Material Master: Copy rule for purchase variant prices

Hello together,
in the material master (transaction MM42) on variant level the purchase prices can by copied from the generic article to the variant; for this a copy rule can be applied; one of the copy rules can be selected an be used.
Now, the customer would like to copy additional conditions, such as freight, to the variants.
Is it possible to implement an own copy rule? Is there any Badi or user-exit?
Thank you for your information in advance.
Best regards,
Kurt.

Any answers ?

Similar Messages

Shelf life from material master not flowing into purchase order

Hai friend
I have set a shelf life value in material master ( both minimum & Total shelf life).
But while creating purchase order, values are not flowing from material master to purchase order.
The field is empty.
How to configure, please help.
Regards
Rammohan

1.activate batch management
2.to calculate SLED production date/date of goods receipt is mandatory during GRN
3.Maintain characteristic for production date MCH1 - LFWRT
4.assign this to class
5.Maintain this class to material
6.Now do GR ,it will prompt for production date .based on this ,sytem will calciulate SLED
hope it helps

Check material master data attributes for COPA planning?

Hi
Our users use COPA for sales forecast. Apparantly they don't know their data, because they often manage to plan sales on materials that are no longer "active", defined by "plant specific material status" in the MRP view of the material master.
They would like the system to issue a warning or forbid planning on a material if it has a certain status.
I don't know any way to do this other than getting someone to code a validation that runs whenever planned data is saved. Is there an easier way?

Actually, we are only using ke11 for planning input, so your suggestion won't work for us:-(
However, reading it and trying to write why it wouldn't work inspired me to come up with a possible solution myself using simple derivation:-)
Rule 1:
Table lookup:Source field MARC-MMSTA, target field USERTEMP1
Condition: PLIKZ=1
Rule 2:
Derivation rule: Source field USERTEMP1, target field USERTEMP2
Condition: PLIKZ=1
Attribute: "Issue error message if no value found"
Rule values: Only entries for the valid status (we only have vlaues 1-4, so I just made mapping 1-1, 2-2, 3-3 and left out 4, which should not be planned)
This solution doesn't require that the field is added to the CO-PA structure which is a nice bonus:-)
The request was for a warning, but maybe an error will be acceptable as well.

Restricting material group- vendor combination for Purchase requisitions

Hi ,
The requirement is :
While creating a PR for a material with only short text(no material master record), we have to enter the material group also.
If the material group is not supplied by the vendor then the system should give an error and not allow the user to progress with PR creation.
What we currently do is maintain the material group supplied by the vendor in the vendor master record's SEARCH TERM field of address data. I know this is just for information sake.
Kindly suggest a way to fulfill this requirement.
Thanks

Hi ,
We can create a PR without material master number. In this case it is mandatory to mention a material group.
My question is :
I want to stop people from raising a requisition for a vendor who does not supply the material group.
Thanks
Edited by: Vinayak Venkatesh on Feb 3, 2010 8:43 PM

Material master change access for a particular field

Dear Experts,
Can any one suggest me the posibility of doing the folliwing change.
Client needs to give the access to a user for MM02 transaction for updating only one field.
In Material master -- Plant data/Storage 1 view, there is a field called storage bin. (if we mention storagle location then only this field will be populated), user has to allowed to change this field only, he should not allowed to change the ramining fields in that view.
Please suggest me the posibilities for the above issue.
Thanks in advance,
Regards,
Krish.

