material conversion 1000 10
Check whether master record conversions exist
Division is missing for condition conversion 1000 10
Division missing for customer conversion 1000 10
Can some body help me to solve this problem.This very urgent and will really appreciate your timely support.
Thanking you,
Best regards,
R.Srinivasan
Check whether master record conversions exist
Division is missing for condition conversion 1000 10
Division missing for customer conversion 1000 10

Experiencing the same problem also.
Right now, i'm re transporting the DEV config for Define Dist Channel, Define Division, Assign Dist channel to sales org, Assign Division to sales org, and Set up sales area. I hope once i transport them again in this order, the issue will be resolved is QAS.
Anyone know what i should do?

ABC Indicator of material master record

Hi,
Please explain about the ABC indicator of material master record, use and in which tab it is found?
Regards,
Ashish

Hi,
I found the answer.
The ABC indicator is in MMC in MRP 1 tab.
ABC Indicator classifies a material as an A, B, or C part according to its consumption value. This classification process is known as the ABC analysis.
The three indicators have the following meanings:
A - important part, high consumption value
B - less important part, medium consumption value
C - relatively unimportant part, low consumption value
Regards,
Ashish

Price Control Indicator in Material Master Record (Accounting View1)

Hi,
Is there any way to make the Standard Price (S) or Moving Average Price (V) automatically SET in Material Master Record? So that everytime we create a material, there will be no need to enter which price we prefer.

Hi,
Go to OMS2. select material type- goto detail- Tick 'Price control Mandatory".
Also if you maintain "ext pro allowed i,e,2" ,system will pick price control V automatically.
For price control S, maintain Int proc allowed as 2.
Regards,
Piyush
Edited by: Piyush Mishra on Jul 20, 2010 9:06 AM

PR, PO, GR for a consumable material without material master record

Hi,
I have created a complete cylcle till Invoice Verification for a material without a material master record.
But i have one query i.e. in the cylce i created i had to create a GR before entering MIRO. Is there any way by which i need not create a GR for a consumable material i.e. to be posted directly to a GL without any inventory management.
In my case, the GR checkbox in the PO was automatically ticked.
Can anyone help on this please.
Regards,
Laxmi

Customizing Error Message in ME23N
When displaying of modifying Purchase Orders with a document type of Framework Order, a user selects the LIMITS tab, they get the error message Customizing incorrectly maintained, message number SE729.
The problem is caused by version upgrades of the SAP software.
Number of entries in table T162V is different to the number of columns in table control for screen SAPLMLSP (400). You can use screen painter SE51 to display the screen. View the Element list for TC_VIEW.
The list of fields can also be viewed within the program. Transaction code ML81N (service entry sheet), program SAPLMLSR. Click on the Configuration button (top right hand corner) select Administrator. This shows the number of fields as 67.
Using SE16N to view table T162V shows 69 fields. This table contains six layouts (variants), they must all be the same. Before the change the total count was 414 (69 x 6).
The ME23N transaction only checks that the number of entries is correct. You will notice that the fields are not in the same sequence, but that should not matter if you donot use the service transaction ML81N and it is not a selectable tab on ME23N.
Transaction SM31 was used to delete the extra fields. As this is a SAP table, you may need extra authorisations to make the change.
Note: the number of fields shown above will be different in each site. This is because of different SAP versions and in what software is loaded.

