Material Master for Creating new MM Transaction for creating material

hai techies,
i have a scenario where the client is already using a transaction to catch the related fields like material number, quantity and other related fields. but until now they have been using this as a central source of point to create a material. they have been using this to create materialsy for the service orientation.
Now they wanna use this same for the engineering concept lke creating the material for R and D and engineering BOM etc.
Will this have any change and any new fileds have to be captured for this?
Please advice me on this
Thanking you in advance.
Regards,
Gopalakrishnan.S

Hi,
You can create New screen ,sub screen with fields as per your requirement in material master and those fields can be linked to different tables and programs as per your business process.

Similar Messages

Create new business transaction for OBV3.

Dear All
In OBV3 how to create Business transactions as i want to create new
business transactions for the same.
Regards
VG

Dear All
Business transactions are system defined .
Thanks
VG

How to create new Partner Numbers for WE20?

Hello colleagues!
While creating new Source System for R/3 system in automatic mode providing existing RFC (SM59), system errored with message E0552 "Error during insert in port table".
I tried creating new Partner Profile "FI5FIN100D" in WE20 (partner type=LS of course) by copying existing "FI2FIN200D" partner profile (LOGICAL SYSTEM also), but I received error:
==================
Enter a permissible partner number
Message no. E0342
Diagnosis
The partner number 'FI5FIN100D' does not exist for the partner type 'LS'.
Procedure
Enter a valid partner number and make sure that this partner number exists for the partner type
===================
Where do I create this in BW? I tried WEDI but I received error:
=========
Transaction WEDI is an area menu and cannot be executed
Message no. OZ037
=========
I have SAP BW 3.0b, SP 26, Basis/Abap SP 48.
Can somebody help please?
Thank you in advance.
Mario Vallejo.

Hi Mario,
       In Partner Feild u have give the Logical System Name i.e particular to the client which is already create in SALE Transaction.It is taken by Basis People i think.I think it is already created .give that Logical sytem name in Partner Number.
For ex Partner Number: LGS100(This is created in SALE
                              Tr and assign it to
                              client i.e like 100 or 200)
       Partner Type : LS
     In PostProcessing Tab
         Type : 'US' or 'o'(depending on client)
        Agent : Randomly it (Generates)creates Number
        Lang : EN
Hope This Help
Sreeni

How to create new text symbols for the standard program.

Based on the customer's requirement, I need to create a new implicit enhancement for the selection screen.
I want to create new text symbols for the parameters and blocks, but I cannot change the standard ones.
Does anybody know something about that? Thank you.

hi ming yu,
example : %_MATNR_%_APP_%-TEXT -> this is the material description name in mb5b
change the description in ur enhancement implementation
%_MATNR_%_APP_%-TEXT = 'Material'
it is works only input/output field
Thanks&Regards,
naveen

How can we create new pricing requirement for a condition type

Hi All,
I am in urgent need of creating new pricing requirements for a condition type.
Or if there is already a conditin type existing and we want to make changes in the pricing requirements of that condition type, How can we do so ?
In short if you can let me know how does pricing get impacted by the condition types.
Thanks
Mark

Hi!
The common transactions for condition mantaining are VK11, VK12, VK13.
In SPRO - Sales and distributoin - Basic function - Pricing - Pricing control - *.
Is this what you want?
Regards
Tamá

When I try to open a project, the only option for a new track is for external MIDI device; when I try to open an audio or software instrument track, I get an error message saying that "the specified number of tracks could not be created. Reduce the n

When I try to open a project, the only option for a new track is for external MIDI device; when I try to open an audio or software instrument track, I get an error message saying that "the specified number of tracks could not be created. Reduce the number of tracks to create and try again." I didn't specify ANY number of tracks. Thanks for help!

Ah.. then I suspect you just need to go to Logic's prefs/Audio and check CoreAudio...
It has been unchecked somehow...
Also.. as an aside.. Be careful not to create such large subject names in future when posting here.. They can cause issues with replying to posts in such threads.. due to a bug in the forum software.. so please keep them short and to the point...
Cheers..
Nigel

