Material Master load in SAP BW

Hello,
I need to load fron SAP ECC Article Characteristics Color and Size. I have created Generic and variant articles by color and size and I want to load in Bi the relation between variant article-size-color.
Is there any table in ECC to create a custom datasource or an standard one exists?
Thanks in advance for your help.
Aralar

Hi,
I feel, you posted question in a wrong Forum..Please post your question to the below forum.
[SAP ERP - Logistics Materials Management (SAP MM)|SAP ERP - Logistics Materials Management (SAP MM)]
Hope you will get quicker replies...
Best Regards,
Shiv

Similar Messages

  • Idoc for Material Master Specific to SAP AFS

    Hi All,
    I have requirement to create & extend the material master from Non-SAP to SAP specific to AFS industry, however can anyone suggest which inbound idoc needs to be configured in details like (Message type, basic type & process code)
       Also please suggest how it can be extend at the same time to different plants
    Thanks & Regards
    Parag

    Hi Tomek,
    Thanks for details, can you please guide / suggest on extend the mateial for other plants & Storage location as well after creation of material.
    Thanks
    Parag  

  • Material master loading in bi

    Hi,
    iam new to Material Master Extraction and loading, can some one tell the process about 0material_attr in sap bi from replication to reporting level what care should be taken....
    appriciate your help.
    Kiran

    Hi,
    once you replicated teh 0material_attr and text daat sources,, try to load teh data , before taht install teh objects of tarnasfer rules, update rules  of 0 material
    right click on dat source and create tarnsfr rules---- shows teh conete 0materaila_attr  the do that -- it auto matically goes to the  business conetent  the craete the info packege and load the data..
    i think in 7.0 version for 0 matereial  SAP delivered the transformations , you can use the same
    once you install all the transfer rules& Update rules or transformations
    then craete teh infopackege  and load the data.
    Thansk & Regarsd,
    sathish

  • Upload Material Master to non SAP Catalog

    Hi Guys,
    we are trying to create a process to upload Material Master and/or Purchasing Info Recordes data directly from the backend into an non-SAP catalog. So far I only know about report BBP_CCM_CATALOG_TRANSFER, that uploads replicated material master from SRM into CCM or MDM Catalog.
    Are there reports available in the backend  (ECC6 EhP3) or in SRM 700 that could extract the data from Material Master and Purchasing Info Records into a format (XML;CSV,..) that could be used to upload these data into a catalog manually or via PI.
    Any hints are welcome!
    Thx
    Dieter

    Hi Dieter,
    Yes you can run MECCM in your ECC system to transfer PIR and contracts as XML files.
    Regards,
    Nikhil

  • Material Master Replication From SAP R/3 to SRM

    Hi Gurus
    For the testing, I maintain a Job for the program SMOF_DOWNLOAD on daily basis in SRM system and I created the 5 material Masters in R/3. I am facing two issues.
    1. The Material Master are replicated immediately, its not working as per the job Scheduled ( I  Scheduled the job on every day night at 24:00:00).
    2. I am able to see the R/3 Material Masters in SRM system in tcode COMMPR01, but I am unable to use the Product IDs in SC creation, I am receiving the error message as "Product 1000056822 does not exist in plant 1560 or it has been flagged for deletion (Item Test SAP R/3 to EBOP )".
    My material master is relevant to plant 1500, I change the plant 1500 in SC basic data, but the error is not disappearing.
    Please suggest me.
    Thanks in advance
    Thanks & Regards
    Sada

    HI,
    Check if the plant is defined in the PPOMA_BBP org structure.
    If you have not defined the org elements in the extended attributes tab then the system will not know in which plant the material is been created.
    Thanks & Regards,
    Kiran

  • Create material Master by connecting SAP Tables to SQL server tables

    We would like to use data in SQL server tables to upload material master into ECC. We have a number of rules embedded into the SQL server tables and would like that the LSMW program should pick up records directly from the SQL table without passing through a flat file format. Can anyone guide us how to accomplish this. We are on SAP AFS ECC 5.0 Thanks in advance

    Is anyone having any ideas on this ...?

