Material Master add Accounting tab

Hi:
I have a problem with material master, I hope you could help me. I have create a material in a plant as copy of a existing material/plant. The old data has no accounting tab, but in new data, I need it.
Is it possible to add accounting tab in Material Master? Or is better delete material and create a new one?
Thanks in advance for your response.

Hi Mario,
Go to MM50 Trxn code and Give Maintenance Status as B and Created Date and execute. It will show you all the material created as per the said date and select your material and click on maintain materials and it will show you only accounting view.
Now give the Accounting data and save. Normally this process is used for Mass changes.
You can also use MM01 trxn code to extend.
Reg,
Ashok
Assign points if useful.

Similar Messages

  • In material master costing 1 tab i want to maintain by default as origin

    Hello,
    i want to maintain in material master costing 1 tab  by default material orgin field has been check where  i do these settings to mainatin
    sudarshan

    hello Vijay
    this shoulb be applicable for all materials and when i creating the material master the field material orging should be selected as default where i can do these settings to get as default in Material master
    Thanks in advance for your reply
    sudarshan.

  • I cant seem to add an email account. my "add account" tab cannot be tap, advices?

    one fine day, i wanted to add another email account to my ipad 2 but the "add account" tab is faded so i couldnt tab on it, so is my other email accunts tab!
    is there something that i should open or close within my ipad to add a new account?

    Thank you very much! Actually I have my restrictions off on the adding of email account but I am not sue why the tabs are still faded. Thus I went to switch it on n off again and now it works! Thanks again!

  • Material Master, Warehouse mgmt2 tab, Issue in change in LE quantity

    In the Material Master, in Warehouse mgmt2 tab, When I have tried to change the LE quantity in Palletization data section.
    to 1763.68 lbs, it's not take 1763.68, but taking 1763.681.
    Whenever I put the data with 2 decimal point, it take 3'rd digit also which is 1.
    So a small difference of 0.001 is occuring.
    How can we rectified this issue ?

    Ya, Base unit is KG and WM unit is LB.
    But in my issue, I am entering the quantity in the unit of LB.
    i.e. if I am entering 1763.92 then it is in LB .
    So I think conversion factor should not play any role in this case.

  • Price Control Indicator in Material Master Record (Accounting View1)

    Hi,
    Is there any way to make the Standard Price (S) or Moving Average Price (V) automatically SET in Material Master Record? So that everytime we create a material, there will be no need to enter which price we prefer.

    Hi,
    Go to OMS2. select material type- goto detail- Tick 'Price control Mandatory".
    Also if you maintain "ext pro allowed i,e,2" ,system will pick price control V automatically.
    For price control S, maintain Int proc allowed as 2.
    Regards,
    Piyush
    Edited by: Piyush Mishra on Jul 20, 2010 9:06 AM

  • Account assignment group is different in Intercompany Billing from Material Master

    Hello,
    Account assignment group is different in Intercompany Billing from Material Master.
    Account assignment group in Billing and Intercompany Billing is feched from Material Master.
    In Material Master, account assignment group is assigned as 12.
    In Billing, account assignment group is 12 but in Intercompany Billing, account assignment group is 13.
    Please help me to understand why in Intercompany Billing, account assignment group is 13.
    Best Regards,
    Debashri Dutta

    Check the table MVKE for the values maintained for field KTGRM. You can see the sales org-DC combinations for which the AAG is maintained as 13 for this material. This may give you clues for investigation.

  • Maximum number of fields in material master

    Hi,
    Could you please help to understand how many fields can be added in material master Tab.
    Example - If we create new material master tab as additional data and would like to add some fileds in that tab, is there a limit we can't add more than certain number of fields.
    Please advise how many cloumns can be added as well in one tab.
    Example
    Material master additional data Tab (New)
    feild 1 description field 4 description field 7 ......
    field 2 description field 5 description field 8 ......
    field3 description field6 description field 9 ........
    I think the fields should be assigned to feild selection group which is reserved as for Z fields
    Please confirm if my understanding correct for Z fileds
    211-240 Reserved for customers
    As I think only 20 field can be assigned to field selection group but My question is can we assign more than one filed selection group to one material master tab. I mean to increase the number of field to be added in new additional data tab can we add 111-120 Reserved for customers and 211-240 Reserved for customers to one material master additional data tab.
    Thanks

    Hi,
    For add fields to material master, check Note 44410 - Integrating cust.-specific fields in matl master (and related notes).
    Other note useful to understand the range of customer names in SAP: SAP Note 16466 - Customer name range for SAP objects.
    I hope this helps you. If you need something else, let me know.
    Regards,
    Eduardo

  • New Text in the Sales Text View in the Material Master

    Hi All,
    I want to create new text ID in the material master sales text tab
    Can you please help me in how to create the new text for material master sales text tab view.
    Regards
    Rajesh

    Well it may not be possible by standard SAP to create in Material.
    AN alternative might be to use a standard text type and then call it in your Text Determination Procedure.
    T-code "SO10" --> Give "Text Name  & Text ID & Language --> Click at "Create" --> On next screen --> Go to (Menu) --> change editor --> Write the text which you want
    Go to VOTXN , and maintain the required confirguation to get this standard Text copied to the material during order processing.
    Regards
    Sai
    Edited by: Sai on Apr 16, 2010 1:39 PM

