Material master error in sales order??/

Hi SAP gurus
While creating sales order after copying the standard material from IDES its giving a error message ""material not determined for sales organization 1000, dist ch 10,language DE""
PLz provide the solution for the same

HI
pls check below
Check the sales area in which for u r material, customer and sale doc
Whether the Sales area is same for u r Material, Customer and Sales Doc.
if so refer below
In training version of SAP, IDES is used everywhere.
In which they have given 1000 as the model company which is located in Country: DE= Germany ( as per the company code 1000 configuration)
when you are working on system , by default we login EN language.
This conversion hasn't maintained for; your material while creating.
So go to MM02, click on additional data, here u maintain the
language -
Description as
EN----
test material
DE----
Test material
and save the MMR.
Now create Order and see the results

Similar Messages

  • Error reading material cost estimate for sales order (KE292)

    Dear All,
    I have an issue with billing. we are posting july month transactions, the material cost is maintained through MR21. When releasing billing document for accounting we are getting error message like"Error reading the material cost estimate for sales order "11"
    Message no. KE292
    Diagnosis
    In Profitability Analysis (CO-PA), the system tried to valuate item 000010 of sales order 11 by reading the corresponding product cost estimate.
    However, no product cost estimate could be found for this sales order item.
    The system accessed product costing for product AMLFP011011XX00P using costing key YB3 as defined in the
    CO-PA Customizing settings.
    System Response
    The system cannot process the document any further.
    Procedure
    Check your Customizing settings."
    We cross checked with other client as a current date and we ran cost estimate through CK40N with same material. and we posted entries. Here it is working fine. but in above process it is not working. Can you pls guide me where i missed.
    Regards,
    Nagaraju,

    Hi,
    When the Costing Key is assigned to the material types in the COPA customizing, then system expects Cost estimation when billing is released to Accounts.
    If you dont run cost estimation but update the material master through MR21, system will not accept as in the Costing key configuration you must have selected the Current Standard price field for the valuation.
    Hence, try to run cost estimation and then do releasing.
    Thanks & Regards
    Ravi Kumar

  • Error in Sales Order Creation - Template material processing is deactivated

    HI,
    I am getting the following error in all clients in my server while creating the sales order. I am getting this after uploading the Patch 17,probably.
    what should i do! All settings given by message below are tried, but not helping.
    Template material processing is deactivated
    Message no. CB01412
    Diagnosis
    You attempted to enter a material in an SD document that is set as a template or one-time material. An error occurred that can have the following causes:
    Template and one-time material processing is not activated
    No determination routine is specified for the SD documents for the permitted combinations
    The combination of sales organization, document category, and document type or delivery type for the SD document is not permitted
    System response
    The system prevents you editing the document any further.
    Procedure
    Activate template and one-time material processing in the IMG activity Activate Dangerous Goods Checks.
    Edit the determination routines in the IMG activity Specify Determination Routines for Sales and Shipping Documents.
    Edit the IMG activities Specify Permitted Combinations for Sales Documents and
    Specify Permitted Combinations for Shipping Documents.
    Thanks in advance.

    Hi,
    Go to MM03 and check the material (you are creating sales order ) wheather sales views selected or not.
    Regards,
    Biju K

  • Error in Sales order - Consumption account not found

    Hi Gurus,
    I am facing an error in Sales order - 'Consumption account not found'. The scenario is third party. In sales order, it says 'Consumption account not found'. the item category is TAS and scedule line category has general modification key 'VKA'. And as it is third party, thr is no movement type for the schedule line category. The valuation  class of the material is 3334 (software services). I was thinking In OBYC, under GBB key, this combination of my val. grping code+ 3334 + VKA and relevant GLs shud exist.
    But in my development client, i dont get any error for the same material. And in thr also, thr is no mention of entry like above combination in OBYC. So its making me think that its not config error. But its an issue of master data or GL data.
    Please help me . This is critical.
    -Prashant

    Hi,
    Your observation is perfectly write, the possible errors are
    1.  Check the combination of Account modifier of Purchase order account assignmnet or PR.  Based on the modifier and check the relevent combination in OBYC
    Valuation ClassAccount ModifierIf Groups is there + Transaction Event Key + Gl Accounts
    2.  If GL Account is available then check the GL Master through FS00 for validation of mandatory consumption is required and i feel there is no issue with material master.
    Rewards if it helps
    Regards
    Goutham

  • Itm cat Error in sales order

    Gurus,
    I am facing an error in sales order creation.
    When I enter the material and qty and press enter, I am getting an error saying the Item category is not defined.
    have anyone came across this error, kindly help

    HI,
    Generally item category is determined by the combination of
    sales doc type + item cat grp +usage + high level itm cat(if any).
    so check whether the above requirements are fulfilled i.e  for the sales doc type (if customised) and item category (maintained in mat master sales org-2) are maintained in VOV4 or not.
    Reward points if helpful.
    regards,
    gupta.

