Material master data transfer error

Hi experts,
I am getting errors in transfering some materials from R/3 to GTS.
The errors are:
Of 1 selected material(s), 0 were processed successfully. Message no. /SAPSLL/PLUGINR3112
===
The error log mentions that:
Internal error in program object /SAPSLL/NUMBER_GET_NEXT (RC = 1) - processing terminated
Message no. /SAPSLL/CORE_PRODUCT205
Diagnosis
Processing of the current product was suspended due to a processing error. The error occurred in program object /SAPSLL/NUMBER_GET_NEXT with return code 1.
==
Internal error in program object /SAPSLL/API_6850_SYNCH (RC = 2) - processing terminated
Message no. /SAPSLL/CORE_PRODUCT205
Diagnosis
Processing of the current product was suspended due to a processing error. The error occurred in program object /SAPSLL/API_6850_SYNCH with return code 2.
=====
The number ranges are maintained in GTS.It is also maintained in R/3.
Is this a patch issue?

Thanks Vasantha.
We are using the ECC 6.0 and GTS 7.1.
The present patch levels are
PI_BASIS          2005_1_700       0013     SAPKIPYJ7D    PI_BASIS 2005_1_700
ST-PI    2008_1_700       0000          -      SAP Solution Tools Plug-In
SLL-LEG           710       0012     SAPK-71012INSAPSLL SLL-LEG 710 : Add-On Installation
ST-A/PI 01L_ECC600     0000          -      Application Servicetools for ECC 600
As per sap note 858706, the PI 2004.1 Support Package 13 will be required.
Our Basis guys are unable to confirm the PI patch level at this time.
Do you think,we need this patch?

Similar Messages

Inital material master data load error

Hi experts,
We are on ecc 6.0 and gts 7.1.
While loading the initial material master data from R/3 to GTS,Transaction (/SAPSLL/MATMAS_DIRR3),I am getting the error ( for 1 material)-
Of 1 selected material(s), 0 were processed successfully
Message no. /SAPSLL/PLUGINR3112
When I try to load the required list of material, the error is same.
The RFC data distribution model is working for vendors and customers properly.
We want to use only compliance mngt and embargo functionality to block orders.
Can you give me some guidence?

Dear Milmuk,
it is hard to tell, why it is not working. There could be different reasons.
Please check if you have entered the correct data.
It could be that the relevant tables for transfer are not filled.
Please execute the following:
- BD53
- select message type (/SAPSLL/MATMAS_SLL)and edit it
- select a segment
- save
- deselect segment again
- activate
- set in trx BD60 the FM to the correct value
(/SAPSLL/MATMAS_DISTRIBUTE_R3)
You can than check with the programm: '/SAPSLL/PLUGIN_CHECK_R3' if
all 4 required tables (TBD24, TBD62, TBDA2, TBDME) are filled, or not.
If that's all fine I suggest you open a CSS ticket as then a more detailed analysis is necessary.
Christin

Non-SAP to SAP Material Master Data Transfer

Hi Experts,
Please indicate any standard tools in SAP and how to use it wherein we can migrate non-SAP material master data to SAP.
Points will be awarded.
Regards,
LM

Hello Leo,
There are a number of options to do this. You can use the standard SAP tool named LSMW - Legacy System Migration Workbench (transaction LSMW) as a starting point.
Also please read this [Documentation|http://help.sap.com/saphelp_47x200/helpdata/en/0d/414538bc0fe927e10000009b38f8cf/frameset.htm] before undertaking the data migration activity via LSMW.
Additionally, there is also a Direct Input program available named RMDATIND - please go through the program documentation before you use it. You can use this program to transfer material master data to SAP but
make sure you assign this program through LSMW for mapping structures etc. The internet link above will give
more details and step-by-step instructions to follow.
Hope this helps,
Cheers,
Sougata.
p.s. It is sad to see useful answers remain unrewarded such as this one!
Edited by: Sougata Chatterjee on May 9, 2008 10:13 PM

