Material Master extended to a wrong combination of Plant and Warehouse
I actually came through something unusual today. I was able to extend the material to extend a material to a plant and warehouse which doesnt have a link between them. I checked it out in the configuration that there was no link between the two. Then how did the material got extended to the wrong combination. The system should have put a hard stop for it.
Can anyone put a light on it.
Thanks
-Mike
What do you mean by link between material and plant?
Similar Messages
-
Wrong combination of Plant and Co code at the time of PO creation
Dear all,
At the time of creating PO when I am entering Plant and Company code system is not giving any error message if I am entering other Co code , i.e. Co code which is not assigned to the plant. I want an error message in case of maintaining wrong combination of plant and Co code.
Any suggestion ??
Reward assured for helpful answer.
Thx and regds
AmitavaGo to SPRO - MM - Purchasing - Environment Data - Define Attributes of System Messages - System Messages
Then maintain system messages 00 06 167 and then set as E (error) in category field.
Reward if useful -
IDOC: Material master (Extend Plants)
I used LSMW IDOC option to migrate material master data (MATMAS):
- Basic views
- Description
- Costing
- Plant Stock
I want to extend the plant view (Plant Stock). What change do I do to original LSMW to extend plant?
How do I specify that I am extending?
Is it that function code at the beginning of IDOC?You can do this by writing a program:
REPORT zdmmm_mm_multiplant NO STANDARD PAGE HEADING
MESSAGE-ID zdmmm
LINE-SIZE 255.
TABLE DECLARATION *
TABLES: mara, "General Material Data
mard, "Storage location data
mdma, "MRP data for material
marc. "Plant Data for Material
include zdmmmr_dev00160_mm_multi_top.
include zdmmmr_dev00160_mm_multi_f00.
AT SELECTION-SCREEN *
AT SELECTION-SCREEN.
IF NOT s_matnr[] IS INITIAL.
*Subroutine to perform the Material Number validation
PERFORM sub_validate_matnr.
ELSEIF p_ersda IS INITIAL.
MESSAGE e003 .
ENDIF.
IF NOT s_werks[] IS INITIAL.
Subroutine to perform the plant validation
PERFORM sub_validate_plant.
ENDIF.
START-OF-SELECTION
START-OF-SELECTION.
*To retrive all possible material numbers that have to be
*extended.
PERFORM sub_get_mara.
*To retrieve all possible plants to which the material needs
*to be extended.
IF s_werks IS INITIAL.
PERFORM sub_get_werks.
ENDIF.
*For retrieving Procurement status data from T134.
PERFORM sub_get_pstat.
*To determine the plants to which the Materials have
*already been extended.
PERFORM sub_get_marc.
*To determine all Storage Locations for individual Plants.
PERFORM sub_get_t001l.
*To retrieve company code
PERFORM sub_get_t001k.
*To determine the storage locations and plants to which the Material
*has already extended.
PERFORM sub_get_mard.
*To determine the MRP Areas to which the materials need to be extended.
PERFORM sub_get_mdlv.
*To determine the MRP Areas to which the materials already been extended.
PERFORM sub_get_mdma.
*To retrieve the MRP Area related data from customized table.
PERFORM sub_get_zdmmm_mrp_area.
*TO retrieve the Scalabilty info
PERFORM sub_get_scalability.
*For extending Material to Plant, all possible Storage Location and corresponding MRP Area .
PERFORM sub_mat_extn.
*For creating success and error log.
PERFORM sub_create_log.
*Text elements
001 Material/Plant Selection
002 No data found for given Selection.
003 Reference material is not maintained
004 Material is already extended to the plant
006 Material extended for MRP Area
007 Successfully extended
008 Already extended
009 Not a seviceable storage location,cannot be extended to MRP Area
*Selection texts
P_ERSDA Date
S_MATNR Material Number
S_WERKS Extend to Plant
*Messages
Message class: ZDMMM
*000 & & & &
*001 The material no. does not exist
*002 The plant does not exists.
*003 Enter either material no. or Creation date
*& Include ZDMMMR_MM_MULTI_TOP *
Types
*Type declaration to hold material no.
TYPES: BEGIN OF ty_matnr,
matnr TYPE matnr, "Material Number
mtart TYPE mtart, "Material Type
ersda TYPE ersda, "Creation date
mbrsh TYPE mbrsh, "Industry Sector
vkorg TYPE vkorg, "Sales Organization
vtweg TYPE vtweg, "Distribution Channel
mtartz TYPE zmtart, "Material Type (Customized)
END OF ty_matnr.
*Type declaration to hold plant.
TYPES: BEGIN OF ty_plant,
werks TYPE werks_d, "Plant
bwkey TYPE bwkey, "Valuation area
END OF ty_plant.
*Type declaration to hold data from marc.
TYPES: BEGIN OF ty_marc,
matnr TYPE matnr, "Material Number
werks TYPE werks_d, "Plant
bwkey TYPE bwkey,
END OF ty_marc.
*Type declaration to hold data from mard.
TYPES: BEGIN OF ty_mard,
matnr TYPE matnr, "Material Number
werks TYPE werks_d, "Plant
lgort TYPE lgort_d, "Storage Location
mtart TYPE mtart, "Material Type
END OF ty_mard.
*Type declaration to hold data from t001l.
TYPES: BEGIN OF ty_sloc,
werks TYPE werks_d, "Plant
lgort TYPE lgort_d, "Storage Location
END OF ty_sloc.
*Type declaration to hold data from mdlv.
TYPES: BEGIN OF ty_mdlv,
berid TYPE berid, "MRP Area
werzg TYPE werks_d, "Plant
ortzg TYPE lgort_d, "Storage Location
END OF ty_mdlv.
*Type declaration to hold data from custom table ZDMMM_MRP_AREA.
