MATERIAL_MAINTAIN_DARK background
Hi ,
I want to use mass update , for material in back ground. If i use the FM 'MATERIAL_MAINTAIN_DARK'. I will not have any return parameters. Is there any place where , i can get the update log. or any other way to get the update details.
jaffer vali shaik
Hi Suresh,
I know that there are return parameters , But i want to execute this FM in <b>background</b> . In Background we can not access any of these return or import parameters.
jaffer vali shaik
Similar Messages
-
MATERIAL_MAINTAIN_DARK via dialog
Hello everyone,
I'm trying to use <b>MATERIAL_MAINTAIN_DARK</b> to create/change a material master record with data coming from a MATMAS idoc in <b>foreground(dialog mode)</b>, thus allowing the user to see the fields populated with the data, but so far I haven't been able to put it to work.
Does anyone knows how to do it?
I'm currently working with 4.0B
Thanks in advance,
Tiago.Hi Tiago,
The purpose of MATERIAL_MAINTAIN_DARK is to create/change the material in background (atleast that is what I can understand from the function module documentation).
I think the fm that you can try is MATERIAL_BDCDATA (I am not sure if it exists in 40B, please check). If it exists then take a look at where-used list of the fm particularly at report RMMMBIM0.
MATERIAL_BDCDATA basically will prepare necessary screen logic for you and then you can do a CALL TRANSACTION in dialog mode to take the user into material master.
Hope this helps..
Sri -
MATERIAL_MAINTAIN_DARK Lock not funktion
Hallo
I am working with MATERIAL_MAINTAIN_DARK every thing is working ok. Only it not locking the Transaction
which I have given in Tcode. Can some tell me about it.
Thanks a lotHi Suresh,
I know that there are return parameters , But i want to execute this FM in <b>background</b> . In Background we can not access any of these return or import parameters.
jaffer vali shaik -
How to give Common Background color for all JPanels in My Swing application
Hi All,
I am developing a swing application using The Swing Application Framework(SAF)(JSR 296). I this application i have multiple JPanel's embedded in a JTabbedPane. In this way i have three JTabbedPane embedded in a JFrame.
Now is there any way to set a common background color for the all the JPanel's available in the application??
I have tried using UIManager.put("Panel.background",new Color.PINK);. But it did not work.
Also let me know if SAF has some inbuilt method or way to do this.
Your inputs are valuable.
Thanks in Advance,
Nishanth.CIt is not the fault of NetBeans' GUI builder, JPanels are opaque by default, I mean whether you use Netbeans or not.Thank you!
I stand corrected (which is short for +"I jumped red-eyed on my feet and rushed to create an SSCCE to demonstrate that JPanels are... mmm... oh well, they are opaque by default... ;-[]"+)
NetBeans's definitely innocent then, and indeed using it would be an advantage (ctrl-click all JPanels in a form and edit the common opaque property to false) over manually coding
To handle this it would be better idea to make a subclass of JPanel and override isOpaque() to return false. Then use this 'Trasparent Panel' for all the panels where ever transparency is required.I beg to differ. From a design standpoint, I'd find it terrible (in the pejorative sense of the word) to design a subclass to inconsistently override a getter whereas the standard API already exposes the property (both get and set) for what it's meant: specify whether the panel is opaque.
Leveraging this subclass would mean changing all lines where a would-be-transparent JPanel is currently instantiated, and instantiate the subclass instead.
If you're editing all such lines anyway, you might as well change the explicit new JPanel() for a call to a factory method createTransparentJPanel(); this latter could, at the programmer's discretion, implement transparency whichever way makes the programmer's life easier (subclass if he pleases, although that makes me shudder, or simply call thePanel.setOpaque(false) before returning the panel). That way the "transparency" code is centralized in a single easy to maintain location.
I had to read the code for that latter's UI classes to find out the keys to use (+Panel.background+, Label.foreground, etc.), as I happened to not find this info in an authoritative document - I see that you seem to know thoses keys, may I ask you where you got them from?