Material Master Data Loading Error

Hi All,
I am loading master data for material. i got the following error.
1. 0material_attr :
    Record 1 :0MATERIAL : Data record 1 ('000000000000010220 '): Version '000000000000010220 ' is not   valid
    Process :   If this message appears during a data load, maintain the attribute in
                     the PSA maintenance screens. If this message appears in the master data
                     maintenance screens, leave the transaction and call it again. This
2.0material_text : Data record 1 ('000000000000010220E '): Version '000000000000010220 ' is not valid
   Process : Same as above.
I have applied RSKC tcode in BI with ALL_CAPITAL, ALL_CAPITAL_PLUS_HEX, and one special character string. but still getting the same error.
Regards,
Komik Shah

Hi All,
Thanks for the reply. i have solved most of errors. but there are some errors like this
Diagnosis
    Data record 261 & with the key '000000000000132559 &' is invalid in
    value '10x8x5 &' of the attribute/characteristic 0SIZE_DIM &.
System Response
    The system has recognized that the value mentioned above is invalid, and
    has processed this general error message. A subsequent message may give
    you more information on the error. This message refers to the same
    value, even though it does not state this explicitly.
Procedure
    If this message appears during a data load, maintain the attribute in
    the PSA maintenance screens. If this message appears in the master data
    maintenance screens, leave the transaction and call it again. This allows to maintain your masterdata
which string i should have to add in RSKC to remove this error ? i have already added the ALL_CAPITAL, ALL_CAPITAL_PLUS_HEX.
I have assigned points.
Regards,
Komik Shah

Material Master data transfer to external system

Dear All,
We are creating the Interface between SAP and MES system for transfering the material master. The plan is to use the standard Idoc type/message type i.e is MATMAS05.
I have done basic settings like defining parnters, port, partner profile etcc. and trying to trigger the IDoc using transaction code POIM. I am getting a message called " "0 Idocs were generated (According to the selection and filter)". I could not findout why system is throwing this message.
Please help in this issue.
Regards,
Senthilraja

Thanks Uwe,
I tried to create IDoc with BD10 for material master and I am getting two error msg as below.
Msg one
1 master IDocs set up for message type MATMAS
then Msg two
0 communication IDoc(s) generated for message type MATMAS
Is it able to get why this msg is comng and no IDoc's were generated..
Regards,
Senthil

Material Master data transfer using IDOC

Hi,
I am working on integration scenario with SAp ECC. we are using SAp PI wherein SAP PI is posting data In SAP ECC using standard IDOC for Material master i.e MATMAS05
You might be aware that while material master creation if we pass Plant value then we can activate all Plant related views i.e. Purchasing, sales plant general, MRP views and Accounting etc...
I have a scenario where I want to activate only Sales plant general view...donot want MRP and purchasing views to get activated
I tried passing only Plant and profit center value which required for sales plant general data view and keeping all other fields blank but it doesnot work.
can you suggest a way.
Cheers
Rc
P.s - I am using xml file which will be converted into IDOC by PI.

you must not create all segments in the IDOC if you dont want the views.
e.g. E1MBEWM is used for the accounting data. without this you wont get that view.

R/3 To APO , customized material master data Transfer

Hello All,
i am having an issue , that we need to add two customized fields (PUP price and Std Price) in /SAPAPO/MAT1, Extra Tab.
i have added these fields on screen and the output structure for them is assigned as /SAPAPO/MATIO-zverpr, and /SAPAPO/MATIO-zstprs.
in R/3 Side -I have added these two fields as in CIFMTLCCUS structure, with Include CI_MTLCCUS (custom structure to transfer data).
also i have fteched these filds from table MBEW and have mapped to Table ot_cif_matloccus of Include ZXCIFU01 of Enhancement CIFMAT01.
In APO side -but the thing left is that i am not able to find the Mapping Structure in APO side for these fields.
i have added these fields to Structure /SAPAPO/CIF_MATLOCCUS (Customer Enhancement Structure for /SAPAPO/CIF_MATLOC), but i didnt find any custimzed place to retrieve and Map to /SAPAPO/MATIO.
please suggest the necessary/missing steps.
Thanks in Advance.
Nitin
Edited by: wisetak on Jun 24, 2011 2:54 PM