Creating new logical ports for WSDL with several port types not working

Hi all,
I am trying to integrate some BODS webservice into the BPM. I am using CE 7.2 Kernel Version: 7.20.3710. When I am trying to assign a provider system in the application configuration I get following error:
The provider system successfully found the needed service, but its wsdl is without webservice policy. Thus the generated client configuration might not work because of different configurations between service and client (most probable a difference in the security settings). Either assign a provider system with access to wsdl with policy or manually create the client configuration.
The regarding provider system is using a communication profil where the authentication method is set to "none". Normally this configuration should work, but it isn't.
So I started to create new logical ports for each port type. But then I get the error:
Port type name of loaded WSDL does not match the port type name of the Service Reference.
I checked already the port type names in the WSDL but they are 100% the same. What I found was that the configuration is always trying to use the first port type in the WSDL. So I am not able to configure the other port types in the service group.
I also tried to do the same thing using a WSDL with just one port type and surprise it is working...
I hope somebody can help me out
Thanks in advance
Andy

Hi Andy,
Please check this Link: https://cw.sdn.sap.com/cw/docs/DOC-45012
Regards,
Naresh B

Can we create new partner types for quallity notifications in SAP system?

Can we create new partner types for quallity notifications in SAP system?
The business requirement is to limit the available entries for partners displayed when they search in quality notification. I have already created new partner functions & assigned the relevant partner types, however struggling with defining new partner types.
Would appreciate help in resolving this.
Thanks,
Nilesh

I know this customisation setting ...It allows us to create the partner functions & assign it to the partner determination procedure.
Then you can assign the procedure to the notification type.
This customisation setting does not solve the problem I have.
I'm looking for the partner type creation process which we assign to the partner function.
Edited by: NILESH BHAVE on Aug 12, 2010 3:06 PM

Create new CBO statistics for the tables

Dear All,
I am facing bad performance in server.In SM50 I see that the read and delete process at table D010LINC takes
a longer time.how to create new CBO statistics for the tables D010TAB and D010INC. Please suggest.
Regards,
Kumar

Hi,
I am facing problem in when save/activating any problem ,so sap has told me to create new CBO statistics for the tables D010TAB and D010INC
Now as you have suggest when tx db20
Table D010LINC
there error comes Table D010LINC does not exist in the ABAP Dictionary
Table D010TAB
     Statistics are current (|Changes| < 50 %)
New Method           C
New Sample Size
Old Method           C                       Date                 10.03.2010
Old Sample Size                              Time                 07:39:37
Old Number                51,104,357         Deviation Old -> New       0 %
New Number                51,168,679         Deviation New -> Old       0 %
Inserted Rows                160,770         Percentage Too Old         0 %
Changed Rows                       0         Percentage Too Old         0 %
Deleted Rows                  96,448         Percentage Too New         0 %
Use                  O
Active Flag          P
Analysis Method      C
Sample Size
Please suggest
Regards,
Kumar

How to create new starting conditions for a workflow of shopping cart

Hi all,
How to create new starting conditions for a workflow of shopping cart
SATYA

Excecute SWB_COND
Creating New:
Click on Create button. If you cannot see that it could be a authorization issue
then Business Object: BUS2121
Double Click the event linkage for one step workflow
Define the expressions, Check Consistency and click on Traansfer
Start Condition is created. If it is not Active click on the Red Button to make it Active
Editing Already existing:
Click on Edit Button If you cannot see that it could be a authorization issue
then select Business Object: BUS2121
Click on the condition part (White area) of the start condtion needing editing
Change the expressions, Check Consistency) and click on Traansfer.If it is not Active click on the Red Button to make it Active

Unable to create new structure code for System Items flexfield

Hi
I installed the R12 with Vision. In the System Items flexfield, I find one structure code "SYSTEM_ITEMS". But I am not able to create new code as I am getting the error. "FRM-41051 - Cannot create new records here ". Also the New icon is disabled.
Is this how it is supposed to work? Cant we create new structure code for System Items flexfield in Vision Database? Please help me to resolve this.
Regards
Reem

Hi Everyone,
Lets address your exact problem ::
I installed the R12 with Vision. In the System Items flexfield, I find one structure code "SYSTEM_ITEMS". But I am not able to create new code as I am getting the error. "FRM-41051 - Cannot create new records here ". Also the New icon is disabled.
Is this how it is supposed to work? Cant we create new structure code for System Items flexfield in Vision Database? Please help me to resolve this.
Yes ! The answer is that this is exactly how it is supposed to work.
In Inventory :: [ System Items KFF ] is supposed to be single structure whereas Item-Categories has Multi-Structure option.
For every Single Instance :: It is like this only ~ as a standard functionality.
And this becomes very very challenging ( but a very fruitful & long lasting ) exercise.
Thrash it with the clients :: Why should you ever have 2-3 different Item codification schemas when its the same enterprise ?
They might respond with different intelligence incorporated in the Item Codes.
Most of the Intelligence can be shifted to the Item-Categories as they are not long lasting.
&&&& This means that either you can push for non-significant part numbering schema or the partial intelligence.
Keep it small & simple !!
Ajay Kuma, 510-456-5322

