Material Master: All part numbers from one vendor

Hi everyone,
is it possible to list all part numbers supplied by a defined vendor - in the material master?
I was told by our purchasing department that ME2L would do the job, however I'm not authorized to execute the transaction (for no reasons) and our admin is on holidays ;-)
I'm sure a similar report must be available in another way...
Any suggestions?

Roman,
ME2L is the SAP standard listing of purchase orders by vendor; it is not necessarily a comprehensive list of 'all part numbers supplied by a defined vendor - in the material master'.
If, however, this is adequate for your purposes, you could try other standard Purchase order listing transactions:
ME2W, ME2M, ME2C, ME2N.
Assuming those transactions are not available to you, you might want to download the raw purchase orders from the tables using a table browser such as SE16N:
EKKO which contains the purchase order number and the vendor number
EKPO which contains the purchase order number and the material number.
Joining these two using desktop software would give you similar info that you would get from ME2L.
As I stated earlier, ME2L doesn't really meet the requirements you stated.  The listing that actually meets the requirements depends upon your company's business processes.  In some companies, that listing would have to come from the purchase info records.  Such a listing is available from ME1L and a few others.
Best Regards,
DB49

Similar Messages

  • Several payments from one vendor into one payment order

    Hello,
    I would combine payments from one vendor into one payment order.
    I found in XK03 there is a tab in payment tab to set the voice individual payment but I cannot change it since is not an editable field.
    see image
    How can I change this?
    I need to do this change as a massive change for all vendors for a company code.
    Can you help me, please?
    Thank You

    Yes, What Harnish says is correct.
    Additional you can check in Vendor Master-Company Code Data-Payment Transactions Tab-Individual Payment
    Individual pmt should be un-ticked.
    Hope this will help you
    Regards,
    Deepak

  • Transfering items from one Vendor to another vendor.

    Dears,
    I am a FI consultant.  Here we have a requirement to close a particular vendor and transfer all the items from this vendor to a new vendor.  We dont want to post further items into that vendor. For this,please advise me on the following:
    a) whether we can block the vendor for further transactions and at the same time keep this account active till all the open items in the vendor are processed ? viz. can we allow both these scenario at the same time to a vendor account ?
    b) How I can take a list of open PRs, POs, GR not invoiced, IRs for which GR not done from the MM side ?
    c) How can I transfer all the open PRs, POs, GRs, IRs from the old vendor to a new Vendor ? (I am looking for Tcodes for these)
    d) I also want that a payment term defaulted from the Vendor Master record in the transactions like PRs, POs, should not be able to be changed by the user.  Is it possible to make the payment term field in the POs, PRs as display only ?
    Since this is very critical for me, please offer your comments.
    Note : Please follow forum rules,search forum before posting,one post one question.
    Edited by: Jeyakanthan A on Jun 8, 2011 3:20 PM

    you can block a venor for a purchasing organisation in MK05, so new purchasing activities cannot be performed.
    once all business is done, you can block the vendor at company code level too in FK05.
    Purchasing dcoument lists can be pulled per vendor using ME2L transaction.
    Based on the selection parameter you can retrieve open POs.
    PRs list can be created with ME5A.
    How can I transfer all the open PRs, POs, GRs, IRs from the old vendor to a new Vendor ? (I am looking for Tcodes for these)
    Usually there is no need to transfer PRs, it is enough to assign a new source if there is a source assignment to the unwanted vendor.  This can be done in ME52N and ME56 and ME57.
    Open POs can be deleted (ME22N) and recreated with the new vendor (ME21N).
    You should not delete POs which have already a receipt but not yet an invoice, or have an invoice but not yet a GR. If you want delete such POs, then you you should first cancel the receipt/invoice. But this can be very work intensive, as the goods may already been consumed (which requires that you cancel the consummtion first .....)
    if a field is open for maintenance is defined in customizing OLME > purchase order > Define Screen Layout at Document Level

  • To enter two VAT numbers for one vendor in the same country

    Hello All,
    When we try to enter two VAT numbers for one vendor in the master record and belongs to the same country, the system is not allowing and gives the following message,
    "VAT reg.no. already exists for country BE"
    Message no. F2140
    Kkindly let me know the way to proceed further.
    Many thanks in advance.