One of best utilities I got from this forum, written by camickr makes getting these keys and their values very easy. You can get it from his blog [(->link)|http://tips4java.wordpress.com/2008/10/09/uimanager-defaults/]
Definitely. I bit a pair of knucles off when discovered it monthes after cumbersomely traversing the BasicL&F code...
Still, it is a matter-of-fact approach (and this time I don't mean that to sound pejorative), that works if you can test the result for a given JDK version and L&F, but doesn't guarantee that these keys are there to stand - an observation, but not a specification.
Thanks TBM for highlighting this blog entry, that's the best keys list device I have found so far, but the questions still holds as to what specifies the keys.
Edited by: jduprez on Feb 15, 2010 10:07 AM -
Closing the Background report engine
I use a menu that can call several reports, and when they open, the Reports Background Engine runs. I understand why it is useful to keep this open while the main app is on, but it does not close out automatically when the app closes. Is there a command that will do this?
Thanks,
SaraI Guess,
Add_Parameter(pl_id, 'ORACLE_SHUTDOWN', TEXT_PARAMETER, 'YES') will do (pl_id is the parameter list that you must have created to run each individual report) -
Report program when run in background job getting cancelled immediately
Hi
When i run a program in foreground i am able to see the output. But when run in background not able to run the job successfully. The job is getting cancelled immediately.
I am using the below function module for output display. Should i need to pass any parameters in the below function module so that i can run the program in background successfully.
CALL METHOD DETAIL_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
IS_LAYOUT = IS_LAYOUT
I_SAVE = 'A'
IS_VARIANT = GS_VARIANT
CHANGING
IT_FIELDCATALOG = IT_FIELDCATALOG
IT_OUTTAB = BLOCKED_STOCK_TAB_ALV[].
Please suggest.
Thanks and regards
Rajani YeluriHi Rajani.
ALV require the DRYPOR(screen) for display but incase you run in back ground which have to write to spool but in spool we can only write in format of LIST REPORT not inter-active report like ALV. That why
system cancelled your process immediately.
Hope it helps.
Sayan. -
Layout variant is not working in background in ALV report
Hi,
I have one LAV report to send the report output through mail in foreground and backgroud.Final internal table is having 46 fileds to display the output.But here user is saving the layout variant and sending that layout variant output to mail id in excel format with zip file.Its working in foreground.But in background its not working.Even if we select the layout variant,its sending all the 46 fileds to mail.
here we have used the below FM to update the fieldcat itab.
CALL FUNCTION 'REUSE_ALV_GRID_LAYOUT_INFO_GET'
IMPORTING
et_fieldcat = it_fieldcat[]
es_variant = v_disvariant
EXCEPTIONS
no_infos = 1
program_error = 2
OTHERS = 3.
In for ground NO_OUT = 'x' for non selected fields and NO_OUT = ' ' for selected fields.
But in background NO_OUT = ' ' for all the fileds, even if we select the layout variant.
Please suggest me with the solution.
Regards,
Jayaramhi ,
Do according to this
SORT t_ekbe by belnr.
if t_ekbe[] is not initial .
SELECT MBLNR
BWART
SMBLN
ERFMG " This is the new added field
erfme " This is the new added field
INTO CORRESPONDING FIELDS OF TABLE t_mseg
for all entries in t_ekbe
from mseg
where mblnr = t_ekbe-belnr
AND bwart = '101'.
endif.
after this
loop at t_ekbe .
loop at t_mseg where mblnr = t_ekbe-belnr .
t_ekbe-ERFMG = t_mseg-ERFMG .
t_ekbe-erfme = t_mseg-erfme .
modify t_ekbe transporting ERFMG erfme .
clear t_mseg .
endloop.
clear t_ekbe .
endloop.
Regards
Deepak . -
Problems creating background job for program (job open, submit and close)
Hi gurus,
im trying to start a background job using the FM BP_START_DATE_EDITOR to show the start date to the job or if it's imediate. this FM it's working fine, after call it im opening a job, submiting it and call the job close FM and the job close FM creates me the job.