Check these three thigns
/n/sapapo/CCR
/n/sapapo/CQ
Check what type of stock has active IM, and what type of stock went in after you created the GR.
Still if you have any problem let us know.
My

QM at Material Master Data

Dear gurus,
We work with SAP Retail version, SAP ECC 6.0. I have activated QM Control on client level.
However when I try to tick QM at Material Master Data, an error occurs:
'Message no. M3831 Plants exist in which you have not specified a control key'.
How can I specify a control key in all plants? Could you show me a path?
With best rgds, Azat

Hi
'Message No.QV508. No entries found', though I filled the fields with existing material, plant and QM Control Key.
for this message say for Plant X Where you want to maintain Control key & plant Y where that material already exists.
Now go to plant Y enter control key 0000 .It may haapen that for plant y there is no Qm view.in this case you may have to create/maintain it through MM01.
Now go to Plant X ...
Message will not appear.
or
do it through MM17
Regards
Sujit

Runtime error while creating material master data

hello sir,
i am facing one prolem while creating MATERIAL MASTER DATA.
AFTER GIVING ALL REQUIRED INFORMATION WHEN I AM GOING TO SAVE THE DOCUMENT ITS SHOWING ABAP RUNTIME ERROR.
MESSAGE TYPE: - MDS_KEYMAP.
MESSAGE CLASS: 001.
PLEASE TELL ME WHAT TO DO?
REGARDS..

SIR THANK YOU FOR YOUR REPLY.
I ALREADY DONE THAT DUMP ANALYSIS.
SO PLEASE KINDLY GIVE ME IN DETAILS ABOUT THAT SOLUTION...

Transfer of material master data with Classification view

Dear Experts
I want to transfer material master data between R/3 using ALE. We are able to send master data using BD10 without classification view.
Please let me know in detail the configuration, steps invloved in sending materail master along with classification view.
Regards
Samal

HAI FRIENDS,
CHANGING CLASSIFICATION VIEW FOR MATERIAL USING BAPI
->CREATE CHARACTERISTIC USING TCODE CT04
->CREATE CLASS USING TCODE CL01 .
-> RUN THIS PROGRAM TO CHANGE THE CLASSIFICATION VIEW
PARAMETERS: P_MATNR TYPE MARA-MATNR. "MATERIAL
DATA: OBJECTKEY TYPE BAPI1003_KEY-OBJECT,
OBJECTTABLE TYPE BAPI1003_KEY-OBJECTTABLE,
CLASSNUM TYPE BAPI1003_KEY-CLASSNUM,
CLASSTYPE TYPE BAPI1003_KEY-CLASSTYPE,
ALLOCVALUESNUMNEW TYPE TABLE OF BAPI1003_ALLOC_VALUES_NUM WITH HEADER LINE,
ALLOCVALUESCHARNEW TYPE TABLE OF BAPI1003_ALLOC_VALUES_CHAR WITH HEADER LINE,
ALLOCVALUESCURRNEW TYPE TABLE OF BAPI1003_ALLOC_VALUES_CURR WITH HEADER LINE,
RETURN TYPE TABLE OF BAPIRET2 WITH HEADER LINE.
OBJECTKEY = P_MATNR.
OBJECTTABLE = 'MARA'.
CLASSNUM = 'MTS_CABLE_BIN1'. "CLASS(CREATED USING CL01)
CLASSTYPE = '023'. "CLASS TYPE (023 FOR BATCH)
CALL FUNCTION 'BAPI_OBJCL_CHANGE'
EXPORTING
OBJECTKEY = OBJECTKEY
OBJECTTABLE = OBJECTTABLE
CLASSNUM = CLASSNUM
CLASSTYPE = CLASSTYPE
STATUS = '1'
STANDARDCLASS =
CHANGENUMBER =
KEYDATE = SY-DATUM
NO_DEFAULT_VALUES = ' '
IMPORTING
CLASSIF_STATUS =
TABLES
ALLOCVALUESNUMNEW = ALLOCVALUESNUMNEW
ALLOCVALUESCHARNEW = ALLOCVALUESCHARNEW
ALLOCVALUESCURRNEW = ALLOCVALUESCURRNEW
RETURN = RETURN
LOOP AT RETURN.
WRITE: / RETURN-TYPE ,RETURN-MESSAGE.
ENDLOOP.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT =
IMPORTING
RETURN =
BY VENKATESWARAREDDY D
MYTEC SOFT LTD