    Hello,
    Go to OBA5 and switch off the message for online and batch entries.
    If the message is already not there in OBA5,
    Then go to OBMSG and switch off the same.
    Application Area F2
    Message No.140
    Regards,
    Ravi

  • How can we transfer stock from one vendor to another vendor?

    Dear Gurus,
    How can we transfer stock from one vendor to another vendor?
    pls tell the steps to follow..
    Thanks..

    This is the Normal Third Party Sub Contracting
    Follow these steps
    If components to be provided to a vendor are supplied not by your company but by a third-party, you can order the components from the third-party and specify the subcontractor in the purchase order as the delivery address. At goods receipt the components are posted directly to the stock of the material provided to vendor.
    Entering a Purchase Order for Components
    To order components for a subcontract order from a vendor and have them delivered direct to the subcontractor, enter a standard purchase order with a different delivery address:
    From the Purchasing menu, choose Purchase order ® Create ® Vendor known.
    Maintain the data on the initial screen. Make sure you enter the vendor of the components and the plant concerned.
    Enter the items.
    Then choose Item ® More functions ® Delivery address.
    A dialog box appears in which you enter the delivery address.
    In the field Vendor enter the number of the subcontractor and select the SC vendor box.
    Selecting the box causes the components at goods receipt to be posted directly to the stock of the material provided to vendor when the goods receipt is posted.
    Save the purchase order.
    Posting the Goods Receipt of the Components
    If the subcontractor lets you know that the components have arrived, you can enter the goods receipt for the purchase order. The components are posted directly to the stock of the material provided to vendor.
    Stock Update
    A goods receipt posting has the following results in the system:
    the stock of material provided to vendor at plant level is increased. The stock of material provided to vendor is not managed at storage location level, since the stock is no longer stored at your company.
    Valuated stock at plant level increases.
    Documents
    An accounting document is created for the material document.
    After this normal subcontracting order for finished product.

  • Standard program to transfer open items from one vendor to another

    Hello to you all,
    Does anyone know of a standard program to transfer open items from one vendor to another,
    Thanks
    Yoav

    Hi,
    i dont know whether there is any program but there is one t.code which is meant for one of this purpose.
    We can do the same through F-51 also. First specify the document header information. for the first line item specify the customer debit or credit posting key, vendor number, and special gl if you want (Here you have to give vendor number to whom you want to transfer) press enter
    in this screen specify the amount. and go to Choose open items new screen will come
    Specify the vendor number and in additional selections choose document number and then click enter. the one line item only appear here then go for simulate. if required specify the narration by double clicking on the line item.
    hope this is clear,
    Regards,
    Sankar

  • How do I move all my files from one User Profile (account) into another? I needed to create a new account and want all of my files accessible in the new one.

    How do I move all my files from one User Profile (account) into another?
    I needed to create a new account and want all of my files accessible in the new one.

