Material master distribution through BD10 is not working

hi i am learning and created all the customizing setting to send material master data from sending system to the receiving system but the sending system shows idoc has been sent to port Ok with status 03 but i dont see the material being created in the receiving system. Where am i going wrong? Do i need to trigger BD11 in the receiving system?

Hi Suresh...
              After reaching port with status 03..
              we have to run the program RBDMOIND for status conversion..
              Once we run this program all the IDoc's which are at port are
              sent to their receiving partner...and status becomes 12...

Similar Messages

  • Setting the custom master page through powershell is NOT working

    Hi,
     I am writing the below code to set the  custom master page through powershell.
    But its not working .when i went to site settings-->master page --> in the drodown , the  maste page set is seattle.master ONLY, though my current master page is available in the dropdown.
     Can anyone pls help, whether i am missing in the below :
          Add-PSSnapin Microsoft.SharePoint.Powershell
           $SiteURL = "http://srvr1:22307/sites/SPW5"
        $weburl= $SiteURL
        $Site= Get-SPSite $SiteURL
        $web =  $Site.OpenWeb()
    $web.CustomMasterUrl = "/_catalogs/masterpage/myMasterpage.master"
    $web.MasterUrl = "/_catalogs/masterpage/myMasterpage.master"
    $web.Update()
    Das

    Hi,
    Is it a publishing page? If yes can you try the PowerShell scripts corresponding to the following code snippet?
    var publishingWeb = PublishingWeb.GetPublishingWeb(web);
    publishingWeb.CustomMasterUrl.SetInherit(inheritFromParent, false);
    publishingWeb.CustomMasterUrl.SetValue(masterPageUrl, false);
    publishingWeb.MasterUrl.SetInherit(inheritFromParent, false);
    publishingWeb.MasterUrl.SetValue(masterPageUrl, false);
    I've noticed sometime (not sure though) that Master page doesn't get updated if the inherit property is not updated first.
    Thanks,
    Sohel Rana
    http://ranaictiu-technicalblog.blogspot.com

  • Material Master Distribution Document

    Hi all,
    Please can any one giv me the document which can cover the whole material master distribution through ALE.it should include all concepts like classification, class and characteristics. transfers etc.
    message types CHRMAS, CLSMAS, BOMMAT, ECMMAS, CNPMAS etc
    Thanks a lot for your help in adv
    Reddy

    hi ,
    i hope you need to search SDN one bye one .
    use this link ..
    https://wiki.sdn.sap.com/wiki/display/ABAP/ALE%2CIDOC.
    ~linganna

  • MM03 Material master display F4 help is not available

    Dear All..
                    For one particular user MM03 Material master display F4 help is not available
    even i have press the push button on material text the help is not popup.
    Even authorization already exist  for that user material master display.
    Please give your suggestion on this.
    Regards
    Anand.

    HI Anand,
    I am going to assume that the problem is with F4 help in general, and not just with MM03.
    If you have only one user with the problem, then the best way to troubleshoot is to compare with another user who is not having the same problem (like yourself).
    First check Help settings for the user:  From any screen, select Help>Settings  select F4 tab.  Review the settings. Look for differences.  Make corrections.  Save.
    If you can find nothing amiss, then the GUI is probably the culprit.  Check to see if this user is on the same version and patch as the 'successful' users.  From SAPLOGON, select the tiny SAP icon from the blue bar, then select 'About SAP logon'.  Alternately, you can right clik on the SAPLOGON on the Windows taskbar and select 'About SAP Logon'. 
    There are known problems of bad interactions between certain Microsoft Software and certain patches of SAPGUI.  If any problems, download the latest GUI version and patch from SAP software distribution Center
    http://service.sap.com/swdc
    Select Download>Support packages and Patches>Entry by Application group
    Select SAP frontend components.
    Select the appropriate platform, then download the version that you need.
    If the user is on the same vers & patch as you, and you can't find any other problem, might be a good idea to reinstall the SAPGUI.
    Regards,
    DB49

  • Since I installed the new OS X Lion, the iCal syncing through iTunes is not working properly.

