Material Master ------ Distribution channel block

Dear Experts
There is a doubt when we give the status indiacator in the MMR in the sales org 1 that this product is obsolete will not be used in the sales organization  and distribution channel.
the system does not give the error only the delivery cannot be created from such order but how will the user understand that thsi product is obsolete or replaced or closed down.
there is no pop up message,
regards,
A  S

You can make it as a warning or error message. 
To achieve this,  in material master whatever value you have maintained in the said field, make a note of the same.
Now go to TCode OVSU, double click on the status which you have assigned in Material Master so that you can see list of documents that can be blocked.  Wherever you maintain B  the end user cannot create that document.
Check this and post the feedback in case still you have any issues.
thanks
G. Lakshmipathi

Similar Messages

  • Material Master Distribution Document

    Hi all,
    Please can any one giv me the document which can cover the whole material master distribution through ALE.it should include all concepts like classification, class and characteristics. transfers etc.
    message types CHRMAS, CLSMAS, BOMMAT, ECMMAS, CNPMAS etc
    Thanks a lot for your help in adv
    Reddy

    hi ,
    i hope you need to search SDN one bye one .
    use this link ..
    https://wiki.sdn.sap.com/wiki/display/ABAP/ALE%2CIDOC.
    ~linganna

  • Material master distribution through BD10 is not working

    hi i am learning and created all the customizing setting to send material master data from sending system to the receiving system but the sending system shows idoc has been sent to port Ok with status 03 but i dont see the material being created in the receiving system. Where am i going wrong? Do i need to trigger BD11 in the receiving system?

    Hi Suresh...
                  After reaching port with status 03..
                  we have to run the program RBDMOIND for status conversion..
                  Once we run this program all the IDoc's which are at port are
                  sent to their receiving partner...and status becomes 12...

  • Material Master Distribution

    I am currently involved in an ALE project.  We want to use ALE to distribute Material Master Data.  However there does not appear to be any way to send the Classification Data OR to capture changes (change pointers) to ensure any changes to the classification will be distributed to the relevant logical systems.
    (For MM01 and MM02  )
    e-mail--- [email protected]

    Hi Suresh...
                  After reaching port with status 03..
                  we have to run the program RBDMOIND for status conversion..
                  Once we run this program all the IDoc's which are at port are
                  sent to their receiving partner...and status becomes 12...

  • Mass updating of material master

    Hi,
    can any one plz tell me the process of mass updation of material master charecteristics such as classification name, classification type,charecteristics name, charecteristics value for the given materials.
    give me some brief overview so that i can proceed on that.
    I have to use either BAPI or IDOC only.
    Thanks & Regards
    Nageswar

    Hi Eswar,
    Please check with BAPI_OBJCL_CREATE_KEY. There are no of threads available on same topic. lease check for the available information in SCN.I will suggest you post this in Data transfers forum.
    Same thread
    mass updating of material master
    which was blocked by moderator  Thomas and posted the same again
    Regards,
    Madhu.
    Edited by: madhurao123 on Nov 2, 2011 11:43 AM
    Edited by: madhurao123 on Nov 2, 2011 11:45 AM
    Edited by: madhurao123 on Nov 2, 2011 11:47 AM

  • Material master ALE

    I would like to add a new field Proj stk val. class (QKLAS-MBEW) and send it through ALE  .We use reduced message types send the Idocs through ALE.
    What are the settings need to be done at outbound system and Inbound system.
    Can any body help ?.
    Thanks

    Hi,
    Welcome to SDN.
    Please check this link for material master distribution step by step.
    http://help.sap.com/saphelp_nw04/helpdata/en/78/217da751ce11d189570000e829fbbd/content.htm
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • Distribution channel in PO

    Dear Gurus
    have created Vendor ABC and Customer with same name as ABC.
    I have created Material A  for that I am maintianing Distribution channel as 24
    I am creating Return PO ,In that PO i want the Shipping Tab to be displayed bcoz i want to create delivery through SD
    But the shipping tab is not getting displayed
    But if i extend the Material for Distribution Channel 10
    then for Return PO the shipping tab gets displayed
    Can anybody suggest me why the shipping tab is getting displayed for distribution channel 10 and not 24 ??
    What could be the possible setting so that in shipping tab i can be able to see both the distribution channel
    Waiting for reply
    Regds
    shailesh

    Hi Jürgen L. 
    Thankz a lot ,My problem got solved,well i am held up with one more problem ,will be thankful to you if you can throw light on this:
    Our client is going to start Export oriented unit and we are mapping the system as per the reuirement
    Well i m in maharashtra in india and as per the govt rules and regulation for EoU ,we can purchase the material without payment of duty from the vendor, against CT3 form,
    But when the goods(rejected) moves out from clients premises the one who has purchase the goods(i.e after GRN),we have to pay the excise duty through PLA and only the duty has to be recovered from the vendor.
    What can be the procedure for this scenario.........
    Will be very thankful if you can guide me on this
    regds
    shailesh
    [email protected]

