Material master download
Hi all,
I read the help.sap.com and found that all materials information (classes, characterisctics and characteristic values) can be downloaded via the adapter object SCE if a knowledge base object and its run-time version is created in R/3.
Has anyone downloaded the information via adapter object SCE.
Also from the documentation in R/3, I found that characteristics in R/3 is equivalent as attributes in CRM. Now if characteristics in R/3 if downloaded via SCE object will the characteristics appear automatically as attributes in COMMPR01 Transaction.
Or
These characteristics will appear only in PME tool only.
Could somebody help me in this. Any help will be highly appreciated.
Thanks in advance
Middleware developer
Hi Jothi,
Referring to your question, use PME when only create
the configurable product in CRM. From my experience,
I don't use it when downloading configurable product
from R/3.
Hope this answer your question.
Cheers,
Gun.
Similar Messages
-
Error in Material Master download
Dear all,
We are in SRM 4.0 with support pack level 11. We have revalidated our setting as per sap note 720819 as well. While downloading the material master from ECC system we are facing this error in our inbound queue.
"Function module "CRM_DOWNLOAD_RCV_EXIT" not found"
Kindly suggest the solution.
Regards
Dinesh SinghHi,
See these threads for more pointer/info:
Re: Function module "CRM_DOWNLOAD_RCV_EXIT" not found error
Re: ERROR MESSAGE IN SQM2
Also see whether all the steps have been performed as mentioned in this weblog:
How to replicate material master from R/3 to SRM
BR,
Disha. -
Material Master download to file using Idocs
I need to download Material Master to Application server or local PC using Idoc's. Is there a way to achieve this?
Hi,
You can use the userexit available in material master outbound function module to download the data into file and trigger an event which can call a workflow that by default set the status of the IDoc to not to be processed 31 or configure new status 28(as IDoc being monitored) and use the workflow to view the material file and release the IDoc if OK by resetting the status to 30 or mark it for deletion or as error by setting it to 31.
Sirish -
Downloading Material Master data from ECC to CRM
Hello friends, I am working in CRM 5.0., I am finding difficulty in downloading Material master created in ECC to a Product Master in CRM. Can you please tell me how to use Customizations to download the material master to product master.
Hi Rghunandan,
To carry out the product replication from ECC to CRM,you need to carry out the foll steps.
First download the customizing objects using R3AS
DNL_CUST_PROD0 u2013 Material number conversions
DNL_CUST_PROD1 u2013 Product : Categories
DNL_CUST_PROD3 u2013 Material : R/3 sales status
DNL_CUST_SPROD u2013 Sales product item
DNL_PLANT - Plant
To download products foll the steps below
1.Defining Product ID Settings -COMCPRFORMAT
Cross-Application Components SAP Products Basic Settings Define Output Format and Storage Form of Product Ids
This activity describes how to synchronize the product Ids in the CRM system and the R/3 system.
The material master length is R/3 is defined in transaction code OMSL and is set to 18. (also check note no. 545824)
2.Make sure that CRM item categories and R/3 item categories are the same.
In CRM, item categories and item category groups are seen via
Customer Relationship Management Transactions Basic Settings
3.Selecting specific objects for replication : R3AC1
Use adapter object MATERIAL
Use filter settings tab and specify the material or a range of products you want to download .Use atble name MARA,field MATNR use an approriate operator and mention theproduct you want to downlaod.
4.Replicate Materials : R3AS
mention the adaptor object Material and execute
Regards
Itty -
Hi,
I want to download the material master data in to csv file.
is there any standard program available?Please guide me.
Regards,
sureshHi Suresh,
If you are looking for entries in table MARA (material master table) or MARC then you probably don't need any report rather use se12 and there is option for exporting the content of the table in a CSV file..
Please let me know if my understanding is right.
Thanks
Ajay -
Gurus,
Aside from getting all the tables, selecting all the fields from each table, and appending it all into one table...
How do I download the Material master records into text file?
Thankshi goldust,
check this in google,
http://help.sap.com/saphelp_45b/helpdata/en/f6/ca076ca7a911d1950500a0c930e0da/content.htm
with regards,
asif. -
Programe Name for Downloading Material master
hello,
i want to know is there anuy standard program for downloading complete material master data in 4.6c only
regards
farukhHi,
use this BAPI's and get the data.
<b>BAPI_MATERIAL_GETALL
BAPI_MATERIAL_GET_ALL</b>
try this also..
BAPI_MATERIAL_GET_DETAIL
Regards
vijay -
No Material Master replication from R/3 to CRM
Hallo guys,
i've got no replication of material master, haven't tried any other object except customizing but customizing is triggered from CRM and was replicated fine. Can anybody help me how can i debug the replication process from R/3?
Thanks for your help in advance.Dmitry,
You first need to determine where your errors are happening?
1. Do you have blocked queues on CRM? If you see a blocked inbound/outbound queue on CRM via SMQ1 or SMQ2, then you can try to rerun the BDOC message in the queue.
2. Is there tax code customizing not downloaded correctly into CRM? This sometimes can hang up your download of materials?