  • Delivery to copy weights,volumes from material master,instead of sales ord

    hi,
    The weights/volumes get copied from the material master to the sales doc and from the sales doc to the delivery.
    We have a issue where proper weights/volumes are not known at the order entry. thus when the new weights etc are noted, they change it in the material master.
    could some one please let me know how to configure the system to take the values from the material master for these instead of the sales doc to get the weights/volumes.
    that is the delivery doc should get the weight and volume from the material master(changed values)
    Appreciate your help on this.
    Thanks & Regards,
    Keshini

    Hi Keshini
    So , lets assume that you have created a sales order for the material MAT1 and it has Net weight 5kg & Gross weight 6kg ,Now the sales order status is open you have not yet delivered that order and you have changed the Net weight 10kg & Gross weight 14kg. So you want to update that open sales order to Net weight 10kg & Gross weight 14kg. If that is the problem then just go to VA05 and give the material (MATNR) and check the box open sales orders then you will get the open sales orders then in the menu you select to carryout the net weight & gross weight there you can change .and then you can do delivery then the updation will take place in the Net weight & Gross weight also
    Regards
    Srinath

  • Pricing Error on Sales order :Critical:

    Hi all,
    I'm creating a sales order,  where in I'm getting Pricing Error.
    Condition record is maintained for PR00 in USD
    It is getting populated but showing red signal.
    VPRS also showing Red signal. If I go in analysis of VPRS , it shows message exchage rate error. But Company code currency & document currency is same USD.
    so It should not give this error.
    But If I go to customer master & in sales area tab & maintain currency as USD, then there is no error in Sales order. All is fine.
    But logically , system should not ask the exchage rate as Company code & document currency both are USD.
    I expect some quick replies as we are now in impact analysis & on verge of go live next month.

    Thats what I mention in previous post that
    Its a standard beheviour, Document currency is proposed/determined in sales order or billing doc on the bases of customer master record of the Sold-to Party.
    And exchange rate for same currency is out of question.
    Thats why, when maintain curreny in customer master (Sold-to Party), you don't get error.
    As, system is able determine/propose a currency for document currency.
    Further, what you can do is press F1 button on the following fie,lds for more clarification.
    > Sales Order - Header  - Sales Tab - Pricing & Statistics Section - Doc. Currency Field
    > Customer Master - Sold-to Party - Sales Data - Sales Tab - Currency Field
    I hope that clarifies.
    Regards
    JP

  • Material Specific Field in Sales order....

    Hi Experts,
    Is there any possibilities of maintaining material specific characters at sales order item level?...
    For example if we want store the Materials character as A in sales order does standard SAP supports it?......
    Thanks in advance......

    Hi,
    Can you let us know the funda behind the character you are using to better understand and help you.
    One way is as suggested earlier. or you can use the VD51  if you are not using it right now..
    Let us know.
    Regards,
    SB

  • Mass extension of material master to differnt sales area

    Hi,
    How can we extend material master to different sales area enmasse.?
    Regards
    Kantha

    A material master is not just linked to a sales area.
    you have to create sales views per sales org and distribution channel.
    there are many fields in there that need to be maintained, SAP stores this info in table KNVV
    if all data in the new sales area is equal to an existing sales area, then you can easily extend using MM17, if not, then you have to use LSMW.
    MMSC_MASS is for storage location extension, this is certainly not a transaction to create sales area data views.

  • Material documents based on Sales order

    Dear Experts,
    We are developing a report where I need to extract the list of material documents with movement type 411E and 412E based on the sales order. This data is available in MSEG but after designing the report, Its performance was  very poor hence we could not move the report to production.
    As MSEG is a cluster table it is taking to much time. I checked other tables MKPF MSSA but nothing is working out. Is there any way out to improve the performance of the report by taking the list of material documents based on sales order and movement types 411E and 412E .
    Please suggest me with suitable solution.
    I will reward the points immediately.
    With Regards
    Uday

    Hope you are not trying to join MKPF and MSEG currently:
    821722 - Performance of the join on MSEG and MKPF
    If you are below release 606 in your system, this note will have to be implemented in your system to bring redundant fields of MKPF into MSEG for performance improvement:
    1516684 - MKPF fields added to MSEG - Performance optimization
    The blog shared by Jurgen is pretty well explained. In addition have a look at these notes:
    1638997 - Performance: CKMDUVMAT selection with new fields in MSEG
    1558298 - MB5B: Redesign of selection for performance optimization
    1550000 - MB51: Redesign of selection for performance optimization

  • Error in sales order when selecting a warranty item in configurator 'Please enter required information - Service Reference Type Code'

    Error in sales order when selecting a warranty item in configurator 'Please enter required information - Service Reference Type Code'
    Not able to book the sales order because of this issue

