Material Ledger Periodic Price

hello gurus,
we are activated the material ledger.when we run ckmlcp the perodic price become the standard price.but my client wants standard price only they wants perodic price only for statiscal purpose only
For ex:
std price 100
periodic price is 150
when we run the month end activities periodic price become the std price i.e 150
but our client wants std price 100 for all periods and periodic price only for information prupose
for this how can configure in the system
Regards,
Rihana

Dear Rihana,
You can change the Price determination control from '3' to '2'. For materials with 'price control' = 'S' and 'price determination
control' = '2' the periodic unit price (PUP or v-price) is for statistical purpose only. However, please note that 2S-materials will not be selected during period-end closing. Only 3S-materials will be handled in txn CKMLCP.
Kind Regards,
Antje

Similar Messages

Material ledger (ML) price analysis, LACCS & CKMLLA return err. CKMLLA001

Dear colleagues,
We're experiencing problems analysing actual cost component split on material level after Material Ledger closing and need some help.
OSS-note 872421 "Cost component split display for activity types" comes with two transactions for the purpose of analysing prices. But both transactions LACCS & CKMLLA don't work in our system, returning error message "Header not found: message № CKMLLA001" after trying to view ML prices (F5) or get Price report from LACCS as well as on Price report (F8) in CKMLLA.
There's no further info available on message CKMLLA001. Did anyone here happened to get this message? What could it mean, what should we check?
We need for analysing ML prices because the values in cost components split (according to CKM3, Itemization) differ greatly from what was expected on the basis of price analysis in Cost Center accounting (e.g. S_ALR_87013611).
OSS-note note 880217 "Cost component split and price do not match" is implemented in our system, as well as recommendations from the corresponding note 1090144 "Preventing rounding errors in prices" are taken into account. For activity prices number of significant digits is set to 10, "no optimization" not selected. Though we don't get any warnings # 204: "Split and price of cost elem./activity type &1/&2 not consistent" during multi-level price determination, the totals are close to equal in ML costing compared to CC costing.

MATERIAL LEDGER AND PRICE CONTROL V

Hi Gurus.
In a Plant I've activated material ledger and some materials have price control V. how does price control V works with material ledger? the average price is uptated at the end of the month or is updated with every receipt?
Kind Regards.

Hi Andres,
What is the price determination indicator in material master? is it 3 or 2?
Materail ledger during the Actaul Costing Run consider only the price determination indicator 3 material masters.
Generally all BOM component material masters, we should maintain price determination indicator 3 and price control S.
All other materials you can have price determination indicator 2 and price control V.
Regards,
ADI

Material ledger period-end closing - material selection based period status

Dear SAP Experts,
The OSS note 980475 describes functionality of excluding materials without inventory and postings from the period-end closing of the material ledger. The system assigns a new period status for materials without inventory and postings (05 "Period opened without inventory"). This period status is set by the dynamic period-closing program for the new period (instead of "Period opened") if the material does not have any inventory.
Could you clarify what is dynamic period-closing program for the new period?
In my system this note is implemented but still during costing closing materials are being selected even though no postings have been done on them in that period and no inventory exists.
Thankk you very much for advise.
Best regards,
Robert

Hi Robert, have you find out what this dynamic period closing is?is this just the option Check and close period in TCode MMPV? or is het one the CKMLCP steps?
thanx in advance,
Said Dahmaza.

Material Ledger-Periodic Unit price-Overhead cost calculation

Dear Friends,
My client using ML periodic unit pricing for reporting purpose.
Costing analysis with Standard price,I can be able to trace out how O/H would be calculated and derived into cost analysis.But with periodic unit price, the O/H figures are differnt from cost analysis with standard price.Iam unable to trace out how O/H is getting calculating in case of Periodic unit pricing.My client would like to know why the O/H rates are differnt and from where we are derving in case of periodic unit price.
Could some one tell where I can find out the configuration setting for O/H rates maintenence for periodic unit pricing.
Thanks & Regards.
Ram

HI Ajay,
Thanks for your reply.
I can find the O/H rates as you said but none of the O/H rates are matching with periodic Unit price cost analysis.
The main question was how O/H rates with periodic unit price are differnt from O/H rates with standard price ?.I greatly apprceciate for your answer.
Thanks,
Ram

Material ledger - Multilevel price determination

Hello,
When there are transfer postings from Sales order stock to free stock, system has calculated multilevel price differences during settlement.
This material is a externally procured material and does not have any BOM.
Can some one explain the scenario when will the system calculate this multilevel price differences for a material which is externally procured and which does not have any BOM.