Error in uploading the material master data

HI friends,
I have trasferred the material master data through idocs from one server to another server(with in SAP only).
Outbound side the status of idoc is 3 which is OK.But inbound side ,the status is 51 and the error is 'Function module not allowed IDOC_INPUT_MATMAS01'.I debugged the function module in which the control records , data records are getting transferred correctly and also the segments data is also fine.But , i am not able to rectify the error.
Can anybody give the solut

Hi mahesh,
check the proces code may be having the FM module 'IDOC_INPUT_MATMAS01'. change with some other FM for processing the IDOC. you need check with different ways what is the problem. better dont stick on one thought.
~linganna

How to transfer Material Master data information from ECC to CRM

Hi ,
Changes to the Classification data of Material master for the class type-001 and Custom
ZFIELDS on mara will trigger the Interface functionality. Any changes to the
custom zfields and classes or characteristic values on Material Master must transfer the information from ECC to CRM. By using RFC .
Regards,
Pavan

Hi,
You need to use change pointer to do this. Go to transaction SALE,
expand MODELLING AND IMPLEMENTING...
expand MASTER DATA DIST...
expand REPLICATION OF MODIFIED DATA
You may need to maintain distribution model in SALE.
Cheers.
Reward if useful

Material Master Data load failed

Hi All,
I am loading material master data. I have around 8055 records in R/3. The load has failed with an error "Non-updated Idocs found in Business Information Warehouse" and asking me to process the IDocs manually. I have checked in WE05 for the IDocs and found 3 Idocs with status 64(IDoc ready to be transferred to application).
But when I checked in the manage screen of the 0MATERIAL I could find the Transfered and Updated records as 8055. I have even checked the data in 0MATERIAL and found that all the data(8055 records) has already been uploaded.
Why is it still showing an error(load failed) even when all the data has been uploaded? What should I do now?
Best Regards,
Nene.

