Material Ledger - actual costing in intercompany transfer order

Hi Gurus,
in my client's scenario there are a lot a of one-step intercompany transfer order (from plant A in company 1 to plant B in company 2), the ML is active and we have EHP4.
We're into the design phase and the client doesn't know yet exactelly the requirements but i would need to know the possibile solutions about actual costing calculation:
Case 1: is it possible to have the actual cost and cost component split in receiver plant equal to the sender one, and with margin between sender and receiver in a dedicated cost element? What are the settings to be done in SAP?
Case 2: is it possible to have the actual cost and cost component split in receiver plant NOT equal to the sender one, so with cost component split only depending by the price condition into the intercompany PO and margin between sender and receiver NOT in a dedicated cost element? What are the settings to be done in SAP?
Thank you very much!!
Marco

Hi Marco,
You can read the documentation provided in this link
http://help.sap.com/erp2005_ehp_06/helpdata/en/c5/616893ba30402faeb09c151b4fa24c/frameset.htm
Regards
Ali

Similar Messages

  • Material Ledger : Actual Cost settlement to Consumption Accounts

    Dear CO Experts,
    We are aware that when we run CKMLCP, all variances (in the Price Diff GL Account) due to Material Prices flutuation, diff in Standard & Actual Cost of Production, etc. would finally get settled to Consumption or Stock Account in its appropriate ratios.
    Consumption Acount GL is a Cost Element with Cost Category as 1.
    There can be cases, when there are diferences in Production Order, due to fluctuations in Prices or Actual consumption is more than standard consumption.
    When a Production Order is settled the difference is posted to Price Diff Account.
    When a Material Ledger (Actual Costing) is executed, Price Diff Account is targetted to be Zero. The Price Diff is then splitted in Stock & Consumtion Account in its appropriate ratios.
    Main Question :
    Since, Consumption Acount GL is a Cost Element with Cost Category as 1, what shall be the CO Account Assignment Object, when the ML value is settled to Consumption Accounts.

    hi merchant..
       1. Price diff between stnd and act is initially goes to PRD a/c through OBYC setting at the time of GR/Invoiceing/Issue if mat is set as S&3.
       2. In case of mat set as V&2 idially there should not be any diff but may arise some small amount due to "no or less stock qty" at the time of invoicing.
      3. When CKMLCP is run these price diff & order settlement diff splitted to cons and stock as you mentioned.
    Now your question :
      " Since, Consumption Acount GL is a Cost Element with Cost Category as 1, what shall be the CO Account Assignment Object, when the ML value is settled to Consumption Accounts"
        Cons GL is cost element cat 1 for capturing mat mov for Issues to orders/cost centres,oth co obj for primary posting at stnd price.
        Now at the time of CKMLCP run you revaluate the materials and price diff are splitted to cons & stock and goes to mat to calculate act cost (stnd +/- prd).
    I think this will give you some light on your issue.
      kkumar

  • Material Ledger - Actual costing

    Hi experts,
    I am searching for the best practices with ML actual costing.
    Please let me know whether it is the best choice to ML perform costing run based on YTD, or periodwise?
    What are your experiences related to production orders WIP calculations and prevent of lost costs?
    Please advice whether I can count with some positives or negatives while I decided to use ML costing run on YTD basis?
    Thanks a lot

    Hi Jay,
    that can be done without issues. At least not from a system point of view. If the company's finance people and the auditor can live with a new valuation method in the middle of the year, just activate material ledger and perform the closing from that ponit in time onwards.
    And even if they are not sure: you still can activate ML and calculate the actual prices, but then don't post them as revaluations but just as accruals, more or less statistically.
    best regards,
                   Udo

  • Material Ledger-Actual costing Run

    Deal All,
    I would like to run actual costing for previous period and current period (April-Mar)
    08-Nov
    09-Dec
    But I have not done the period end closing for prior perods means 01-07.
    If I do now actual cost run for 08 & 09 what will be the impact on systems?
    Best Regards,
    Sbpsbp

    Hi,
    Basically a monthly Material Ledger closing should be processed in all period, so you already have shifted a period in material master, you cannot processed a couple of preceding months with some error: C712 or C805 etc.
    If you are facing above situation, please check SAP Note 361236.