    Since I installed the new OS X Lion, the iCal syncing through iTunes is not working properly.
    When I sync my MacBook Pro with my iPhone and iPad, the events set in both devices (iPhone & iPad) are not transfered to the iCal on my labtop. Events created in both devices are transfered and copied betwen them when I sync them with the iTunes app (through the MacBook Pro) but they are not trasfered/copied into the labtop (iCal). The events created in the iCal (on my MacBook) are tranfered to the devices as two events on same hour. One, with the description created on the iCal, and the other as a New Event (no description). This is happening since I installed the new OS X Lion last week.
    I file a report and talked with an Apple Support Representative, but they could not help me. They have not receive any other reports on this matter. Do someone has confronted this issue. I need to find out how to solve this problem.
    Regards,
    JAD

    Hi Sydness,
    Thank you very much for your help. It just worked fine. I have 4 macs in my company for 25 years (one is updated each year), and it is the first time I could not solve a problem for weeks. It gave me the opportunity to join this great community.
    Charles
    Sydness wrote:
    I reset my SyncServices and the calendar sync worked perfectly after that.
    I followed the instructions found here:
    http://support.apple.com/kb/TS1627?viewlocale=en_US
    Mac OS 10.7.1 - MacBook

  • The two finger cycle through apps does not work?

    Hello,
    I don'nt know what is wrong, but it seems that the two finger gesture allowing to cycle through apps does not work for me. I  am using a standard mac Bluetooth mouse. 
    Can anyone help me with this?
    Thank you
    Sebastien  Dion
    from Quebec city, Canada

    Download a free app. It reauthorizes your device for use of your apple id.

  • Material Master Update through BAPI - Follow up material not updated

    Hi Experts,
    I am updating the material master through a custom transaction using the BAPI  'BAPI_MATERIAL_SAVEDATA'. Rest of the fields are updating correctly except for discontinuation ind., effective out date & follow-up material.
    When I try to update it through MM02 it is working fine. However, when I pass the same data through BAPI it is throwing an error message that 'the material XXXXXX does not exist or is not activated'.
    Please advice.
    Thanks & Regards,
    Ashu Arora

    Some more fields need to be updated along with the discont. indicator. Now working fine.

  • Gl through service group not working

    Dear all,
    We are facing one issue.
    We linked material groups with valuation class to ensure that system picks right gl account while creating PO/PR without material code. This is done through config path
    SAP IMG> MM>Purchasing>material master>Entry Aid without material master. This is working fine in our current  system.
    In case of service we use both service master and nob-coded service. For service master, we used service category and linked it to valuation classes to ensure while procuringnon-coded service system picks right gl automatically. The same config path is follwedas above.
    Although the process is working fine for materials but it is not functioning for service.ie. for service system is not picking gl account attached at all.
    Why this is happening?What is the solution? explanatory replies will be rewarded with full points.
    Regards,
    Santosh

    Thanks Raju for your quick reply. I am trying your sugession in system
    But it is not clear to me how system will automatically pick proper gl in purchasing doc (PR/PO) in case there is no service master (Text service)? we do not want to aalow users to enter gl account directly.
    Please suggest.
    Regards,
    Santosh

  • Material master upload through flat file using the BAPI_MATERIAL_SAVEDATA

    Hi Guys,
    I need to upload the material master using the BAPI, I need to update the all the views in the material master, Could any one can help please?
    I using EXCEL file is input file and suggest me the, excel file format, if could you suggest it would be very help to me.
    Thanks,
    Gourisankar.