  • Material Master Load Problem

    Hi,
    I am using LSMW to load the material master and using the standard program RMDATIND.
    I am able to create the material but it does not fill the storage location even there is a storage location in the input file.
    It does not give any error. It says material created successfully. But when i go to MM03 and check the material it don't have the storage location associated with that material.
    Please help. Let me know if I am missing some thing. Appreciate you guys help.
    Rohit

    Hi Darhan ,
    I checked the mapping. It is fine and able to get the storage location from the file. I found out that I have to check the field XE1L1 for storage location view. I checked that field it created the material for that storage location. But now problem is it does not created the other view if I set this field. It creates the warning with message  "The data for the maintenance statuses BG cannot be transferred"
    Please suggest.
    Thanks

  • SAP Business Connector with Java (material master data)

    Hey,
    I have a question about the SAP BC. What are the steps I have to do, to use the BC with a Java program?
    My task is to create a program which downloads material master datas from SAP.
    I just installed the BC, and hope, that I did it correctly
    Many thanks in advance!!
    Kind regards,
    Alex
    German Version:
    Hey,
    wie ich oben schon geschrieben habe, habe ich ein paar Fragen zum SAP BC. Ich habe ein Hochschul-Projekt und muss hierfür Materialstammdaten aus SAP herunterladen und mit einem Java Programm ausgeben lassen.
    Kann mir vielleicht jemand weiterhelfen, wie die Schritte hierfür aussehen?! Wie verbinde ich den BC mit meinem SAP System? und wie bekomme ich anschließen die Daten mit einem Java Programm ausgelesen?
    Ich habe bereits den BC installiert und konnte mich meines Wissens auch richtig anmelden;-)
    Ich hoffe, dass mir jemand weiterhelfen kann und bedanke mich schon im Voraus für eventuelle Antworten!!!
    Viele Grüße
    Alex
    Edited by: Rolf Gersbacher on May 19, 2010 10:34 PM

    Hi,
    I work with SAP BC some time ago... I remember that you configure the connection in SM59 / SICF and the server open a port to "listen" (connect external).
    So, your external program can execute functions inside SAP and exchange data.
    See some links:
    http://en.wikipedia.org/wiki/SAP_Business_Connector
    http://help.sap.com/saphelp_nw04/helpdata/en/6a/3f93404f673028e10000000a1550b0/frameset.htm
    http://www.thespot4sap.com/articles/SAP_XML_Business_Integration.asp
    Best regards,
    Leandro Mengue

  • Can anyone Explain about Data conversion for Material master In SAP MM

    Can anyone Explain about Data conversion for Material master, Vendor  In SAP MM
    Thanks

    Hi,
    Refer following link;
    [Data Migration Methodology|http://christian.bergeron.voila.net/DC_Guide/Data_Migration_Methodology_for_SAP_V01a.doc]

  • Non-SAP to SAP Material Master Data Transfer

    Hi Experts,
    Please indicate any standard tools in SAP and how to use it wherein we can migrate non-SAP material master data to SAP.
    Points will be awarded.
    Regards,
    LM

    Hello Leo,
    There are a number of options to do this. You can use the standard SAP tool named LSMW - Legacy System Migration Workbench (transaction LSMW) as a starting point.
    Also please read this [Documentation|http://help.sap.com/saphelp_47x200/helpdata/en/0d/414538bc0fe927e10000009b38f8cf/frameset.htm] before undertaking the data migration activity via LSMW.
    Additionally, there is also a Direct Input program available named RMDATIND - please go through the program documentation before you use it. You can use this program to transfer material master data to SAP but
    make sure you assign this program through LSMW for mapping structures etc. The internet link above will give
    more details and step-by-step instructions to follow.
    Hope this helps,
    Cheers,
    Sougata.
    p.s. It is sad to see useful answers remain unrewarded such as this one!
    Edited by: Sougata Chatterjee on May 9, 2008 10:13 PM

  • Idoc-To-File-Material Master.

    Hi,
    Please let me know the Partner Type and Partner Function to create Partner Profile for Material Master data in SAP R/3 side.(Outbound).
    Rgds
    Ruchitha.

    Hi,
    This is expalined both the scenarios:
    Please follow the below process for configuration:
    Pre-requisites for Inbound IDoc to R/3 from PI:
    Configuration required at Xi side:
    Go to IDX1: configure the port.
    Go to IDX2: load the DOC metadata.
    Go to SM59: Create RFC destination which points to R3 system this is require in the case where your IDOC is sent to R 3 system,
    Configiration required at R3 side:
    Maintain Logical System for PI (SALE transaction):
    Maintain Partner Profile for XI system(WE20):
    Pre-requisites for Outbound IDoc from R/3 to PI:
    Configurations required in R/3:
    Maintain Logical System (SALE)
    Define RFC Destination (SM59) which points to PI system
    Maintain Port (WE21)
    Maintain partner profile. (WE20):
    Maintain Distribution Model (BD64):
    DO let me know if you need more information
    Thanks and Regards,
    Chirag Gohil.

