Material ledger error while doing GR

Hello,
I am getting the error " Error reading material ledger header record while doing Gr for particular material.when double clicked the error,I see this message "Internal error in function module CKMS_HEADER_READ_WITH_ITAB"
what may be the issue?
Regards
Goutham

HI,
I assume, you got the problem after material ledger activation or Material split valuation
please check the following two points;
There may be one reason, i hope the material is split valuated after creation of PO. Plese check the Material master in the accounting view whether it is split valuation activated or not
2. problem is other side, at the time PO creation, material is having split valuation after that materil was changed to non- split valuation.
With regards
Madhav

Similar Messages

Error while doing picking

Hi Gurus,
I am getting a error while doing picking manually which is as below.
"Batches/valuationclass not completed"
Please tell me the what is the cause.
Thanks and Regards,
Anand.

Hi Anand,
It seems that your batch number field in delivery is greyed out. During goods receipt check whether the batchs are maintained for the material or not. If not maintained maintain the batches for the material. First check the GR.
regards
prasad

I am getting error while doing MFBF for semifinisg good

Hi,
i am getting error while doing MFBF for semifinisg good
Existing standard cost estimate cannot be used
Message no. RM175
Diagnosis
This error appears under the following circumstances:
The existing standard cost estimate cannot be used for backflushing activities as the repetitive manufacturing profile was not maintained correctly when the standard cost estimate was carried out.
The standard cost estimate must come from product costing. Other cost estimates (such as base object controlling) are not possible.
Procedure
The repetitive manufacturing profile assigned to the material at the time of the planned cost estimate must be a profile for repetitive manufacturing with product cost collector.
Use product costing to create the standard cost estimate.

I had already check REM profile repetitive mfg profile final backflush w. activities.
this particular material is semifinish material attached in BOM of finish material.
backflush of finish good is possible but now new requirement is to do production booking for the semifinish material.
i had assign production version , done routing and maintain REM profile,
created material cost with quantity structure ck11n then run the costing in ck40n.
still getting the error what else is to done to able to book this thru MFBF.

Error while doing J1IJ

Hi I am getting an error while doing J1IJ which states "Quantity selected for excise invoice exceeds remaining qty.". Can you please advice on the same. Thanks in advance.

Hi
Check the following link
Material On CIN
Cheers
Chandra

Error while doing GR : Deficit of PU GR quantity 5 EA

I am getting the below error while doing the reversal of GR:
Deficit of PU GR quantity 5 EA : <material><plant><pur grp>
Please let me know the solution to rectify it.
Thanks in advance.

Hi,
Check the latest goods issue docs for this quantity and cancel that GI doc. This will bring the required stock to enable you cancel the GR. After creating new GR, cancel the "cancelled GI doc" to complete the loop.
or
Increase the stock by doing GR against 501. After new GR, cancel this 501 doc.
or
Post issue return (202) for this quantity. After new GR, cancel this 202 doc.
or
thro' physical inventory, you can add the stock. After new GR, make another PI doc. to set right the stock.
While the first option is a best one, based on your urgency/superior approval, you may opt for other options also.
Regards,
Siva

Error While Doing GR "Check table YMSEG:"

I am getting following error while doing GR for sales set article 303387.
Check table YMSEG: entry 303384 0001 does not exist
Sales set header 303387
sales set Component 303384 & 303386.
can't find any issue with the article (material) setup

YMSEG is a standard internal table used in import and export of function modules.
if you search SAP notes on YMSEG then you get about 230 hits.
Unfortunately the info given is by far not enough to tell you the reason for this error.
The number from the error explains just that it is one of the sales set Components
But you need to describe the process and what changes you eventually did compared to standard process. Only then we might be able to help you further.

Error while doing outbound delivery against Purchase Order

hello
i m getting error while doing Outbound delivery for purchase order as follows
EKPO-SOBKZ=E; EKPO-UMSOK=_; EKPO-KZBWS<>_ EKPO-KZVBR<>E (Note 305582) not supported (check your entry)
Message no. M7146, i m not getting wht will be the reason,
Regards
NISHJ

Please go through the note - 305582. It is clearly given the direction.
Symptom
You try to post a goods movement for a stock transport order from the unrestricted-use stock into the sales order stock or project stock.
During the goods issue, the system displays error message M7146 with a text along the lines of "EKPO-SOBKZ=E; EKPO-KZVBR<>E; ... not supported".
Cause and prerequisites
In the goods issue for the stock transport order, the system may have to create a stock in transit which is deconstructed during the goods receipt. If the withdrawal takes place from the special stock, it is clear which is the receiving stock.
However, if the withdrawal is carried out from the unrestricted-use stock ("Collective requirements", controlled by the dependent requirements indicator MARC-SBDKZ in the material master of the issuing plant), this results in the design problem that the control tables of the goods movement do not have any key field for the receiving stock. Therefore, the control for the receiving stock is controlled via the consumption indicator in the account assignment category of the purchase order. The consumption indicator therefore requires a specific default setting (you may have assumed you could change the design of these control tables, however this is not possible).
Using an inappropriate consumption indicator then causes for the goods issue an incorrect or no stock in transit to be created so that the goods receipt fails.
Solution
Implement the program change in accordance with the correction instructions.
Afterwards implement Note 413908 immediately if this is relevant for your release.

