Material master - Field details- application- configuration details - reg

Dear ,
Is there any single document for , Usage of each field in Material master, application with examples,& how to do the IMG setting for Material master.
Regards,
Suresh

Hi Suresh,
There is no such document exists.
We have to go thro each field and thro help only we can understand.
For your information all the fields in matl master are never used by one industry.So even in matl master u can see lot of fields not appearing
Thanks
A.Gururajan
Emergys Corp

Similar Messages

Reg.Material master field active & deactive setting

Dear All
How to set the material master fields as "Optional","Requirement" and "Hide". What is the tcode?
Please advise step by step.
Thanks
Rajj

first copy the screen field of mateiral master to get this press F1 on the the field adn from technical tas copy the the screen field (e.g MRP group MARC-DISGR) then go to OMSR transaction and hit field name and enter the value you have copy from mateiral
once you see that field on the screen then hit the Green yellow arrow from right side of screen whic will take the screen where oyu can make optiona, reqd or hide field.
but make sure here you make setting at appropriate field ref other wise it will impact many transaciton
e.g. if oyu want to make field optional in MM02 then don;t make field optional at ROH

Mass changes of Material Master field with different values

Hi,
How to change a field in Material Master for more than thousand materials. I think MM17 can only be used for mass changes of materials with same values. I need to upload different values for different materials. Is there any other way to do this.
Thanks,
K R Vishnu Kumar

Hi Kumar.
I think you have to use LSMW for mass updation for Material Master fields with different values.
Regards,
Rahul.

Material master fields on plant level

Hi all,
is it possible that i can restrict fields on plant level, like one material type one field i want mand. in one plant and optional in other plant.
regards,
qsm sap

hi,
Yes, it posible:
go to SPRO
Logistics - General-> Material Master->Field Selection->Define Plant-Specific Field Selection and Plant-Specific Screen Selection (OMSA)
see the settings for the plant in field reference - you need a diferent reference to the diferent plants (group together similar plants - all the ones that you want the field to be mandetory should have the same field reference)
now go to OMS9 or OMSR
and set the field as mandetory for the field reference you have made in OMSA
good luck
shachar

Material master Fields Mandatory

Hi Guys,
i want to make some field mandatory, in Sales Org view of material master, Please help me where i have to go in SPRO for such setting
Regards,
Ashish

Hi Ashish,
First go to the respective field for which it has to be made mandatory. Note down the Table name and field name.
Go to SPRO--> Logistics General --> Material Master --> Field Selection --> Assign Fields to Field Selection Groups.
click the position field name button and enter the table name - field name (eg MARA-TRAGR for Transportation Group). Note down the Selection Group. Then go to
SPRO--> Logistics General --> Material Master --> Field Selection --> Maintain Field Selection for Data Screens
Kindly mention the field selection group that has been noted earlier and press enter.
Then in the middle Field Selection (Field Selection Group 1) can be seen select the field reference of the material type or MM01 for Create Material Master or MM02 for Change Material master as hide, display, reqd entry and Opt. entry.
Hope it will be useful, if so mention.
Regards,
Elanchezhian. K.C.

Locking and locking material master fields

Hi Experts
I have a scenario where we need to lock material master field to be locked once data is maintained in the field so that its not editable for the users to change by the users, later the change should be possible for the field through an interface.
Any inputs on how to achieve this.
Thanks
Vickey

Im not sure how to get a direct solution for your scenario, but maybe you can use Authorization group to control who can access to this material instead?
Just a thought.

Material master - classification details

Hello,
we have material master with classification view- active
now i wanted to down load all the materials - classification details (value maintained for the characteristics in classification view)..
is there any table from which i can down load the same>?

CABN                           Characteristic
CABN_EXCL                      Characteristics That Are Excluded for Type Matching
CABNNEW                        Characteristic
CABNT                          Characteristic Descriptions
CAWN                           Characteristic values
KSML                           Characteristics of a Class
LCABN                          Characteristic
LCABNT                         Characteristic descriptions
LKSML                          Characteristics of a Class
AUSP - Char Values
Regards,
Ashok

Material Master Field Change

Hi Experts
I have a Field in MRP2 View MARC -> Field LGPRO (Issue Storage Location).
I am using MRP2 view, only for this field.
1) Is it possible I can move this Field to Plant/Storage location view ??
2) How to restrict this setting only for particular material types.
Regard

