Material master MM01

Hi,
I am working on ECC 5.0.
I am trying to create a material but facing a problem.
Earlier I had created a material type Finished product and Industry Sector: Retail successfully.
Now I am trying to create a material of same Material type and Industry Sector.
In the Sales Organisation Data 1 tab, I am not able to see the tax data fields.
I have checked all the configuration settings in SPRO in material master settings but there I am able to see the screen properly.
But when I try to create the material, tax data info is missing because of which I am not able to create the material with required information.
Please help me solve this problem.
Thanks and regards
Amit

HI Amit,
I think this is the problem with the screen sequence which is assigned. It would be vey convenient if you can take the help of a MM consultant in setting up the right sequence.
go to Logistic General - material Master-configuration of material master & follow the below steps:
1. Go to Material Master Select the Field which to be made optional. Press F1 and copy the Table and the Field Name (Technical).
2.Go to SPRO-F5-Logistic General Material Master Assign Fields to Field Selection group
3.Give the details of Table and Filed name by Selecting Field Name. Note the Filed Selection Group No.
4.Go to SPRO-F5-Logistic General Material Master Maintain Field Selection for Data Screens.
5.Give the Group No. and Make the required Field as Optional.
take the help of MM consulatnt.
REWARD IF IT HELPS
REgards
Srini

Similar Messages

How to activate the new fields on material master(MM01/MM02/MM03) for existing Materials

Hi,
We have a requirement to add some custom fields as a new tab in additional data option(Descriptions, Unit of measure, etc.) in Basic data of Material master (MM01/MM02/MM03). I have successfully added and these custom fields and they are not part of standard(MARA, MARC) but a custom table and the updates are also done in custom table.
For new materials, I can see the new tab in additional data screens of basic data view and I could successfully create/change/display using MM01/MM02/MM03. However I cannot see the new tab/fields for existing materials in the system in all 3 tcodes (MM01/MM02/MM03). This is not a main view in material master so that I can extend it by MM01.
Is there any setting or mass generation program I have top perform so that I can see and maintain these new fields for existing materials. Appreciate any leads or help on this.
Thanks,
Harry

Hello Harry,
Goto t.code SPRO ---> Display IMG ---> Logistics - General --> Material master --> Configuring the material master --> Create program for customized screens
Use the above path and create the screen and assign it to the sequence using the below link as reference.
**************** - Tips - Implementing screen exits for MM01/MM02/MM03
Regards,
Thanga

Add custom field in MRP area-MRP 2 in material master(MM01/MM02/MM03)

Hi
As per my requirementn we have to add one field in the Material master(MM01/MM02/Mm03). Mentioned path below.
MM01/MM02)--> MRP1 tab --> in the MRP areas > click on MRP AREAS button>Pop will come with MRP AREA --> double click on entry > MRP area screen will appear> In MRP2 data tab> i've to add a new custom field. Program Name> SAPLMD_MGD1
Screen --> 0040
Is there any exit/customization which can be used to do this?
i was unable to find a exit for the same.
Thanks,
Gauri

Hi Gauri,
See Note 44410 - Integrating cust.-specific fields in matl master, I think that it will help you
Regards
Eduardo

Error when I create the New material Master (MM01) for New Plant.

Dear experts,
I got the error when I create the New material Master (MM01) for New Plant.
Error: Valuation Area 2800 Not yet productive with Material Ledger.
So Pl send me the solution asap.
Venkata Raju Khottari

Hi,
Have u assinged Plant to Company code?
If u say no, use T.code OX18.
Regards,
Murali
Assign points if it is useful.

I want to upload material master (MM01) using LSMW with BAPI method

I want to upload material master (MM01) using LSMW with BAPI method and also later on I may need to change the updated data.
Which business object and Method I should use so that i can do both.
Thanks
kumar n

Hi,
The business object is BUS1001.
Thanks,
Murali

PARAMETER ID VALUE NOT DEFAULTED in CREATE MATERIAL MASTER (MM01)

Hi,
Currently when we create material master we like to defualt the field material group, using PARAMETER ID (MKL-Material group).
I have defined the parameter ID for MKL(material group) and assigned a material group value, log off and log in again.
When I create material master with MM01, the PARAMETER ID is not pickup, the field material group is not defaulted with value defiend for the parameter ID.
Anyone know why it did not works, and how to make the material master field defualted with PARAMETER ID??
best rgds,

As suggested by Jurgen Parameter ID wont work for Data Maintenance screens.
You can go for Transaction Variant SHD0 and Set the Field as Default.