The problem it's when i go to the sm37 to see the job status the job has been canceled, and the job log says that i have to give a start date to the job.
What i dont understand it's either the job is imediate or i choose a date to start the job always gives me this error...
Below goes my code,
any ideas will be rewarded
CLEAR: stdt_modify_type, stdt_output.
CALL FUNCTION 'BP_START_DATE_EDITOR'
EXPORTING
stdt_dialog = 'Y'
stdt_input = stdt_input
stdt_opcode = 14
IMPORTING
stdt_modify_type = stdt_modify_type
stdt_output = stdt_output
EXCEPTIONS
fcal_id_not_defined = 1
incomplete_last_startdate = 2
incomplete_startdate = 3
invalid_dialog_type = 4
invalid_eventid = 5
invalid_opcode = 6
invalid_opmode_name = 7
invalid_periodbehaviour = 8
invalid_predecessor_jobname = 9
last_startdate_in_the_past = 10
no_period_data_given = 11
no_startdate_given = 12
period_and_predjob_no_way = 13
period_too_small_for_limit = 14
predecessor_jobname_not_unique = 15
startdate_interval_too_large = 16
startdate_in_the_past = 17
startdate_is_a_holiday = 18
startdate_out_of_fcal_range = 19
stdt_before_holiday_in_past = 20
unknown_fcal_error_occured = 21
no_workday_nr_given = 22
invalid_workday_countdir = 23
invalid_workday_nr = 24
notbefore_stdt_missing = 25
workday_starttime_missing = 26
no_eventid_given = 27
OTHERS = 28.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
MOVE 'X' TO gv_flag.
ENDIF.
DATA jobname LIKE tbtcjob-jobname.
DATA jobcount LIKE tbtcjob-jobcount.
DATA job_release LIKE btch0000-char1.
DATA job_imediate TYPE c.
CLEAR: jobname, jobcount, job_release.
CONCATENATE 'MAPAEXEC' sy-uname sy-datum
INTO jobname SEPARATED BY space.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = jobname
IMPORTING
jobcount = jobcount
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE i003(zmapas).
EXIT.
ENDIF.
SUBMIT z_mapa_execucao_orcamental
VIA JOB jobname NUMBER jobcount
WITH ano EQ ano
WITH so_perio IN so_perio
WITH so_date IN so_date
WITH so_org EQ so_org
WITH so_num IN so_num
AND RETURN.
IF stdt_output-startdttyp EQ 'I'.
CLEAR job_imediate.
job_imediate = 'X'.
ENDIF.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
calendar_id = stdt_output-calendarid
event_id = stdt_output-eventid
event_param = stdt_output-eventparm
event_periodic = stdt_output-periodic "?
jobcount = jobcount
jobname = jobname
laststrtdt = stdt_output-laststrtdt
laststrttm = stdt_output-laststrttm
prddays = stdt_output-prddays "??
prdhours = stdt_output-prdhours "?
prdmins = stdt_output-prdmins "??
prdmonths = stdt_output-prdmonths
prdweeks = stdt_output-prdweeks "?
predjob_checkstat = stdt_output-checkstat
pred_jobcount = stdt_output-predjobcnt
pred_jobname = stdt_output-predjob
sdlstrtdt = stdt_output-sdlstrtdt
sdlstrttm = stdt_output-sdlstrttm
strtimmed = job_imediate
targetsystem = stdt_output-instname
start_on_workday_not_before = stdt_output-notbefore
start_on_workday_nr = stdt_output-wdayno
workday_count_direction = stdt_output-wdaycdir
IMPORTING
job_was_released = job_release
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE i003(zmapas).
EXIT.
ELSE.
MESSAGE i004(zmapas) WITH jobname.
ENDIF.
Thanks in advance,
Best Regards
João MartinsHello João.
In debug mode, check the value of variables you passed to parameters sdlstrtdt and sdlstrttm.
As aditional info, I usually achieve your goal without FM BP_START_DATE_EDITOR.
Check this code:
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = w_jobname
IMPORTING
jobcount = w_jobcount
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
CHECK sy-subrc = 0.