  • Material Block in a Distribution Channel

    Hello,
    I want to block a material in a particular distribution channel, so that I will not be able to create any sales order for that material in that distribution channel.
    I had marked the material for deletion through MM06 in the required sales org and distribution channel. But the system is not stopping me to create sales orders and then the delivery documents.
    Could you please advise me how to tackle this situation.
    Regards
    Ritam

    Go to material master and select Sales: sales org.1 view.  There you can see a field "DChain-spec. status".  Assign 01 there and save.
    Now go to OVSU, select "01" and click on blue lens on top so that you will see some list of tabs.  In that maintain "B"   for "Block for order"  field.
    thanks
    G. Lakshmipathi

  • LSMW datamigration material master with multiple distribution channels

    Hi,
    We plan on using the LSMW to migrate our customer's material master to a ECC 6.0 system.
    Currently we use the BMM00 and BMMH1 structures, but there I can specify only one distribution channel.
    Does anyone know how to include multiple distribution channels in LSMW material master migration?
    Thanks in advance for your support.
    Edited by: Mohammed Qasim Malik on Jan 21, 2008 10:01 AM

    you need an extra record in your source per distibution channel.
    Alternative you can create the extra record with a small Abap  code in LSMW in section __END_OF_RECORD__
    There you habe in standard the code:
    transfer_record.
    just add after this statement a statement that gets the additional wanted distribution channel into the  distribution channel field.
    BMM00-VTWEG =  'xx'.
    transfer_record.

  • Remove Sales Org & Distribution Channel assigned in Material Master

    Hi,
    Is it possible to remove Sales Org & Distribution Channel assigned in Material Master. This is a newly created material I looked at MM06 to see if this assignment can be removed without setting the material for deletion. Any suggestions welcome.
    Thanks.

    the only way to get rit of existing  data is to set a deletion indicator and subsequently run archiving.
    In your case go to MM06, enter material number, sales org and distribution channel and set then the deletion indicator at this level only.
    Then go to SARA object MM_MATNR and run archiving.
    Archiving is usually a process, not just a sequence of transactions. Archiving requires customizing, and certainly the most recent OSS notes for the archiving object (this can be extremly many if your hotpackage implementation was long ago).
    this is especially needed to archive only certain organisation levels, as this functionality came with OSS notes

  • Material Master data distribution using the Classifications

    Hi All,
    I am attempting to cater for a business scenario where we wish to distribute material master records via IDOCS by assigning a class to each material we wish to send out. 
    We have a new classtype (Z01) which is setup for distribution purposes (the status for this class type has been maintained).  I have defined a filter using classes in BD60.
    The next step was to setup the distribution model for my message type and partner.  I added the filter group in the distribution model for the message type (filter group "dependant on class membership").  The final step after generating the partner profile was to assign a new class that I created to the material master.
    We are using change pointers and BD21 to create the IDOCs.  I am managing to create the outbound IDOC but I am getting a 29 Status with an error message "Class type Z01 , receiving system ZFR001 : no list maintained".  ZFR001 is the name of the external partner.  The name of the class that has been assigned to the material master is also ZFR001.  There are no characteristics assigned to the class.
    Has anyone setup a similar scenario?  I'd appreciate any guidance as I have hit a bit of a wall.
    Best regards,
    James.

    Hi,
    The message type to send HR data is HRMD_A, i don't think that filtering this only message you achieve what you describe.
    In this message type, yo can define filters to send only the relevant infotypes that you need, but all of them will be send in the same idoc, for one employee.
    So I think to achieve what you want, you should create customer Message types (Z's) as reductions of HRMD_A standard message type and then in BD64 create one different Model for each one. So in each model you can put only the infotypes you want. You should very carefull with the updating in your destination system, because if you process all the message type at the same time, there will be a lot of blocking in employee objects.
    It is weird what you want to do, but this could be the solution.
    Regards,

  • Blocking of material in one plant only , in material master

    Dear SD Gurus
    We have 2 manufacturing Plants . We have sometimes limited availability of material in one plant & the same is available in abundance in other plant
    We want to stop the sale order punching for this material in first  plant , but to allow the sale order punching in the second plant
    In Material Master , in sale org-1 view , we can block the material only as per Sales Org / Channel & not as per plant
    Now if we block the material in this way , order punching will be stopped in both the plants
    Is there any way out to meet our purpose