  • Unable to use SCAT to upload material master in ECC 6

    HI
    I am unable to use SCAT to upload material master in ECC 6,
    an error is triggering
    "Releases higher than 6.40 are not permitted
    Message no. TT005
    Diagnosis
    With Web Application Server Release 6.40, you cannot create new automated CATT test cases. However, you can create manual CATT test cases"
    canany body please help me to use SCAT
    Sreeram

    you have to read yourself:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/1b/e81c3b84e65e7be10000000a11402f/frameset.htm
    I certainly do not use SCAT or SECATT to load master data, especially not material master.
    A material master has  dynamic screens, based on the material type the view selection will be different, based on entries made in MRP view fields become hidden or mandatory. Such things canot be done with a static recording.
    SAP provides batch input programs and BAPIs for material master load and additonally loading per IDOC in LSMW (which offers as well batch input and Bapi methods)

  • Need to activate batch mangement in material master

    Hi MM  Experts,
    Need your all help in the below issue
    We need to select batch management for the material code but system will not allow selecting in material master, as per SAP note 30656; we removed complete stock from the same plant  but some previous month stock exist for that we posted stock in current month using 561 movement  and while reversing the stock in previous month posting date system not allowing to reveres getting an standard and moving price error message because they changed material price control from Moving to standard price in the current month.
    Now the current situation is system not allowing reversing the stock due to moving and standard price control change Please suggest us, what are the steps we need to carry out to flag batch management for that material code.

    Hi Jorgen,
    The complete steps mentioned for that material.
    1.Raw Material code created  previousely (In the month of FEB 2011)with price control (V) withought batch management
    2.In the month of Mrach 2011 Price control changed from V to S
    2,In the month FEB 2011 some Good movement document posted for the same material.
    3.From the month of March 2011 now they want to actiavte batch management for the same material
    4.We sujjested user to make nill stock for that material and activate the batch management.
    5.Then they removed the complete stock for the same material evn they getting some previous stock error.
    6.then we find out the note in sap 30656 and advised below steps.
    1. Post the same amount to current period stock (for example, using movement type 561) so that previous period stock and current period stock are identical.
    2. Make a withdrawal posting in the previous period for the stock together with posting date (for example, using movement type 562).
    7.while doing second step we are getting an error as price control changed from V TO S,due to changed in price control
    Please let me know if,you need any additonal Information
    Regards
    Dilipkumar

  • Cost center assignment based on material master

    Hi Experts:
    My client wants cost center assignment to be based on material master, for example, SAP system should be configured in a way that when costs arise due to a product price variance, then SAP should automatically post to the cost center for the specific brand instead of posting to only one default cost center. Is this really possible? In OKB9, I am only able to assign only one cost center to the GL account. Because of this, at the end of each month, the accountant manually allocates the costs from the overhead cost center to the respective cost centers for the brands which incurred this cost.
    Is it possible to configure SAP to detect that the cost belongs to product A therefore post this cost to Cost center for product A; or this cost belongs to product B therefore post this cost to cost center for product B?
    Your feedback is greatly appreciated.
    Thanks,
    Mariam.

    Hi,
    For your scenerio, try Derivative rule of Profit center. If you maintain Derivative rule for Profit center with product which is indirectly assigned to cost center.
    For example :
    Product A - Profit center1-cost center1
    productB- Profit center2- Cost center2
    Regards,
    Sreekanth

  • Legacy number in the material master

    Dear SAP Guru,
    Good day.
    We are currently in production support today and we want to understand how a legacy number differs from a material number. As we can see in the material master (Classification View) there is an indicated legacy number there with a corresponding value. Could you further elaborate on how and what is the usage of a legacy number?
    Thanks in advance for your help.
    Kind regards,
    JMT

    Jasmin,
    Basically some clients would be interested to track the SAP material number with referance to the Legacy material number, this data would be uploaded during the Cut-over and data conversion to SAP.
    I would suggest you look at the Functional/Tehnical specification document for the conversion program which was used for uploading the material master data into SAP, that would give you the business reason and the field mapping details.
    Regards,
    Prasobh

Maybe you are looking for