Material Issue to Prod Line

Hi Friends,
Here we have received the prod Order # from from prod team where as i unable to transfer the same to Prod Line by MIGO against Order with Mvt 311.
It is taking in Mvt by 261 where as i don't want make Mvt 261. Here just I  want to tranfer by system with Movt to one storage loc to another storage location.
I don't want transfer by Manual entry by Movt 311 It is geeting late as there is lot of line items in the prod order.
Please advice me
Regards
Lakshman.

Goods movement type 311 is for transferring between storage locations, goods movement type 261 is for issuing to a production order... two total separate requirements.
You are probably looking at 2 steps,
311 to move from one storage location to the "production issue" storage location
261 to issue to the production order
If you do not want to do the 311 manually then you need to set-up some transfer process via MRP to move stock between the storage locations.  You could use MRP areas or Storage location MRP indicator in the material master MRP4 view.

Similar Messages

  • Material return to vendor ( line rejection)

    Dear MM gurus,
    i have a scenario where material received is accepted at the time of Quality inspection. Same material issued to production but if found faulty has to be returned to vendor. Such line rejection occur daily and at the end of the weak rejection quantity are enough to be sent back to vendor.
    we are using two step process for GR i.e 103 followed by 105. following process does not allow material return through purchase return order i.e 161. creating return delivery via migo with movement type 122 against GRs is not viable as such returns will need reference to around 30 goods receipt for single return delivery creation.
    kindly suggest a solution were return delivery can be created  without reference of GR. Please ask for clarification if information here is insufficient.
    regards
    Avinash

    Hi Avinash,
    Please check the link
    http://help.sap.com/saphelp_470/helpdata/en/a5/63351643a211d189410000e829fbbd/frameset.htm
    Regards,
    Bijoy Kumar

  • How to block material issuing after sales order invoiced?

    As the subject mentioned,  could be a possible to block material issuing since sales order invoiced, or
    in the another words, after the sales order completed?
    Or could be a possible to set sales order as closed, and then material issuing related with this sales order are
    forbidden?
    Thanks in advanced,
    Zhou Zhen

    Dear Friend
    A sales order is created say order no 10000 and for material X say 10 units this order is delivered and PGIed and invoiced and the payment too has come
    That means the order 10000 is closed
    Case 1
    Now an user goes to VA02 t code and put this order no 10000 and changes the material X qty from 10 to 12 and opens up the whole order once again
    This can be controlled by using t code OVAH choosing message class the V4 message no 083 and change from warning to error
    Case2
    But to avoid the user to add material Y to the existing order say 10000 then i think we have to go for user exit
    Because the system doesnot even throw a warning message too in case 2 (according to my knowledge) and allows another line item to be added in the same order
    But you can test it if it throws any warning message we can try to convert that error
    But in case 2 it is not happening(even warning is not there)
    Regards
    Raja

  • Sub-Contracting material Issued to Vendor and balance to be Issud

    Hi,
    Sub-Contracting material Issued to Vendor and balance to be issued against the Sub-contracting Purchase Order.
    Please suggest T.Code for the same.  (Same Like ME2O, but PO number should be an input parameter)
    For example I have Created PO with header Material for 1 quantity which having one child item and qty say 20 numbers, and issued child material to vendor 10 numbers (541) and balance is to be issued to vendor is 10 numbers, now I want a report which gives PO number, Header item with qty, total requirement of qty for the child item with line item number, issued child item with qty and balance to be issued child item with qty.
    Thanks
    Ramesh.G

    Report MB51 is there. Here you have to input your Purchase order number and execute but, it will show only material issued to subcontractor through 541. It will not show the balance quantities.
    And there is no such standard report which will show information how much issued to subcontractor and how much is balance based on Purchase order.
    You can develop a z report with the help of abaper.

  • Customer adopted parts to be issued in production line

    Dear Experts,
    I need some help for this scenario. Customer will provide a part to assemble in the main production line. Business will have to mainatain that material & issue to production order. How to handle this. Like is there any movement type from SD for handling customer adopted parts. Please suggest.

    Check this thread
    [Re: how to manage customer supplied materials in SAP   |Re: how to manage customer supplied materials in SAP;
    thanks
    G. Lakshmipathi

  • Report for Material Issued against Service Orders But not Billed.