    Order Management does not support the inclusion of optional service items in a configured Model BOM (see Support article #1296751.1 for more detail).  Allowing for such would therefore require customization.
    As you've found, there's no modeling restriction that prevents you from creating a Model BOM that includes optional service items, nor is there any problem with creating a Configurator Model for it.  And required service items (such as a warranty item that is a required child of an optional BOM component) do not present a problem; they have nothing to do with Configurator, and would never appear as sub-lines in OM.  The problem arises in OM, which requires that any service item be "associated" to the item it's "servicing".  OM does not automatically make such an association with service sub-lines, even though it might be argued that an association may be inferred by the BOM structure (i.e., OM does not assume that an optional service sub-line is necessarily associated, from a service standpoint, with its BOM parent).  OM customization is therefore required in order to hook any service item up to its corresponding product item.  Many customers who configure service along with product have implemented such a customization.
    (Another gap in such a solution that may be relevant to you is that for an included optional service item requiring recurring billing, Order Management does not create the requisite Service Contract.  Customers have likewise developed customizations to address this, as well.)
    As this is not specifically a Configurator matter (you could have created your order without using Configurator at all, and you would have experienced the exact same behavior), please do not take my explanation as being either authoritative or comprehensive (I am a Configurator expert, and only knowledgeable enough about Order Management to be dangerous).  It would be advisable for you to seek more detailed information/recommendations from the Order Management forum.
    Eogan

  • Copy mode of payment from customer master data to sales order,

    Hi Gurus,
    Hope all is fine.
    I have a small doubt. If we want to transfer the mode of payment from customer master data to sales order, do we have to use Exit- MV45AFZZ.
    Can't we transfer the data without the exit?

    Hi,
    I have tested this in sand box.Thought the customer master is having payment method ( payer ) ,It is not copying from customer master to sales order but if you maintain manually in sales order ,it is copying into billing document level.FYI see below snap shot.
    Note:If you want it from customer master into sales order,may be you need to take help of abaper on this.
    BR's,
    Naren

  • Avoid substitute material.., while creating sales order with BAPI?

    Hi experts.
    I use BAPI_SALESDOCU_CREATEFROMDATA1 function module to create a sales order.
    Material A has a substitute material B with substitute reason 0005.
    So if I use material A when creating sales order with above BAPI function, the order is created with material B.
    I don't want to substitute the material automatically. I want to create the sales order with material A.
    What should I do? Help me please.
    Thanks in Advance.

    Hi bvrn Reddy,
    I know, your message is almost two years old, but, did you find a solution? I'm facing the same problem. The material A has B as substitute, but in va01 a popup appears (its customizing inside the substitution reason, strategy = A). Of course, we have no popup inside the bapi, but there must be a way to decide which material the bapi should use. At the moment I only get the substitute, never the old mat (even there is something in stock).
    Maybe you've got a helpful hint for me, thanks!
    Ben

  • Cancel Billing ,Material Document(PGI),Delivery,Sales order

    hi experts,
    pls help me Cancel Billing ,Material Document(PGI),Delivery,Sales order.
    so when ever given to billing number cancel to all the document
    plz send to me code and suggestions.
    plz it is urgent.
    advanced thanking you.

    you can do that from VF02 - application menu - billing document - cancel.
    if you want to do that from program use standard bapi's to cancel BAPI_BILLINGDOC_CANCEL1... also please reffer to transaction code BAPI for more bapis to reverse pgi - or you can write a BDC to reverse pgi - tcode is vl09.
    i dont think you cancel  order but you can delete depending on your config. check out in application menu on va02. use bapi BAPI_SALESORDER_CHANGE to reject the items in sales order.

  • Material Variant configuration in sales order line item from Ztable

    Hello Experts,
    we have configurable material and and creating sales order. from sales order line item if we goto configuration we can maintain variant configurations. My requirement is that when i click on configuration after selecting a line item i need to check ztable where i have material no and and relable text. if an entry exists i have to populate this relable text in one of the configuration filed. Can any one help how can i read and update configuration in sales order level and where to do this coding so that when i click on configuration the value from ztable populated in a field.
    Many thanks in advance.

    Hi Senthil,
    It is simple.
    When you create a characteristic which should have the value maintained in the Z table, go to the tab values. Here you have a push button called "Other Value check". Here you click this button and select the function module option. Now, in the window, you will have a place where you can mention the name of teh function module.
    You create a function module with the help of your developer to find out the text maintained in the Z table using teh rules you have in your mind and update that logic in the characteristic. In the earlier screen, you just have to mention the name of the function module, thats all, your work is done.
    Now when you configure, for this characteristic, the value will be automatically determined using teh function module. You have to create such characteristics as "Not ready for input" ones in additional data for which you cannot enter values manually.
    Hope this helps.

Maybe you are looking for