TYPES: BEGIN OF ty_refmdma,
zmtart TYPE zdmmm_mrp_area-zmtart, "Material Type (Customized)
zwerks TYPE zdmmm_mrp_area-zwerks, "Plant
zberid TYPE zdmmm_mrp_area-zberid, "MRP Area
zdismm TYPE zdmmm_mrp_area-zdismm, "MRP Type
zeisbe TYPE zdmmm_mrp_area-zeisbe, "Safety Stock
zdisls TYPE zdmmm_mrp_area-zdisls, "Lot Size
zdispo TYPE zdmmm_mrp_area-zdispo, "MRP Controller
zfxhor TYPE zdmmm_mrp_area-zfxhor, "Plant Delivery Time (In days)
END OF ty_refmdma.
*Type declaration to hold data for success log.
TYPES: BEGIN OF ty_succ,
mat(18) TYPE c, "Material
plant(8) TYPE c, "Plant
sloc(15) TYPE c, "Storage Location
comm(150) TYPE c, "Comments
END OF ty_succ.
*Type declaration to hold data for error log.
TYPES: BEGIN OF ty_error,
mat(18) TYPE c, "Material
plant(8) TYPE c, "Plant
sloc(15) TYPE c, "Storage Location
comm(150) TYPE c, "Comments
END OF ty_error.
*Type declaration for holding data from mvke
TYPES: BEGIN OF ty_mvke,
matnr TYPE matnr, "Material Number
vkorg TYPE vkorg, "Sales Org
vtweg TYPE vtweg, "Distribution Channel
END OF ty_mvke.
*Type declaration for holding data from qmat
TYPES: BEGIN OF ty_qmat,
matnr type matnr,
werks type werks_d,
art TYPE qmat-art,
ppl TYPE qmat-ppl,
spezueber TYPE qmat-spezueber,
conf TYPE qmat-conf,
tls TYPE qmat-tls,
app TYPE qmat-app,
mer TYPE qmat-mer,
insmk TYPE qmat-insmk,
ave TYPE qmat-ave,
stichprver TYPE qmat-stichprver,
dynregel TYPE qmat-dynregel,
sproz TYPE qmat-sproz,
hpz TYPE qmat-hpz,
dyn TYPE qmat-dyn,
mpb TYPE qmat-mpb,
mst TYPE qmat-mst,
ein TYPE qmat-ein,
mpdau TYPE qmat-mpdau,
chg TYPE qmat-chg,
qkzverf TYPE qmat-qkzverf,
qpmat TYPE qmat-qpmat,
kzprfkost TYPE qmat-kzprfkost,
aufnr_co TYPE qmat-aufnr_co,
aktiv TYPE qmat-aktiv,
apa TYPE qmat-apa,
afr TYPE qmat-afr,
mma TYPE qmat-mma,
feh TYPE qmat-feh,
prfrq TYPE qmat-prfrq,
nkmpr TYPE qmat-nkmpr,
END OF ty_qmat.
*Type declaration for MARA and MARC data for reference material
TYPES: BEGIN OF ty_ref_data,
matnr TYPE matnr, "Material Number
ladgr TYPE ladgr, "Loading Group
bklas TYPE bklas, "Valuation class
peinh TYPE peinh, "Price unit
losgr TYPE losgr, "Costing Lot Size
hkmat TYPE hkmat, "Material Origin
herkl TYPE herkl, "Country Of Origin
dismm TYPE dismm, "MRP Type
dispo TYPE dispo, "MRP Controller
fxhor TYPE fxhor, "Planned delivery time (In days)
disls TYPE disls, "Lot size
fhori TYPE fhori, "Scheduling Margin Key for Floats
magrv TYPE magrv,
vhart TYPE vhart,
ergew TYPE ergew,
ervol TYPE ervol,
fuelg TYPE fuelg,
stfak TYPE stfak,
gewto TYPE gewto,
volto TYPE volto,
prctr TYPE prctr,
kzgvh TYPE kzgvh,
stawn TYPE stawn,
mtver TYPE mtver,
casnr TYPE casnr,
gpnum TYPE gpnum,
steuc TYPE steuc,
herkr TYPE herkr,
mownr TYPE mownr,
mogru TYPE mogru,
prenc TYPE prenc,
preno TYPE preno,
prend TYPE prend,
itark TYPE itark,
bstme TYPE bstme,
vabme TYPE vabme,
nrfhg TYPE nrfhg,
mfrgr TYPE mfrgr,
ekwsl TYPE ekwsl,
webaz TYPE webaz,
insmk TYPE insmk,
kzkri TYPE kzkri,
usequ TYPE usequ,
kordb TYPE kordb,
mprof TYPE mprof,
ekgrp TYPE ekgrp,
disgr TYPE disgr,
maabc TYPE maabc,
minbe TYPE minbe,
lfrhy TYPE lfrhy,
bstmi TYPE bstmi,
bstma TYPE bstma,
bstfe TYPE bstfe,
mabst TYPE mabst,
losfx TYPE losfx,
lagpr TYPE lagpr,
ausss TYPE ausss,
takzt TYPE takzt,
rdprf TYPE rdprf,
bstrf TYPE bstrf,
megru TYPE megru,
sobsl TYPE sobsl,
kzech TYPE kzech,
lgpro TYPE lgpro,
vspvb TYPE vspvb,
rgekz TYPE rgekz,
lgfsb TYPE lgfsb,
fabkz TYPE fabkz,
eprio TYPE eprio,
schgt TYPE schgt,
plifz TYPE plifz,
mrppp TYPE mrppp,
eisbe TYPE eisbe,
lgrad TYPE lgrad,
eislo TYPE eislo,
rwpro TYPE rwpro,
shflg TYPE shflg,
shzet TYPE shzet,
shpro TYPE shpro,
periv TYPE periv,
auftl TYPE auftl,
strgr TYPE strgr,
vrmod TYPE vrmod,