    please go through this code
    *& Report  ZBAPI_MATERIAL_SAVEDATA
    *& AUTHOR
    *& PURPOSE : THIS REPORT USES BAPI MATERIAL SAVE DATA TO UPDATE AND CREATE
    *&           THE MATERIAL
    REPORT  ZBAPI_MATERIAL_SAVEDATA NO STANDARD PAGE HEADING MESSAGE-ID (ZHNC).
    TYPES:BEGIN OF TY_MAT,
           MATERIAL(4),
           IND_SECTOR(1),
           MATL_TYPE(4),
          BASIC_VIEW(1),
          SALES_VIEW(1),
          PURCHASE_VIEW(1),
          STORAGE_VIEW(1),
           MATL_GROUP(9),
           BASE_UOM(3),
           BASE_UOM_ISO(3),
          MATL_GROUP1(1),
          BASE_UOM1(1),
          BASE_UOM_ISO1(1),
           PLANT(4),
           DEL_FLAG(1),
           PUR_GROUP(3),
           BASE_QTY(13),
          PLANT2(4),
          DEL_FLAG5(1),
          PUR_GROUP1(1),
          BASE_QTY1(1),
          PLANT3(4),
           STGE_LOC(4),
           MRP_IND(1),
          PLANT4(4),
          STGE_LOC1(4),
          MRP_IND1(1),
           SALES_ORG(4),
           DISTR_CHAN(2),
           DEL_FLAG1(1),
           MIN_ORDER(13),
          SALES_ORG1(4),
          DISTR_CHAN1(2),
          DEL_FLAG2(1),
          MIN_ORDER1(1),
           LANGU(2),
          MATL_DESC(40),
       END OF TY_MAT.
    DATA: IT_DATA TYPE TABLE OF TY_MAT,
          WA_DATA LIKE LINE  OF IT_DATA.
    *decalraing flag
    data: v_flag value ''.
    *DECLARING WORK AREAs  TO BE PASSED TO THE FUNCTION MODULE.
    DATA: BAPI_HEAD LIKE BAPIMATHEAD,
          BAPI_CLIENTDATA LIKE BAPI_MARA,
          BAPI_CLIENTDATAX LIKE BAPI_MARAX,
          BAPI_PLANTDATA LIKE BAPI_MARC,
          BAPI_PLANTDATAX LIKE  BAPI_MARCX,
          BAPI_STORAGELOCATIONDATA LIKE BAPI_MARD,
          BAPI_STORAGELOCATIONDATAX LIKE BAPI_MARDX,
          BAPI_SALESDATA LIKE BAPI_MVKE,
          BAPI_SALESDATAX LIKE BAPI_MVKEX,
          BAPI_MAKT LIKE BAPI_MAKT,
          BAPI_RETURN LIKE BAPIRET2.
    *INTERNAL TABLE TO HOLD THE MATERIAL DESCRIPTION
    DATA: BEGIN OF IT_MAKT OCCURS 0.
    INCLUDE STRUCTURE BAPI_MAKT.
    DATA END OF IT_MAKT.
    DATA:BEGIN OF IT_RET OCCURS 0.
    INCLUDE STRUCTURE BAPIRET2.
    DATA END OF IT_RET.
    *INTERNAL TABLE TO HOLD HEADER DATA
    DATA: IT_EXCEL TYPE ALSMEX_TABLINE OCCURS 0 WITH HEADER LINE.
    *SELECTION-SCREEN ELEMENTS
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    PARAMETER: FNAME TYPE RLGRAP-FILENAME OBLIGATORY DEFAULT 'C:\Documents and Settings\Administrator\Desktop\MATMAS.XLS' .
    PARAMETERS: P_BEGCOL TYPE I DEFAULT 1 NO-DISPLAY,
                P_BEGROW TYPE I DEFAULT 1 NO-DISPLAY,
                P_ENDCOL TYPE I DEFAULT 100 NO-DISPLAY,
                P_ENDROW TYPE I DEFAULT 32000 NO-DISPLAY.
    SELECTION-SCREEN END OF BLOCK B1.
    *DECLARATION OF EXCELAL TABLE
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR FNAME.
