Material Issue to Order

Hi Experts,
Question related to Make to order (MTO)
I was created one sales order successfully.
Then I run MRP and i got Planned sales order.
After that I converted that planned sales order as process order.
When i click on release icon, my proble arised.
that is Released rejected.
I checked the stock availability in MMBE/MB52, there I found lot of stock.
But in the Process order message is comming that missing parts list.
Can any body give me solution for how to release the process order.
by
M.Anand (Hyderabad)

Hi,
The missing parts list has to be completed first, check the BOM and also the missing parts and the material availability for these missing parts, once if stock is available for all the components, then the order can be released.
The release here could be configured alternatively, like
1. release the order even if there are missing parts
2. release the order only if all the parts are available
I believe your PP config settings for order release is the second case.
Check with your PP consultant also for more ideas.
Cheers,
Rajan.

Similar Messages

Material issue without order/ project

dear all,
i need one advise from your side :
we purchase some materials from outside, assemble it and sell it to customer. but we dont want to create production order for that is it any certain process in SAP so that when we do the assembly and gr for parent material will done at the same time child material will automatically issue from stores.

we usually buy some kit material from vendor. we assemble it in our factory and sell to customer. as per std, sap process. we have to create bom and production order for parent material and material will issue against assembly operation in operation sequence of order. but this KIT materials having many of material codes which are difficult to maintain in bom and process. so my request is to bypass order system ,

Different exchange rate on each material issued for order

Hi all,
I have strange situation like this. Controlling area currency is USD and object/company code currency is THB. When i do Good Issue for production order, system use different exchange rate for each material although all of these material are posted on the same posting date for good issue.
Example :
I do Good issue material A and material B for production order 100000 at posting date 01.03.2008. When i look into cost analysis and look for USD currency, i found that exchange rate for material A is 30 THB/USD and exchange rate for material B is 25 THB/USD. FYI i use exchange rate type m. How can this happen?? How can each material have different exchange rate although its transaction at the same posting date??
I'm waiting your advice.. Maximum point will be given.
Best regard,
Yudha

I think its a bit misleading...The requirement is to post an Invoice with a base taxable amount of Exchange Rate A and a tax amount of Exchange Rate B. The Base Currency is JPY and the System Currency is SGD. So the Report S_ALR_87012357 should see the amount in SGD there. The Issue is caused by the different exchange rate on the tax amount submitted by the Vendor Invoice.
Example: Vendor Invoice Amount: 926,413.00 JPY, then we created PO to Invoice with Base Currency JPYalso amounted 926,413.00 JPY. However, in the Vendor Invoice Amount, the Tax Chargeable is 923.00 SGD (based on their exchange rate 65.66 JPY per SGD). But our Exchange Rate (System Rate) is 63.49 JPY per SGD. How can we reflect the Tax Amount as 65.66 JPY but still the correct SGD amount is based on the Vendor Original Invoice Exchange Rate 65.66 and not the System Exchange Rate, 63.49 in the same Invoice Creation (MIRO)?

Report for Material Issued against Service Orders But not Billed.

Hi Experts,
For CRM Service Orders Based on the Reservation number generated in CRM we will make the Goods issue document in ECC.
My Question In CRM Do we have any standard report to see Material issued against CRM Service orders but not billed. i.e. Work in progress.
Thanks in Advance,
Abhinesh

Hi Vivek,
What I wanted to say that you won't get information from VAV about billing since as far as I know it doesn't contain any relevant table.
You should try create a query using LIKP-LIPS-(joint type: left outer)-VBRK. This will connect deliveries to billing document, you can also get SO number. Please try this.
(Sorrowully I don't know which logical database would be good for you)
BR
Csaba

How to block material issuing after sales order invoiced?