CLEAR seltab_wa.
MOVE: t_jobs-param TO seltab_wa-selname,
t_processar-line+34 TO seltab_wa-low.
APPEND seltab_wa TO seltab.
seltab_wa-selname = 'P_LOJA'.
seltab_wa-low = t_processar-ficheiro+7(4).
APPEND seltab_wa TO seltab.
*** Submete o programa para o JOB
SUBMIT (t_jobs-repid)
WITH SELECTION-TABLE seltab
USER sy-uname
VIA JOB w_jobname NUMBER w_jobcount
AND RETURN.
*** Encerra o JOB
l_hora = sy-uzeit.
ADD 60 TO l_hora.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = w_jobcount
jobname = w_jobname
sdlstrtdt = sy-datum
sdlstrttm = l_hora
targetserver = w_servidor
IMPORTING
job_was_released = l_liberado
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
OTHERS = 8.
Regards.
Valter Oliveira. -
Hi,
We can schedule the programs or transactions in background through SM36 and we can see the status through SM37.Then what is the use of FM's JOb_open,Job_submit and Job_close.When we will use these FM's.
Can anybody tell me the difference between these two methods for scheduling the jobs in background....with sample code if possible
Thanks & Regards,
Rakesh.hi,
chk this,
call funcatio.
****Open a job to submit the Post Program into
call function 'JOB_OPEN'
exporting
jobname = jobname
importing
jobcount = jobcount
exceptions
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
others = 4.
if sy-subrc 0.
raise job_open_failed.
endif.
submit zefu_currency_load_callbak_ack
via job jobname
number jobcount
with com_num = com_num
with relay_nu = relay_num
and return.
if sy-subrc 0.
raise job_step_failed.
endif.
****Close the Job and start it immediately
call function 'JOB_CLOSE'
exporting
jobcount = jobcount
jobname = jobname
strtimmed = 'X'
exceptions
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
others = 8.
if sy-subrc 0.
raise job_close_failed.
endif.
Also,
Create a Variant for the Program and
Schedule JOB in background:
Go to SM36 create a Job
enter Program and Variant for that program in STEP..
click on Start Condition
Click on DATE and TIME enter date scheduled Start and END times
click on Period Values
Click on HOURLY/WEEKLY etc
CLick on RESTRICTIONS also to use further criteria.
so your job will be scheduled and run as per your requirement.
and in SM37 Transaction check the status of that JOB
Check this link for scheduling jobs..
http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/3a7f87505211d189550000e829fbbd/content.htm
You can also use the fun modules JOB_OPEN,JOB_CLOSE etc for job
scheduling.
hope this helps.
regs,
hema. -
Running a report in Background
Hi Guys,
I am designing a ALV report.
This report have option in the selection screen, to run immediately or Background.
I am using JOB_OPEN, JOB_SUBMIT and JOB_CLOSE FM's.
My doubt is at which point I have to use these FM's.
Immediately in START-OF-SELECTION ?
If this is the case, I can write rest of my code after JOB_CLOSE FM.. Right ?.
ThanksHi Naresh,
Thanks for the reply.
My doubt is, can I use these FM's in the report itself, or I have to write separate program for this ?
If I can use in the same report, where exactly i can use it.
For example.
I have form to print ALV - GENERATE_ALV and send email - SEND_MAIL.
do I use like this.
start-of-selection.
JOB_OPEN..
JOB_SUBMIT..
JOB_CLOSE..
GENERATE_ALV
SEND_MAIL
Thanks -
dear experts,
i am using these code to schedule a program to run in background
export 'value' to memory id 'table'.
call function job_open.
submit 'zprogram' via job job_name number job_number and return.
call function job_close.
in program 'zprogram' i have used the syntax
import so_input from memory id 'table'.
in event initialization.
but i thin data is not importing in called program using import statement. can anyone suggest me how to schedule it properly.
is there any problem in my code??