U have to use specil procurement type in Material master data.
Further cost based issues refer cost estimate w/o Quantity structure.

Material ledger Price determination change

For the FERT materials - we have material ledger active, price determination 2 and price control S setup as of now. We have the standard cost for the group and Moving average is calculated for information purposes - now we want the moving average to be periodic.
I changed the price determiation from 2 to 3 in ML activation but had no impact.
My questions are:
1. Should we do this at the material level - so that moving avg does not get updated for each transaction and instead by period.
2. what are the steps/tcodes to be taken before and after changing the price determination. I understand we need to run ckmlcp - but need clarity on all the steps I have to do both from config and master data perspective.
3. Test script steps

Hi!
A+ 1st point. Other decision is when you do MMPV.
B+ I think its better do MMPV on 01/may before do CKMM, so in point iii, you close of April. If you do CKMM with MMPV active period April, ML will be active for March and April. Again this is just a personal point of view.
C+ Well, the procedure is correct, Keep in mind the following: The system consider in your scenario S2 > S3 as Actual Cost of April the value in the standard at the moment of CKMM, so the flow:
> CKMM > Release Standard> At the release, system create a price diff (UMB), that is part of your actual cost (initial of may). The value is the diff of your previews and new standard.
In the ML Close of april, UMB of MAY will be cleared and converted in PRY/PRV. If you want details of this, check Standard Cost Release with ML Active.
Its important you validate it, because if the system dont select this materials, UMB $$ will be part of your P&L account.
In the ML close of May, this value will be consider part of the actual of May.
D+ What will happen if the run (iii) above after point (i ) will the ML revaluation will have impact on the material changes to 3S.
The ML close of april have impact if you post (GM, IR, Settlement) for this materials on April. If this materials are produced, its common that you do the settlement of its order the 1 or 2nd day of may with posting date of april, but as i toldyou is a common procedure.
E+ Just thinking, Its a good idea you do the ML close for this materials in April (status set to 70)
If for any reason your ML close dont select them there are some workaround eg check this oss 1602599 - Additional selection options for selection
PS1. Wish this give you more ideas. This topic is interesting and difficult to explain, because have some `depends on`. Again, i recomend you test in your QAS system!
PS2. This post maybe give you other ideas Material Ledger Activation - Lot of Questions in startup.
Arturo.

Material ledger - closing prior periods

We have a need (currently in development environment) where material ledger closing is not in sync with material period closing. Is there a way to "catch up" the material ledger. this is in a development environment only at this point. Basically, does anyone know how to close a material ledger period for more than 1 month back in history. e.g. curr period 1/2009 prev period 12/2008 ..like to close for periods prior to 12/2008

Hi David
If you dont need to perform the close itself but would just like to get the periods in the correct status you can use the process outlined in note 645083.
In the material ledger, it may be necessary for different reasons to manually set the period status of materials in former periods to 70 ("Closing Entry Completed") without actually carrying out the closing entry.
It provides program Z_ML_SET_PP_STATUS_70 that will allow a manual update to the prior period status.
There is a pre-requisite regarding revaluation amounts, but this is all described in the notes.
/Elaine

Material ledger Tables

Dear All,
Issue: Not able to post Good receipt due to the error that material does not exit.
Background: we have activated user exit in material master for material type ZROH and assigned a internal number range to it in MMNR. this user exit will append the material group mentioned during master creation in the internal code generated by system.
example PPMM is the material group and the internal code generated by system is 122222 so when we save the material in mm01 our material code is PPMM122222.
we are trying to do GR by 501 and now the material ledger function module is truncating PPMM from the material code and its trying to post document with 1222222. which then goes into error that material does not exist.
Analysis: I have checked in the MARA/MARC the material code is PPMM1222222. but i guess in some table whcih is relevant for material ledger system has stored internal material number 1222222.
So I am looking for tables or solution for this isssue