vint2 TYPE vint2,
umref TYPE umref,
prgrp TYPE prgrp,
vint1 TYPE vint1,
miskz TYPE miskz,
prwrk TYPE prwrk,
mtvfp TYPE mtvfp,
wzeit TYPE wzeit,
kzpsp TYPE kzpsp,
stdpd TYPE stdpd,
perkz TYPE perkz,
altsl TYPE altsl,
kausf TYPE kausf,
sbdkz TYPE sbdkz,
kzbed TYPE kzbed,
ahdis TYPE ahdis,
kzaus TYPE kzaus,
ausdt TYPE ausdt,
nfmat TYPE nfmat,
sauft TYPE sauft,
sfepr TYPE sfepr,
mdach TYPE mdach,
dplfs TYPE dplfs,
dplpu TYPE dplpu,
dplho TYPE dplho,
tempb TYPE tempb,
raube TYPE raube,
behvo TYPE behvo,
stoff TYPE stoff,
abcin TYPE abcin,
ccfix TYPE ccfix,
wesch TYPE wesch,
etiar TYPE etiar,
etifo TYPE etifo,
xgchp TYPE xgchp,
maxlz TYPE maxlz,
lzeih TYPE lzeih,
mhdrz TYPE mhdrz,
mhdhb TYPE mhdhb,
iprkz TYPE dattp,
rdmhd TYPE rdmhd,
mhdlp TYPE mhdlp,
brgew TYPE brgew,
ntgew TYPE ntgew,
volum TYPE volum,
voleh TYPE voleh,
groes TYPE groes,
xmcng TYPE xmcng,
loggr TYPE loggr,
sernp TYPE serail,
serlv TYPE serlv,
fprfm TYPE fprfm,
ausme TYPE ausme,
qmata TYPE qmatauth,
kzdkz TYPE kzdkz,
prfrq TYPE prfrq,
rbnrm TYPE rbnr,
qmpur TYPE qmpur,
ssqss TYPE ssqss,
qzgtp TYPE qzgtyp,
qssys TYPE qssys,
bwtty TYPE bwtty,
eklas TYPE eklas,
qklas TYPE qklas,
verpr TYPE verpr,
stprs TYPE stprs,
zkprs TYPE dzkprs,
zkdat TYPE dzkdat,
bwprs TYPE bwprs,
bwprh TYPE bwprh,
bwps1 TYPE bwps1,
bwph1 TYPE bwph1,
vjbws TYPE vjbws,
vjbwh TYPE vjbwh,
abwkz TYPE abwkz,
bwpei TYPE bwpei,
xlifo TYPE xlifo,
mypol TYPE mypool,
ncost TYPE ck_no_costing,
ekalr TYPE ck_ekalrel,
hrkft TYPE hrkft,
kosgr TYPE ck_kosgr,
awsls TYPE awsls,
mmsta TYPE mmsta,
mmstd TYPE mmstd,
stlal TYPE stlal,
stlan TYPE stlan,
plnnr TYPE plnnr,
aplal TYPE plnal,
plnty TYPE plnty,
sobsk TYPE ck_sobsl,
zplpr TYPE dzplpr,
zplp1 TYPE dzplp1,
zpld1 TYPE dzpld1,
zplp2 TYPE dzplp2,
zpld2 TYPE dzpld2,
zplp3 TYPE dzplp3,
zpld3 TYPE dzpld3,
lvolg TYPE lvolg,
diskz TYPE diskz,
lsobs TYPE lsobs,
lminb TYPE lminb,
lbstf TYPE lbstf,
lgpbe TYPE lgpbe,
END OF ty_ref_data.
*Type declaration for holding data from mdma
TYPES: BEGIN OF ty_mdma,
matnr TYPE mdma-matnr, "Material Number
berid TYPE mdma-berid, "MRP Area
werks TYPE mdma-werks, "Plant
END OF ty_mdma.
*Type declaration for holding Company code data
TYPES: BEGIN OF ty_bukrs,
bwkey TYPE bwkey, "Valuation Area
bukrs TYPE bukrs, "Company code
END OF ty_bukrs.
*Type declaration for holding T001w Data
TYPES: BEGIN OF ty_t001w,
werks TYPE werks_d, "Plant
bwkey TYPE bwkey, "Valuation Area
END OF ty_t001w.
*Type declaration for holding T134 Data
TYPES: BEGIN OF ty_t134,
mtart TYPE mtart, " Material type
pstat TYPE pstat, "Condensed status display
END OF ty_t134.
Type declaration for Holding TWLAD data
TYPES: BEGIN OF ty_twlad,
werks TYPE werks_d,
lgort TYPE lgort_d,
adrnr TYPE adrnr,
END OF ty_twlad.
*Type declaration for holding ADRC data
TYPES: BEGIN OF ty_adrc,
adrnr TYPE adrnr, "Address number
sort2 TYPE ad_sort2, "Search Term
END OF ty_adrc.
TYPES: BEGIN OF ty_dev00160,
pkey TYPE zkey, "parameter key
item TYPE zitem, "Item No
value TYPE zvalue,
END OF ty_dev00160.
Constants
CONSTANTS: c_header(1) TYPE c VALUE 'H', "Header
c_true(1) TYPE c VALUE 'X', "value = x
c_v(1) TYPE c VALUE 'V', "Sales View
c_e(1) TYPE c VALUE 'E', "Purchasing View
c_d(1) TYPE c VALUE 'D', "MRP View
c_p(1) TYPE c VALUE 'P', "Forecasting View
c_a(1) TYPE c VALUE 'A', "Work Scheduling view
c_l(1) TYPE c VALUE 'L', "Storage View
c_q(1) TYPE c VALUE 'Q', "Quality View
c_b(1) TYPE c VALUE 'B', "Accounting
c_g(1) TYPE c VALUE 'G', "Costing View
c_f(1) TYPE c VALUE 'F', "PRT View
c_k(1) TYPE c VALUE 'K'. "Basic View
Internal tables
*Internal table to hold material no and material type
DATA: i_matnr TYPE STANDARD TABLE OF ty_matnr INITIAL SIZE 0.