    Hi,
    You can use the fields available in sales org /general plant view .
    For Ex: Use material group 1 and have two option block/ Un block and maintain the same in the material master.
    Now when you create a sales order with the same material and the first plant ( as per your scenario) the material group 1 will be copied in the sales order . With th ehelp of abaper put a validation that if the material group 1 for that material in the first plant is maintained as block through anerror message and wont allow system to create a sales order.
    Hope this will help you.
    regards,
    Krishna O

  • How to know Sales Organization and distribution channel for a material

    How to know Sales Organization and distribution channel for a created material

    Hi,
    For a single material means u can go mm03 7 select the material number 7 select the sales views then press f4 the details u can see.
    For any number of materials u can go to se11 & give table name MVKE then select the required parameters & execute.
    pandari

  • ALE:Material Master Data Distribution

    Hi
    I am new to ALE Material Master Data Distribution and if the questions are incorrectly worded, please accept my apologies. It is due to lack of knowledge.
    I am doing Material Master Data distribution and I am using standard basic type MATMAS03. The standard TCode MM01, MM02 has SAP tables and 3 custom tables.
    I have turned the active on using BD61 and change pointers to message type.
    Q: Is the change pointer, applicable to entire material master? i.e. if I change a field in Z table or standard material tables, can an IDOC be created for the entire material record?
    Q: What is the function of BD52? Does this override the option Activate Change pointers for message type? Does it mean, if the changes are made to those fields in BD52 a change pointer is created?
    Q: If I change Z table only, will there be a change pointer created? If not, how could I accomplish this using BD52.
    Q When do we use the enhancement MGV00001?
    Also, If you could add anything in addition to above queries, it will be helpful to me and I appreciate it.
    With regards,
    William

    Thank you Sudhakar.
    Your tips are good, but, I was not able to get the problem resolved.
    Let me explain what I have done based on your tips.
    1.  MATMAS uses MATMAS03. The basic type has NOT been modified to have z fields yet.
    2.  Using BD52, i have created the following fields
         MATERIAL    ZEMM_MARA_TECH   IM_ADVISORY_CODE
         MATERIAL    ZEMM_MARA_TECH   KEY.
    3.  Modified the MMR for IM_ADVISORY_CODE.
    I did not see a change pointer for this change.
    Q:  When I created above entry using BD52, was asking the table name. The table name is stored in TCD0B. What TCode is available the entries in TCDOB. For the time being, i created using SQL.
    Q. Is there a follow up configuration required to capture the changes?
    I will award the points in a couple of days time, even if I do not get the solution, because you have spent your precious time for the community. I will wait for a couple of days for other suggestions and close the Problem.

  • Blocking Material Master for Workflow

    Dear colleagues,
    We are customizing creating and changing of material master workflow, i.e., screens will be generated by various people and supervisors of the initiators will be approved. For this purpose, I use Business Object BUS1001006 to serve it. But my problem is when a material master is created or changed in one of the views; I want to block that material in use of PO or whatsoever until confirmation is done by respected supervisor. Is there any field available, like in vendor master (LFA1 u2013 CONFS and LFB1 u2013 CONFS), in material master tables like MARA, MARD or etc?
    Best regards,

    Dear,
    You can very well acheive the functionality which you are expecting.
    You can block the material in MM06...here set the deletion flag....
    Now set the message as Error for Message number ME 051 in the below mentioned path:
    Spro-MM-Purchasing-Environment Data-Define Attributes of System Messages-System messages
    Now users can not create any PO with this material untill and unless you go and remove the deletion flag in MM06.
    Regards
    Utsav

Maybe you are looking for

  • Problem in message Mapping SAP PI 7.1

    Hi Experts, I have a problem in my Message Mapping, Design: [Design|http://www.life-4-music.de/prob.jpg] Messagemapping: [MappingTest|http://www.life-4-music.de/probII.jpg] The Problem is, that ElementC from SourceMessage occours "0 to n" times in El

  • Runing procedures from DBMS_STATS package - how ?

    Hello, i created account long time ago, but this is first time i need help. How can i run this code with PHP, and get results. In sql+ works fine - i made some attempts without any good results. {sql} variable num_rows number; variable num_blks numbe

  • Does my iMac have added security for my personal information through the internet.

    Does my iMac have security for my personal information, a gentleman keeps calking my phone and saying my computer is being hacked through my internet

  • Battery reporting it is fully charged when it isn't

    Hello, Read through some of the forum posts last night and this morning to see if my question was answered but didn't really see anything. Here is the issue: Problem: Macbook Pro's Battery is reporting that it is fully charged when it isn't. This is

  • Service Pack and JNDI Errors

    Hi all, hope someone can help. I just upgraded to WL60 with SP1 and now all my EJB are getting JNDI errors cant resolve name. Path and Classpaths have not changed, in fact nothing has changed expect for the upgrade. Can anyone tell me what has change