Getting the error while doing PGI for depot delivery

Hi
I am getting the below error while doing PGI for Depot delivery. This error is happening only when I taking the materials from stock transfer order which has more than 10 line items. Same issue is not happening when I am taking one material in Stock transfer order in & same material in depot delivery. Please see the screen shots below attachment. I have already maintained no range for the object J_1IDEPINV for year 2014.
Regards
PK

Moved from SAP ERP SD Sales to Internationalization and Unicode. Please post all your CIN related queries here. Also ensure that before posting, you made efforts in searching in SCN or Google. The reason for this indication is the issue you posted has already been discussed many times here and you will get some clue had you searched.
G. Lakshmipathi

Error while doing fb01L

Hello
I have activated non leading ledger and while doing FB01L , i am getting the following error
In company code XXXX, the number range SA is missing for the year 2010
Message no. F5150
Diagnosis
The document type you specified has been allocated to a number range in fiscal year "2010" that has not been created.
Procedure
Check the configuration of the number range for the specified document type. Create this number range if it does not already exist or allocate a valid number range for the document type.
Note
Enter '9999' as the year if you want to use number ranges that are not dependent on a particular fiscal year. If you do this, the number range you allocate is then valid for the current and all following years.
If you want to use number ranges that are dependent on a fiscal year, you should create these manually for the years you require using the Copy by fiscal year function.
i HAVE ALREADY MANITAINED number range in the general ledger veiw for the document type SA , then also i am getting the error.
Kindly guide me to solve this issue
Regards,
Deepa

Hi,
For Non-Leading ledgers, the document types for the General View are defined. For each document type a no. range is also applied. These settings are made for any non-leading ledgers that have a fiscal year variant that differs in at least one company code from the fiscal year variant of the leading ledger in this company code.
Check if your Co. code Fiscal Year variant is different from your non Leading ledger Fiscal Year Variant. If yes, then you will have to maintain No. ranges once again in SAP Customizing Implementation Guide Financial Accounting (New)  Document Define Document Types for General ledger view.
In addition to this, if you are posting an entry directly in the non leading ledger, then you need to maintain no. ranges in Define Document Types for Entry View in a Ledger against the non leading ledger.
Regards,
SAPFICO

Error while doing ABGL Asset Credit Memo

Hi Friends,
I am getting the below error while doing Asset Credit Memo in ABGL. Please help me in fix this issue.
Balance for transaction type group 10 negative for the area 01
Note:In Asset Explorer Fiscal year start Asset value is 98,425.45 and Change is 4768.19. So total Asset value as of now is 1,03,193.64.
Now we are trying to do ABGL with 12,790.23 value (Transaction type is 105). System is giving the above highlighted error.
If we give the amount 4768.19 in ABGL transaction, system is not giving any error. If we give more that that system is giving error.
Why system is giving error even the asset has balance of 1,03,193.64? Please help me on this..
Thanks
Sunil

Hi,
If the asset has been capitalized during earlier years, use ABGF to post credit memo. ABGL is meant for assets capitalized during the year.
Best Regards,
Madhu

Error while doing "Visulaize Plan"