  • Material Ledger Actual costing - fully costed BOMs and variance type split

    We are in the process of activating material ledger and have 2 user
    requirements that we have not yet been able to complete. First, the
    difference between standard cost and weighted average cost needs to be
    split between the variance types (raw material purchase price, raw
    material usage, packaging price, packaging usage, etc.). Secondly we
    need a fully exploded cost itemization that supports the weighted
    average cost, similar to the costing structure pane in transaction
    ck13n.
    Do you know of any custom developement that might assist us in these
    requirements, or have any information that might help us develop a
    process to calculate these values ourselves.
    Thanks

    We are in the process of activating material ledger and have 2 user
    requirements that we have not yet been able to complete. First, the
    difference between standard cost and weighted average cost needs to be
    split between the variance types (raw material purchase price, raw
    material usage, packaging price, packaging usage, etc.). Secondly we
    need a fully exploded cost itemization that supports the weighted
    average cost, similar to the costing structure pane in transaction
    ck13n.
    Do you know of any custom developement that might assist us in these
    requirements, or have any information that might help us develop a
    process to calculate these values ourselves.
    Thanks

  • Material Ledger Functionality with Non Valuated Sales Order Stock

    We are in the process of setting up Make To Order (MTO) with Non Valuated Sales Order Stock. We currently use the Material Ledger in our other businesses that use Process Orders.
    Does the Material Ledger functionality support MTO with Non Valuated Sales Order Stock? I have been testing this and have not yet figured out how to get ML postings. We are using production orders that settle to sales orders. We do not bring this into inventory, the costs reside on the sales order.
    If this functionality does exist, I would assume I need to configure the Material Update Structure but I cannot find any documentation on this.
    Any help would be appreciated.
    Regards,
    Greg

    Hi Greg,
    no, material ledger will not be able to calculate and allocate actual costs for the sales order in the scenario you describe. It would of course, if you used the valuated sales order stock.
    Generally SAP sees in the valuated sales order stocks (avaliable since 3,1 or something) a great improvement and no real reason to use still the non-valuated scenario.
    best regards,
                          Udo

  • Report to fetch Actual cost from a service order

    Hi Gurus,
    The requirement is to create a report to fecth the actual cost from the maintenance order. ie.. material cost , labor cost and some other costs which are directly posted to the order. Can anybody let me know from which tables I can pull the material cost , labor cost ..etc posted against maintenance order?
    Regards,
    John

    John,
    Have a look in table PMCO
    PeteA

  • FM for Actual cost line items for orders.

    HI EXPERTS,
    I was working on Actual cost line items for orders / Internal orders of an employee.
    standard program RKAEP000 is present through TCODE KOB1.
    I want some customization of report, so debugged the program and found that its using a FM 'K_LINE_ITEMS_SELECT_AND_LIST' to calculate internal orders.
    But the FM has used REUSE_ALV_* and displaying output itself.
    the requirement is to customize the output display .
    I searched with K_LINE_* and found some other function modules too.
    K_LINE_ITEM_CHECK                                                                               
    K_LINE_ITEM_APC_SIGN_GET                                         
    K_LINE_ITEM_GET_CONTEXT_MENU                                     
    K_LINE_ITEM_GET_TOOLBAR                                          
    K_LINE_ITEM_LOGICAL_KEY_GET                                      
    K_LINE_ITEM_TECH_SETTINGS_SET                                    
    K_LINE_ITEM_VALUE_TYPES_GET                                      
    K_LINE_ITEM_VALUE_TYPES_SET                                                                               
    K_LINE_ITEMS_ACT_GRID                                            
    K_LINE_ITEMS_SELECT                                              
    K_LINE_ITEMS_SELECT_AND_LIST                                     
    K_LINE_ITEM_ACT_CALL_WITH_DATA                                   
    K_LINE_ITEM_ACT_DATA_GET                                         
    K_LINE_ITEM_CM_CALL_WITH_DATA                                    
    K_LINE_ITEM_DEV_CALL_WITH_DATA                                   
    K_LINE_ITEM_PLN_CALL_WITH_DATA                                   
    K_LINE_ITEM_PROCESS_UCOMM_ACT                                    
    K_LINE_ITEM_STEERING_GET                                                                               
    Can anybody tell which FM should i use so that result i will get in an internal table?
    or suggest any other methods
    Thanks in Advance.
    Lucky

    I also had the same requirement and used function module K_LINE_ITEM_ACT_DATA_GET
    this function is calling K_LINE_ITEMS_SELECT_AND_LIST function with  I_NO_DISPLAY parameter
    and returning the result.
    Already they are in same function group,
    I wrote this for future requirements of people  after 4 years of this thread