*Internal table to hold plant
DATA: i_plant TYPE STANDARD TABLE OF ty_plant INITIAL SIZE 0.
*Internal table to hold marc data
DATA: i_marc TYPE STANDARD TABLE OF ty_marc INITIAL SIZE 0.
*Internal table to hold marc data
DATA: i_tmarc TYPE STANDARD TABLE OF ty_marc INITIAL SIZE 0.
*Internal table to hold mard data
DATA: i_mard TYPE STANDARD TABLE OF ty_mard INITIAL SIZE 0.
*Internal table to hold t001l data
DATA: i_sloc TYPE STANDARD TABLE OF ty_sloc INITIAL SIZE 0.
*Internal table to hold MRP Area
DATA: i_mdlv TYPE STANDARD TABLE OF ty_mdlv INITIAL SIZE 0.
*Internal table to hold already extended MRP Area
DATA: i_mdma TYPE STANDARD TABLE OF ty_mdma INITIAL SIZE 0.
*Internal table to hold MRP Area data from customized table
DATA: i_refmdma TYPE STANDARD TABLE OF ty_refmdma INITIAL SIZE 0.
*Internal table to hold success messages
DATA: i_succ TYPE STANDARD TABLE OF ty_succ INITIAL SIZE 0.
*Internal table to hold error messages
DATA: i_error TYPE STANDARD TABLE OF ty_error INITIAL SIZE 0.
*Internal table to hold mvke data
DATA: i_mvke TYPE STANDARD TABLE OF ty_mvke INITIAL SIZE 0.
*Internal table for company code data
DATA: i_bukrs TYPE STANDARD TABLE OF ty_bukrs INITIAL SIZE 0.
*Internal table for T001W data
DATA: i_t001w TYPE STANDARD TABLE OF ty_t001w INITIAL SIZE 0.
*Internal table for T134 data
DATA: i_t134 TYPE STANDARD TABLE OF ty_t134 INITIAL SIZE 0.
*Internal table for TWLAD data
DATA: i_twlad TYPE STANDARD TABLE OF ty_twlad INITIAL SIZE 0.
*Internal table for ADRC data
DATA: i_adrc TYPE STANDARD TABLE OF ty_adrc INITIAL SIZE 0.
*Internal table for dev00160 data
DATA: i_dev00160 TYPE STANDARD TABLE OF ty_dev00160 INITIAL SIZE 0.
*Internal table for qmat data
DATA: i_qmat TYPE STANDARD TABLE OF ty_qmat INITIAL SIZE 0.
Work areas
*Work Area for Internal table i_mara
DATA: wa_matnr TYPE ty_matnr.
*Work Area for Internal table i_werks
DATA: wa_plant TYPE ty_plant.
*Work Area for Internal table i_marc
DATA: wa_marc TYPE ty_marc.
*Work Area for Internal table i_t001l
DATA: wa_sloc TYPE ty_sloc.
*Work Area for Internal table i_mdlv
DATA: wa_mdlv TYPE ty_mdlv.
*Work Area for Internal table i_bukrs
DATA: wa_bukrs TYPE ty_bukrs.
*Work Area for Internal table i_refmdma.
DATA: wa_refmdma TYPE ty_refmdma.
*Work Area for Internal table i_succ
DATA: wa_succ TYPE ty_succ.
*Work Area for Internal table i_error
DATA: wa_error TYPE ty_error.
*Work Area for Internal table i_selfields
DATA: wa_selfields TYPE sdibe_massfields.
*Work Area for Internal table i_mvke
DATA: wa_mvke TYPE ty_mvke.
*Work Area for Internal table i_ref_data
DATA: wa_ref_data TYPE ty_ref_data.
*Work Area for internal table I_t001w
DATA: wa_t001w TYPE ty_t001w.
*Work Area for internal table I_t001w
DATA: wa_twlad TYPE ty_twlad.
*Work Area for internal table I_t134
DATA: wa_t134 TYPE ty_t134.
WOrk Area for ADRC Table
DATA: wa_adrc TYPE ty_adrc.
WOrk Area for MARD Table
DATA: wa_mard TYPE ty_mard.
*Work Area for Internal table i_mvke
DATA: wa_dev00160 TYPE ty_dev00160.
*Work Area for Internal table i_mvke
DATA: wa_qmat TYPE ty_qmat.
SELECTION SCREEN *
SELECTION-SCREEN : BEGIN OF BLOCK b_001
WITH FRAME
TITLE text-001 . "Start of selection-screen
SELECT-OPTIONS: s_matnr FOR mara-matnr. "Material Number
PARAMETERS : p_ersda LIKE mara-ersda. "Creation Data
SELECT-OPTIONS: s_werks FOR marc-werks NO INTERVALS. "Plant
SELECTION-SCREEN : END OF BLOCK b_001 . "End of Selection-screen
*& Include ZDMMMR_MM_MULTI_F00 *
*& Form sub_validate_matnr
Subroutine for validating material number
FORM sub_validate_matnr .
SELECT matnr "Material Number
mtart "Material Type
ersda "Creation date
mbrsh "Industry Sector
FROM mara "Table for General Material Data
INTO TABLE i_matnr
WHERE matnr IN s_matnr.
*If no material is found an error message is given
IF sy-subrc <> 0.
MESSAGE e001.
ENDIF.