    Hi Experts,
    For CRM Service Orders Based on the Reservation number generated in CRM we will make the Goods issue document in ECC.
    My Question In CRM Do we have any standard report to see Material issued against CRM Service orders but not billed. i.e. Work in progress.
    Thanks in Advance,
    Abhinesh

    Hi Vivek,
    What I wanted to say that you won't get information from VAV about billing since as far as I know it doesn't contain any relevant table.
    You should try create a query using LIKP-LIPS-(joint type: left outer)-VBRK. This will connect deliveries to billing document, you can also get SO number. Please try this.
    (Sorrowully I don't know which logical database would be good for you)
    BR
    Csaba

  • Standard report for - Daily Store Material Issue

    Hi All,
    Can any one let me know which standard report gives me the details for "DAILY STORES MATERIAL ISSUE" in Oracle Inventory.
    Thanks
    Sunil

    You can try the "Transaction Register" report and narrow it by transaction type and subinventory.
    Hope this helps,
    Sandeep Gandhi

  • PO number and material issued against this PO for subcontracting

    How to know the link in between the PO number and material issued against this PO for subcontracting.
    I have checked that PO history is not getting updated.
    Thanks,

    Hi,
    We have 2 different scenarios where you can post a goods issue to Subcontract Venodrs.
    Scenarios 1: You can post the goods issue against a subcontrac vendor with out referencing the Subcon PO from ME2O, at this stage we will be knowing what is the stock at subcontract vendor but we will not be knowing the issues against which and how much Quantities are posted.
    So when we are post goods receipt, then we will come to know the consuption quantities.
    Scenario: 2, If we use the delivery concept then we can track the goods issues against the subcon POs.
    If you really keen to track the material issued to Subcon vendor against a PO so better use with delivery.
    Thansk,
    Satya.

  • SAP Script : to display the material description in two lines

    Hi All,
    I'm working on scripts.
    the material description field is been passed from my driver program ..into the script..
    Ex: &gs_final-maktx& ..
    There r a number of other fields to be displayed ...after this field ....
    Is there any option to split the 'Material description into two lines'?
    Ex: at present it is :
    This is material description
    Requirement is:
    This is material
    description
    I mean that there a number of field berfore and after this field......in the same line
    I need to jst split the materia description ...& make it to appear in two lines.....!!
    Expecting your suggestions....
    Edited by: vidya vidya on Nov 11, 2008 3:17 PM
    Edited by: vidya vidya on Nov 11, 2008 3:20 PM

    FM TEXT_SPLIT ?
    ..but i handled this by code.
    DATA:      zzboldsx(18) TYPE c,
          zzboldsx2(18) TYPE c,
          zzboldsx3(18) TYPE c,
          zzboldsx4(18) TYPE c.
    DATA: i_lines TYPE STANDARD TABLE OF tline WITH HEADER LINE ,
            r_lines TYPE tline,
            v_cnt LIKE sy-tabix.
    CALL FUNCTION 'READ_TEXT'
        EXPORTING
          client                  = sy-mandt
          id                      = stxh-tdid
          language                = stxh-tdspras
          name                    = name
          object                  = stxh-tdobject
        TABLES
          lines                   = i_lines[]
        EXCEPTIONS
          id                      = 1
          language                = 2
          name                    = 3
          not_found               = 4
          object                  = 5
          reference_check         = 6
          wrong_access_to_archive = 7
          OTHERS                  = 8.
      IF sy-subrc = 0.
    * Only 4 lines of Header text supported. Can add if needed
        LOOP AT i_lines INTO r_lines.
          CONDENSE r_lines-tdline NO-GAPS.
          v_cnt = v_cnt + 1.
          CASE v_cnt.
            WHEN 1.
              zzboldsx = r_lines-tdline.
            WHEN 2.
              zzboldsx2 = r_lines-tdline.
            WHEN 3.
              zzboldsx3 = r_lines-tdline.
            WHEN 4.
              zzboldsx4 = r_lines-tdline.
            WHEN OTHERS.
              EXIT.
          ENDCASE.
    *   zzbolDSX =  i_lines-tdline .
        ENDLOOP.

