Material master fields on plant level

Hi all,
is it possible that i can restrict fields on plant level, like one material type one field i want mand. in one plant and optional in other plant.
regards,
qsm sap

hi,
Yes, it posible:
go to SPRO
Logistics - General-> Material Master->Field Selection->Define Plant-Specific Field Selection and Plant-Specific Screen Selection (OMSA)
see the settings for the plant in field reference - you need a diferent reference to the diferent plants (group together similar plants - all the ones that you want the field to be mandetory should have the same field reference)
now go to OMS9 or OMSR
and set the field as mandetory for the field reference you have made in OMSA
good luck
shachar

Similar Messages

Adding a Z field in the material master at the plant level

Hi,
I want to add a new text field in the material master.
The data maintained inthis field should be easliy retrievable using some STD SAP Report or using Abap query ( SQ01/SQ02)
Please advise how do i do it.
Regards,

Hi,
I want to add a new text field in the material master.
The data maintained inthis field should be easliy retrievable using some STD SAP Report or using Abap query ( SQ01/SQ02)
Please advise how do i do it.
Regards,

How to maintain material master data in plant....

Hi all,
while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
Regards,
Balu

Hi,
Please check the below link for MMR creaion .
http://web.mit.edu/sapr3/windocs/bpmdb01m.htm
Regards,

How to maintain the material master data in plant

Hi all,
while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
Regards,
Balu

Check the material available in MARC table in SE11 transaction against your plant.If it is not available please maintain through MM01 transaction.

Mass changes of Material Master field with different values

Hi,
How to change a field in Material Master for more than thousand materials. I think MM17 can only be used for mass changes of materials with same values. I need to upload different values for different materials. Is there any other way to do this.
Thanks,
K R Vishnu Kumar

Hi Kumar.
I think you have to use LSMW for mass updation for Material Master fields with different values.
Regards,
Rahul.

Valuation Class according to Material Master but not Plant wise

Hi,
Is there way to find out the Valuation Class according to Material Master but not Plant wise...
Plant wise, we can get into MBEW table, but I want to find valuation class directly...
Plz guide..

I need to change Valuation class against material number...
We have 18 plant in our company and more than 2,50,000 material's.
Which one easy task for change in material master, either 2,50,000 material's or 2,50,000 X 18 (45,00,000) material list.
If I go with plant wise, we need to change 18 times...also this is time consuming process... As I know in all Plant's, valuation class must be same...
please guide...

Blocking material for sale at plant level

Hi,
Can you please help me whether we can block the material for sale at plant level.
We can block the material in sales organization view --> DChain-spec. status as BLOCKED FOR SALE , but it wil block sales of the material for all the plants in the sales organization.
Please help whether we can go ahead at plant level.

the posting block for goods issues can already be reached with a material status, so no phyiscal inventory document necessary.
What you could try is to control the usage by a userexit.
E.g. you define a sales status AND a material status, just as table entry without any customizing in detail.
and in the userexit you check for the combination of sales status and material status, and if your material has this combination then send a error message to the user.

Reg.Material master field active & deactive setting

Dear All
How to set the material master fields as "Optional","Requirement" and "Hide". What is the tcode?
Please advise step by step.
Thanks
Rajj

first copy the screen field of mateiral master to get this press F1 on the the field adn from technical tas copy the the screen field (e.g MRP group MARC-DISGR) then go to OMSR transaction and hit field name and enter the value you have copy from mateiral
once you see that field on the screen then hit the Green yellow arrow from right side of screen whic will take the screen where oyu can make optiona, reqd or hide field.
but make sure here you make setting at appropriate field ref other wise it will impact many transaciton
e.g. if oyu want to make field optional in MM02 then don;t make field optional at ROH

Material master Fields Mandatory

Hi Guys,
i want to make some field mandatory, in Sales Org view of material master, Please help me where i have to go in SPRO for such setting
Regards,
Ashish

Hi Ashish,
First go to the respective field for which it has to be made mandatory. Note down the Table name and field name.
Go to SPRO--> Logistics General --> Material Master --> Field Selection --> Assign Fields to Field Selection Groups.
click the position field name button and enter the table name - field name (eg MARA-TRAGR for Transportation Group). Note down the Selection Group. Then go to
SPRO--> Logistics General --> Material Master --> Field Selection --> Maintain Field Selection for Data Screens
Kindly mention the field selection group that has been noted earlier and press enter.
Then in the middle Field Selection (Field Selection Group 1) can be seen select the field reference of the material type or MM01 for Create Material Master or MM02 for Change Material master as hide, display, reqd entry and Opt. entry.
Hope it will be useful, if so mention.
Regards,
Elanchezhian. K.C.

