Material is there in the BOM still no reservation.

Hi ,
I have created planned order. According to planned order material is there in the BOM.
Still no reservation happened.
Can you please tell me what all the possible reasons for this?
Regards,
Amit

Hi Amit,
Planned order is a planning document which will schedule the job, checks the capacity, BOM items stock but it will not create any Reservations for the BOM items.Reservation Number for the BOM items will be generated only after release of production order.
First convert the planned order to production order and then release the production order. Then you can see reservation number in the Production Order. Go to Tcode MB23 and enter the Reservation number which you see in Production Order then system will desplay all reserved Bom items and there stock. If u want to confirm this again go to Tcode MMBE and enter the Bom item number where system will display the reserved stock of that component. Once you make confirmation of the order the stock of the reserved bom items will be reduced.
Ramagiri Srinivas

Similar Messages

  • OCM for Revesion level in the Material Master and for the BOM

    Hello,
    I use My SAP 6.
    I have implemented OCM. It's used for 2 things:
    - The first is for revision level in the Material Master.
    - the second is for the BOM.
    Today, the customizing is good, it's work.
    My need is to have the same change number for those 2 evolutions:  for the material master evolution and for the BOM evolution.
    It's possible, and how?
    Thanks for your answers.
    Bérenger

    I do not think this is possible. Service level is usually used for safety stock planning.

  • After Deleting delivery the Qty still remains reserved

    Once you delete a delivery in sap ,the qty of the delivery item should be transformed into open qty for the future dellviery.But this is not happening  as on sale order in the schedule line in tab it still shows "delivered items like 40" altough the delivery has been deleted.
    The consequences are major as never a delivery of that item can be created as there are no open qtys and that stock cannot be used as well.

    HI,
    Please check for respective Material at Sales: General/Plant tab what is the availability option selected if it is anything other than KP(No check), then system confirms the quantity as soon as the sales order is saved.
    Even though the Delivery has been Deleted, in your case if Quantity is confirmed against that Sales order that Quantity will be available for other SalesOrder and their corresponding Deliveries.
    U can test this my reducing the Quantity of that Line item from that sales order. You will find that Quantity reduced from old sales order will be available for new Sales Order.
    Hope this will solve your Query.
    With Best Regards,
    RB

  • Will the warranty still work in Spain if i buy a macbook air in USA?

    this summer i will go to USA and i want to buy a Macbook air, but i live in Spain. If I buy a macbook air there will the warranty still works in Spain? if I have any problems with it, in Spain will can fix it?
    Thank you

    Yes, Apple offer a Limited Worldwide Warranty:
    http://store.apple.com/Catalog/Images/worldwidewarranty.html

  • If a material reports to two higher level assemblies in the BOM /Is there a

    Hi, 
    If a material reports to two higher level assemblies in the BOM would creates two planned orders for it. Each of the orders has a different date?
    For example
    Z is final assembly
    In that Y is one assembly in that says X1material in level 2
    And the again same material X1 is reporting to Y in levels 5 so here my question is it would create two planned order with different dates?
    And
    Is there any report to see confirmed time to say machine time / labor time or shall we go for report.
    Thx....Srini

    Srini,
    CS15 can be usefull to check the usage of component in assemblies.
    if its used then more then once it can be easily located through this report.
    another concern what you expressed is not clear.
    But what i understand is same component is used at level 2 and level 4 of a BOM.
    assumption from the word levels is , X is used in  level 2 its used directly in BOM of Y and Y have some differnt component G which inturn again have X in it .
    so at both this levels if the dependent requirement is different, you can get 2 differnet orders use individual /collective indicvator for this material as individual .
    If your concern is for BOM position (Item Number) field in BOM then system will create a single plan order even if you set it for individual requirement in material master.here some work around can be possible by maintaining lead time offset IN BOM in item detail screen.
    check and come back
    Hope it helps you
    Regards
    Ritesh

  • Material in two plants, I run MRP with the BOM is not found in prod plant

    Hi all,
    I have plant 1020 material 12345
    Plant 1020 is the production plant for material 12345
    The material 12345 exists in plant 1070.
    The material 12345 in plant 1070 has no MRP.
    Plant 1020 material 12345 config in MM03
    MRP1 --> MRP Type = PD
    MRP1 --> MRP Controller = G03
    MRP3 --> Planning material = PLAN_1020_GR03
    MRP3 --> Planning plant = 1020
    Plant 1070 material 12345 config in MM03
    MRP1 --> MRP Type = P3
    MRP1 --> MRP Controller = 017
    MRP3 --> Planning material = empty
    MRP3 --> Planning plant = empty
    The BOM in cs11 for plant 1020 material 12345
    has 3 components
    Comp#1
    Comp#2
    Comp#3
    The Dependency is code
    TABLE TB_1020_SUPERBOM (PP_nuance_interne = $ROOT.PP_nuance_interne,
    PP_dim_billette_bom = $ROOT.PP_dim_billette_bom,
    PP_CODE_LONG_BILL = $ROOT.PP_CODE_LONG_BILL,
    pp_component_bom =$self.pp_component_bom).
    The dependency is not found because it is looking for it in the plant 1070 and not the plant 1020.
    When the MRP runs for a Delivery type stock transfer order I get
    CONFIG_1020_BILLET <---- This is the BOM item component field in CS11 in the Basic data tab
    Comp#2
    Comp#3
    instead of
    Comp#1
    Comp#2
    Comp#3
    When I run MRP for the same material, if there's no
    "Delivery based on Stock transfert orders" the MRP associates the correct components
    Hope this explains m'I situation.
    Regards!
    Curtis