  • Material master-additonal unit of measurement

    HI, I have three questions
    a) we have the follwoing data defined in material master (additonal data)
    X UOM Y UOM EAN
    1 LITRES 1 LITRES NIL
    1 IGB (inner packg) 20 LITRES 345922222222
    1 GBE (packg) 20 LITRES 345922222222
    I need to know what is EAN no and in our case the EAN no is same for both inner packg and pack. . what does this mean. Sometimes we also see the EAN no is different. why... what it signifies ?
    2) We have outbound idoc trigerred from delivery. message type is WHSOD. in one of the segments (E1EDL24), the system shows the delivery qty and material no. This segment also shows the EAN NO AS 345922222222. In segment E1EDL26, the filed UMVKZ shows as 1 which is ok (numerator as shown above) but the numerator field shows 1 only (it does not show 20 litres,, i think the field name is UB something ).
    I need to know why the system is not showing 20 litres in numerator in the filed for segment E1EDL26.
    3) Had we have two different EAN in material master as above, did our standard message type would have shown the conversion factors (numerator and denomi ) as per the EAN nos.....If yes, then in which segments ,the WHSORD shows the Conversion factors based on different EAN nos in material master-UOM tab (for instance if 1 GBE (packg) = 30 LITRES and EAN IS 345911111111.... I think there will be as many segments in idoc as there are entries in Additonal data-UOM tab )
    rgds
    pamela

    Hi Jurgen,
    I think you did not understand. My questions is as follows.
    a) why we maintain alternative UOM in material  mastr (additional data) ? an example ould be good.
    b) We have in our system base unit of masuement as  litres and sales unit as blank. that means system will take sales unit of measurementt as litres only.
    now we make sales order and make delivery and a outbound whsord idoc is sent to third party warehouse. the third party warehouse undertsands only IGB(pack ) unit of measure wherase our idoc i think will carry LT (litres ) as UOM...
    we do maintain the conversion factor between litres and IGB in our material master (additional data tab).That is our idoc shud carry conevrsion factor as maintained in ur material maste ( 20litres =1 igb ). so our idoc shud carry .05 as conversion factor
    so that our third party warehouse understands that and dispatch 1 IGB of qty (2 litres as per our delivery )
    rgds
    Pamela
    Edited by: Pamela79 on Aug 11, 2011 4:49 AM

  • Moving average price in material master

    Dear All,
    M client is in  manufacturing process(variant configuration) having make to order scenario (Non-Valuated).
    We are having steel and ring business, For Steel business we are producing in house/subcontracting and  For Ring we are sending Raw material/Semi-finished goods to Sub-contractor for which he is charging processing charges. Raw material/SFG(semi-finished goods) provided to subcontractor is SFG for steel business.
    We are doing movement type 912 E for sending goods for subcontracting (sales order is attached) and while doing G/R through MIGO processing charges are debited and credit goes to gr/ir account,Upto this point I am ok with costing as visible from sales order analysis(KKAC).
    Now In our scenario if out of 6000 rings (as defined in sales order)customer is rejecting 1000 rings we have to detach that sales order through movement type 411 E and bring to our own stock or by movement type 412 E attach to another sales order .Also We are using 413 E movement type for transferring unsold goods to another sales order.
    In 411 E and 412 E movement types system takes moving average price (maintained originally ) and by using movement type 413 E no value is transferred only quantity is transferred (because of non-valuated scenario).
    Now if system picks original price maintained say at re.1 my costing for detached and attached sales order are incorrect .
    Example
    Material master(A) accounting view
    Map     1
    Stock     100               total value     100
    Sales order 1(10 tonnes)A (finished product)                    
    Cost     1000                              
    Revenue     800(5 tonnes)                         
    sales order 2
    cost b/f          5
    Revenue        800(5 tonnes)
    Now if 5 tonnes are detached from sales order it picks price from
    Master i.e Re.1 so Rs.5 is taken to own stock through mtype 411 E
    Or it takes Rs.5 to another sales order 2 as cost of 5 tonnes .
    Now my sales order 1 will show loss of Rs.195(995-800) and sales order2 shows profit of Rs.795.
    I want to know whether system is behaving correctly or some customization is to be done.
    Thanks and Regards
    Vijay
    Edited by: VIJAY MATLANI on Oct 13, 2008 5:28 AM
    Edited by: VIJAY MATLANI on Oct 13, 2008 5:30 AM

    Hey
    Check have you made any purchasing documents, with reference to material.
    And anybody played MR21 for the particular material?
    Thanks
    Raman

  • Multiple Country of Origin at a Material Master level- Foreign Trade import

    Hi Gurus,
    We have a requirement to store Multiple Country of origin at a Material Master level . One Part/Material is sourced from different vendors and they are manufactured in different countries . Please note that we are not using Batch Management . Is there any workaround to have this scenario without using standard Batch Management .
    Thanks,
    Prabuddha

    hi,
    you can use split valuation for this by using the valuation category field in material master in accounting 1 view.
    in this you have to maintain valuation category as "H" = ORIGIN.
    For split valution procedure you have to reffer the  follow this link.
    http://www.sap-img.com/mm025.htm
    THANKING YOU

  • How to change price determination form blank to 2 on the material master?