Locking and locking material master fields

Hi Experts
I have a scenario where we need to lock material master field to be locked once data is maintained in the field so that its not editable for the users to change by the users, later the change should be possible for the field through an interface.
Any inputs on how to achieve this.
Thanks
Vickey

Im not sure how to get a direct solution for your scenario, but maybe you can use Authorization group to control who can access to this material instead?
Just a thought.

Transportation group field in Material master..Sales/Plant data tab.

Hello Gurus,
The transportation group field in material master is Material specific or a plant specific?? caz whenever i am changing this transportation group field in one plant it is also updating with the same value in all the plant for the common material even though the Company code and Country are different forall the plants.
Hope to hear from you soon as its a very high priority production issue..
regards
Rikinl

The transportation group field in material master is Material specific or a plant specific??
Its material specific. Even if you have multiple sales areas or plants and if you change the transportation group, the change will be applicable for those areas also.
thanks
G. Lakshmipathi

Material Master Field Change

Hi Experts
I have a Field in MRP2 View MARC -> Field LGPRO (Issue Storage Location).
I am using MRP2 view, only for this field.
1) Is it possible I can move this Field to Plant/Storage location view ??
2) How to restrict this setting only for particular material types.
Regard

You need to move the entire sub screen. If you go to SPRO->logistics General> material master>configuring material master--> define structure of data screens for each screen sequence. Say select 21 that is std ind ( short) tab pages and make a copy of that say Z1. In that if you go to MRP2 view the sub screen containing storagelocation field is with screen number 2484.
Now if you go to Plant storage data view 1 and select dialog structure subscreens; here the screen with 0001 can be changed to 2484. However since this is related to MRP view the maintainance status needs to be changed to D from L else you will not be able to see the fields. But if you change the status to D the orginal sub screens of Plant data/storage1 will not appear.
You will have to check that these subscreens can be moved to Gen plant data/storage2.
Finally you need to assing this Z1 under same node but assign screen sequences to user/material type/transaction/industry sector under that
SREf Trans Sref user Sref Matl type Sref : industry Ssq
01 * relevant material type * z1 ( the one which was created as above)
However material master being very critical it is advised not to make such changes and if any changes are made it has to be thoroughly tested for the impact.
Regards
Sangeeta

Archiving/deletion of material master record from Plant

Hi Experts,
I have 50000 materials in 0001 Plnat and recently created a new plant 0002. I transfered 2000 materials from 0001 to 0002. In this scenario when I run a report in Plant 0001, all the 5000 materials are appearing, which i dont want to see the transfered 2000 materials.
I tried with Archieving with SARA transaction but material is archived at Client level only, not at Plant level. Now I want to change the Material type (FERT)of those 2000 materials which are transferred to Plant 0002 to other material type(HALB). Can you please explain the chanllenges in this process ? or suggest other process.
Regards,
Bhagavan.

Hi,
You can change material type using transaction MMAM.
In this case systemw ill check the material should not have any inevntory posting.
It should not have a valuated stock.
New material type sgould support same amount of material views as old one ( it might have other master data present like purchasing info record).
Edited by: santosh sarda on Nov 12, 2010 5:32 PM

Material Master Field Restriction

Hi Team!
is it possible to restrict the setup of some specific field for an specific view in Material master, and let the rest of the field to be updated for the normal users that used to?
the views that I'm talking about are the MRP1 & MRP2 at the material master, the idea is that no one can modify certain fields that belongs to them,
could it be possible, pls let me know.
regarDs!!

Hi
You cannot restrict the material master feilds based on the user, because the feilds in the material master are not user specific.
It is based on the material type and also you can modify based on plant specific and industry specific.
May be you wont give certain users for authorization for MM02 transaction ,for that you cantact the SAP security guys in your
team,
If you want no one can change the MRP veiws you can do in the configuration settings,T,code OMSR the table name is MARC and based on the feild name you select the Display only, so no one can change the values.
Thanks

Material Master Field Selection Group

Hi Experts
In Material Master
Under MRP2 View - Field # Prod Stor Loc, (MARC - LGPRO) appears & Work Scheduling view, under Field Selection Group: 77
Now I want to also add/extend this field: MARC - LGPRO in Plant Storage 1/2 view. Possible ?
What are the steps involved.
Rgds
RG

Hi,
Go to OMT3B, here select Entry "21" (Std ind.(short) tab pages) and double click on "Data screens" and here select entry "21 + 18" (General Plant Data / Storage 1) and then double click on "Subscreens" and maintain following entry;
21 18 4 SAPLMGD1 2484

Material master fields on plant level

Similar Messages

Maybe you are looking for