You need to move the entire sub screen. If you go to SPRO->logistics General> material master>configuring material master--> define structure of data screens for each screen sequence. Say select 21 that is std ind ( short) tab pages and make a copy of that say Z1. In that if you go to MRP2 view the sub screen containing storagelocation field is with screen number 2484.
Now if you go to Plant storage data view 1 and select dialog structure subscreens; here the screen with 0001 can be changed to 2484. However since this is related to MRP view the maintainance status needs to be changed to D from L else you will not be able to see the fields. But if you change the status to D the orginal sub screens of Plant data/storage1 will not appear.
You will have to check that these subscreens can be moved to Gen plant data/storage2.
Finally you need to assing this Z1 under same node but assign screen sequences to user/material type/transaction/industry sector under that
SREf Trans Sref user Sref Matl type Sref : industry Ssq
01 * relevant material type * z1 ( the one which was created as above)
However material master being very critical it is advised not to make such changes and if any changes are made it has to be thoroughly tested for the impact.
Regards
Sangeeta

Material Master Field Restriction

Hi Team!
is it possible to restrict the setup of some specific field for an specific view in Material master, and let the rest of the field to be updated for the normal users that used to?
the views that I'm talking about are the MRP1 & MRP2 at the material master, the idea is that no one can modify certain fields that belongs to them,
could it be possible, pls let me know.
regarDs!!

Hi
You cannot restrict the material master feilds based on the user, because the feilds in the material master are not user specific.
It is based on the material type and also you can modify based on plant specific and industry specific.
May be you wont give certain users for authorization for MM02 transaction ,for that you cantact the SAP security guys in your
team,
If you want no one can change the MRP veiws you can do in the configuration settings,T,code OMSR the table name is MARC and based on the feild name you select the Display only, so no one can change the values.
Thanks

Material Master - Field in MM to enter NDC (National Drug Code) or similar

Hallo Experts,
Is there somewhere in the material master where one can enter codes for identification such as NDC - National Drug Code?
The reason I asked this is because it is a custom requirement for some goods that are considered drugs which we trade with other companies across the border (Mostly US). This information (Coming from a field in the MM) needs to be EDI'd and hence I am in search of a field in the MM that could house this code. Its Kind of like the Harzadous material number but in our case WM is not implement. Is there a possibility?
Will appreciate your response,
Thanks,
LN.

Hallo Experts,
Is there somewhere in the material master where one can enter codes for identification such as NDC - National Drug Code?
The reason I asked this is because it is a custom requirement for some goods that are considered drugs which we trade with other companies across the border (Mostly US). This information (Coming from a field in the MM) needs to be EDI'd and hence I am in search of a field in the MM that could house this code. Its Kind of like the Harzadous material number but in our case WM is not implemented. Is there a possibility?
Will appreciate your response,
Thanks,
LN.

Inventory management: posting block : material master field

Hi,
In het material master you have a field Physical Inventory Blocking Indicator, but when I create a counting document (MI01) with posting block. The field in the material master is still blank. How can this happen?
Best regards,
Eric.

Hi Eric,
I guess there is some inconsistency in your system,
Please refer to the SAP Note 355939 & 192571 and you might be able to fix the bug..
Note 355939
Summary
Symptom
This note is only of importance for you if you execute physical inventory functions using the R/3 System. The inconsistencies can usually be adequately eliminated using Note 192571. This note is only intended for customers who did not discover the inconsistency in the first period of the new fiscal year and who now have problems with the physical inventory indicators.
Additional key words
RMMMPERI, MMPV, physical inventory, PIINKON, MARD-KZILL, MARD-SPERR
Cause and prerequisites
See Note 192571.
Solution
To eliminate the inconsistencies, carry out the following steps in the corresponding sequence:
1. Implement the corrections from Note 192571
2. Also implement the attached correction instructions
3. Start program ZREPPI_FLAGS (from Note 192571)
4. Start program ZINVUT30 (from Note 67072)
Source code corrections
Note 192571
Summary
Symptom
Preliminary note:
This note only applies to you if you execute physical inventory functions in the R/3 System.
In the log of the period closing program running during the fiscal year change, the number of the records closed does not correspond to the actual number of records in the corresponding stock table on the database.
As a result, the physical inventory indicators were not moved from the current fiscal year to the previous year in the records that are not closed. This means that materials, for which a physical inventory was carried out in the previous year, are dealt with by the system as if a physical inventory has already been carried out in the current year.
This problem can affect materials created before the upgrade to Release 4.5.
Additional key words
RMMMPERI, MMPV, inventory, PIINKON, MARD-KZILL, MARD-SPERR
Cause and prerequisites
The problem is caused by a program error.
Solution
If you have not yet carried out the fiscal year change (for example, if you have a fiscal year variant with non-calendar fiscal year), the attached correction can correct the error.
If you do not yet use Release 4.5B with at least Hot Package 09, in the four following form routines you must implement the deletion/insertion sequence listed in the attachment only once. Do not implement them twice each time as described in the "Corrections" section.
- Form MARD_UPDATE_JW_DB2DB4
- Form MCHB_UPDATE_JW_DB2DB4
- Form MSKA_UPDATE_JW_DB2DB4
- Form MSKU_UPDATE_JW_DB2DB4
Caution: Implement the corrections WITHOUT comment lines or added comments !!!
Comments between EXEC SQL and ENDEXEC can lead to the 'DBIF_DSQL2_SQL_ERROR' at the fiscal year change.
If you carried out the fiscal year change in Release 4.5 or 4.6A and use R/3 Physical Inventory Management, you can, after implementing the attached correction in your system, repair the affected records as follows:
Run correction report ZREPPI_FLAGS.
After the execution of report ZREPPI_FLAGS, you should implement report ZINVUT30 mentioned in Note 67072 in your system and execute the report for those materials for which a physical inventory has already been executed in the current fiscal year.
If you recognize the inconsistency only in a later period, also refer to Note 355939.
Trust this helps
Regards
Merwyn