Hi,
Before i did Visualize plan many times without any problem.Now I am getting error while doing so.
I was able to run "Explain Plan" successfully.
I am on HANA revision 60.
I saved above error log and the log information is given below:
I can identify invalid XML tag <TablesInvolved><![CDATA[raj/AN_VIZ]]></TablesInvolved> but how to fix this issue?
I gone through various blogs related to Visulaization Plan but not found related to this issue.
<Plan xmlns="http://www.sap.com/ndb/planviz" ID="ID_0" Type="Estimated">
<SQL><![CDATA[SELECT KOKRS, BELNR, PERIO, SUM(MEGBTR)
FROM "_SYS_BIC"."raj/AN_VIZ"
GROUP BY KOKRS, BELNR, PERIO]]></SQL>
<CompileTime>
<Start Unit="us">1401281467643661</Start>
<End Unit="us">1401281467658329</End>
</CompileTime>
<RootRelation ID="ID_0" TypeName="PROJECT" Status="Finished">
<Name>Project</Name>
<ExecutionType>Row Search</ExecutionType>
<Summary><![CDATA[raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO, SUM(raj/AN_VIZ.MEGBTR)]]></Summary>
<Location>hanasp7:30003</Location>
<EstimatedCost>
   <Exclusive Unit="us">2.12902e+06</Exclusive>
   <Inclusive Unit="us">2.64021e+06</Inclusive>
</EstimatedCost>
<EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
<Details><![CDATA[{"Projected Cols":"raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO, SUM(raj/AN_VIZ.MEGBTR)","Project column0":"NString(4, 0) __trex_field_NVarchar3__() ....... [3]:040:<5/7 (16B)>:
/1/ void* \"__rids__\" ....... [0]:NOP:<0/1 (8B)>:
/2/ int32_t(10, 0) const := 0 ....... [1]:LOAD:<3/4 (4B)>:
/3/ int32_t(10, 0) const := 0 ....... [2]:LOAD:<4/5 (4B)>:","Project column1":"NString(10, 0) __trex_field_NVarchar3__() ....... [8]:040:<5/7 (16B)>:
/1/ void* \"__rids__\" ....... [5]:NOP:<0/1 (8B)>:
/2/ int32_t(10, 0) const := 0 ....... [6]:LOAD:<3/4 (4B)>:
/3/ int32_t(10, 0) const := 1 ....... [7]:LOAD:<4/5 (4B)>:","Project column2":"NString(3, 0) __trex_field_NVarchar3__() ....... [13]:040:<5/7 (16B)>:
/1/ void* \"__rids__\" ....... [10]:NOP:<0/1 (8B)>:
/2/ int32_t(10, 0) const := 0 ....... [11]:LOAD:<3/4 (4B)>:
/3/ int32_t(10, 0) const := 2 ....... [12]:LOAD:<4/5 (4B)>:","Project column3":"Decimal(18, 3) __typecast__() ....... [23]:076:<10/12 (16B)>:
/1/ Fixed16(18, 3) __trex_field_Fixed16__() ....... [19]:043:<6/8 (16B)>:
     /1/ void* \"__rids__\" ....... [15]:NOP:<0/1 (8B)>:
     /2/ int32_t(10, 0) const := 0 ....... [16]:LOAD:<3/4 (4B)>:
     /3/ int32_t(10, 0) const := 3 ....... [17]:LOAD:<4/5 (4B)>:
     /4/ int32_t(10, 0) const := 3 ....... [18]:LOAD:<5/6 (4B)>:
/2/ int32_t(10, 0) const := 18 ....... [21]:LOAD:<8/9 (4B)>:
/3/ int32_t(10, 0) const := 3 ....... [22]:LOAD:<9/10 (4B)>:"}]]></Details>
<Child ID="ID_8" >
</Child>
</RootRelation>
<Relation ID="ID_8" TypeName="TREX_SEARCH" Status="Finished">
<Name>Column Search</Name>
<ExecutionType>Column Search</ExecutionType>
<Summary><![CDATA[Aggregation on a single table]]></Summary>
<Location>hanasp7:30003</Location>
<EstimatedCost>
   <Exclusive Unit="us">511194</Exclusive>
   <Inclusive Unit="us">511194</Inclusive>
</EstimatedCost>
<EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
<TablesInvolved><![CDATA[raj/AN_VIZ]]></TablesInvolved>
<LogicalPlan ID="ID_11" Type="Estimated">
   <RootRelation ID="ID_11" TypeName="PROJECT" Status="Finished">
    <Name>Project</Name>
    <EstimatedCost>
     <Exclusive Unit="us">0</Exclusive>
     <Inclusive Unit="us">0</Inclusive>
    </EstimatedCost>
    <EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
    <Child ID="ID_12" >
    </Child>
   </RootRelation>
   <Relation ID="ID_12" TypeName="GROUP_BY" Status="Finished">
    <Name>Aggregation</Name>
    <Summary><![CDATA[raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO\nSUM(raj/AN_VIZ.MEGBTR)]]></Summary>
    <EstimatedCost>
     <Exclusive Unit="us">0</Exclusive>
     <Inclusive Unit="us">0</Inclusive>
    </EstimatedCost>
    <EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
    <Details><![CDATA[{"Grouping Cols":"raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO","Aggregation Cols":"SUM(raj/AN_VIZ.MEGBTR)"}]]></Details>
    <Child ID="ID_13" >
    </Child>
   </Relation>
   <Relation ID="ID_13" TypeName="TABLE" Status="Finished">
    <Name>Column View</Name>
    <Schema><![CDATA[_SYS_BIC]]></Schema>
    <ObjectName><![CDATA[raj/AN_VIZ]]></ObjectName>
    <Location>hanasp7:30003</Location>
    <EstimatedCost>
     <Exclusive Unit="us">0</Exclusive>
     <Inclusive Unit="us">0</Inclusive>
    </EstimatedCost>
    <EstimatedOutputCardinality>682404</EstimatedOutputCardinality>
   </Relation>
</LogicalPlan>
</Relation>
</Plan>
Regards
Raj