Problem while creating Material Master (MM01)

Gurus,
I am novice to sap sd, and I am trying to create a Material (MM01) for a Customer, and have given the inputs 'Material', 'Industry sector' etc.
To my surprise, I am unable to see ' 'Sales org 1' , 'Sales org 2' ' Sales : General plant' tabs .
Should I need to enable something to view these tabs ?
All I could view is 'Organizational levels' ' check screen data' ' Additional data'
Kindly bare for this silly question!
Thanks,
Karthik

Hi,
Try to create a Material in this way. Check whether you are using same steps.
Go to MM01
Enter Industry sector & Material type (Eg: FERT - Finished Products)
Click on "Select view(s)" button option without pressing Enter key directly.
Then you should be able to see all tabs listed in "Select view(s)" pop up window.
Check whether "View selection only on request" tick box is marked. If it's marked, Un-tick it. If you have marked that, then this screen will not automatically appear.
Highlight relevant tabs.
Press "Organizational-levels" button in that pop up.
Enter relevant Sales Org/ DC & Division.
If "IOrg. Ievels/profiles only on request" is marked, then Un-tick that also. Its for same purpose as above.
Press Enter.
Now check whether you get those tabs in the Material Master.
Best regards,
Anupa

Add fields to material Master (MM01)

Hi Experts, after checking OMS2, OMS3, OMS9, OMSA...I still have no idea about how to show some fields in my material master data. They belong to group 103 which is assignet to material type FERT and Basic Data 1. They are setup as "Optional" but they are not shown when I try to create a new material.
I expected to find it easy to solve, as when you modify others screen layouts (p.e. Materials Management> Purchasing>Purchasing Info Record-->Define Screen Layout) but it seems not. Any idea?
Thank you

Hello Cristian,
You cannot define the field selection for an individual field, however,
the fields are grouped together in field selection groups.(Customizing
'Assign Fields to Field Selection Groups') The input/output attributes
are determined per field selection group.For the specification of the
properties of a field selection group, there are several criteria. They
are called field selection references.Not only one criterion (= field
selection reference) is relevant for the definition of the field
selection attributes but SIX criteria are.
Some of the field selection references are hard-coded (for example,
transaction) others can be defined (for example, plant, material
type...).In the following, the six field selection references are listed
and also the transactions in which they can be defined.
1. Transaction (MM01, MM02 ....)
2. Industry sector (you can assign the field selection reference to the
    industry sector by using Transaction OMS3)
3. Material type (You can assign in field FELDREFERENZ by using
    Transaction OMS2.The name of the material type is not automatically
    the field selection reference but it depends on what is on field
    FELDREFERENZ in Transaction OMS2.If the field is empty, there is no
    specific settings for this material type.)
4. Plant (you can assign the reference to the plant in Transaction
    OMSA)
5. Procurement-releated field selection references. There are the two
    field references E (internal procurement) and F (external
    procurement). It depends on the settings in Customizing for the
    corresponding material type under 'Internal/external purchase
    orders' whether one or which one of the field references is used. If
    internal purchase orders are allowed (setting 1 or 2) and external
    orders are forbidden (setting 0), the field selection uses E. If
    external purchase orders are allowed (setting 1 or 2) and internal
    orders are forbidden (setting 0), the field selection uses F. When
    both internal and external purchase orders are allowed, the field
    selection uses neither E nor F.
6. Customer-specific field reference KB (customer-specific
    requirements)
Since a field can have only one attribute at the end (display = '*',
change = '.', hide = '-', required entry = '+') a property must be
determined from these six criteria.You do this by prioritizing the
above-mentioned properties:
The hide function has a greater effect than the display function.The
display function has a greater effect than the required entry function
and the change/ready for input function has the least effect.
If for one of the six mentioned field selection references 'Hide' is
set for the relevant field selection group, all fields which were
assigned to this field selection group are hidden, no matter how the
attributes were set in the other five field selection
references.Therefore, you must always check all six field selection
references.It is not sufficient just to look at one field selection
reference.
If you checked this setting and, however, the field does not have the
display attribute required, then it is possible that the attributes of
the field are hard-coded.
Regards,
Mauro