ENDFORM. " sub_validate_matnr
*& Form sub_validate_plant
Subroutine to validate Plant
FORM sub_validate_plant .
SELECT werks "Plant
bwkey "Valuation area
FROM t001w "Table for Plants/Branches
INTO TABLE i_plant
WHERE werks IN s_werks.
*If no plant is found an error message is given
IF sy-subrc NE 0.
MESSAGE e002.
ENDIF.
ENDFORM. " sub_validate_plant
*& Form sub_get_mara
*Determine all the materials that need to be extended to new plants,
*storage locations and MRP areas
FORM sub_get_mara .
IF NOT s_matnr[] IS INITIAL.
SORT i_matnr BY matnr.
IF p_ersda IS NOT INITIAL.
DELETE i_matnr WHERE ersda NE p_ersda.
ENDIF.
ELSE.
*If only Creation Date is given
SELECT matnr "Material No.
mtart "Material Type
ersda "Creation date
mbrsh "Industry Sector
FROM mara "Table for General Material Data
INTO TABLE i_matnr
WHERE ersda EQ p_ersda.
IF sy-subrc EQ 0.
SORT i_matnr BY matnr.
ELSE.
MESSAGE i000 WITH 'No data found for given Selection.'(002).
LEAVE LIST-PROCESSING.
ENDIF.
ENDIF.
Subroutine to get data from mvke.
PERFORM sub_get_mvke.
LOOP AT i_matnr INTO wa_matnr.
CLEAR wa_mvke.
READ TABLE i_mvke INTO wa_mvke WITH KEY matnr = wa_matnr-matnr
BINARY SEARCH.
IF sy-subrc EQ 0.
wa_matnr-vkorg = wa_mvke-vkorg.
wa_matnr-vtweg = wa_mvke-vtweg.
ENDIF.
IF wa_matnr-mtart = 'AD01'.
wa_matnr-mtartz = 'AD01'.
ELSE.
wa_matnr-mtartz = 'NAD01'.
ENDIF.
MODIFY i_matnr FROM wa_matnr TRANSPORTING vkorg vtweg mtartz.
ENDLOOP.
ENDFORM. " sub_get_mara
*& Form sub_get_werks
*Determine all the plants to which the Materials need to be extended
FORM sub_get_werks .
SELECT werks "Plant
bwkey "Valuation Area
FROM t001w "Check table for Plants/Branches
INTO TABLE i_plant.
IF sy-subrc EQ 0.
SORT i_plant BY werks.
ENDIF.
ENDFORM. " sub_get_werks
*& Form sub_get_marc
*Determine the status of the materials with respect to which plants
*they have already been extended to
FORM sub_get_marc .
CHECK i_matnr[] IS NOT INITIAL.
SELECT m~matnr "Material Number
m~werks "Plant
t~bwkey
INTO TABLE i_marc
FROM marc AS m "Table for Plant Data for Material
INNER JOIN t001w AS t
ON mwerks = twerks
FOR ALL ENTRIES IN i_matnr
WHERE matnr EQ i_matnr-matnr.
IF sy-subrc EQ 0.
*Append the plants that have been extended to
to the list of plants to which they have to be extended
only when no plants are given in the selection screen
IF s_werks IS INITIAL.
LOOP AT i_marc INTO wa_marc.
wa_plant-werks = wa_marc-werks.
wa_plant-bwkey = wa_marc-bwkey.
APPEND wa_plant TO i_plant.
CLEAR wa_plant.
ENDLOOP.
SORT i_plant BY werks bwkey.
DELETE ADJACENT DUPLICATES FROM i_plant
COMPARING werks bwkey.
ENDIF.
SORT i_marc BY matnr werks.
*Retrieve the Valutaion Area for the plants to which the material
*has already been extended.
SELECT werks "Plant
bwkey "Valuation area
INTO TABLE i_t001w
FROM t001w "Table for Plants/Branches
FOR ALL ENTRIES IN i_marc
WHERE werks = i_marc-werks.
*If selection succeed.
IF sy-subrc EQ 0.
Sort by Plant
SORT i_t001w BY werks.
ENDIF.
ENDIF.
*Copy the content of MARC into a temporary internal table
i_tmarc[] = i_marc[].
DELETE ADJACENT DUPLICATES FROM i_tmarc
COMPARING matnr.
*Retrieving Inspection type - material parameters (QMAT)
*data
SELECT matnr "Material Number
werks "Plant
art "Inspection Type
ppl "Inspection with Task List
spezueber "Inspect with Material Specification
conf "Inspection Specifications from
" Configuration
tls "Inspection Specifications from Batch
" Determination
app "Automatic Specification Assignment
mer "nspect by Characteristics
insmk "Post to Inspection Stock
ave "Automatic Usage Decision Planned
stichprver "Sampling Procedure
dynregel "Dynamic Modification Rule
sproz "Inspection Percentage
hpz "100% Inspection
dyn "Skips Allowed
mpb "Enter the Sample Manually
mst "Trigger Sample Calculation Manually
ein "Serial Number Management Possible
mpdau "Average Inspection Duration
chg "Control of Inspection Lot Creation (Lot
"Summary)
qkzverf "Procedure for Calculating Quality Score
qpmat "Allowed Share of Scrap (Percent) in
"Inspection Lot
kzprfkost "Record Appraisal Costs in Individual QM
"Order
aufnr_co "Order Number for Recording Appraisal
"Costs
aktiv "Inspection Type - Material Combination is
"Active
apa "Preferred Inspection Type
afr "Inspection for Handling Unit
mma "Field Not Used as of 3.0 Field
"Reserved for SAP
feh "Field Not Used as of 3.0 Field
"Reserved for SAP
prfrq "Field Not Used as of 3.0 Field
"Reserved for SAP
nkmpr "Field Not Used as of 3.0 Field
"Reserved for SAP
INTO TABLE i_qmat
FROM qmat "Table of "Inspection type - material
"parameters"
FOR ALL ENTRIES IN i_tmarc
WHERE matnr = i_tmarc-matnr "Material no. of temporary internal
"table
AND werks = i_tmarc-werks. "Plant of temporary internal table
*If selection succeed
IF sy-subrc EQ 0.