    PERFORM F_GET_FILE USING FNAME.
    START-OF-SELECTION.
    PERFORM F_XLS_ITAB USING FNAME
                       CHANGING IT_EXCEL.
    PERFORM F_MOVE_DATA.
    perform F_GET_DATA.
    *&      Form  F_GET_FILE
          text
         -->P_FNAME  text
         <--P_SY_SUBRC  text
    FORM F_GET_FILE  USING    P_FNAME LIKE FNAME.
    CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
    EXPORTING
       PROGRAM_NAME        = SYST-REPID
       DYNPRO_NUMBER       = SYST-DYNNR
      FIELD_NAME          = ' '
      STATIC              = ' '
      MASK                = ' '
      CHANGING
        FILE_NAME           = P_FNAME
    EXCEPTIONS
      MASK_TOO_LONG       = 1
      OTHERS              = 2
    IF SY-SUBRC <> 0.
    MESSAGE E006(ZHNC).
    ENDIF.
    ENDFORM.                    " F_GET_FILE
    *&      Form  F_XLS_ITAB
          text
         -->P_FNAME  text
         <--P_IT_EXCEL  text
    FORM F_XLS_ITAB  USING    P_FNAME
                     CHANGING P_IT_EXCEL.
    CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
      EXPORTING
        FILENAME                      = FNAME
        I_BEGIN_COL                   = P_BEGCOL
        I_BEGIN_ROW                   = P_BEGROW
        I_END_COL                     = P_ENDCOL
        I_END_ROW                     = P_ENDROW
      TABLES
        INTERN                        = IT_EXCEL
    EXCEPTIONS
       INCONSISTENT_PARAMETERS       = 1
       UPLOAD_OLE                    = 2
       OTHERS                        = 3
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDFORM.                    " F_XLS_ITAB
    *&      Form  F_MOVE_DATA
          text
    -->  p1        text
    <--  p2        text
    FORM F_MOVE_DATA .
    DATA : LV_INDEX TYPE I.
    FIELD-SYMBOLS <FS>.
    *--- Sorting the internal table
    SORT IT_EXCEL BY ROW COL.
    CLEAR IT_EXCEL.
    LOOP AT IT_EXCEL.
    MOVE IT_EXCEL-COL TO LV_INDEX.
    *--- Assigning the each record to an internal table row
    ASSIGN COMPONENT LV_INDEX OF STRUCTURE WA_DATA TO <FS>.
    *--- Asigning the field value to a field symbol
    MOVE IT_EXCEL-VALUE TO <FS>.
    AT END OF ROW.
    APPEND WA_DATA TO IT_DATA.
    CLEAR WA_DATA.
    ENDAT.
    ENDLOOP.
    ENDFORM.                    " F_MOVE_DATA
    *&      Form  F_GET_DATA
          text
    -->  p1        text
    <--  p2        text
    FORM F_GET_DATA .
    LOOP AT IT_DATA INTO WA_DATA.
    MOVE-CORRESPONDING WA_DATA  TO  BAPI_HEAD.
    BAPI_HEAD-BASIC_VIEW ='X'.
    BAPI_HEAD-SALES_VIEW ='X'.
    BAPI_HEAD-PURCHASE_VIEW ='X'.
    BAPI_HEAD-STORAGE_VIEW ='X'.
    MOVE-CORRESPONDING WA_DATA TO BAPI_CLIENTDATA.
    BAPI_CLIENTDATAX-MATL_GROUP = 'X'.
    BAPI_CLIENTDATAX-BASE_UOM = 'X'.
    BAPI_CLIENTDATAX-BASE_UOM_ISO = 'X'.
    MOVE-CORRESPONDING WA_DATA TO BAPI_PLANTDATA.