    Hi expert,
    I had a difficult problem:
    Material ledger is active in our company Normally, in material master data accounting view 1, we always set price determination 2 and price control V. Price determination 2 is set default if creating a material master by entering no price determination.
    Today, my Key user came accross a prblem: In our company, for batch processing of material master, we made a mistake that  price determination were set blank (neither 2 or 3, In MBEW table, field MLAST is blank) when inputting material master. all data were imported without error warnings. But ,acturally, all materials' price determination in accounting view 1 was set Blank! This is a big problem that we can not release standard price or do any other price changing~~~.
    I have used CKMM to try to change price determination. But it failed: it can not identify this situation because old price determination must be set a word rather than blank in CKMM.
    I don't know any other solutions to change price determination from Blank into 2.
    Hope you can help me out. Very thankful!

    Hello,
    I have the same problem with a type material, the material ledger is active but the price determination were set blank.
    I already checked the OMX1 transaction... and all configurations of ML and type material and apparently is ok.
    Has anyone knows the solution?
    (maybe with applying a program or SAP note).
    Please help.
    Regards,
    Eliana

  • Material define for shipping in material master.

    Hello,
    My client is used the trading goods process,they have to imports the goods.They want to define the material shipping as initial phase in material master,it has to come by sea or air,requirement is that they define the material in purchasing in material master so that it come in po that will change if material is come instead of sea or vice versa. Is there any possibility to define shipping in material master and this tab come in PO to change it.
    Please provide the solution how to solve this requirement.
    Regards
    Rahul

    Hi Rahul
    Material master is does not control route of the material where as vendor location does... explore the option of Purchasing info records ... I think Inco-Terms most frequently used to identify that material coming by Sea, rail or road etc
    I would not recommend to meet this requirement using material master.
    Thanks,
    Jagdeep

  • Material Master: where to maintain "SNP Demand" and "Deployment Profile" ?

    Hello experts,
    the APO material master has on tab "SNP 2" the section "SNP Demand Profile" and "SNP Deployment Profile". For my understanding such profiles allow you to assign the same settings to a lot of products simply using such profile which contain predefined settings.
    Does somebody know where / how I maintain (change, create, delete) such profiles. I was scanning master data and SNP section within customizing SPRO and the within APO application menu tree  under SNP and master data ... but couldn't find it.
    Regards
    Thomas
    Edited by: Thomas Schulze on Mar 10, 2011 2:53 PM

    Thomas
    Use the following tcodes
    /n/sapapo/snp101 - Demand prof
    /n/sapapo/snp102  - Supply
    /n/sapapo/snp111 - Deployment
    And yes you are right , if you look in menu path or SPRO you cant find these . Not sure why.
    Thanks
    Aparna
    Edited by: Aparna.Ranganathan on Mar 10, 2011 4:08 PM

  • Planned Delivery Time from Material Master instead of PIRs

    Hi SAP Gurus,
    Do you know if there is a way to have MRP look at the Planned Delivery Time from the Material Master (MRP 2 tab) instead of the PIR?
    We would like to create global PIRs with a PDT of 1 and have the Material Master PDT set to a different number (example 5).  So when MRP runs it will read 5 instead of 1.
    Any additional information is appreciated.
    Thank you
    -nic

    Hi Nicholas,
    In Standard SAP will consider Planned delivery time maintained in Inforecord and than time maintained in Material master. Inforecord has higher priority than material master. When a requisition is manually created, the Planned Delivery date will always be taken from the material master.
    For MRP you can make setting OMDT for your plant or MRP group to determine planned delivery time.
    Deactive the flag 'Scheduling according to purchasing info record or agreement' in Customizing (Plant or MRP group). and test the same.
    Regards,
    R.Brahmankar

Maybe you are looking for

  • Interference on display.

    I'm getting random interference patterns on the display. Sometimes an image will become distorted and have lines run through it. Has anyone had this problem? I've had this on iOS 4.2 &4.3 so I'm hesitant to say it's a software issue. These issues hav

  • How can I transfer Photos from my sd card to an IPad 2?

    I am a beginner at photography and have recently got a DSLR camera and I want to put my photos onto my Ipad 2 or IPhone 6. how would I be best doing this?

  • I have widows 7 and want to know how to open a port

    I want to open port 40 but cannot find out how.

  • Apache 2.0 and PHP 5

    Hello, I have a Customer who wants to develop an application with IAS 9.0.4. There should be an Integration of PHP 5 as Apache module mod_php (using the following PEAR packages) - DB - DB_LDAP - Auth - Config - File - Log - XML_Serializer and additio

  • Target moviclip in main timline

    I got to moviclips on the timeline (m1_mc, m2_mc), From the timeline of m1_mc I try to rotate moviclip m2_mc. The script given below. But it result in this error : 1119: Access of possibly undefined property m2_mc through a reference with static type