SORT i_qmat BY matnr.
ENDIF.
ENDFORM. " sub_get_marc
*& Form sub_get_mard
Determine the storage locations for the Plants i_plant.
FORM sub_get_mard .
CHECK i_marc[] IS NOT INITIAL.
SELECT matnr "Material Number
werks "Plant
lgort "Storage Location
FROM mard "Table for Storage Location Data for Material
INTO TABLE i_mard
FOR ALL ENTRIES IN i_marc
WHERE matnr EQ i_marc-matnr
AND werks EQ i_marc-werks.
*If selection succeed
IF sy-subrc EQ 0.
*Sort internal table by Material no , Plant and Storage Location
SORT i_mard BY matnr werks lgort .
ENDIF.
ENDFORM. " sub_get_mard
*& Form sub_get_t001l
Determine the storage locations for the Plants i_plant.
FORM sub_get_t001l .
CHECK i_plant[] IS NOT INITIAL.
SELECT werks "Plant
lgort "Storage Location
FROM t001l "Check table for Storage Location
INTO TABLE i_sloc
FOR ALL ENTRIES IN i_plant
WHERE werks EQ i_plant-werks.
*If selection succeed
IF sy-subrc EQ 0.
*Sort by Plant and Storage Location
SORT i_sloc BY werks lgort.
For all the storage location get the Storage Location Address
*Number
SELECT werks "Plant
lgort "Storage Location
adrnr "Address Number
FROM twlad "Table of 'Determination of Address from Plant and
"Storage Location'
INTO TABLE i_twlad
FOR ALL ENTRIES IN i_sloc
WHERE werks = i_sloc-werks
AND lgort = i_sloc-lgort.
*If selection succeed
IF sy-subrc EQ 0.
*Sort by Plant, Storage Location and Address number
SORT i_twlad BY werks lgort adrnr.
For all address numbers retrieved get the search term
SELECT addrnumber "Address number
sort2 "Search Term 2
INTO TABLE i_adrc
FROM adrc "Table of 'Addresses (Business Address
"Services)'
FOR ALL ENTRIES IN i_twlad
WHERE addrnumber = i_twlad-adrnr.
IF sy-subrc EQ 0.
SORT i_adrc BY adrnr.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. " sub_get_t001l
*& Form sub_get_mdlv
Determine the MRP Areas to which the materials need to be extended.
FORM sub_get_mdlv .
CHECK i_sloc[] IS NOT INITIAL.
SELECT berid "MRP Area
werzg "Plant
ortzg "Receiving Storage Location
FROM mdlv "Table for Customizing MRP Area
INTO TABLE i_mdlv
FOR ALL ENTRIES IN i_sloc
WHERE werzg EQ i_sloc-werks
AND ortzg EQ i_sloc-lgort.
*If selection succeed.
IF sy-subrc EQ 0.
*Sort by Plant and Storage Location
SORT i_mard BY werks lgort.
ENDIF.
ENDFORM. " sub_get_mdlv
*& Form sub_get_zdmmm_mrp_area
Determine required fields w.r.t Plant and MRP Area from customized
*table
FORM sub_get_zdmmm_mrp_area .
CHECK i_mdlv[] IS NOT INITIAL.
*Retrieving MRP data from Customized table
SELECT zmtart "Material Type
zwerks "Plant
zberid "MRP Area
zdismm "MRP Type
zeisbe "Safety Stock
zdisls "Lot Size
zdispo "Mrp Controller
zfxhor "Planned Delivery Time (In Days)
FROM zdmmm_mrp_area "Customized table for MRP Area wrt
"plant and mat type.
INTO TABLE i_refmdma
FOR ALL ENTRIES IN i_mdlv
WHERE zberid = i_mdlv-berid
AND zwerks = i_mdlv-werzg.
*If selection succeed
IF sy-subrc <> 0.
*Sort by MRP Area and Plant
SORT i_refmdma BY zberid zwerks.
ENDIF.
ENDFORM. " sub_get_zdmmm_mrp_area
*& Form sub_mat_extn
For extending Material to Plant, all possible Storage Location and
corresponding MRP Area .
FORM sub_mat_extn .
*Local variable declaration
DATA: l_index TYPE sytabix. "For storing sy-tabix
DATA: l_counter TYPE i VALUE 0. "For formatting Error log.
DATA: l_sloc_extend TYPE c. "Flag for Extending the material
DATA: wa_dpop LIKE dpop. "For sending as a exporting
"parameter
DATA: wa_mdma LIKE mdma. "For sending as a exporting
"parameter
DATA: l_stat TYPE c. "For checking the Storage Location
"is Seviceable or not.
DATA: wa_bapireturn1 TYPE bapiret1. "Return Work area of
"'MD_MRP_LEVEL_CREATE_DATA'
*No material is selected.
CHECK i_matnr[] IS NOT INITIAL.
SORT i_plant BY werks.
SORT i_marc BY matnr werks.
SORT i_mard BY matnr werks lgort.
*For extending the material to Plant Storage Location and possible MRP
*Area
LOOP AT i_matnr INTO wa_matnr.
CLEAR wa_marc.
Checking whether Reference Material Exists or not
READ TABLE i_marc INTO wa_marc WITH KEY matnr = wa_matnr-matnr
BINARY SEARCH.
If no reference material exists..populate data for error log.
IF sy-subrc NE 0.
CLEAR wa_error.
PERFORM material_convert USING wa_matnr-matnr
CHANGING wa_error-mat.
wa_error-comm = 'Reference material is not maintained'(003).