    Hi,
    If you want a reply in one line, it would be SAP R/3 does not supoort this feature.
    You will have to go for APO module.
    There are few things which can be done in R/3 side, as in maintaining a scope for MRP run in OM0E, maintaining special procurement key etc etc, but all these will not do any check of stock in another plant & can only help in a very limited way if all any for your specific need.
    But SAP R/3 provides a cross plant evaluation via MD48 to know the stock & demands at all plants, this can help only for evaluation purpose.
    Hope it clarifies.
    Regards,
    Vivek

  • Function module to get the BOM details for a material-plant combination

    hi
    Is there any function module to get the BOM details such as
            BOM Usage       -STLAN
            Alternative BOM -STLAL
            Items                -POSNR
            Required Quantity-EMENG
            Resulting Quantity-MENGE
            Unit of measure    -BMEIN
            Base unit of measure-MEINS
    for a given material-plant combination
    if so please suggest me some FMs.................
    Awaiting for ur reply..............

    try the below fm it may be useful for you
    DATA : BEGIN OF I_BOM OCCURS 0.
            INCLUDE STRUCTURE STPOX.
    DATA : END OF I_BOM.
    CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
        EXPORTING
          CAPID                 = 'PP01'
          DATUV                 = SY-DATUM
          MEHRS                 = 'X'
          MTNRV                 = P_MATNR
          WERKS                 = P_WERKS
        TABLES
          STB                   = I_BOM
        EXCEPTIONS
          ALT_NOT_FOUND         = 1
          CALL_INVALID          = 2
          MATERIAL_NOT_FOUND    = 3
          MISSING_AUTHORIZATION = 4
          NO_BOM_FOUND          = 5
          NO_PLANT_DATA         = 6
          NO_SUITABLE_BOM_FOUND = 7
          CONVERSION_ERROR      = 8
          OTHERS                = 9.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    just befor use it check your application area.for my case it is PP01. you can find it in CS12 when you are exploding the bom the value you are giving in BOM application that is the value for CAPID.
    Just go to se37 and checkout the fm it has lot of options here I am using the minimum things.
    regards
    shiba dutta

  • Tuning the BOM of a new material

    Hi experts,
    When a new material will be launched,  what is the best way to tune its BOM
    1) Can we create a BOM with a USAGE different to 1 = Production?
    2) Does this new BOM can be used in a routing?
    3) Can we create a planned order without a previous BOM and we can assign the components when we are creating the planned order?
    4) Can we create a production order without a previous BOM and we can assign the components when we are creating the production order?
    At the end when the BOM is all right then we create a BOM with USAGE 1 = Production
    Best regards,
    Arnulfo Cordero Pradel

    Hi Arnuflo,
    Let me answer your questions one by one:
    1) Can we create a BOM with a USAGE different to 1 = Production?
    Yes, if you intend to use that BOM for production. If you have engineers working on your BOM, then, alternatively, you can also create and engineering BOM which later copied into production BOM.
    2) Does this new BOM can be used in a routing?
    BOM isn't necessarily used in routing. But its components can be allocated/assigned to operations in the routing. By default, all BOM components are allocated to the first operation.
    3) Can we create a planned order without a previous BOM and we can assign the components when we are creating the planned order?
    Yes, you can. But if you create the planned order through MRP, there will be exception message. You can assigned the BOM later.
    4) Can we create a production order without a previous BOM and we can assign the components when we are creating the production order?
    Yes, you can. You can even add components directly to the production order without assigning any BOM.
    Regards,
    Julian

  • No specification is assigned to the material in the BOM item

    hello
    when I want to create or modify certains BOM (cs02), i have this error message.
    It is a warning, but nothing is done in the BOM.
    Where does this error come from ?
    And how to solve it ?
    Thans

    see below the error message :
    Item material 421Z2811-2001 is not assigned to a specification
        Message no. CM_BOMBOS052
    Diagnosis
        No specification is assigned to the material in the BOM item
        00125813-0240.
    System Response
        The system cannot create a composition for the bill of material since
        there is no material-specification assignment.
    Procedure
        Ensure that the items in the bill of material are assigned to one
        specification in each case before the composition is generated.
        Otherwise errors occur during generation and you have to repeat the
        process.
    I Don't know, what is a spécification in a BOM ? Never we have used a "spécification"
    @+

  • My little cousin scratched my i tunes gift card with a key and now I am not able to decipher the entire code. Is there any way of still being able to redeem my i tunes gift card?

    My little cousin scratched my i tunes gift card with a key and now I am not able to decipher the code on the back. Is there any way of still being able to redeem the gift card?