Hi,
contact your basis consultant.
in t-code PFCG, he will create the role and restrict the object.
this activity will be performed by basis consultant only.
Regards
Rajesh

New Price Rule For F&A Price

Des:
Now we are using the price rule based on the Factor 1 / Density (Net Weight / Volume) in the Purchages as well as sales.
Now my client is asking the new price rule and it should be calculate in the purchages based on the Factor 1 / Actual density (Which is available in the GR).
Queries:
1. Is there any possibility to recalculate the price in the PO based on the actual density after creation of GR?
2. Is it suggestble to recalculate the price in the Invoice receipt directly based on the Actual density (Which is available in the GR).
3. Is it advisable to create differential invoice for difference amount ((price based on the Factor 1 / Density (Net Weight / Volume) and Factor 1 / Actual density (Which is available in the GR)).
regards

Hi ,
see my replies:
Queries:
1. Is there any possibility to recalculate the price in the PO based on the actual density after creation of GR?
That is exactly what SAP is doing if Purch repricing is configured.
2. Is it suggestble to recalculate the price in the Invoice receipt directly based on the Actual density (Which is available in the GR).
Oh well this is a diffcult question and comes down to the business practice of your customer. Let me tell it more difficult to prevent than to do it.
3. Is it advisable to create differential invoice for difference amount ((price based on the Factor 1 / Density (Net Weight / Volume) and Factor 1 / Actual density (Which is available in the GR)).
No, never seen this. It is either settled using a standard density or the actual.
This topic is a hot one for every customer and requires extra care as you're dealing with external settlement.
Cheers ML

I want to get the material master User-exits for the classification view

Hi , All
I want to insert new data in the classification view of material master date, and I want to check it. I cannot find the user-exit to realize it. Can someone help me ?

I understand you want to create a new characteristic for a classification. If that is the case, then you could have checks on the characteristic value entered. You can go to tcode CT04, enter the characteristic and go to the value tab. You can assign allowed values for that characteristic. Going to Other Value Check in that view, you can also check the entered value against a check table or even create a function module for custom check.
Hope this helps.
Thanks
Swagat

Consignment RAW material cost estimate selection from Purchase Info Price

I'm unable to determine the logic SAP is using to update the Cost Est. Standard for Consignment Raw Materials. For instance we have (3) vendor Purchase Info Records for the same material. One vendor PIR is w/ Info Category for Consignment and the other two vendors w/ Info Category for Standard. When creating the cost std. the system selected the lower of the (2) Standard costs. I don't understand why the system overlooked selecting the vendor in the Source List (the vendor w/ Info Cat. Consignment), with that vendor even being the lowest cost of the three vendors.
The only time that I can find where SAP selects the vendor w/ a Info. Category Consignment is when it's the only vendor listed in a PIR. Any time that a Standard one exists, it overrides the Consignment line when updating cost stds.!?

HI,
As per Standard SAp, system will pick up the value from standard PIR. It will not look into any sub-con, consignment or pipeline PIRs. If you want to pick up the same, there are 2 methodologies
1. User exit in costing variant to pick up speicific PIR
2. Use procurement alterntive methodology
Vijay

Need help choosing a Tabloid copier/printer for purchase

I need your help! I am replacing a B&W Toshiba Model 2860 tabloid copier, and possibly HP LaserJet 4000TN printer. LaserJet still works great, Toshiba is failing. I need ethernet networking, 11x17 paper and glass, affordable consumables, and of course, excellent Macintosh compatibility. I do not require color, but would have some use for it. The copier function really needs to be top notch. My budget is under $2000.00. Thanks in advance for your advice.

The last proof-printer the company I work at purchased is an EPSON 7900 and while our daily proof-quantity is pretty uneven it performs fairly well.
Apart from that we have an EPSON 4000 and an EPSON 9800.
The 4000 is worst with black and white images and has the smallest gamut of the three, but it performs pretty steadily, too.
We do turn it off nights and weekends, though, and it is situated in a permanently air-conditioned room, so thermal conditions are pretty stable.
Is your 4000 possibly exposed to fluctuations in temperature and/or humidity?

Copying rules for conditions do not contain V 1 090 2 entry

I am getting the above error while i copy price from pricing agreement in to service contract line item..
Am i doing something wrong?There are two pricing procedures mentioned in VOV8 in the contracts section for Service contracts PABR01 & PABR02. What is the actual purpose of the condition types underlying these procedures.How can we effectively using these procedures and what role do they play when i copy pricing to the release orders ?