  • Actual cost line items for orders (KOB1)

    Hello everyone,
    I need to pull a certain field for an order to the
    Actual cost line items for orders report (KOB1), but the field is not available when I
    go to the change layout. Can someone let me know how I can have this
    field listed?
    Thanks in advance for your reply.
    Daniel Nicula

    Hi Christian,
    Ok, so I would need some ABAP support for this right? I was hoping to do it myself.
    But, the strange thing is that the field that I would like to bring in my layout is available in 2 clients in the same system and not in all the clients. I have one client in which this field is not available.
    How can that be possible?
    Bye!

  • Not displaying Actual cost Line Items for Order

    Hi Gurus,
    Recently we did patching from SPC6 to SPC8. After patching we noticed that could not able to see displaying Actual cost Line Items for Order from work order.
    System is not throughing error message when I double cline on line item at Plan/Actual Comparison screen in work order cost tab.
    We can able to see the same from KB01 with out any problem. I have attached the details.
    Could any one suggest me please. Appreciate your thoughts
    Regards,
    Srini

    Hi Paul,
    I have implemented this note and get it sorted out.
    Thank you for support.
    Regards,
    Srini

  • Return Delivery of Intercompany Transfer Order

    Dear guru ,
    I want to know all the transactions for the logistic and accounting process of Return of Intercompany transfer order.
    Thanks.

    hi,
    Can try :
    ME21N Retun Intercompany Purchase Order
    VL10D Create Outbound Delivery for Purchase Order Item
    VL02N Post Goods Receipt for your plants....)
    Post invoice based on it...
    Post the credit memo....
    You can make other company as a vendor....and then can go ahead...
    hope it helps...
    Regards
    Priyanka.P

  • Table where i see actual cost line item for order (KKBC_PKO)

    Dear.
    Using transaction KKBC_PKO i can see the actual cost line item for order.
    In which table I see these data ?
    Thanls

    Hi,
    check COEP (CO actual line items) the objectnumber is OR+the order number.
    Best regards, Christian

  • Table where i see actual cost line item for order (KRMI)

    Dear.
    I need to know the table of every single document number of a cost element that I see in the actual cost line item for orders using transaction KRMI.
    Thanks
    Moderator: Please, search SDN

    Hi
    Refer the field Object No (OBJNR) in COEP.. In your case, the OBJNR would be ORXXXXYYYYYYYYYYY, where OR means Order, XXXX = Contr Area and YYYYYYYY = Int Order No with preceeding zeroes
    Qty is also recorded in COEP
    BR,Ajay M

  • Additional Data On Actual Cost Line Item for Orders. Possible?

    Is it possible to show on display of Actual Cost Line Item for Orders the cost center for both settled and not yet settled? As for now we can only view the cost centers that are already settled. Please see attached file for a snap picture of the display.
    Thank you in advance.

    Hi,
    How this would be possible? If the document is not yet settled, then cost centre is unknown. Of course, it is stored in settlement rule, but no actual posting was done yet.
    Regards,
    Eli

  • Material Master (Material Ledger- Product cost actual costing)

    When I create a material in MM01 and no Standard price is set the columns "Company code currency" y "Profit valuation" are disabled.
    The only column available is the one corresponding to company code currency. The field "Price unit" starts with the number of 1000 and this information is not copied to the other price unit fields unless you introduce a value in the Standar price - Company code currency field.
    Does any one knows a user exit that can modify this values (Price unit - Group Currency and Price unit - Profit valuation) ?
    Kind Regards

    Hi
    1. It is not  mondatory to activate Material ledger to create Product Cost collector.
    2  It is not  mondatory to create product cost collector if we actovate Material Ledger.
    Material ledger Activation
    1. In OMX1 activate ML and price determination 3 for production plants and 2 for sales depo plants (if need)
    2 In. OMX3 assign ML type standard
    3. Configure dynamic price changes : assign price release  1
    4. Assign material update structure to a valuation area
    5. Activate actual costing indicator and assign  2     Activity update relevant to price determination
    PCC:
    1.In KKF6N,enter the material,plant and select create button and select the order type as
    RM01, radio button selected for production version and assign the production version here
    2.Save the PCC for preliminary costing
    3. PCC integrates with PP module in production version selection
    Regards
    Dev

Maybe you are looking for