Product hierarchy in the material master record

Hi,
I am handig Data migration project.
This is related to Product Hirerarchy.
I one business Product Hirerarchy have been configured. But in another buisiness, Product Hirerarchy has not been configured.
There are some common materials using by both business processes.
For coomon mateials if I am maintaining Product Hirerarchy value in the material master record, is there any impact on business which is not being used Product Hirerarchy. Whether it will stop / impact on business processes.
Can you explain plz
Thanks in advance
Regards

Hi karthink,
Thanks for your inputs.
we are meging two servers. In that in one server, product highrechy have been configuredand in another server not configured.
There are some materials with the numbers calling as a common parts exists in both servers.
ex: plat 0001 in one server 1 & plant 0002 in server2
Common part is : m1
plant 0001 not using product hierarchy and plant 0002 not using product hierarchy,.
After golive, all the common parts are being used by both plants and same basic data 1 view.
If we are maintaing product hierarchy in the basic data 1 view, it will flow into sales view as well.
Then what about impact on the plant 0001 business since it is not using product hierarchy.
In the configuration, is there any settings to activate / deactive product hierarchy at sales area level.
Is there any impact on MM / FICO side.
Please explain.
THANKS IN ADVANCE.
Regards
KRK

Material master record: Brands

Hi
There is a field in the material master record where we can fill it with the brand of the material?
There is a field specifically for this information? Maybe we can use Prod./insp.memo in basica data2 view.
Thanks for the help
Regards
Enzo

Thanks for your answer. We are already using Ext. Material Group. The idea is use a field that is only informative and will not have impact in the future operations. Maybe using a field with configuration values brings problems in the future.
What are the information fields are used in this cases?
Define a new Characteristic and Class and assign the class under classification view is another alternative and very prolix but we have to update 50.000 materiales and we dont have the tool to do this activity.
Thanks again.
Enzo

Material master records

Hi,
   i tried to initialize period for material master record and i am getting error * follow the instruction in note 487381 before initialization* .any suggestion would be appriciated thanks
cheers
jothi

Hi
FYI--from sap note
the initialization of a posting period has the following effects concerning the period stocks:
The initialization of the posting period to a previous or to any posting period may lead to the loss of the information of the inventory balances of the previous periods.The book value of the current posting period is taken as the basis also for values of the previous period in this case.
           If you want to continue working with this new posting period, in addition you should execute report Z_DEL_HIST_ENTRIES attached so that history entries greater or equal to the new posting period will be deleted.
If you have to briefly reset the posting period by one period (for example, postings must still be posted in a certain period) just to make a correction (and for a small number of postings), you should initialize the posting period back again to the old value so that the values of the previous period will not be lost (you should forbid postings when carrying out corrections).
           However, afterwards the values of the previous period or the history records (as of Release 4.5) of the materials posted in this case are inaccurate.
           You should NOT execute report Z_DEL_HIST_ENTRIES in this case.
However, if the posting period is generally reset again to a previous posting period and if postings were made during this time, all information on the inventory balance of the previous periods is lost.
           As of Release 4.5a, you should use the cited correction report Z_DEL_HIST_ENTRIES in order to delete history records that are more current than the current posting period.Otherwise, it can result in deviations (inconsistencies) for the update of the history records.
Important! If there are open physical inventory documents that have status 'counted' or for which indicator 'Freeze inventory balance' has been set, you should reject these if they refer to a previous period or have been created in the former previous period.The inventory difference to be posted can be determined from the current book value of the previous period and the book quantity frozen in the physical inventory document (ISEG-BUCHM) and does not match the inventory balance of the previous period that is currently valid.
Reg
Raja

Insert drawing ind te material master record

Hi Gurus,
I would like to add a drawing in the material master record. Do you know which configuration I have to do?
Regards,
MNA

Hi,
You can create/manage your documents in transaction code CV01N / CV02N
Assigning Documents to a Material Master Record .
Access a material master record in Create or Change mode, and select Basic Data.
To create links to documents, choose Additional data -> Document data.
The Link to Documents dialog box appears.
Assign one or more documents to the material.
If you do not know what the document number is, you can search for it using the search help or by choosing Find document.
When assigning a document to a material, you have the following options:
1. Viewing the document by choosing it in the Link to Documents dialog box.
2. Viewing any originals of the document by positioning the cursor on the document and
choosing Display originals in the Link to Documents dialog box.
To return to the Basic Data screen, choose Continue.
Save your data.
Note:
SAP has recommended SAP DMS - Document Management System.SAP DMS are for storing documents such as CAD drawings, Materials pictures etc.With the document management system, users will be able to view the documents with ease within their SAP systems but need to Install the SAP DMS.
Regards,
Biju K