Can you indicate the error message number ??
thanks
G. Lakshmipathi

Copying rules for PO

Dear All,
When Creating PO without Inforecord, the system creates Inforecord without that PO price ie. price is Zero. But it copies that prices from previous PO when I other PO for the same material & vendor.
please explain me the link & where it has been configured.
Thanks
Dhinakrar

Hi,
Please tick the indicator infoupdate at material data (item detail)tab of PO.
Reward if helpful.
Regards,
Chetan.
Edited by: Chetan on Jan 10, 2008 7:17 AM

Copy rules for NotifyUserOfChange

Hello,
I have an issue with an existing custom workflow NotifyUserOfChange.When I modify all needed parameters mentioned in Oracle training material (Practice 6 - BPEL, JDeveloper Setup) I am able to deploy, initiate that workflow.
However it gets me the following error:
[2006/11/08 14:56:24] Error in <assign> expression: <to> value is empty at line "149". The XPath expression : "/child::EmailPayload/child::ns4:FromAccountName" returns zero node, when applied to document shown below:
[2006/11/08 14:56:24] "{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure" has been thrown. less
<selectionFailure>
<part name="summary" >
<summary>XPath query string returns zero node. According to BPEL4WS spec 1.1 section 14.3, The assign activity <to> part query should not return zero node. Please check the BPEL source at line number "149" and verify the <to> part xpath query. </summary>
</part>
</selectionFailure>
I have used standard bpel.xml for that custom workflow.
If you have any ideas, how to fix this issue, your help would by really appreciated.
Dally

Found in log file for BPEL:
<2006-11-08 14:51:53,206> <ERROR> <default.collaxa.cube.services> <PCException::<init>> Exception not handled by the Collaxa Cube system.
<2006-11-08 14:51:53,206> <ERROR> <default.collaxa.cube.services> <PCException::<init>> An unhandled exception has been thrown in the Collaxa Cube system. The exception reported is: "oracle.ias.repository.schema.SchemaException: Unable to connect to Oracle Internet Directory Server. Please verify that the correct Oracle Internet Directory Server parameters are specified in /oracle/contentdb/config/ias.properties. Make sure that the Oracle Internet Directory Server specified in OIDhost, OIDsslport is up and running. Base Exception : javax.naming.NamingException: [LDAP: error code 1
- User does not exist in directory for Proxy Switch]
The user exists in OID, OID is up and running on both SSL, non SSL ports. ias.properties file has correct information.

Materia Master field mandatory for specfic plant for a specfic mat type

HI,
I want to make one MARA-XCHPF field mandatory for a specific plant and specfic material type,If I Give Plant specfic Field referance and check the fiield as mandatory in OMSR for the field referance I have created If I mark it mandatory it become mandatory for all the material type,I want to make mandatory for some materials type only that too plant specfic
How to acheive this? kindly guide me
Kantha

Dear Kantha,
check this link may be useful to you.
Mandatory field per material type
Regards,
PK.

Copy rule for TExt from Inter company po to delivery

Hi All,
We are using inter company stock transfer. The flow as mentioned below.
Inter Company PO - All the text maintain in the PO - ME21N
Delivery / PGI - VL10B
Inter Company Invoice.
Now is it possible to text which entered in the PO should copy into to delivery?
Thanks,
SAmir Bhatt

Follow the instructions given in OSS note 751441
if you need to do more (e.g. adding own other text) than just adopting the text from PO, then follow instructions given in 53593.

Material master : Copy from

Dear all .
On initial screen MM01 , i want to restrict the " Copy from " field to some user , is it possible ?
Regards

Hi,
I have exactly the same problem. Can you give me some details about how you solved it.
I use transaction SHD0 with program name SAPLMGMM and status MENU but the field we want to deactivate it is not there.
Thank you in advance
Best Regards
João Fernandes

Material Master: Copy rule for purchase variant prices

Similar Messages

Maybe you are looking for