3. Have you looked at SMW01 after the load to see if you have any BDOC's in error, the queues were empty?
4. What is the status of the initial load R3AM1?
I would hold off from debugging until I figure out where in the download process that I am receiving the error. Once I know that fact them I can debug a single download. You will have to set a filter on the material object to a single material and attempt an initial download. When you perform the initial download you will need all queues deregistered on the CRM side, so that you manually execute the BDOC import into CRM.
The last step will require placing a breakpoint into the validation function module for material.
I believe validation function module is: COM_PRODUCT_MAT_VALIDATE. If you have questions along the way of debugging the flow, please reply back and I will try to see if I can answer them. It has been a little while since I had to debug our middleware downloads.
Good Luck,
Stephen -
Error while creatting the Material Master IDOC in ERP 2005
Hello All,
I am trying to create scenario from RFID-Enabled Outbound Processing - Conf Guide (SAP AII 4.0).
I am using Auto ID 4.0 on a NW04s system. The backend is a ERP2005 system.
The scenario requires that I need to create a material in the backend and send it to the NW04s system using IDOCs.
After completing the configuration on the backend, I tried sending the Material Master IDOC to Auto ID from the transaction AIDMM. I get a message that IDOC is just being created. But I could not find it in the transaction WE02.
On debugging I found that the function MARD_GENERIC_READ_MATNR_PLANT resulted in error.
Thanks for any kind of input.
Regards,
Rahul
Message was edited by:
Rahul GavandeDear,
Check ABAPer for file settings.
- CANNOT_SKIP_ATTRIBUTE_RECORD : The attributes could not be read in the EPS parcel. The file cannot be opened for reading, because it may have been deleted in the meantime.
- CANNOT_DETERMINE_EPS_PARCEL : The EPS parcel is not in the EPS Inbox, because it may have been deleted. You must download the relevant patch again (for example, Hot Package).
- CANNOT_DETERMINE_DATA_FILES : The name of a data file could not be determined, because a profile parameter was not correctly configured. Check the settings using the report RSPARAM.
- CANNOT_DISASSEMBLE_R_DATA_FILE : An R3trans data file could not be unpacked. A possible error source is that the relevant EPS parcel was not found. The data file could not be opened for writing. An error occurred when transmitting a 20K block from the EPS Inbox to the directory /usr/sap/trans/data (UNIX).
- CANNOT_DISASSEMBLE_D_DATA_FILE : An ADO data file could not be unpacked. The reasons are the same as with the message CANNOT_DISASSEMBLE_R_DATA_FILE .
- CANNOT_CREATE_COFILE : The cofile could not be created from the relevant data file. One possible error source is that <sys>adm does not have write authorization for the directory /usr/sap/trans/cofiles (UNIX).
Check Note: 70752.
Regards,
Syed Hussain. -
Material Master replication ... ECC to CRM
I have a requirement to replicate a material master record from ECC to CRM, based upon an 'external event' (i.e. an event other than the change of the material master record itself, in ECC). The event is the change in status of a record in a z-table.
What is the best way to accomplish this? Is there a function module or BAPI that I can call, to trigger the replication of a material to CRM, whenever this event occurs? Are there other suggested / better approaches to satisfying this requirement?
Your help will be much appreciated!
Thanks,
DuaneIf your CRM system is new then you have to do the initial download of material from ECC to CRM. To do that first download the material customizing object (like category. group etc), from transaction R3AS (CRM side) then download the product/Material.
After do the initial download, activate the change pointer for the material related message type (matmas etc..)from transaction SALE (ECC). And schedule I job to run its on daily basis.
If can check the below link for details
[http://help.sap.com/saphelp_crm52/helpdata/EN/46/57605301a208e7e10000000a114a6b/content.htm]
Thanks
Subhankar
Edited by: Subhankar Garani on Sep 1, 2011 12:21 AM -
Initial Transfer of Material Master to GTS
Currently we are looking to transfer material master records(Initial) specific to only few plants as the GTS implementation is with respective to only a specific country. We have about 250,000 material master records from this plant but the MARA table in the feeder which stretches across multiple countries has a count of 4 Million.
We intend to develop an enhancement around the user exit SAPLSLL_LEG_PRR3_002 to support this requirement.
Is there a way to transfer this data without an enhancement only restricting to specific plants? My understanding is this would be an issue which is common to implementation teamsas usually only one or few countries go live on GTS per release.Hi,
You will have to code this filtering logic in the user exit that you had mentioned. There is no standard delivered solution for this.
Btw, when you say you are going to use initial transfer option any other specific reason for looking into filter logic?
Selection screen of initial transfer has material number as input. Why not download ur 250000 product and transfer those in chunks. Just a QN.
But filtering material transfer is possible with enhancement.
Regards
Dhilipan -
SAP Business Connector with Java (material master data)
Hey,
I have a question about the SAP BC. What are the steps I have to do, to use the BC with a Java program?
My task is to create a program which downloads material master datas from SAP.
I just installed the BC, and hope, that I did it correctly
Many thanks in advance!!