    ok, what you're learning right now is 101 unix, which is good. Unix is a good thing
    now: the way unix works, and macos (which uses unix underneath) the files and folders work like a hierarchy.
    the start of that tree is /
    so, if you were to do:
    cd /
    (cd means change directory)
    it will bring you at the highest branch of the file system.
    cd /Users
    will bring you to where all the users are.
    to see whats in /Users you can use your friend ls command
    ls means list files/directories
    so:
    cd /Users
    ls -la
    (the -la here means show all (even hidden) and long format (very verbose))  this flag is very optional.
    you will see
    fred
    user2
    for example.
    if you want to see the desktop of user2 you would change directory to it then list the files.
    for example:
    cd /Users/user2/Desktop
    Note that the files and directory are case sensitive, so, desktop is NOT the same as Desktop, or DESKTOP
    ls -la
    you should then be able to see everything in users2 desktop
    you could have done as well the same thing in smaller steps, for example:
    cd /
    cd Users
    cd user2
    cd Desktop
    this is the equivalent of cd /Users/user2/Desktop
    So, for your file, i don't know where it was, but know that if you log in as user2, it will directly put you in
    /Users/user2
    which most likely the file you had created from the other user was in /Users/user1
    if you copied all the files from /Users/original_user to /Users/secondUser
    most likely yes, all your mail, bookmarks etc would be copied over.
    so in your case.
    sudo chown -R seconduser:staff /Users/secondUser
    should work
    Remember that if you start a path with the character /  it means start from the root of the file system, at the highest top you can ever get.
    so
    cd /Users/fred
    is not the same as
    cd Users/fred
    unless you were in / already
    i know it may be confusing at first but it's actually very logical if you play with it.
    to simplify, think of it that / means C:\  on windows
    you can't go any higher than C:\  (in a way)
    if you're unsure which directory you're currently in, you can always type:
    pwd
    it will tell you where you are.
    for example:
    cd /
    pwd
    this shows  /
    cd Users
    pwd
    this now shows /Users
    cd /System/Library
    pwd will show /System/Library
    cd /
    cd /Users
    cd fred
    cd Library
    pwd will show /Users/fred/Library
    unix can look very scary but it's actually vital and very necessary to do tasks sometimes that would take for ever to do via the windows. This is good learning.
    so for the myfile you had created, i can't tell you where it is, at the time you created, if you can do a pwd command you'll know the path,
    ls -la  (this shows all the files where you are)
    if you see myfile in the list
    do a pwd
    whatever is return, the real location of the file would be:
    whatever pwd returned / myfile
    I hope that makes sense.

  • How can I transfer all iTunes purchases from one apple id to another

    How can I transfer all iTunes purchases from one apple id to another?

    Delmar Ford wrote:
    Don't agree. I have two accounts, one for work which I set up years ago and bought a few tracks. I've recently bought iPhone and iPad and created a home ID and wanted to transfer the old purchaces. Everyone says it can't be done, but I've done it.
    1. on the iPhone/iPad change your "store" Apple ID to the one you want ot transfer from.
    2. go into iTune on the device and download the purchaces.
    3. on you PC/Mac change the iTunes login to the same as the device's ID
    4. sync your device
    5. change both ID's back and the purchaces stay on both iTunes and your device.
    Delmar,
    The procedure you describe is putting content from two different IDs into a single library, which can readily be done.
    However, each item of purchased content will still be tied to the ID from which it was originally purchased, and they will be treated separately for purposes of Cloud, Match, Purchase History, etc.

  • Move all Mail emails from one Mac to another

    Move all Mail emails from one Mac to another (both Mountain Lion)
    Is it correct to copy (/replace) the following to the target Mac?
    ~/Library/Mail/
    ~/Library/Containers/com.apple.mail
    and everything beginning with
    ~/Library/Preferences/com.apple.mail.plist...
    Many thanks!

    coxorange wrote:
    Csound1 wrote:
    The Imap account does not need to be moved, sign in on the new machine, your mail will be there.
    Does this mean even though these mails had been downloaded to the first Mac, they are still stored online too
    Yes, Imap systems store all mail on the server, all connected clients are synchronized to the server (the mail itself stays on the server)
    ... regarding the POP accounts. Do you simply want the contents are or you planning on continued use of these accounts on the new machine?
    Continued use.
    Export each mailbox from the old machine to the desktop, to do so select a mailbox, rght click and choose Export, repeat for all others. Move the mailboxes to the new machine'sdesktop.
    I suggest setting up the new accounts before importing the mail from the old machine.
    In mail choose File>Import Mailboxes, choose the ones on the desktop (one at a time) a new mailbox will appear in Mail called Imported, you can move mail from there back to the correct mailbox in the POP accounts.