hi Nene/Sankar,
for material text no language please check Note 546346 - Material texts: no selection on languages
and for why idocs problem, check e.g Note 561880 - Requests hang because IDocs are not processed, Note 555229 - IDocs hang in status 64 for tRFC with immediate processing.
hope this helps.
Note 546346 - Material texts: no selection on languages
Summary
Symptom
When loading material texts from R/3 into the Business Information Warehouse, you cannot select languages.
Other terms
DataSource, 0MATERIAL_TEXT, InfoSource, InfoObject, 0MATERIAL, SPRAS, LANGU, 0LANGU, MAT_BW, extraction, selection field, delta extraction, ALE, delta, change pointer
Reason and Prerequisites
As of PI/PI-A 2001_2 Support Package 6, the selection option for the 'SPRAS' field in the OLTP system was undone in the 0MATERIAL_TEXT DataSource. (Refer here to note 505952).
Solution
As of PI/PI-A 2002_1 Support Package 4, the 'SPRAS' field is provided for selection again with the 0MATERIAL_TEXT DataSource in the OLTP system. When loading the material texts from BW, the language is still not provided for selection in the scheduler, instead all languages of the language vector in BW are implicitly requested from the source system. However, during the delta update in the source system, the change pointers for all languages in the source system are now set to processed, regardless of whether the language was requested by BW or not.
Import
Support Package 4 for PI/PI-A 2002_1_31I - PI/PI-A 2002_1_45B
Support Package 4 for PI 2002_1_46B - PI 2002_1_46C
Support Package 3 for PI 2002_1_470
In transaction RSA5, copy the D version of the 0MATERIAL_TEXT DataSource to the A version.
Then replicate the DataSources for 0MATERIAL in the BW system. The 'SPRAS' field is then flagged again as a selection field in the transfer structure of the 0MATERIAL InfoSource. The transfer rules remain unchanged. Activate the transfer rules and perform a delta initialization again.
Note 561880 - Requests hang because IDocs are not processed
Symptom
Data extraction in a BW or SEM BW system from an external OLTP System (such as R/3) or an internal (via DataMart) OLTP System hangs with the 'Yellow' status in the load monitor.
After a timeout, the request status finally switches to 'Red'.
Information IDocs with the status '64' are displayed in the 'Detail' tab.
Other terms
IDoc, tRFC, ALE, status 64
Reason and Prerequisites
Status information on load requests is transferred in the form of IDocs.
IDocs are processed in the BW ALE model using tRFC in online work processes (DIA).
IDoc types for BW (RSINFO, RSRQST, RSSEND) are processed immediately.
If no free online work process is available, the IDocs remain and must then be restarted to transfer the request information.With the conversion to asynchronous processing, it can often happen that no DIA is available for tRFC for a short period of time (see note 535172).
The IDoc status 64 can be caused by other factors such as a rollback in the application updating the IDocs. See the relevant notes.
Furthermore, you can also display these IDocs after the solution mentioned below, however, this is only intended as information.
You must therefore analyze the status text.
Solution
We recommend asynchronous processing for Business Warehouse.
To do this, you need the corrections from note 535172 as well as note 555229 or the relevant Support Packages.
The "BATCHJOB" entry in the TEDEF table mentioned in note 555229 is generated automatically in the BW system when you import Support Package 08 for BW 3.0B (Support Package 2 for 3.1 Content).For other releases and Support Package levels, you must manually implement the entry via transaction SE16.
Depending on the Basis Support Package imported, you may also have to implement the source code corrections from note 555229.
The following basic recommendations apply in avoiding bottlenecks in the dialog processing and checking of IDocs for BW:
1. Make sure there is always sufficient DIA, that is, at least 1 DIA more than all other work processes altogether, for example, 8 DIA for a total of 15 work processes (see also note 74141).
TIP: 2 UPD process are sufficient in BW, BW does not need any UP2.
2. Unprocessed Info IDocs should be processed manually within the request in BW;in the 'Detail' tab, you can start each IDoc again by selecting 'Update manually' (right mouse button).
3. Use BD87 to check the system daily (or whenever a problem arises) for IDocs that have not yet been processed and reactivate if necessary.
However, make sure beforehand that these IDocs can actually be assigned to the current status of requests.
TIP: Also check transaction SM58 for problematic tRFC entries.
IMPORTANT: Notes 535172, 555229 and the above recommendations are relevant (unless otherwise specified) both for BW and for SAP source systems.

Material Master Data Integration on AUTO ID

Hi all,
We are trying to send material master data from R3 to AII, with the help of XI forum (very good profesionals) we have obtained the communication but now we have another problem...we get this error 'Parameters required to call function module COM_CATEGORY_READ are missing 801(COM_CATEGORY)'
We have created one hierarchy and one category in our customizing, we have associted them and defined output format and storage form...Anyone knows if we are missing something in our configuration??
Thanks in advance!