Kind regards,
Alex
German Version:
Hey,
wie ich oben schon geschrieben habe, habe ich ein paar Fragen zum SAP BC. Ich habe ein Hochschul-Projekt und muss hierfür Materialstammdaten aus SAP herunterladen und mit einem Java Programm ausgeben lassen.
Kann mir vielleicht jemand weiterhelfen, wie die Schritte hierfür aussehen?! Wie verbinde ich den BC mit meinem SAP System? und wie bekomme ich anschließen die Daten mit einem Java Programm ausgelesen?
Ich habe bereits den BC installiert und konnte mich meines Wissens auch richtig anmelden;-)
Ich hoffe, dass mir jemand weiterhelfen kann und bedanke mich schon im Voraus für eventuelle Antworten!!!
Viele Grüße
Alex
Edited by: Rolf Gersbacher on May 19, 2010 10:34 PMHi,
I work with SAP BC some time ago... I remember that you configure the connection in SM59 / SICF and the server open a port to "listen" (connect external).
So, your external program can execute functions inside SAP and exchange data.
See some links:
http://en.wikipedia.org/wiki/SAP_Business_Connector
http://help.sap.com/saphelp_nw04/helpdata/en/6a/3f93404f673028e10000000a1550b0/frameset.htm
http://www.thespot4sap.com/articles/SAP_XML_Business_Integration.asp
Best regards,
Leandro Mengue -
Material Master: All part numbers from one vendor
Hi everyone,
is it possible to list all part numbers supplied by a defined vendor - in the material master?
I was told by our purchasing department that ME2L would do the job, however I'm not authorized to execute the transaction (for no reasons) and our admin is on holidays ;-)
I'm sure a similar report must be available in another way...
Any suggestions?Roman,
ME2L is the SAP standard listing of purchase orders by vendor; it is not necessarily a comprehensive list of 'all part numbers supplied by a defined vendor - in the material master'.
If, however, this is adequate for your purposes, you could try other standard Purchase order listing transactions:
ME2W, ME2M, ME2C, ME2N.
Assuming those transactions are not available to you, you might want to download the raw purchase orders from the tables using a table browser such as SE16N:
EKKO which contains the purchase order number and the vendor number
EKPO which contains the purchase order number and the material number.
Joining these two using desktop software would give you similar info that you would get from ME2L.
As I stated earlier, ME2L doesn't really meet the requirements you stated. The listing that actually meets the requirements depends upon your company's business processes. In some companies, that listing would have to come from the purchase info records. Such a listing is available from ME1L and a few others.
Best Regards,
DB49 -
Print DMS Document from Material master
Hello All,
Can you advice on how to Print the DMS Document as a smartforms from Material master ?Hi Arvind,
You have mentioned two different terminologies here.
DMS
Material Master
From DMS, you need to download the attachment and the same attachment can be converted using the FM CONVERT_TO_OTF then try displaying the same into your smartform.
I'm not aware of Material Master Document attachment.
Will reply soon with that solution also.
Regards,
-Wahid Hussain. -
Lsmw : Direct Input : 0020 Material Master :Error
hi all !
I'm onto making a lsmw for material master direct input.i'm facing the following error :
1.The field Marc-LADGR is defined as a required field : it doesnt contain an entry
2.You have not fully maintained the tax classifications.
in my flat file i have duly filled in the field MARC-LADGR
need help ,plz see if you can track wats the problem.
thanks and regards,
sachinya sachin ... as u r telling .. download from the std program... & continue the process....
my suggestion ... cross check again with ur fields of the source structure ....i mean decalre only fields .. which are required .. then do the field mapping again for the all the fields...
i believe there will be documentation for the std program .... check it & go thru with that ..map it ... wherever needed ....
try & let me know...
thanks,
manjunath ms
Maybe you are looking for
-
Customer Exit IMRC0001 for condition based preventive maintenance
Dear Experts, I am using customer Exit IMRC0001 for creating maintenance order if my measuring point reading exeeds the thresold value or it is out of the upper and lower limit range , which i have set for that particular Measuring point. This scena
-
Tcode ME91F mail sending issues in PO reminder with smartform layout
Hi, I am facing one problem while executing ME91F tcode. When i assign script in NACE transaction to print the PO reminder layout through ME91F and send the PO to vendor of that PO through mail. I am able to send it. But When i do the same through sm
-
I've downloaded the latest iTunes so many times now, and tried uninstalling all all Apple software and deleted all the iTunes files on my computer and then redownloading it and it continues to give me that message. I am at a loss of what to do now. T
-
Upgrade of Oracle forms and reports on 6i to Oracle 11g
Dear All, I wish to know the level of support for running Oracle 6i forms and reports over Oracle Database 10.2.0.5. Is this currently supported by Oracle ? If yes, is there any supporting document? Secondly, how can I make my forms and reports runni
-
Adobe Photoshop Elements is the subject
I change from Windows XP to Windows 7 and 8. I can't load my Adobe Photoshop Elements CD record on either W 7 or W 8. Thank you for your help: how can y charge this CD a computer equiped with W7 or W8. Novy