Want to maintain Material Master fields as default

Dear Friends,
Material Pricing Grp
Product Hierarchy
Acc assignment grp
Item cat Grroup (sales)
This fields I would like to make as default with recpective val.
Let me know if u hav solution.

Hi N Thombare
You can maintain these fields as mandatory in your material master...U must be using field reference i.e. say for eg 0001 or whatever which u can see in T Code "<b>OMSA</b>".......Against that field reference; u keep below mentioned fields as mandator i.e. in T Code "<b>OMS9</b>"........But these will help u to keep these fields as mandatory.......which means w/o entering values; u may not save material master
If required; assign these fields to field groups in OMSR
I hope it will solve your problem
Rgds

Material Master Field Selection

Hi,
I want to know whether the field from costing view of material master MBEW-HRKFT is made mandatory for a material type or not?
how can I check the same?
Thanks in advance

Hi,
1. First go to OMS2 > Here for material type, get the "Field reference Key"
2. Then go to OMS9 > Here in search help of Field sel. group, search for "MBEW-HRKFT" and select it. (It will come as 41)
3. Now click on "Position" buttom and enter the Field reference Key got in Step1 and selct it by pressing enter button. Now select "Reqd Entry" Radio button
But, it will activate all the relevant fields in Costing view, not only this field.
So go to OMSR, here search Field Name "MBEW-HRKFT" and assign a new selection group (For e.g. 239)
And now In OMS9 - Do necessary field selection for this Field sel. group 239 as suggested in above steps (1/2/3)

Material Master Field Selection Group

Hi Experts
In Material Master
Under MRP2 View - Field # Prod Stor Loc, (MARC - LGPRO) appears & Work Scheduling view, under Field Selection Group: 77
Now I want to also add/extend this field: MARC - LGPRO in Plant Storage 1/2 view. Possible ?
What are the steps involved.
Rgds
RG

Hi,
Go to OMT3B, here select Entry "21" (Std ind.(short) tab pages) and double click on "Data screens" and here select entry "21 + 18" (General Plant Data / Storage 1) and then double click on "Subscreens" and maintain following entry;
21 18 4 SAPLMGD1 2484

Help figuring out Material Master fields

Hi,
I am loading a material and not able to map the following source file fields to the SAP fields. Can anybody please find out the SAP field names (and tables)? Thank you very much.
config_mat_ind
batch_mgmt_ind
purch_val_key
trp_grp
sernr_level
sto_cond
min_remn_shlf
ttl_shlf
sto_pct

Hello Yala,
Here is the field names
config_mat_ind - MARA-KZKFG
batch_mgmt_ind - MARC-XCHAR , MARA-XCHPF
purch_val_key - MARA-EKWSL
trp_grp - MARA-TRAGR
sernr_level - ????
sto_cond - MARA-RAUBE
min_remn_shlf - MARA-MHDRZ
ttl_shlf - MARA-MHDHB
sto_pct - MARA-MHDLP
Hope this helps
regards
Arif Mansuri

Material master - Field details- application- configuration details - reg

Similar Messages

Maybe you are looking for