APPEND wa_error TO i_error.
CLEAR wa_error.
CONTINUE.
ENDIF.
For retrieving the reference data
PERFORM sub_retrieve_refdata.
LOOP AT i_plant INTO wa_plant.
READ TABLE i_marc INTO wa_marc WITH KEY matnr = wa_matnr-matnr
werks = wa_plant-werks
BINARY SEARCH.
IF sy-subrc EQ 0.
-
Material master extending to sales organization , distribution chanel ..
Hi All,
I have done the plant to plant Material master extending
my query is similar way how to approach the material master extending to sales organization , distribution chanel and storage location.
earlier in the plant to plant i have taken the selection screens
parameters : source plant
select option : target plant
materials i have taken is : material type and related but i didn't take any sales org, division and storage.
Regards...HI,
you can do this through MM01 bdc select sales views and end you data.(for extanding views not in mm02, mm01 only)
i hope it will slove your problem else please replay with quary.
Do Reward points..if found helpful -
When trying to connect to a projector, I pressed the wrong combination of keys and now I have voice commands and a border around all typing fields on my powerbook. How can I get out of this mode?
System Preferences, Universal Access, Seeing, VoiceOver.
-
Material master extend automatically
hi,
mostly all the material master will be extend for two plants. how can i do it automatically
pls advice. thankscall function BAPI_MATERIAL_SAVEDATA with different plants.
example
loop Materials
loop Plant
pass value to headerdata & plantdata
call function BAPI_MATERIAL_SAVEDATA
endloop .
endloop. -
Assign material master to many profit center in a plant
hi experts!
Now, i have a trouble.
i am defining Profit center base of sale department. and one product can be sold by different sale depart.
Example, Product A (belong to Plant 1) can be sold by either profit center M or Profit center N.
So now, how to derivate accurate profit center SD posting.
Please, help me.
Thanks in advance.Hi,
At time of sales order the profit center can be set by
1. CO account assignment (strongest option)
2. Manual entry
3. PCA substitution
4. Material / plant (weakest option)
regards
Waman -
Storage Location required entry in Material Master
Hi
My client requirement is, at the time of creation of Material Master, System will ask for Storage Location.Without Storage Location, Icann't create Material Master.
Even if I'll select Plant and Storage LOcation View & Warehouse View, System is not asking the storage Location.
Can anybody suggest me where I'll set the setting so that system will ask for Storage Location mandatory in Material Master.
Thanks & regards
PKBHi Raja,
Thanks for your reply.Before Posting the thread, I've already checked these Views what you told.But system is not asking me to enter storage location.
You can check in your system.
System only asking for plant not storage location.Even if we select warehouse view, system is not asking for Storage Location view.
Thanks & Regards
PKB -
Sir,
at which level,material master is defined? Can we maintain same material with two different names in two company codes of the same client?Shailesh,
You can create the same material with different name....
Please tryt o simulate it using the Tcode MM01 and give the material say : ballpen in the copy from material tab abd select all the views and the give the organizational details like to which plant you want to maintain anf from which plant/sto.loc you want to copy the material.
Further the concept of company code is not considered for material master, as it is maintained at Client,plant and st.loc levels.
BR,
Krishna -
Extending material master for different sales org/plant combination
hi ,
1 ) a material can be sold from one plant by many sales organisations. so we map this scenario in enterprise structure by the config step "assign sales org--dist channel--
plant ". (let's say sales org A and B selling from plant 1 and also sales org A selling from plant 2)
when we have defined the above config step, then why we need to have material master extended for different combination of sales org and plant as in stpe 1 ?. we can just create one material master with one plant and sales org combination and based on config as in step one, we can sell material from any sales org from a plant ?
2) we can extend material master for any combination of sales org/plant .....is it also possible to extend material master to different storage locations !
regds
pamela
Edited by: Pamela79 on Feb 15, 2011 11:02 AMThere are several reasons why you should extend the materails to different sales organizations and plants.
a. The materials are normally valuated at the plant level. So, you can have different valuations at different plants.
b. You can have different quantity stored in different plants. How do you know which plant has what quantity.
c. You can have materail not to be sold from one plant, but you can have the same materail sold from the other, how do you block it? at the plant and materail combination, you can do it.
d. For different sales organizations, you may want the cost and the price to be posted to different GL accounts. You can control it at sales org level of the materail.
e. You may just want the material to be purchased but not sold, then you may not even create a sales org view for the material. But say, in future you will like to only purchase a materail from a plant and consume it for some other purpose but not sales (which u did previously), then you can block it at sales org and dbr level.
So, these are a few reasons. But there could be many. You can have a look at the fields in the material master at sales org level and plant level and you can find it for yourself howmany parameters are there to control...
Hope this helps...
Regards,
Mukund S -
Extend material master in other plants
Hi there,
I have 5 plants, one of them (e.g. Plant P001) is the main distributor for supplying all the materials for the rest. I´m using valuation at plant level.
When I create a new material, I do it initially in the main plant and I have to extend it to the rest of the plants.
My doubt is, there is a way to extend the material to other plants automatically including the sales views?
I would like to minimize the possibilities of errors for manual entry, for example, enter the average cost of the material, which have to be the same for all plants.
Thanks in advance,
Mairo.Hi
Please find below web links for information and procedure for Legacy system migration workbench
link:[http://www.sap-img.com/sap-data-migration.htm]
link:[http://www.sap-basis-abap.com/sapgeneral/step-by-step-legacy-system-migration-workbench-lsmw.htm]
link:[http://www.sapdb.info/wp-content/uploads/2008/08/lsmw.pdf]
Hope this help
Regards
Vikrant -
I want validation while creating material master with profit center
Dear Experts,
I want validation while creating material master with profit center.