  • I would like to copy all the songs from one Ipod into another. All the songs are into my Itunes account, I tried to drag and drop the songs from the old Ipod to the new one but it doesn't work. Is there a way to do it ?

    Hello everybody,
    I would like to copy all the songs from one Ipod into another. All the songs are into my Itunes account, I tried to drag and drop the songs from the old Ipod to the new one but it doesn't work. Is there a way to do it ?
    I share one Itunes account with other people from my family and one person would like to keep the same songs on the new Ipod as the ones which were on the old one.
    Thanks in advance for your answer.
    Yan

    Hello Chris,
    Thanks for your answer. I was hoping for an easier answer. Too bad there is no drag and drop solution, it would have been much easier.
    Thanks for answering so fast.
    Bye.
    Yan

  • How do i transfer all my data from one itouch to another?

    how do i transfer all my data from one itouch to another?

    Try here  >  http://support.apple.com/kb/HT2109

  • In my email all the messages from one person bunch together and I would like to separate them. I have done this before on my iPhone but just recently got an iPad and its doing it on this, so does anyone have any ideas how to fix this issue?

    In my email all the messages from one person bunch together and I would like to separate them. I have done this before on my iPhone but just recently got an iPad and its doing it on this, so does anyone have any ideas how to fix this issue?

    Settings >> Mail, Contacts. Calendars >> Organise by Thread. Switch to OFF to see every individual email in the Inbox.

  • Advice on Promoting Master Data Services Changes from one environment to another, e.g. DEV to UAT

    Hi,
    Has anyone got experience of creating a script to promote Master Data Services changes from one environment to another, e.g. Development to Production please?
    The changes basically consist of adding several new MDS members which can be accessed via Excel.
    Thanks in advance,
    Kind Regards,
    Kieran.
    Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

    In MDS terminology an Entity is metadata, and Entity Members are the data. 
    Typically changes to an Entity (ie model design changes) are promoted to different environments.  Model design changes can be replicated manually in each environment or you can Export the model and Import it into the target environment.
    Adding, editing and deleting entity members is performed directly in each environment.
    If you want to selectively import data from a Dev environment, you can use staging.
    David
    David http://blogs.msdn.com/b/dbrowne/

  • Do we have the option to copy all the jobs from one OEM admin to other ?

    Hi Experts,
    I have a number of jobs created under one administrator account in OEM 10g. And now my requirement is to re-create these jobs under some other adminstrator User account.
    So, is there any process in OEM , where we can copy all the jobs from one user account to the other user accounts.
    I guess create like option can be only Helpful if you are planning to copy a single OEM job. And also , administrator who will copying the jobs , should have a super admins assigned so that the job is visible for him.
    So, can someone Help me out in letting me if there is a process for doing this in a single shot ?
    Thank you very much for your Help.
    Thanks,
    NAV.

    Do you need the jobs to be OWNED by the new admin or just accessible and modified? You can edit the job and grant the user Full permissions in the Access tab. Otherwise, the only option is to Create Like as you mentioned. No batch method.

  • HI,  I bought my iphone 5 from you guys. all good apart from one thing, FACETIME is totally missing from my phone and its not there in my settings too. kindly advise with the reason or if there any upgrades to be done.  Many Thanks,  Chamara Kodagoda

    HI,
    I bought my iphone 5 from you guys (online Apple Store). all good apart from one thing, FACETIME is totally missing from my phone and its not there in my settings too. kindly advise with the reason or if there any upgrades to be done.
    Many Thanks,
    Chamara Kodagoda

    We are all iphone userss just like you.  You did not buy your iphone from us.
    You are not addressing Apple here at all.
    Did you buy the iphone ins the Middle East?  If so, it will never have facetime. It is not allowed by the government.

Maybe you are looking for