As the subject mentioned, could be a possible to block material issuing since sales order invoiced, or
in the another words, after the sales order completed?
Or could be a possible to set sales order as closed, and then material issuing related with this sales order are
forbidden?
Thanks in advanced,
Zhou Zhen

Dear Friend
A sales order is created say order no 10000 and for material X say 10 units this order is delivered and PGIed and invoiced and the payment too has come
That means the order 10000 is closed
Case 1
Now an user goes to VA02 t code and put this order no 10000 and changes the material X qty from 10 to 12 and opens up the whole order once again
This can be controlled by using t code OVAH choosing message class the V4 message no 083 and change from warning to error
Case2
But to avoid the user to add material Y to the existing order say 10000 then i think we have to go for user exit
Because the system doesnot even throw a warning message too in case 2 (according to my knowledge) and allows another line item to be added in the same order
But you can test it if it throws any warning message we can try to convert that error
But in case 2 it is not happening(even warning is not there)
Regards
Raja

Excess Issue of Material against Production Order

Hi
For Goods Issue of Material against Production order , i want the system to control excess issue of material against Production order. How can it be controlled.
Regards
Madhesh Kumar

Hi Madhesh,
there are many loop holes to issue excess stock against production order
so better you use user exit so that when ever any material issued against production order and it is in excess then throw error
Thanks
Bala

Error while issue material against production order

Hi,
In our development server recently we have created on ecompnay code and plant by copying the one existing company code and plant, now for this new plant I have created new profit center with KE51 and after that I have create done cost ceneter in that this new profit center is assign now while goods movment with MB1A with movmen type 201, 202 it works OK system is not giving any error but while issue the material against production order in MB1A with movement type 261 system is giving error message
No postings can be made to profit center DUMMYBAOPC in company code MT50
Message no. KM183
Diagnosis
Profit center DUMMYBAOPC cannot receive postings in company code MT50.
this profit center DUMMYBAOPC we use in old compnay code and for this new company code is not activated for new we have new profit center then it is linking to that what can be the solution.
regards,
zafar

Hi,
After asigning new profit center in the Production order problem solve.
regards,
zafar

Work order material issue request error

In Oracle EAM Maintenance super user responsibility i am getting following error while trying to request material issue
" Picking rule fails to find a source locator that meets the rules restrictions "
what went wrong? could any one explain

963731 wrote:
In Oracle EAM Maintenance super user responsibility i am getting following error while trying to request material issue
" Picking rule fails to find a source locator that meets the rules restrictions "
what went wrong? could any one explainPlease see these docs.
WMS Short Pick Is Not Working With Tasks Having an Allocated LPN get ORA-01086 save point Error [ID 1097883.1]
Rules Engine Does Not Allocate Move Orders From Non - Reservable Subinventory [ID 338458.1]
Receive Error |WMS_MULT_LPN_ERROR|WMS_START_WORKFLOW_FAILED|Invalid cycle count header specified On Curtail Pick Exception [ID 1101114.1]
Thnaks,
Hussein

How to block material issue to work order

Dear Expert,
How do block material issue to work order when the item have been flag for deletion in MM module and have also been block for procurement and inventory in mm module.
Please help

Hi,
Thank you for the prompt reply, what you mean by the Standard SAP? can you provide the reference link? I am facing the problem that the item material have been flag for deletion and been block for procurement and inventory in MM module material master data however it still able to material issue to work order. Any ideal how to block the material issue to work order when the material item have been flag for deletion and block for movement in MM material.
Please help.