    BAPI_PLANTDATAX-PLANT = BAPI_PLANTDATA-PLANT.
    BAPI_PLANTDATAX-DEL_FLAG = 'X'.
    BAPI_PLANTDATAX-PUR_GROUP = 'X'.
    BAPI_PLANTDATAX-BASE_QTY = 'X'.
    MOVE-CORRESPONDING WA_DATA TO BAPI_STORAGELOCATIONDATA.
    BAPI_STORAGELOCATIONDATA-PLANT = BAPI_PLANTDATA-PLANT.
    BAPI_STORAGELOCATIONDATAX-PLANT = BAPI_STORAGELOCATIONDATA-PLANT.
    BAPI_STORAGELOCATIONDATAX-STGE_LOC = BAPI_STORAGELOCATIONDATA-STGE_LOC.
    BAPI_STORAGELOCATIONDATAX-MRP_IND = 'X'.
    MOVE-CORRESPONDING WA_DATA TO BAPI_SALESDATA.
    BAPI_SALESDATAX-SALES_ORG = BAPI_SALESDATA-SALES_ORG.
    BAPI_SALESDATAX-DISTR_CHAN = BAPI_SALESDATA-DISTR_CHAN.
    BAPI_SALESDATAX-DEL_FLAG = BAPI_SALESDATA-DEL_FLAG.
    BAPI_SALESDATAX-MIN_ORDER = 'X'.
    REFRESH IT_MAKT.
    IT_MAKT-LANGU = WA_DATA-LANGU.
    IT_MAKT-MATL_DESC = WA_DATA-MATL_DESC.
    APPEND IT_MAKT.
    CLEAR IT_RET.
    REFRESH IT_RET.
    PERFORM F_CALL_BAPI.
    READ TABLE IT_RET WITH KEY TYPE = 'S'.
    IF SY-SUBRC EQ 0.
    PERFORM F_BAPI_COMMIT.
    WRITE:/ 'MATERIAL CREATED OR UPDATED SUCESSFULLY WITH MATERIAL NO',WA_DATA-MATERIAL.
    ELSE.
    MESSAGE E000(ZHNC) WITH 'ERROR IN CREATING THE MATERIAL'.
    *WRITE: / 'ERROR IN CREATIN MATERIAL',IT_RET-MESSAGE.
    *PERFORM F_DOWNLOAD.
    ENDIF.
    *ENDIF.
    ENDLOOP.
    ENDFORM.                    " F_GET_DATA
    *&      Form  F_CALL_BAPI
          text
    -->  p1        text
    <--  p2        text
    FORM F_CALL_BAPI .
    CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
      EXPORTING
        HEADDATA                   = BAPI_HEAD
       CLIENTDATA                 =  BAPI_CLIENTDATA
       CLIENTDATAX                =  BAPI_CLIENTDATAX
       PLANTDATA                  =  BAPI_PLANTDATA
       PLANTDATAX                 =  BAPI_PLANTDATAX
       STORAGELOCATIONDATA        =  BAPI_STORAGELOCATIONDATA
       STORAGELOCATIONDATAX       =  BAPI_STORAGELOCATIONDATAX
       SALESDATA                  =  BAPI_SALESDATA
       SALESDATAX                 =  BAPI_SALESDATAX
    IMPORTING
       RETURN                     =  IT_RET
    TABLES
       MATERIALDESCRIPTION        = IT_MAKT
      UNITSOFMEASURE             =
      UNITSOFMEASUREX            =
      INTERNATIONALARTNOS        =
      MATERIALLONGTEXT           =
      TAXCLASSIFICATIONS         =
      RETURNMESSAGES             =
      PRTDATA                    =
      PRTDATAX                   =
      EXTENSIONIN                =
      EXTENSIONINX               =
    APPEND IT_RET.
    ENDFORM.                    " F_CALL_BAPI
    *&      Form  F_BAPI_COMMIT
          text
    -->  p1        text
    <--  p2        text
    FORM F_BAPI_COMMIT .
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      WAIT         =
    IMPORTING
      RETURN        =
    ENDFORM.                    " F_BAPI_COMMIT