Hi,
To solve this you must update your studio. In lower studio versions (PlanViz) does not allow "unknown" XML tags sent by higher version servers. A fix for this issue was made so that PlanViz parser can simply skip unknown tags.
Please go to version 74, if possible.
Regards,
Michael

Error while doing EHP4 upgrade in downtime phase

HI .
Iam facing the below error while doing the EHP4 upgrade , in downtime phase.
Checks after phase MAIN_SWITCH/STARTSAP_TRANS were negative!
Last error code set: RFC call to subst_get_uvers failed with key RFC_ERROR_COMMUNICATION (open): SAP_CMINIT3 : rc=20 >
Connect to SAP gateway failed Connect_PM GWHOST=Hydhtc4526D, GWSERV=sapgw04, SYSNR=04 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.136.162.30:3304' not reached TIME Mon Jun 06 18:17:46 2011 RELEASE 720 COMPONENT NI (network interface) VERSION 40 RC -10 MODULE nixxi.cpp LINE 3286 DETAIL NiPConnect2: 10.136.162.30:3304 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER System start failed
Please help me in resolving this error.
Sanketh.

Hi,
Upgrade tool is trying to start the system but system is not coming up. Try to start system manually and see if system comes up or not. If not then check logs in work directory for why system is not coming up.
Thanks
Sunny

Error while doing GR for scheduling aggrement

Dear Experts,
We are facing error while doing GR for scheduling aggrement.
we have done the following steps.
1) Scheduling aggreement in ME31L
2) Released in ME35L
3) Mainatined Sch.Agmt Schdule in ME38 for todays and date 200 qty and other line is 800 qty.
When we are trying to do GR in MIGO system is giving the following message.
Document 5500000152 does not contain any selectable items
can I know what I have missed in the above steps.
Please guide me to resolve this.
Regards,
Prasad

Hi,
Please check Please check if Gr is already done against this document. Also please check whether you have attached SA in the source list with line items.
T-code:ME01
Enter Mat.code & Plant.
In the next screen pl.do the following:
Valid from - commencement date of the SA
Valid to - End date of the SA
Vendor - Vendor on whom the SA is released
POrg - Your purchase organisation
PPL - Leave it blank(This is only for interplant)
OUn - Ordering unit
Agreement - SA number
Item - 1
I hope this will resolve your issue. Thanking you

Error While doing ABT1N transaction

Hi,
I am facing the below error while doing ABT1N in Asset Accounting.Please help me in fixing this Issue.
Error Message -No depreciation area for receiving the revenue
Message no.AAPO149
Diagnosis
You tried to post a retirement on asset 1000 100007-0.You entered transaction type 300,in which the retirement with revenue indicator is not set
You tried to transfer asset 1000 100007-0.According to transfer variant 0001,none of the areas on the asset uses a transaction type for retirement with revenue
In both of these cases, you are not allowed to enter revenue or make specifications for the determination of revenue.
Proceedure
Check the transfer variant and check your entry
please do the needful
Thanks
Supriya

Hello,
You will have a check box for the same.
Double click on transaction type, you will see the check box for revenue.
Otherwise, tomorrow I will get back to you once I am in front of the system.
Regards,
Ravi
Edited by: Ravi Sankar Venna on May 5, 2009 7:53 PM

Error while doing F-90 Asset Acquisation

Hi,
I am getting the below error while doing F-90 Asset Acquisation scenario. Please help me to fix this issue.
Tax code V1 country IN does not exist in procedure TAXINN
Message no. FF713
Diagnosis
You entered a tax code which is not defined for the country of the company code to be posted to in the tax calculation procedure.
System Response
Procedure
Check and, if necessary, correct the entry.
Procedure for System Administration
If it is not an input error, check and possibly change the system settings.
To do this, choose Maintain entries (F5).
Check whether the company code is assigned to the correct country and whether the correct tax calculation procedure has been entered for the company code country.
Create a new tax code if necessary.
Caution:
Since it is possible that the tables in question are being updated at a different time on another computer, it can take a certain amount of time for the tax code to be on all local machines in client server architectures after saving the new code.
Thanks
KB

Hi,
you need to maintain Tax Code A0 & V0 in t.code OBCL t.code.
and also ensure to check whether you have created tax code V1 or not in FTXP t.code. If not, create V1 tax code and assign GL on that in the right Transaction event keys in OB40.
Try.... if not working let me know....
Regards,
MOhan.

Material ledger error while doing GR

Similar Messages

Maybe you are looking for