Hello Daniel,
I am facing a problem while sendig Material master IDOC from ERP2004 to Auto ID 2.1.
I understand that you have done this sucessfully. Could you please help me with my problem. The case description is given below.
I am using Auto ID 2.1 with SP1 on NW04.
Integration server is XI 3.0 with corresponding XI Content for Auto ID.
The backend is ERP2004.
I am using the config guide for Auto ID 2.1.
After completing the configuration, I tried sending the Material Master IDOC to Auto ID.
IDOC gets created successfully. XI says the message transfer is successfully.
In the log of Auto ID. I am getting the following error while importing the Material Master product:
Product ID AUTOIDAII_MAT has an invalid format
Internal error in /AIN/DM_PROD_COMMIT
Message no. COM_PRODUCT897
The description says that it may be a program error.
Or the program expects some variable to be filled which has not occured.
Any idea what could be the error. Or where should I try looking for to get more detail info.
Do some one knows what should be the patch levels for the different components in all three servers for Auto ID 2.1 SP1.
Thanks for any kind of input.
Regards,
Arundeep Singh

Create Material Master Data with BAPI

Hi,
I don't know using of BAPI. I want using BAPI_MATERIAL_SAVEDATA bapi for creating material master data for Basic Data1, Basic Data2, Purchasing and MRP views. Does anybody can help me ?
Thank you
Good night

Hi,
Please refer to the documentation below:
BAPI_MATERIAL_SAVEDATA
Short Text
Create and Change Article Master Data
Functionality
You use this method to create new material master data or to change existing material master data. The data on a material can be transferred for each call.
When creating material master data, you must transfer the material number, the material type, and the industry sector to the method. You must also enter a material description and its language.
When changing material master data, you need enter only the material number.
In the header data, you must select at least one view for which data is to be created. Depending on the view selected, you must maintain other required parameters. If you do not enter values for all of the required parameters, the method is ended with an error message.
The corresponding fields in the tables (such as CLIENTDATA) must first be supplied with data by the calling program. An indicator must also be set for each of these fields so that the data is written to the database by the method. This requires the calling program to supply the corresponding field with the indicator in a checkbox table (for example, CLIENTDATAX). Checkbox tables exist for tables that do not contain any language-dependent texts (MAKT, MLTX), International Article Numbers (MEAN), or tax classifications (MLAN). Several data records for a material can be created in these tables.
If a structure contains fields for units of measurement (such as structure CLIENTDATA, field BASE_UOM), language indicators (such as structure MATERIALDESCRIPTION, field LANGU), or country indicators (such as structure TAXCLASSIFICATIONS, field DEPCOUNTRY), there is always a field of the same name with the ending _ISO. This makes it possible to transfer either the internally used SAP code or a standardized ISO code for the units of measurement, language indicators, or country indicators. ISO codes are converted to an SAP code internally for further processing. The ISO code is used only if the SAP code is not transferred. If you use ISO codes, there must be a unique assignment of the ISO code to the SAP code in the following activities in Customizing for Global Parameters:
Check Units of Measurement
Define Countries
If you want to maintain long texts (basic data texts, internal comments, purchase order texts, material memos, or sales texts) or customer-defined fields for a material, some special conditions have to be observed. They are described in the documentation for parameters MATERIALLONGTEXT and EXTENSIONIN.
Parameters
HEADDATA
CLIENTDATA
CLIENTDATAX
PLANTDATA
PLANTDATAX
FORECASTPARAMETERS
FORECASTPARAMETERSX
PLANNINGDATA
PLANNINGDATAX
STORAGELOCATIONDATA
STORAGELOCATIONDATAX
VALUATIONDATA
VALUATIONDATAX
WAREHOUSENUMBERDATA
WAREHOUSENUMBERDATAX
SALESDATA
SALESDATAX
STORAGETYPEDATA
STORAGETYPEDATAX
FLAG_ONLINE
FLAG_CAD_CALL
NO_DEQUEUE
NO_ROLLBACK_WORK
RETURN
MATERIALDESCRIPTION
UNITSOFMEASURE
UNITSOFMEASUREX
INTERNATIONALARTNOS
MATERIALLONGTEXT
TAXCLASSIFICATIONS
RETURNMESSAGES
PRTDATA
PRTDATAX
EXTENSIONIN
EXTENSIONINX
Exceptions
Function Group
1001UEB
Thanks,
Sandeep.

Material master data transfer error

Similar Messages

Maybe you are looking for