  • Material Master ------ Distribution channel block

    Dear Experts
    There is a doubt when we give the status indiacator in the MMR in the sales org 1 that this product is obsolete will not be used in the sales organization  and distribution channel.
    the system does not give the error only the delivery cannot be created from such order but how will the user understand that thsi product is obsolete or replaced or closed down.
    there is no pop up message,
    regards,
    A  S

    You can make it as a warning or error message. 
    To achieve this,  in material master whatever value you have maintained in the said field, make a note of the same.
    Now go to TCode OVSU, double click on the status which you have assigned in Material Master so that you can see list of documents that can be blocked.  Wherever you maintain B  the end user cannot create that document.
    Check this and post the feedback in case still you have any issues.
    thanks
    G. Lakshmipathi

  • Material master update through BAPI

    Hello Experts,
    We are using BAPI_MATERIAL_SAVEREPLICA to update material master . It is required to update RefPlant:consumption (MARC-VRBWK) in forecast view . We could not find any field corresponding to MARC-VRBWK in table parameters PLANTDATA .
    Please help me if there is any way to update  RefPlant:consumption (MARC-VRBWK ) in forecast view by using  BAPI_MATERIAL_SAVEREPLICA  .
    If there is any other BAPI to update the field please let me know .
    Regards,
    Kiran.

    Hi Suhas,
    I tried EXTENSIONIN & EXTENSIONINX  approach but the MARC-VRBWK was not reflected. I did some research and came to know that these extensions can be used to update the custom fields . If there is any way to update the standard field like MARC-VRBWK  using extension please let me know . It would be great help .
    Thanks,
    Kiran.

  • Loading flash through ajax does not work in IE 6.

    Hi all,
    I am having some problems on a site I'm developing. When I
    load a video from youtube, etc, and do so dynamically through ajax,
    it does not work on IE 6. Mind you it does work on all other
    browsers. This problem happens with multiple copies of IE 6 so it
    is reproducible. Not sure if there are any web devs here but any
    help would be greatly appreciated.

    Well, this probably belongs over in the Flash forum. That's
    where the developer questions go.. It's surely a matter of the way
    the code is written (or possibly the paths to the different
    components. There are security restrictions on certain types of
    loading that may also come into play. Hard to tell without more
    detail.

  • Controlling material master access through field groups

    Hello SAP Gurus,
    We want to control the material master access (MM01/02) using field groups. I am unable to find any authorization object provided by SAP which can control access at field group level.
    My scenarios is that certain group of people should be able to only display the fields in MM02 tcode and certain group of people should be able to change it. Please suggest if there is any config which will enable me to do this.
    Thanks and Regards
    Amit Gupta

    Dear usen the following authorization object to contol the field entry on view level,
    I donot think at field group level it is there
    M_MATE_STA
    status are nothiong but views
    A     Work scheduling
    B     Accounting
    C     Classification
    D     MRP
    E     Purchasing
    F     Production resources/tools
    G     Costing
    K     Basic data
    L     Storage
    P     Forecasting
    Q     Quality management
    S     Warehouse management
    V     Sales
    X     Plant stocks
    Z     Storage location stocks

  • Sound Output through external speakers not working

    For some reason, the sound output to my JBL speaker system that is connected through the headphones jack of my iMac has cut out. When I go to the Sound Preferance panel, under Output, my choices are :
    Internal Speakers
    Soundflower (2CH)
    Soundflower (16CH)
    I have NO idea what these Soundflower things are, and don't see a standard "Headphones" option, which is the jack they are plugged into. I also don't see a way to delete these Soundflower "devices".
    The sound output not working seemed to happen after a power outage in my building, so I'm going to try a powerreset of the iMac, but still not sure what is going on with this Soundflower stuff.

    /System/Library/Extensions/Soundflower.kext and restarting your computer uninstalls Soundflower.
    To remove preference panes, context-click on the preference pane's icon and select the Remove option.
    https://getsatisfaction.com/cycling74/topics/how_to_uninstall
    Long shot, but...
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

  • Smartview v11.1.1.3 drill through reports does not work in grids?

    Hi,
    I'm using v11.1.1.3 and know there is a drill through function to FDM from Smartview grids. I've tried but it does not work in the grids, only works in the forms. However, I'm able to drill through to FDM from workspace grids. Does anyone encounters the same?? Appreciate any kinds advices. Thanks!

    Are you certian that the report is showing an input level cell? Often reports are designed to run at Total dimension members, i.e. <Entity Curr Total> which you can not drill into.

Maybe you are looking for