Hi Expert,
Please refer the SAP Standard Material Ledger Tables:
The following tables contain data that can appear in the material ledger documents:
Table - MLHD - Material Ledger Document: Header
Table - MLIT- Material Ledger Document: Items
Table - MLPP - Material Ledger Document: Posting Periods and Quantities
Table - MLPPF - Material Ledger Document: Field Groups (Posting Periods and Quantities)
Table - MLCR - Material Ledger Document: Currencies and Values
Table - MLCRF - Material Ledger Document: Field Groups (Currencies and Values)
Table - MLCRP - Material Ledger Document: Price Change (Currencies, Prices)
Table - MLMST - Material Ledger Document: Costing Run Header Data
Regards,
GK
SAP

Tables used for material ledger

What are the standard tables used for material ledger

Hi,
All req. configuration i have defined in last thread...
The following tables contain data that can appear in the material ledger documents:
·        MLHD      Material Ledger Document: Header
·        MLIT Material Ledger Document: Items
·        MLPP      Material Ledger Document: Posting Periods and Quantities
·        MLPPF    Material Ledger Document: Field Groups (Posting Periods and Quantities)
·        MLCR      Material Ledger Document: Currencies and Values
·        MLCRF    Material Ledger Document: Field Groups (Currencies and Values)
·        MLCRP    Material Ledger Document: Price Change (Currencies, Prices)
·        MLMST    Material Ledger Document: Costing Run Header Data
The following types of material ledger documents are available, differing by transaction type:
·        CL     Material Ledger Closing Entries
·        UP    Material Ledger Update
·        PC    Price Changes
·        ST     Single-Level Price Determination
·        MS    Multilevel Price Determination
·        RE    Material Ledger Data Repairs
USE :
Material ledger documents are data that is recorded during each business transaction that is relevant to valuation. You can archive documents for closed periods when they are no longer needed for material price determination or reporting purposes. Archiving the documents deletes them from the database.
Regards,
Priyanka.P
PLS AWARD IF HELPFULL
Edited by: Priyanka Paltanwale on Aug 7, 2008 9:34 AM

Canceling Material Ledger

Hi all,
I need to understand better which are the consequences in material ledger canceling procedure described in the following SAP notes:
SAP Note 108374 - Canceling material ledger production startup
SAP Note 425487 - Deactivating the material ledger in production systems
In particular I'm intrerested in which are the tables anda data involved by the deleting procedure.
My goal is the subsiquent reactivation of the material ledger in a multiple valuation scenario as described in the SAP note:
SAP Note 120380 - Subsequent activation of multiple valuation approaches
Thanks in advance for your cooperation.
Best regards, ALDO26X1

The following tables contain data that can appear in the material ledger documents:
· MLHD Material Ledger Document: Header
· MLIT Material Ledger Document: Items
· MLPP Material Ledger Document: Posting Periods and Quantities
· MLPPF Material Ledger Document: Field Groups (Posting Periods and Quantities)
· MLCR Material Ledger Document: Currencies and Values
· MLCRF Material Ledger Document: Field Groups (Currencies and Values)
· MLCRP Material Ledger Document: Price Change (Currencies, Prices)
· MLMST Material Ledger Document: Costing Run Header Data
The following types of material ledger documents are available, differing by transaction type:
· CL Material Ledger Closing Entries
· UP Material Ledger Update
· PC Price Changes
· ST Single-Level Price Determination
· MS Multilevel Price Determination
· RE Material Ledger Data Repairs
USE :
Material ledger documents are data that is recorded during each business transaction that is relevant to valuation. You can archive documents for closed periods when they are no longer needed for material price determination or reporting purposes. Archiving the documents deletes them from the database.