Close period for material Master record error

my current period is 07 2010.
I want to close period 07 2010, and make new posting to period 08 2010.
but when i do the posting, system show error "Posting only possible in periods 2010/07 and 2010/06 in company code C999"
PS: C999 is the company code that contains the plant P999
And when i try to close the current period of material Master record by MMPV, system show below information :
"L O G
Mode: Check and close period
Client: 000
Period entered (month/year): 07 2010
Incorrect period in control rec. of CoCd C999; no conversion The current period (month/year) of the control record is 07 2010
Period closing complete; log issued.
E N D"
and my current OB52 setting is below:
Please help to supply some suggestion.
P999     +               1     2010     12     2010     13     2010     16     2010
P999     A          ZZZZZZZZZZ     1     2010     12     2010     13     2010     16     2010
P999     D          ZZZZZZZZZZ     1     2010     12     2010     13     2010     16     2010
P999     K          ZZZZZZZZZZ     1     2010     12     2010     13     2010     16     2010
P999     M          ZZZZZZZZZZ     1     2000     12     2010     13     2000     16     2010
P999     S          ZZZZZZZZZZ     1     2010     12     2010     13     2010     16     2010
V001     +               1     2000     12     2010     13     2000     16     2010

Hi,
Check in T.code: MMRV and see which period is open for ur Co.Code and back posting is allowed or not. If you are sure to open new period now of new posting to period 08, then
use t.code: MMPV ,
enter
Company code C999
Period to open 08
Fiscal Year 2010
Execute
( system will close the period last period 07 and automatically system open the new one 08)
Now try ur transaction.
if any problem, then check in FI Side:
Use t.code: OB52 and open the 08,2010 period in Account Types A, K, D,M, S and specially Account Type u201C+u201D which stands for valid for all accounts type and save. Better consult FICO consultant for OB52 step.
Regards,
Biju K

How to enter a material on SO without a Material Master Record?

Hi guys,
Pls help me 2 flowing problem:
1. How to enter a material on SO without a Material Master Record? And all case need to enter a material on SO without a Material Master Record.
2. How to use customer material number if there isn't Master Data
Thanks

Hi Friend,
I dont think we can go with a sales order with a material without material master record.
But there are some cases where in we can create a sales order by entering a material which does not have a material master.
1. Through material determination
You can create a material determination for a material (1234) which exists in sap by a material(XYZ) which does not; For example in VB11 you can create a material determination for a material 1234 ( exists in sap) through a material XYZ which does not exists in sap.
While creating the sales order when you enter the material XYZ is not give any error and automatically determine the material 1234 which exists.
2. Text material
We can create a order/quote by directly entering a text in the material description and without entering the material. This the case for text material wherein text item category will be determined.
Please let me know if this help you. Else kindly elaborate the scenario.
Abhishek

Mass Material Master Records Extension

Hi All,
Mass Material Master Records Extension
I have a list of 50 materials.
I want to extend them to new sales areas and plants.
Is there a t-code for mass extension of material master records,
Please advice
thanks in advance
Rgds
Priyanka

The Options are:
1. LSMW
2. SCATT
3. BDC
It is not recommended through MM17 ot MASS.
Abap help can be taken to develop the BDC / LSMW accordingly.
Regards,
Rajesh Banka
Reward suitable points.
How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left. You also get a point yourself for rewarding (one per thread).