Error while creating a material master (mm01)

hi,
I'm getting this error message when I'm creating a material master in a specific plant/sloc. I'm probably guessing its in config. I really need some help here.
"Tables TCURM and T001W inconsistent; notify your system administrator" .
could any one draw some light on this.
thanks regards,
chinta

HI,
Before creation of plant 1st check in t.code:OMSA and see your plant assigned to field reference.
Check in t.code: OMSY, see your company code entry & active for material management.
Also check your plant is active for your material type in t.code: OMS2 with quantity & value updating.
###Check assignment of plant to company code in t.code: OX18 and see activation of your valuation are in t.code: OX14
Just cross check all material master customisation , refer link with t.codes:
Re: Material Master
Regards,
Biju K

Update Termination while creating Material Master MM01

Hello,
While creating the Material Master system is throwing the error Update was Terminated.
Before that we have client copied.
Can anybody throw some light??
Regards,
Kumar Rayudu

Hi,
Check the material number ranges are copied ?
in SPRO>LOGISTICS GENERAL>MAT.MASTER>BASIC SETTING>NUMBER RANGES FOR MAETRIAL TYPES
BR
Diwakar

Price zero in material master:MM01

When I create a material , system is asking moving avg price, std price (Accounting 1 view). It is mandatory. In some cases I want to maintain price as zero which system is not allowing. How to make system to accept proce as zero for a material.

Dear,
With a standard price S in Material master you can enter price as Zero but as soon as you enter Zero goes & SAP treat is as a blank field & issues a message "Enter a price" .However even if you don't enter price, you can save the material.
Or You can manually maintain the price for Material in t-code MR21 as zero.
Regards,
R.Brahmankar

How to un hide Industry type in material Master - mm01

Dear All Experts
Kindly help to unhide Industry Type field in Material Master .
Regards
Alok

Edited by: Sridhar Jayavarapu on Aug 4, 2011 5:17 PM

Material Master : MM01, MM01

When I create a material , system is asking moving avg price, std price (Accounting 1 view). It is mandatory. In some cases I want to maintain price as zero which system is not allowing. How to make system to accept proce as zero for a material.

Hi,
Follow the below steps.
1) OMS2 double click on material type Note down field reference eg.ROH
2) IMG- Logistics general-MM-Field selection-Maintain field selection for data screens
3) In field reference tab search for ROH and double click on it.
4) Search no 37(MAV Field) Here make optional entry.
Arun

Problem with BAPI of Material Master creation

Hi,
I am creating material master(mm01) through BAPI_MATERIAL_SAVEDATA.
Program is working fine but when i m checking in MM03 to display uploaded data through BAPI, i cant able to see material which i created to through BAPI but i can see in MARA table.
i dont know wht is the problem ?
can anybody let me know abt this ?

then u are not committing the work.
flow will be like this
call ' BAPI'
if return[] is initial.
commit work.
else.
endif.
Regards
peram

BAPI for Material master update

Hello,
I need to upload and change data to the classification screen of Material master (MM01/02). I am thinking of using BAPI_CHARACT_CREATE and BAPI_CHARACT_CHANGE. Can we use BAPI_MATERIAL_SAVEDATA to upload and change characteristic data for material master(MM01/02)?
Can anybody provide me some sample code for mass upload and mass change of characteristic data to material master?
Thanks in advance
Rajesh.

Hi Rajesh,
You can use standard SAP program <b>RCCLBI03</b> to do mass upload.
Please check the program documentation for more information.
Also you can take a look this BAPI/FM.
<b>BAPI_OBJCL_CREATE
BAPI_OBJCL_CHANGE
CLVF_INSERT_AUSP
CLVF_UPDATE_AUSP
CLVF_VB_INSERT_CLASSIFICATION</b>
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

Material master MM01

Similar Messages

Maybe you are looking for