    This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
    Answering quickly, though, see:
    http://support.apple.com/kb/TS1292
    Regards.

  • I have like five GB's of ghost data (data the device claims is not there but it is still taking up space) on my I pad 2 from a failed movie download attempt. How do I fix that with out resting my iPad? I have only 1GB left of storage

    I have like five GB's of ghost data (data the device claims is not there but it is still taking up space) on my I pad 2 from a failed movie download attempt. How do I fix that with out resting my iPad? I have only 1GB left of storage
    The movie had gotten to the point that I could watch it all the way through but it still said processing and got stuck at that point and when I turned off the wifi to try to restart it, it deleted its-self but did not free up any of the storage It was taking up
    Restarting my iPad does not help
    Some thing similar also happened to my old laptop when trying to download the iOS 5 update to my laptop when it came out. It kept getting disconnected and every time it would try to start over and act like what had already been downloaded was not there though it was still taking up the storage space.
    And it continued repeating until it took up all of my storage space. The data file would not show up anywhere so I had to restore my laptop to the factory settings and that worked for awhile but I eventually had to get a new laptop.

    Did you try to set it up as new device, as explained in this article?
    How to erase your iOS device and then set it up as a new device or restore it from backups
    If this does not work, use iTunes to set it back to factory settings, which would also install the latest software:
    Use iTunes to restore your iOS device to factory settings - Apple Support

  • Hi. Downloaded iphone 6.0 and my video playlists in "Music" are now gone, but their names are still there. The videos are still in "Videos" and play from there 1 at a time manually.

    Hi. Downloaded iphone 6.0 and my video playlists in "Music" are now gone, but their names are still there. The videos are still in "Videos" and play from there 1 at a time manually.  It gets weirder:
    When looking at the empty screen with the name of my former playlist on top,  if I tap the edit button on the phone, tap the + button to add a 'song' to the playlist, and then tap 'Done' without adding anything, I can see all my videos in the playlist with the red minus symbol next to each of them. But as soon as I tap 'Done' again they all disappear!
    I saw on another forum that someone has had the same problem but fixed it by, and I quote
    "If you go to Get Info and change the Media Kind from Movie to Music Video under the Options tab, they all now appear in the playlists!"
    I'm happy this worked for him, but when I tap "File" in itunes, the "Get info" field is greyed out, so I can't test the solution proposed.
    Any ideas?
    Thanks

    Same problem on my ipad 2...but it works well on my iphone 4s.
    Can somebody help me?
    Thank you

  • I have read up on all about crashes and i cant even open it in safe mode :( i have tried deleting it and reinstalling it but the problem still persists. What would you suggest i do and is there any way i canget hold of firefox 6 for mac?

    i have read up on all about crashes and i cant even open it in safe mode :( i have tried deleting it and reinstalling it but the problem still persists. What would you suggest i do and is there any way i canget hold of firefox 6 for mac?

    Does the regular Firefox 8 release version work or does the version crash as well?
    *Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • I am running Mac OS X Lion on a brand new Mini.  Every now and then, my keyboard goes "dead."  The mouse still works but can't type.  If I restart, everything is fine again.  Is there anything that will fix this problem?

    I am running Mac OS X Lion on a brand new Mini.  Every now and then, my keyboard goes "dead."  The mouse still works but I can't type.  If I restart, everything is fine again.  Is there anything that will fix this problem?
    Also, I am trying to connect my Mini from the mini-Displayport to the Displayport of my Dell U2410 monitor.  The image is very grainy,even though it is set to the correct resolution: 1920 X 1200 at 60Hz.  If I use HDMI to VGA input, the image is much clearer.  Is there a way to get the Displayport to work?

    I'm having exactly the same keyboard issue.  Certainly nothing has ever enhanced my concentration while coding like suddenly becoming unable to type.
    I'm seeing a great many devicemgr and rake errors in my system log.  I don't know if they're related.  How 'bout you?
    If you're unfamiliar with the system log…
    Open /Applications/Utilities/Console.
    If necessary, choose View > Show Log List.
    system.log is at the top of the FILES section.
    Try searching it for hot words like DEBUG, FATAL, and aborted.
    I've found some discussions that would tend to indicate my errors are postGres related – I'm running OS X server.
    -Bryan

  • Purchase order form display the BOM of the item material

    Dear :
      When i print or preview the purchase order in ME23n,I want to display all of the  components of  material which every item used.(sap standard output type is NEU,form is MEDRUCK)
      The components can be displayed when we click the button of "Components" in the right "Material Data" ITem Tcode:ME23N.
      Firstly ,i have to get the BOM of the material through the function:CS_BOM_EXPL_MAT_V2.But NOW,i found that ,In ME22N ,the operator would change the components and saved the order,
       so, my way to display the component in the print form is wrong!:(
       anyone give me some advice?
       Thanks.

    Shao,
    I guess you will have to design your SMART Form according to your requirments and configure this SMART Form to be called from the output conditions of the PO.
    In this SMART Form, you will have to include the logic of exploding the BOM and showing the components as well.
    I don't its a standard functionality.
    Regards,
    Ravi
    Note : Please reward the helpful posts.

Maybe you are looking for