Edited by: shekharamit on Jul 20, 2010 6:53 AMYour export statement:
export 'value' to memory id 'table'.
and your IMPORT statement:
import so_input from memory id 'table'.
Don't you think there is definitely some problem with this. Read the F1 help & figure it out yourself.
BR,
Suhas -
To delay a program submitted in background from another transaction.
Hi All,
There are 2 programs 'A' and 'B' . During execution of 'A' , 'B' is called and submitted in background using FM Job_open & Job_close and submit query.
My requirement is to Delay the Program 'B' by 2-3 mins without delaying Program 'A' .
I tried using FM JOB_OPEN export condition sdlstrttm = w_starttm but was of no help.
I also tried using statement wait up to 120 seconds but this also makes wait to program 'A'.
Please suggest solutions to this.
Regards,
NibhaHi Prashant,
I am not able to understand ur suggestion.
My piece of code is
call function 'JOB_OPEN'
exporting
jobname = 'YI90C_BG'
sdlstrtdt = w_startdt
sdlstrttm = w_starttm
importing
jobcount = job_count
exceptions
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
others = 4.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
if sy-subrc = 0.
submit ympic_source_list_contr_upload
with selection-table it_selcr
and return
via job 'YI90C_BG'
number job_count.
if sy-subrc = 0.
call function 'JOB_CLOSE'
exporting
jobcount = job_count
jobname = 'YI90C_BG'
strtimmed = 'X'
importing
job_was_released = w_status
exceptions
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
others = 8.
endif.
endif.
Please tell what changes should I make?
Regards,
Nibha -
Scheduling one background job inside another
Hi All,
Is it possible to Scheduling one background job inside another.? i.e In my Z program I am calling job_open, job_submit, job_close and to execute one standard report in background. And after that I am executing my Z program itself from SE38 as Program->Execute->Background->Execute Immediately. Is this logically correct? I am asking this because I am not getting the desired result
Thanks & Regards,
Neethu.HI,
Check the job steps in SM36.
First schedule the Standard job and in the job steps schedule the z report.
Schedule job in chain -
Hi all,
I am trying to create a background job in a program using FMs JOB_OPEN,JOB_SUBMIT .... and dont want the job to be executed immediately , but the user should go to SM37 and schedule the job for the job name created by the above program.
How do i achieve this. PLs help with your ideas.
Thanks,
Stockstock sys,
Scheduling Background Jobs:
1. Background jobs are scheduled by Basis administrators using transaction SM36.
2. To run a report in a background, a job needs to be created with a step using the report name
and a variant for selection parameters. It is recommended to create a separate variant for each
scheduled job to produce results for specific dates (e.g. previous month) or organizational units (e.g.
company codes).
3. While defining the step, the spool parameters needs to be specified
(Step-> Print Specifications->Properties) to secure the output of the report and help authorized users
to find the spool request. The following parameters needs to be maintained:
a. Time of printing: set to Send to SAP spooler Only for now
b. Name abbreviated name to identify the job output
c. Title free form description for the report output
d. Authorization a value defined by Security in user profiles to allow those users to access
this spool request (authorization object S_SPO_ACT, value SPOAUTH). Only users with matching
authorization value in their profiles will be able to see the output.
e. Department set to appropriate department/functional area name. This field can be used in
a search later.
f. Retention period set to Do not delete if the report output needs to be retained for more
than 8 days. Once the archiving/document repository solution is in place the spool requests could
be automatically moved to the archive/repository. Storage Mode parameter on the same screen
could be used to immediately send the output to archive instead of creating a spool request.
Configuring user access:
1. To access a report output created by a background job, a user must have at
least access to SP01 (Spool requests) transaction without restriction on the user
name (however by itself it will not let the user to see all spool requests). To have
that access the user must have S_ADMI_FCD authorization object in the profile with
SPOR (or SP01) value of S_ADMI_FCD parameter (maintained by Security).
2. To access a particular jobs output in the spool, the user must have
S_SPO_ACT object in the profile with SPOAUTH parameter matching the value used
in the Print Specifications of the job (see p. 3.d above).