Need to create a Z transaction for SE16

Hi All,
I have a requirement in which I need to create a Z transaction for SE16 and then restrict the access of that transaction to 3 tables and users cannot see other tables through this transaction. it would be fine even if this condition can be implemented on standard transaction(in SE16 with out creating a Z with the help of basis team).
I tried to copy the transaction and also the program (program name: SAPLSETB and screen 230 even this program is made a Z program)
but this is giving a short dump.
Please let me know if the process i am following is correct if not can you please suggest me a better one.
Thanks in advance.
Regards,
LRK.

Hi
U can assign your transaction to Z-report like this:
PARAMETERS: TAB1 RADIOBUTTON GROUP R1 DEFAULT 'X',
            TAB2 RADIOBUTTON GROUP R1,
            TAB3 RADIOBUTTON GROUP R1.
DATA: TABNAME TYPE TABNAME.
START-OF-SELECTION.
CASE 'X'.
    WHEN TAB1. TABNAME = 'BSID'.
    WHEN TAB2. TABNAME = 'BSAD'.
    WHEN TAB3. TABNAME = 'BKPF'.
ENDCASE.
CALL FUNCTION 'RS_TABLE_LIST_CREATE'
    EXPORTING
      TABLE_NAME               = TABNAME
*   ACTION                   = 'ANZE'
*   WITHOUT_SUBMIT           = ' '
*   GENERATION_FORCED        =
*   NEW_SEL                  =
*   NO_STRUCTURE_CHECK       = ' '
*   DATA_EXIT                = ' '
* IMPORTING
*   PROGNAME                 =
* TABLES
*   SELTAB                   =
   EXCEPTIONS
     TABLE_IS_STRUCTURE       = 1
     TABLE_NOT_EXISTS         = 2
     DB_NOT_EXISTS            = 3
     NO_PERMISSION            = 4
     NO_CHANGE_ALLOWED        = 5
     OTHERS                   = 6
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

How to create a Z transaction for CJ29.

Hi All,
I have a requirement to create a Z transaction for CJ29 as ZCJ29 with some changes to the screen like providing option for saving variant and selection multiple project definations.
But when i checkt the Proram by following System->status->Program in standard transaction CJ29. It is having many includes.
Can anyone tell what all needs to be considered to copy the screen and which are includes to be considered for this CJ29 transaction?
Regards,
Nitin.

hi nitin,
u need create a transaction variant in SHDO tcode.
where in u provide the standard transaction along with your ZTCODE and select CREATE it shows the relevant tcode and if u press on any key or press enter it will take you to the variant screen having all the screen elements of the tcode.
Here u can select the particular field u want to make as input only, invisible, as output only etc. check the check box & Presson
Exit and Save Pushbutton and save the changes in a local object.
know run your tcode. u shall c the changes made to the std tcode.
or else you don;t want any changes on the screen, then follow the steps mentioned abv by others ...
Hope u got the idea...
All the Best !!!
Thanks
Ravi

Urgent - Create new chat rooms for discussion

HI
Can anyone tell me how the user able to
a. Create new chat rooms for discussion
b. Assign groups who can usr collaboration
Thanks
shashank
Urs answer must be appreciat.

Hi Shahshank,
If you want to add user groups while creating a room also.. it is the same procedure.. instead of username enter the group name and add it as memebers.. this is from the room creation wizard itself.
Else if you want to add usergroups to an already existing room then you will have to make use of the Member Maintenance or room maintenance iview from where you can add or delete or change users permissions for an existing room.for this refer to
http://help.sap.com/saphelp_nw04/helpdata/en/2a/dfa0404dd52b54e10000000a1550b0/frameset.htm
Hope this helps,
Regards
Uma.
Also, the SDN way of Thanking is by assigning points to helpful answers !!!

Support , This is Thamer mohammad ,I can't remember my security question answers , so Please help me to Create new Security Question for my Account . Best wishes

Support ,
This is Thamer mohammad
,I can't remember my security question answers , so Please help me to Create new Security Question for my Account .
Best wishes

These boards aren't Apple Support; nobody here can reset the questions. Click here, phone Apple, and ask for the Account Security team, or fill out and submit this form.
(90021)

Material Master for Creating new MM Transaction for creating material

Similar Messages

Maybe you are looking for