Material Ledger -- WIP values

Hi,
We have material ledger functionality active and want to extract the WIP values based on the Production Order. Currently we are executing transaction Code CKMLWIPDISP for viewing the WIP details and the values in object currency and controlling area currency are appearing. We want to know the table which provides the above details
Can anybody suggest the table which will provide us the WIP values based on the Production corder incase if the material ledger active.
Regards,
Shree.
Edited by: Shree Ja on Nov 18, 2010 10:19 AM

Hello Shree,
Some more tables
CKMLCRWIP                      Material Ledger: WIP Period Records (Values)
CKMLLACRWIP                    ML Activity Types: Period/ Currency Records WIP
CKMLLAPPWIP                    Ml Activity Types: Period Records WIP (Quantitie
CKMLMV004WIP                   Process Model: Deductions WIP
CKMLPPWIP                      Material-Ledger: Period Records WIP (Quantities)
CKMLWIPCUST                    Customizing: WIP To Actual
As told earlier I'm not in a position to verify since there are no records in the current system.
Kind Regards // Shaubhik

Dump when execute MMPV (Material Ledger is actived)

Hi experts,
This is my scenario:
- We are testing in a Development system (No productive system)
- Material Ledger is actived since 12-2011
- No Material Ledger period end closing made in 12-2011
When we execute MMPV the system shows the dump: SAPSQL_ARRAY_INSERT_DUPREC
We applied the sap note: 1123034 - MMPV: SAPSQL_ARRAY_INSERT_DUPREC error in SAPLMLCCS, but the dump continues.
I checked the table ckmlkev and I saw registers to Company Code 0200 Period 2 and Year 2012, however if I check OMSY transaction, I saw only Company Code 0200 Period 1 and Year 2012.
There is something extra to do?
Thanks in advance for your help,
José Luis

Hi,
This short dump is produced when the system tries to insert a new
entry in table CKMLKEV but a duplicate entry already exists in the same
table.
CKMLKEV indicates in which period which cost component structure is
used for the actual cost component split. CKMLKEV entries are created
by MMPV. Their existance for these periods indicates that the period was
shifted already by MMPV.
What you can do now is the following: please check the period
status in ML.
If the status is undefined, then delete the CKMLKEV entry and re-run
MMPV.
If the status is period opened (or higher), then you have to reset
the MM period.
Best Regards,
Arminda Jack

Standard Price in Material Ledger

Dear Gurus,
On one hand we need to update on finished products (manufactured) a standard cost estimate (CK11N or CK40N) in order to analyse variances on the corresponding production orders (during period en closing with KKS2 transaction), on another hand, because we are implementing material ledger component, we would like to update the standard price of these finished products with the periodic unit price (PUP) with CKME transaction.
The problem is that the system returns an error when we try to release the price with the PUP,
CKPRCH "A current or future standard price exists for material &".
Could you help me ? Thank you very much
Christophe

Hi
I suspect standard price can only be saved once for any period. You can make use of the other price fields in the material master to store different prices
Thank You,

How the System calculate GR/IR Prices in Material Ledger

Dear All,
Please any body help me regarding: How the prices calculation happen during the Goods Rereipt (GR) & Invoice Receipt (IR) prices in Material Ledger same period and next period. Exampls as follows,
If one material GR happened February, 2011 with Rs 100/- and IR happened March, 2011 with Rs 110/-. This difference Rs 10/- how it will be effected in during the two periods.
What will be impact of both periods if runs Material execution at end of the month. For March, 2011 how the material prices calculated & what basis.
Plese help me with above example.
Regards
Bhaskar.

Hi Bhaskar ,
At the time of GR .. in standard costing .. the accounting entries are
Inventory   -
Dr 100 ( Std Price)
Price Diff         -
Dr      10
GR/IR -
Cr 110 ( Invoice Price)
At the time of IR .. the entry is
Gr/IR -
Dr   110
Vendor -
Cr 110 .
Hence , the price difference is taken in accounting and in ML run in the month GR happens....................
Now , how ML run post the amounts in GL and account determination logic.. refer OSS Note : 908737 - Post Closing in Material Ledger
Regards
Sarada

Material Ledger Periodic Price

Similar Messages

Maybe you are looking for