3. Levels of access to the spool (display, print once, reprint, download, etc) are
controlled by SPOACTION parameter of S_SPO_ACT. The user must have at least
BASE access (display).
On-line reports:
1. Exactly the same configuration can be maintained for any output produced
from R/3. If a user clicks Parameters button on a SAP Printer selection dialog, it
allows to specify all the parameters as described in p. 3 of
Scheduling background jobs section. Thus any output created by an online report
can be saved and accessed by any user authorized to access that spool request
(access restriction provided by the Authorization field of the spool request
attributes, see p. 3.d of Scheduling background jobs section).
Access to reports output:
1. A user that had proper access (see Configuring user access above) can
retrieve a job/report output through transaction SP01.
2. The selection screen can be configured by clicking Further selection
criteria button (e.g. to bring Spool request name (suffix 2) field or hide other
fields).
3. The following fields can be used to search for a specific output (Note that
Created By must be blank when searching for scheduled jobs outputs)
a. Spool request name (suffix 2) corresponds to a spool name in p. 3.b in
Scheduling background jobs section above).
b. Date created to find an output of a job that ran within a certain date range.
c. Title corresponds to spool Title in p. 3.c in Scheduling background jobs
section above).
d. Department - corresponds to spool Department in p. 3.e in Scheduling
background jobs section above).
4. Upon entering selection criteria, the user clicks the Execute button to
retrieve the list of matching spool requests.
5. From the spool list the user can use several function such as view the
content of a spool request, print the spool request, view attributed of the spool
request, etc. (some functions may need special authorization, see p.3 in
Configuring user access)
a. Click the Print button to print the spool request with the default attributes
(usually defined with the job definition). It will print it on a printer that was
specified when a job was created.
b. Click the Print with changed attributed button to print the spool request
with the different attributes (e.g. changing the printer name).
c. Click the Display contents button to preview the spool request contents. A
Print and Download functions are available from the preview mode.
Don't forget to reward if useful -
Hi, I am calling a Background job in my program. I am using JOB_OPEN, JOB_SUBMIT and JOB_CLOSE FM to start a job. My need is to pass a value to the job program(job program doesnt have any selection screen values). Is their any way without creating variants each time to pass value to it.
Please advice.....Hello,
You can first use JOB_OPEN which returns job number. Then build ranges or parameters to use SUBMIT to call the program.
Eg: SUBMIT RM06BB20 AND RETURN
WITH S_EKGRP IN R_EKGRP
WITH S_EKORG IN R_EKORG
WITH S_FLIEF IN R_FLIEF
WITH S_KONNR IN R_KONNR
USER sy-uname VIA JOB w_jobname
NUMBER w_job_number.
Now use JOB_CLOSE.
Thanks,
Venu
Maybe you are looking for
-
Please help. AE Card/MacPro, can no longer see any networks.
even surrounding networks. I've done everything, removed key files in my /lib/prefs folder. Hard reset the AP card, SMC reset, Blown away "locations" etc... still no good. I don't keep track of all the updates so I'm wondering if recently there was a
-
IPod - Possible Hard Drive Problem
My iPod is no longer syncing, it comes up with erros when I try to sync. I suspect the hard drive is bad. I have done a restore (it didn't work until I formatted the disk in Windows), and this has not solved the problem. I ran the diag mode and it ca
-
ORACLE 8.1.6 on Redhat 6.2 SIGSEGV problem
Hi! I have the same problem which others have too but I could not find any solution. The starnge is that I have two machine with redhat 6.2 (not the same kernel anyway) and then installer on one is works fine but doesn't on the other. Brand new insta
-
Low resolution on external monitor using Kernel 2.6.39
First of all, I don't if this is the right place to post this thread because it involves a kernel from the AUR, but, as that kernel is the same version as the one from [testing] I thought it would be a good place. Furthermore, the thread involving in
-
Hi, I m using Jdeveloper 11 g. My requirement is to refresh(clear the cache) Vo Iterator on page load. For that I tried Vo Object. 1. ViewObject iterator = ((DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry