Material Master Migration: SAP Standard Programm RMDATIND has no MLAST fiel

Hi all,
I am migrating Material Master.
Material Ledger is active and I have to fill the field MLAST (Price determination) with '2' (instead of default '3') in order to migrate materials with VPRSV (Price control) 'V' (instead of 'S').
MLAST is from table MBEW, but it is not in RMDATIND, or it has onother name there or it has to be enhanced in the RMDATIN. I have no idea...
Someone can help?
Thanks
thomas

Guru,
Thanks for your answer...
You said, I'llfind the field in RMDATIND on the lowest level.
"So if you drill down to the lowest level of the structure you will be able to find them."
I was checking all structures from BMMH1 - BMMH8, but I cannto find it.
Could you please help me?
Thanks,
Thomas

Similar Messages

How to update info record price in to material master as a standard price -

Hi Experts,
We have a client requirement as below:
Client wants to compare the info record price per material for all related vendors.
Once he arrives at the best effective price (Material Price + Freight + Duty), he would want this price to update in the Material Master Record as Standard price.
I know we can use MR21 and LSMW to update this manually but we are looking to automate this process as we have more than 100,000 records in the system.
Can the above requirement be addressed through CK40N? if yes, How?
Thanks,
Jammy

Hi Jammy
Usually, in std SAP, if there are multiple condition records, the one with lowest price is considered by the system in CK11N/CK40N
Configure your valuation variant to pick up price from info record... As far as I remember, the one with lowest price would get picked up when you do costing run...
however, if your requirement is bit different than this, but is based on a logic which can be configured in the system, then use Valuation Strategy U in your Valuation Variant and write your code accordingly in the exit COPCP005 (Component EXIT_SAPLCK21_002.)
Regards
Ajay M

Foreign Trade Import/Export Tab in Material Master of SAP R/3

Hi
What is the use of Foreign Trade Import/Export Tab in material master of SAP R/3

Hi Akhil ..
Sounds like you need to enrol for the SAP Foreign Trade training course!
The tab holds various attributes for determining Foreign Trade data - for example the Customs classification and Country of Origin. Those data are used to determine and/or populate fields in the Foreign Trade data when processing MM and SD documents.
Some, but not all, of the fields in that tab become redundant if GTS is in use.
If you have more specific questions in this area, it might be easier to give better explanations.
Regards,
Dave

MM - Material master data - move standard field to another view

Hi everyone,
ÉCC 6.0 - release 7.0.
I've been adding many custom fields in Material master data MM01/02/03. Now I got a problem because we have to use a standard field in another view.
The field MARA-HERKL is set up to 'SV'(attribute V_130F-PSTAT):
Warehouse management = S
Sales = V
I want to add 'K - Basic data' in this field's attribute at OSMR Tcode , but this attribute is disactivated. I can not change this value.
I've check this note 306966 that mention: You cannot create new entries and delete entries in client 000. This client contains only the entries delivered by SAP which are used for distinguishing customer-specific fields and SAP standard during the maintenance of the other clients.
Is there any problem whether I delete this field and afterwards create it with the new values?
I'm not in client 000. So, I want to just make sure I will do a legal change.
thank you in advance,
Alexandre

None tips, Closed.

3 level of Material Hierarchy in Material Master in SAP R/3

Hi,
We have a requirement wherein we require 3 level hierarchy in all materials created. We have taken Material Type as the 1st Hierarchy. Now we are left with material group which can be the second hierarchy.
I looked into the possibility of material classification but it was not solving our purpose as there is no standard SAP reports for inventory which takes material classification as an input.
For your reference I will give an example.
1st hierarchy = Food ( Material Type )
2nd hierarchy = Dry Foods ( Material Groups )
3rd hierarchy = Bread
I am not being able to accommodate the third level in my material master. I know we can use product hierarchy but there are no inventory reports based on product hierarchy. We also don't have IS Retail.
Please suggest what can be done about the solution.
Thanks

Many different suggestions, however I cannot imagine how those suggestions can help to get an inventory report.
check the availabe inventory reports and see what selection criteria they have, e.g. MB52
I think you just have to develope an own report to get what you want.
And when you do this, then you can use classification for your hierarchy or product hierarchy, which is just one field instead of 3 different fields.
The classification is the only option that is considered in F4 search help without any modification.
And using multiple selection button for material number in the inventory reports may enable you to select all materials of a hierarchy based classification

Can anyone Explain about Data conversion for Material master In SAP MM

Can anyone Explain about Data conversion for Material master, Vendor In SAP MM
Thanks

Hi,
Refer following link;
[Data Migration Methodology|http://christian.bergeron.voila.net/DC_Guide/Data_Migration_Methodology_for_SAP_V01a.doc]

Importing of material master from SAP to MDM

Hi all
we are working for a scenario where we need to import data from SAP R/3 to MDM using IDoc and XI.MDM already provides standard T codes for collective generation of IDocs for vendor and customer master( what i mean is single IDoc is generated for a selection of mastres) but no such option is there for material master.
This means in the READY folder in case of material we will have say 1000s of xml files in case we are importing 1000 records from R3.
What is the way out??It becomes difficult to import all files one by one.What are different options we have?
regards-
Ravi

Hi Ravi,
Go to the transaction MDM_CLNT_EXTR.
Select Extraction Object:MATERIAL_EXTRACT
Give Target sytem ( XI Sytem)(This should create with SALE transactio, ALE IDOC Settings)
Distribution Mode:I
Create a variant for this and save
Come to the same transacction again, select the saved variant.
Press ENTER button
Click 'Start Extraction ' button.
Then this program will send all the material from SAP R/3 system to the target system.
Regards,
Nikhil

Relating product compilaence with the material master in SAP R3 system

Hai SAP Gurus,
Please can you help me to mark a material in relation to the product compilance or regulatory requirements like RoH, CSA, EC, Copy exact in the SAP Standard process. please note that we are not using SAP EH&C and the client is asking this requirrement in the SAP R3 System. Is this possible to link this with material master? If so can u kindly explain me on this please.
Thanking you in advance.
Regards,
Gopalakrishnan.S

Hello
If you do not use EH&S one option is to use a material class to mark the matrial as Rohs etc. relevant. As this is only a matter of storing infomation not futher process is linked to this data maintenance. If you wouldlike to use this stored data e.g. in SD, MM or PP processes you have to do it by your own programming. SAP EHS Management on the other hand gives you a number of options to use data like RoHs wich is store in EH&S further processes.
In any case: srtong recommendatino would be: do not try to use a lot number of material classes to do the same lik you are doing in EH&S.
Regarding regulatory demands EH&S is a "must" and wel integrated in SAP process (e.g. GTS, BW, SA Procudt and REACH Compliance Suite etc.)
Using EH&S is not such a "big" problem and there aer many companies which can assist in using EH&S .
With best regards
C.B.
Edited by: Christoph Bergemann on May 20, 2011 8:16 PM

Identification on material master in SAP Retail

Hello,
I have a question regarding the material master and if it is possible to somewere enter an age or signal if a consumer have to show an identification when they buy some kind of materials? In Sweden you have to show a identification (f.ex drivers license) when you buy cigarettes. You have to be a certain age to buy this. Now i would like to ther the age on the material master. Is there a standars field for this?
Best Regards
Ann-Sofie Svensson

Hi,
Option 1: If you use "Scales group" in POS view of Article Master, then this information will trigger to your 3rd Party POS System.
Option 2: This can be configured using your 3rd party POS System plus unused article master data field.
Now, you can search SKUs at each Till.
Pls interact with your POS Consultant.
Regards,
Muralidhara

How to create Variant Configuration Material Master in SAP PP

Dear Friend's,
Pl 's guide me for How to Create Variant Configuration Material Master.
Give me step by step procedure for Creation of Variant Configuration.If some of you having screen shots for the same with one Example, that will be a very helpful to me for creating VC.
Thanks & Regards,
Sandeep N.Theurkar

Hi,
Eg: Ford car.If a sale order is raised for fiesta lxi model the system should choose red colour & for vxi blue colour respectively.
ie you need to define the characteristic and assign the values .
This characteristic need to assigned to class.
class need to be assigned to material master
1. T.code : CT04(characteristic) FORD_MODEL, Choose single value & entry required tab & give the input as 01 - fiesta_lxi & 02 - fiesta_vxi.( characteristic values)
2.Tcode: CT04, FORD_BODY( another characteristic)
Choose single value , don't click entry required.
01 - Red( characteristic values)
02- Blue
3. Create class T.code : CL02
fiesta_class
type : 300
4. OBJECT DEPENDENCY:
T.CODE : CT04
FORD_MODEL
CLICK VALUES TAB,
IN FIESTA_LXI CLICK THE 'O' meant for Obj dependency, action & extra.
Edit the dependecy,
010 $Self.ford_body = '01'. & save
Repeat the same for FIEST_VXI & instead of '01' give '02' for blue colour.
, then create a ROH as ford_body. & a KMAT material for the car. .
Then create a Super BOM with usage 3 & give component as ford_body
Then use T.code cu41 (Create config profile)
enter a profile name & class 300 & choose class assignment, choose fiest_class ,
Use T.code cu50 to check the values.
Then create a sale order.
Pl. reward if helpful.
Regards,
nandha

Material master account view1 Standard price by currency type

Hi
We have an issue in material master. When we create new material (Material Ledger activated) accounting view1 we are not getting fields for group currecny fields. How to get these fields.
Regards
Padma

do you have the field for old materials??
did you run startup for ML??
or did you define group currency for ML thru OMX2 ???

Material master upload to new SAP system

Hi,
Please help me to decide the procedure on migrating material master from ECC 5.0 to ECC 6.0.
One of my idea is to use LSMW and other is to use ALE.
I am expecting many changes in the current material master, so using standard ALE BD10 is difficult. Example: ECC5.0 material type "ABC" would be "XYZ". (XYZ and ABC are of same material type, example: FERT). I choose to have different material number in new system. Like that there are few more changes.
What are all the best methods to extract the data from ECC5.0? I was checking the program RMDATGEN to download the data, but it is not readable. I can prepare a file format and map the columns in ECC6.0 LSMW. Since both the systems are SAP, I am thinking why to prepare a seperate input file format? Again I need to download the data from ECC5.0 for that format. Is there a simple to download and upload the data? Please let me know.
Thanks
Nagarajan

Here you define your Partner profile:
IMG > Application Link Enabling (ALE) > Modelling and Implementing Business Processes > Partner Profiles and Time of Processing > Maintain Partner Profile Manually
And in the details you define for yor message type MATMAS:
Receiver port: X
Output mode: Collect Idocs and Do not start subsystem
This collection writes the idocs to a file.
This file can then be found in SAP file system with transaction AL11.
a clever basis guy can then move it from there to your network.

What is the standard program for Material Master upload using LSMW

Dear All
I am trying to use the MM upload using DATMIG_INF4. I want to know what are the different standard projects that are used for Material master upload.

Hi Amol,
You can load the material master using direct input method in LSMW ,details of which are as follows:
Object               0020   Material master
Method               0000
Program name         RMDATIND
Program type         D   Direct input
Please revert back in case of any doubt.
Cheers
VJ

BAPI for create material master (SAP version 40b)

Hi,
Anyone know BAPI for create material master for SAP version 40b?
There's no BAPI_MATERIAL_SAVEDATA.
I try to use BAPI_MATERIAL_MAINTAINDATA_RT,
but seems that BAPI only for retail.
Kindly advice!
Thanks,
Victor.

Hi,
    this one works pretty good.
call function 'MATERIAL_MAINTAIN_DARK'
         exporting
              sperrmodus                = ' '
              kz_prf                    = 'W'
              max_errors                = ' '
              p_kz_no_warn              = 'X'
              kz_verw                   = 'X'
              kz_aend                   = 'X'
              kz_dispo                  = 'X'
              kz_test                   = ' '
              flag_muss_pruefen         = ' '
              call_mode                 = 'ACT'
         importing
              number_errors_transaction = numerror
              matnr_last     = last_matnr
         tables
             amara_ueb      = i_mara    "Basic Data
            amakt_ueb      = i_makt    "Descriptions
             amarc_ueb      = i_marc    "Plant
            amard_ueb      = i_mard    "Storage Location
           AMFHM_UEB      = I_MFHM    "Production Tools
            amarm_ueb      = i_marm    "Units of Measure
           AMEA1_UEB      = I_MEA1    "Internal Mangagement - EANs
            ambew_ueb      = i_mbew    "Accounting/Costing
            asteu_ueb      = i_steu    "Tax Data
            astmm_ueb      = i_steumm "Tax Data
           AMLGN_UEB      = I_MLGN    "Warehouse Data
           AMLGT_UEB      = I_MLGT    "Storage Type Data
           AMPGD_UEB      = I_MPGD    "Change Documents
           AMPOP_UEB      = I_MPOP    "Forcast Parameters
           AMVEG_UEB      = I_MVEG    "Total Consumption Data
           AMVEU_UEB      = I_MVEU    "Unplanned Consumption Data
            amvke_ueb      = i_mvke    "Sales Data
            altx1_ueb      = i_ltx1    "Sales Text
           AMPRW_UEB      = I_MPRW    "Forcast Values
             amfieldres     = i_delfields
             amerrdat       = i_errors
         exceptions
              kstatus_empty             = 01
              tkstatus_empty            = 02
              t130m_error               = 03
              internal_error            = 04
              update_error              = 05
              too_many_errors           = 06.
Otherwise try BAPI_RETAILMATERIAL_CREATE
BAPI_STANDARDMATERIAL_CREATE
<b>Reward points</b>
Regards

Material Master BDC recording

hi gurus,
i am trying to do a material master creation using BDC recording,
i am new i dont know how to modify the code,
the following is the code, please let me know how to make changes.
report ZTEST95
       no standard page heading line-size 255.
include bdcrecx1.
parameters: dataset(132) lower case default
                              'C:\Documents and Settings\Deskt'
                            & 'op\test95.txt'.
   DO NOT CHANGE - the generated data section - DO NOT CHANGE    ***
If it is nessesary to change the data section use the rules:
1.) Each definition of a field exists of two lines
2.) The first line shows exactly the comment
      '* data element: ' followed with the data element
      which describes the field.
      If you don't have a data element use the
      comment without a data element name
3.) The second line shows the fieldname of the
      structure, the fieldname must consist of
      a fieldname and optional the character '_' and
      three numbers and the field length in brackets
4.) Each field must be type C.
Generated data section with specific formatting - DO NOT CHANGE ***
data: begin of record,
data element: MATNR
        MATNR_001(040),
data element: MBRSH
        MBRSH_002(001),
data element: MTART
        MTART_003(004),
data element: REF_MATNR
        MATNR_004(040),
data element: XFELD
        KZSEL_01_005(001),
data element: MAKTX
        MAKTX_006(040),
data element: MEINS
        MEINS_007(003),
data element: MATKL
        MATKL_008(009),
data element: SPART
        SPART_009(002),
data element: MTPOS_MARA
        MTPOS_MARA_010(004),
data element: BRGEW
        BRGEW_011(017),
data element: GEWEI
        GEWEI_012(003),
data element: NTGEW
        NTGEW_013(017),
      end of record.
End generated data section ***
start-of-selection.
perform open_dataset using dataset.
perform open_group.
do.
read dataset dataset into record.
if sy-subrc <> 0. exit. endif.
perform bdc_dynpro      using 'SAPLMGMM' '0060'.
perform bdc_field       using 'BDC_CURSOR'
                              'RMMG1-MATNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_field       using 'RMMG1-MATNR'
                              record-MATNR_001.
perform bdc_field       using 'RMMG1-MBRSH'
                              record-MBRSH_002.
perform bdc_field       using 'RMMG1-MTART'
                              record-MTART_003.
perform bdc_field       using 'RMMG1_REF-MATNR'
                              record-MATNR_004.
perform bdc_dynpro      using 'SAPLMGMM' '0070'.
perform bdc_field       using 'BDC_CURSOR'
                              'MSICHTAUSW-DYTXT(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(01)'
                              record-KZSEL_01_005.
perform bdc_dynpro      using 'SAPLMGMM' '4004'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'MAKT-MAKTX'
                              record-MAKTX_006.
perform bdc_field       using 'MARA-MEINS'
                              record-MEINS_007.
perform bdc_field       using 'MARA-MATKL'
                              record-MATKL_008.
perform bdc_field       using 'MARA-SPART'
                              record-SPART_009.
perform bdc_field       using 'MARA-MTPOS_MARA'
                              record-MTPOS_MARA_010.
perform bdc_field       using 'BDC_CURSOR'
                              'MARA-BRGEW'.
perform bdc_field       using 'MARA-BRGEW'
                              record-BRGEW_011.
perform bdc_field       using 'MARA-GEWEI'
                              record-GEWEI_012.
perform bdc_field       using 'MARA-NTGEW'
                              record-NTGEW_013.
perform bdc_dynpro      using 'SAPLSPO1' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                              '=YES'.
perform bdc_transaction using 'MM01'.
enddo.
perform close_group.
perform close_dataset using dataset.
thanks.

Hi,
It is better if the Material Master creation step is done by LSMW - Direct Input method with the following object:
Object               0020   Material master
Method               0000
Program name         RMDATIND
Program type         D   Direct input
Check the program documentation for more details.
For a sample data file generation ( Sequential file ), check the program RMDATGEN
If the reqmt., is for a repetetive loading of Material Master you could schedule / execute the LSMW by following program: /SAPDMC/SAP_LSMW_INTERFACE.
Hope this helps.
Best Regards, Murugesh

Material Master Migration: SAP Standard Programm RMDATIND has no MLAST fiel

Similar Messages

Maybe you are looking for