  • Goods(Material) issue to production

    Hi All,
    While issuing materials against production orders, my client has specific requirement to issue material from a specific supplier only to production. Stocks are lying at plant from various sources(suppliers). We have stocks with split valuation with different sources of supply on the single material code.
    How can it be restricted to any one of the supplier(source of supply).?
    Within a storage location, I have the stocks seperately identified supplier wise as "IMPORTED" & "DOMESTIC".
    While issue of goods can't i issue only material in "IMPORTED" stock and lock the material issue of "DOMESTIC" stock.
    In split valuation, during each material movement the system prompts to select the valuation type.
    In this case either "Domestic " or "Imported". So can i somehow block the prompting of any one of the valuation type?(say domestic)..
    Durga.

    Hi,
    You can restrict the goods movement by applying STOCK DETERMINATION RULE for your material as you have the option of selecting a valuation type and restricting it from issuing the material.
    Please read the documentation and if you want a detailed setting on how to customize revert back..
    https://forums.sdn.sap.com/click.jspa?searchID=18444194&messageID=5740972
    Regards,
    Deepak.

  • Material Quantity difference document line item for HU

    Dear Experts,
    When I try to clear differences in LI21,  i get the error message as above.
    Error Message : 'Material Quantity difference document line item for HU'
    Any idea why this error occurs?
    Regards,
    Shetty

    Hello Shetty,
    It may be due to some stock inconsistency. You may try iin case of  a non HU managed storage location HU to run LX23 and it can fix discrepancy overwrting MM-IM with LE-WM data. But if it is a HU managed then you can run HUDIFF transaction but only to see if there is stock differences not to fix anything, usually SAP Support (Development Support) does that job.
    Have a nice day !!

  • Sending material back to production line

    Hi all,
    Can I send a material back to production line once the GR is done after production,UD is taken(inspection type 04 active) and the material is now in unrestricted stock.

    Sherya,
    I hope you are working on REM process of SAP -PP, in transaction MFBF you can click the "Neutral Reversal", now the quantity field would be with negative quantity, enter the required reversal quantity and then perform the backflush.
    Once the above is done, you can again perform Backflush using MFBF for the new Serial number.
    If you are'nt working on REM, then you can use transaction MB31 movement type 102 for reversing.
    You cannot reverse the Backflush document or Material document using MBST, since QM is active and UD is over, but certainly you would be allowed on the above process suggested by me.
    Regards,
    Prasobh

  • Urgent : Issue with deleting Line Item in ME22N

    Hi all,
    I have an issue with deleting line item in ME22N for some Purchase Orders.
    When I try to delete the line item, a warning message comes up saying that " Quantity invoiced or delivered is less than the quantity ordered". And I am unable to proceed further and save the PO. Could anyone let me know as why this is happening?
    Thanks in advance.
    Regards,
    Adapala.

    Hi
    there is no need of group key.
    if any of these 3 are done, payment will be done in total.
    1.In setup all company codes for payment transactions , DESELECT seperate payment per business area check box
    2.In setup paying company codes for payment transactions , DESELECT seperate payment for each reference check box.
    3.In the Vendor Master got to payment transactions tab and below the payment method , there will be individual payment checkbox. DESELECT that check box.
    try again with first two with DESELECT options , i will check out with DME.
    Cheers

  • Material Issue to cost center which are not allocated to ML

    Dear Experts,
    We have a senario, Material issue to the cost center and through activity type the cost updated in production order, Client wants when reu  CKMLCP the same should  be updated in ML, and also revaluate actual activity price and updated in cost center.
    Please help to solve the issue.
    Thank you

    Hi Nuki
    I hope this material is not price control = 3/S (standard) and also the cost center is not productive type.
    If you consume material with standard price to production cost center it will start a looping in activity calculation and at month end there will balance in this cost center.
    Well I hope I helped you.
    Regards

  • Issue In Distribution Line

    Hi All,
    We are currently using 12.0.4 to migrate to 12.1.3. we have facing one issue in distribution line I am not able to select Withhold Tax Group because Withholding Tax Group column is freeze. Even I enable Withholding Tax Group on my supplier.
    Regards,
    Yasir

    Hi,
    Below are the reasons for this issue.
    1. Did you enable Use Withholding Tax in Pay in Payable option under the withholding tax tab.
    2. And also enable Allow withholding Tax option in supplier site.
    Regards,
    Raju.

Maybe you are looking for