If 0001 plant having 100100 profit center
0002 plant having 200200 profit center
Material A cant be created for 0001 plant for with wrong profit center 200200.
Kindly help & provide me solution clearlyHi,
Profit centers are assigned to controlling areas. And controlling areas can have many plants under them. So as long as both the plants and profit centers are in the same controlling area users will be able to extend the materials.
You should put in your validation control in the material master user exit. One of the exits you can use is
MGA00001 Material Master (Industry): Checks and Enhancements
Thanks & regards
Hameed Parvez -
Valuation class of material master to be changed
Hello,
My master data team has insereted a wrong valuation class in the material master record. Purchase order has been raised and a GR has been done for the same. SAP gives following steps to change the valuation class:
The valuation class cannot be changed, choose 'Display error'
Message no. M3368
"Diagnosis
You wanted to change the valuation class. However, this is not possible because one or more of the following already exist for the material:
Valuated stocks in the current period or in the previous period
Open purchase orders or delivery schedule lines
Production orders for which a goods movement has already taken place
System response
Your change is reset by the system.
Procedure
If valuated stocks already exist, you can change the valuation class only as follows:
a) Post the stocks of the material to an interim account.
b) Change the valuation class in the material master record.
c) Post the stocks of the material back to their original account.
If open purchase orders already exist, you can only change the valuation class if you first flag the corresponding purchase order items for deletion.
If production orders exist for which a goods movement has already taken place, you can only change the valuation class if you first set the status of the production orders to Deleted."
My question is how do I post the stocks to an interim account since stock accounts are configured to post automatically?
If anyone knows how to manage the posting, please let me know.
Thanks
KeyurHi,
Make the movement with a movement type in MIGO that posts to the same account in FI for all Valuation classes.
After changing the Val. CLass then reverse the above movement.
Kind regards -
How to modify industry sector of material master data
dear all:
i have already created a material master data using a wrong industry sector through tcode MM01.
and i have created BOM&ROUTTING for this material.
now ,i want to modify the industry sector of this material.
what should i do for this case?
thank you!
best regards!Hi,
Industry sector is at client level & once you create the material you can't change the industry sector.
However, if you have debug rights then you can change it directly in the table MARA with field MBRSH.
Hope your query get resolved.
Thanx -
Material Master - Sub Classification
Hi Friends
My client has a problem in inventory matching. To avoid this, business wants some of their steel Materials to be sub classified according to the batch/Coil No.
Suppose we have a material with material no. X ( Specifications HA3PO 200 X 6). This material is supplied by a vendor under different Batch/ Foil NO.
These batch / Foil NO. are defined as per the length and width of the coil. Now the business wants to include the batch/Foil No. as sub category of the material.
They are at present marinating the info in an excel sheet and they are facing problem in matching inventory to the SAP system. To get rid of this they need a solution.
How do we map this and where should we do? I'm not a MM conslt, but need to help the business quickly.
Your help will be highly appreciated.
ThanksHi,
It is suggested to use concept of Split Valuation for this so that you will get proper tracking of Quantity as well as value of stock.
I will explain this with an example, For e.g. valuation criteria is SUBCLASS
Go to OMWC - Configure Split Valuation
Here Create Valuation Category as for e.g. "SUBCLASS" and Valuation Types as "FOIL NO 1" and "FOIL NO 2"
Here in Valuation types, you can assign the Account Category Reference
And in OMSK - You can define 2 Valuation classes and assign these to 2 Account Category References
Now in OBYC - Maintain Account Determination for Account Key BSX as per the valuation class
Refer following link for detailed configuration of Split Valuation
[Split Valuation Process|http://www.sap123.com/showthread.php?t=29]
[Split Valuation Help|http://help.sap.com/saphelp_erp60_sp/helpdata/en/8f/d1de34e4cb2300e10000009b38f83b/frameset.htm]
Process Flow: -
1. Create Material Master for Asset in MM01, maintain valuation category ORIGIN in "Accounting 1" view and extend the material master for all the above 2 valuation types and input the value.
Here in your case Valuation Types will be "FOIL NO 1" and "FOIL NO 2" and also assign the respective valuation classes.
When you want to Purchase materials then,
1. ME21N - Create for Material with valuation type "FOIL NO 1" or "FOIL NO 2" as per requirement, maintain it in "Delivery" Tab
2. MIGO - GR w.r.t. PO (GR of material will be done in valuation type as per maintained in PO "FOIL NO 1" and "FOIL NO 2"
3. MMBE - Stock Overview (Here you can see the stock as per valuation type "FOIL NO 1" and "FOIL NO 2"
Maybe you are looking for
-
BUS2012 releaser RELEASE - BAPI_PO_RELEASE, saving releaser
Hi all, I know, this kind of topic was already processed a couple of times, however I did not find a suitable solution for our problem. Customer wants to be able to save (and report later) releasers of the PO. There is a new processed being implement
-
Most of the songs in my iTunes library has been tagged with the exclamation point and will not allow me to place those songs on a new Nano iPod I bought...why? This is music I have purchased in the past.
-
Three (3) Pages are: 1) Page showing only the name and the remainder of the page blank; 2) Page with only the most recent posts (last post on page cut off); 3) Page with nothing on it. Mozilla Firefox is my preferred and primary browser, however, I w
-
I film in 16:9 - have all of my settings set for it within Final Cut (Anamorphic) however when I burn my discs the films fit television screens and in some cases they look stretched as though it is letterbox... I am not seeing the black bars at the t
-
R3load -testconnect fails while doing the Export Prepare
Hi All, R3load -testconnect fails while doing the Export Prepare for the Unicode Conversion. I have upgraded the CRM system from CRM 4.0 to SAP Netweaver 7.0 with EHP1. Now I doing the Unicode Conversion. While using the sapinst as root to start the