Restricted issue material in "work order"

Hi All
How to restrict the material at the time of the process of issue material in work order?
we need to restrictive to Not to be wasteful.
any can help my problem?
thankyu..
The pooh

Hi PS
Sorry if my question make you confused. but actually im need to have a system that we can restricted issue material.
In our company have the rule that we can only take some part consumable.
for example :
in one month, we can only take the part just 100 pc. we not allowed to take the part more than 100 pc.
so we must restrict that.
Best Regards,
the pooh

Maintenance Order - disallowing deleting reservation after material issue

Dear ALL,
How to resrict deletion of reservation in maintenance order after material issue done partially / completely.
Currently system is allowing to delete the reservation in maintenance order.
Please guide.
Regards,
Prashant Salvi

Hi,
In Tcode O04C for Version 00000000 , Application Area CN , Msg No : 750 , mention as Error message ..
If the above does not work then use user exit CNEX0039 : Check Whether Component can be Deleted
regrds
pushpa

Revaluate material issues in Production order WIP

hello All
We are long cycle time industry and Business would like to revaluate the material issues in the WIP if there are any changes in the standard cost of the issued material.
Is it possible w/o ML implementation?
regards
mahesh

OK. Our requirement is only quarterly revaluation of inventory and WIP as per FIFO.
I am not much familiar to ML so not sure if it can be used only for a limited purpose as above.
Any information on ML implementation is appreciated.
Thanks
mahesh

Line item issue in order confirmation

Hi folks..!!!
i have an issue regarding order confirmation. while i am trying to display a sale order that line item quantity and somo more data's are printing in second line. i need those data's has to be print in same line in line i.e item , material and material description displaying row...
while in layout they done for item, material , material desc are in one TEXT element i.e ITEM_LINE and Quantity and some more fields are in other TEXT element i.e ITEM_LINE_PRICE_QUANTITY, i think becoz of this quantity is display in second line.. could you plz solve this issue..
ITEM     MATERIAL     QTY      DESCRIPTION   PRICE....
10           ABC                           DEMO
                                10PC                                 2113
i need output like this...
ITEM     MATERIAL     QTY      DESCRIPTION   PRICE....
10           ABC             10PC          DEMO         2133

hi ,
u r using script or form ?
if u r using script ...
in tag column put "=" ... so it will cont with the prev line...
in case u r using smartforms ... keep all the values in single text element ...
is there any problem in putting them in single column ?

Goods(Material) issue to production

Hi All,
While issuing materials against production orders, my client has specific requirement to issue material from a specific supplier only to production. Stocks are lying at plant from various sources(suppliers). We have stocks with split valuation with different sources of supply on the single material code.
How can it be restricted to any one of the supplier(source of supply).?
Within a storage location, I have the stocks seperately identified supplier wise as "IMPORTED" & "DOMESTIC".
While issue of goods can't i issue only material in "IMPORTED" stock and lock the material issue of "DOMESTIC" stock.
In split valuation, during each material movement the system prompts to select the valuation type.
In this case either "Domestic " or "Imported". So can i somehow block the prompting of any one of the valuation type?(say domestic)..
Durga.

Hi,
You can restrict the goods movement by applying STOCK DETERMINATION RULE for your material as you have the option of selecting a valuation type and restricting it from issuing the material.
Please read the documentation and if you want a detailed setting on how to customize revert back..
https://forums.sdn.sap.com/click.jspa?searchID=18444194&messageID=5740972
Regards,
Deepak.

Sub-Contracting material Issued to Vendor and balance to be Issud

Hi,
Sub-Contracting material Issued to Vendor and balance to be issued against the Sub-contracting Purchase Order.
Please suggest T.Code for the same. (Same Like ME2O, but PO number should be an input parameter)
For example I have Created PO with header Material for 1 quantity which having one child item and qty say 20 numbers, and issued child material to vendor 10 numbers (541) and balance is to be issued to vendor is 10 numbers, now I want a report which gives PO number, Header item with qty, total requirement of qty for the child item with line item number, issued child item with qty and balance to be issued child item with qty.
Thanks
Ramesh.G

Report MB51 is there. Here you have to input your Purchase order number and execute but, it will show only material issued to subcontractor through 541. It will not show the balance quantities.
And there is no such standard report which will show information how much issued to subcontractor and how much is balance based on Purchase order.
You can develop a z report with the help of abaper.

Material Issue to Order

Similar Messages

Maybe you are looking for