Mass update of huge list of Material master records

Hi dudes,
I want to update 1 field for the huge list of material master record, i.e., statistics field in sales org 2 tab.
please help
regards,
madhav

SAP has designed its system to use the standard transaction way to update any fields, no direct table update should be made.
I have seen so many direct table updates in my career, and what do you think why I have get knowledge about that?
Because it was done incorrectly.
There are that many dependcies in SAP, you never really know them all.
People changed (or deleted entries) in one table, but forgot the update in a second dependend table.
You should be a very experience consultant before you may consider direct table updates, and when you became an experience consultant, then you know that you will not do that.

Re: Populating Additional data in Material master record

Hi,
I am creating material master record using BAPI_MATERIAL_SAVE_DATA. I am using the below function modules to populate date in Additional Data Tab. I am getting the existing material details from BAPI_MATERIAL_GET_ALL and passing it to
BAPI_MATERIAL_SAVE_DATA variables. I can create material successfully, but "PROPORTION/PRODUCT UNIT"   TAB in Additional Data Tab is not populating.
Program populates this data for some materials and for some materials not. For example, when I try to create a new material by copying existing details from 1234 , New material will be created   with 12345(say), but "PROPORTION/PRODUCT UNIT"   TAB in Additional Data Tab is not populating.
Now If I put a break point, to find out what could be the issue , and then press f6 , and re-execute program for the same material 1234, then my custom program can populates data. I know its sound wiered, but I am not able to solve the issue.
    CALL FUNCTION 'VBWS_UOM_READ_WITH_MATNR'
      EXPORTING
        i_matnr         = it_mara-matnr
      TABLES
        e_meinh         = gt_meinh
        e_meinh_ws      = gt_meinh_ws
        e_meinh_ws_upd = gt_meinh_ws_upd
        e_meinh_ws_updx = gt_meinh_ws_updx
        e_message       = gt_message
        e_return        = gt_return
      EXCEPTIONS
        error           = 1
        OTHERS          = 2.
    FREE: gt_message, gt_return.
    CLEAR : gt_meinh_ws_upd, gt_meinh_ws_updx.
    CALL FUNCTION 'VBWS_UOM_MAINTAIN_DARK'
      EXPORTING
        i_matnr               = lv_matnr
        i_kzwsm               = it_mara-kzwsm
        i_kzwsmx              = 'X'
        i_exit_by_first_error = 'X'
        i_user                = sy-uname
        i_buffer_refresh      = 'X'
        i_no_update           = ' '
      TABLES
        i_meinh_ws_upd        = gt_meinh_ws_upd[]
        i_meinh_ws_updx       = gt_meinh_ws_updx[]
        e_message             = gt_message
        e_return              = gt_return
      EXCEPTIONS
        error                 = 1
        OTHERS                = 2.
    LOOP AT gt_return WHERE type = 'S'.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    ENDLOOP.
Any suggestions ...

Hi Karthik,
Thanks for your reply. It worked. But now I am facing strange issue. As you see my code above, i am using VBWS_UOM_MAINTAIN_DARK to update Addition data tab. however, the values of internaltable gt_meinh_ws_upd was not updated correctly inside the material master.
For example, I am filling gt_meinh_ws_upd table with the below values
gt_meinh_ws_upd-wsm = 'OZT'
gt_meinh_ws_upd-atnam ' ZABCDE'
gt_meinh_ws_upd-atwrt = 0.0023
append gt_meinh_ws_upd.
but when i see in material master,   gt_meinh_ws_upd-atwrt = 0.0023 is updated with 23, instead of 0.023. I debugged th func. module many times, I didnot come acroos the code what making it to 23.
Any Idea karthik...
Thanks in Advance

Discount in kind indicator in material master

Hi,
where we found discount in kind indicator in material master. what is the functionality of this?
Regards
Rifaie

Hi
Check in purchasing view . MARA-NRFHG. Field name in the screen would be "Qual.f.FreeGoodsDis."
Material qualifies for discount in kind
Specifies whether and for what areas the material qualifies for a discount in kind.
Use
This indicator is presently used only in Purchasing.
Regards
Antony

"Material is configurable" indicator in material master record

Similar Messages

Maybe you are looking for