Material Master Quality certificate

Hi,
QM is active for a material. And quality certificate type is assgined in material master for a plant.
I created a PO and then GR. During GR, it is asking to select Yes/No for certificate. Until this is fine.
Now this material does not require any certificate, and material master has been changed accordingly.
As per the material master, it should not ask for Certification at the time of GR.
I created a fresh new PO and trying to post GR.
It is still asking to select Yes/No for certificate.
Did i miss anything else. Is certificate type is assigned in any other place.
Please advise.

Hello,
Please check if the Profile assignment to the material is deleted.
1.Choose Logistics  ->Quality management ->Quality certificate -> Output -> Certificate profile -> Assignment -> Change.
A dialog box with key combinations appears. In the background you see that the default assignment type (condition type) is QCA1.
2.Select one of the key combinations and then choose Continue.
A screen for entering selection criteria appears. The selection criteria are dependent on the key combination you selected.
3.Enter a key date (proposal: current date) and, if necessary, selection criteria on the selection screen. Then choose Execute.
A list appears with all the assignments that correspond to your chosen key date and selection criteria. Object data, such as the material number, is displayed along with the certificate profile, certificate type, and version.
4.To delete the assignment, select the line with the assignment and then choose Edit -> Delete.
Confirm that you want to delete the line.
5.Save the change that you made to the assignments.
After the assignment is deleted,Change the material accordingly in Quality Management tab.
Hope the information was useful
Regards
Swetha

Similar Messages

  • Material master settings -- GR , Bipass PO

    Hi,
    Certain fields like QA control key i want to change in material master,  accordingly certificate type should be asked in MIGO. not based on PO field settings. is it possible.

    Hi,
    You can specify which certificate type is required in material master Quality Management view and the system will ask during PO whether a certificate is received or not.This is based on material master settings only.The control key should be in such a way that it needs to support certificates.
    Regards
    Sreenath

  • Payment block if material is quality stock(MM &QM)

    Hi Group,
       My client requirement is like
         While receiving material against a purchase order   to quality stock , the vendor payment should be block(it will not allow for payment or posting invoice). One more thing QM module is not implemented in this client.Is there any such control in MM or any moment type by which we can block payment for the vendor while receiving material.
    Thanks
    sp sahu

    Hi
    First let me know, if QM is not implemented, how stock is moving out from QI to Unrestricted?
    You can use QM Procurement key in material master Quality View. There may be standard procurment key (0007 - Delivery release and Invoice block). Otherwise you have your own key and assign it in Material master, quality view, Then Invoice will beblocked as long as material is lying in QI.
    For this setting, you need not implement whole QM module.
    please check and let me know how it goes.
    regards
    Srinivas

  • Quality Certificate for Outgoing (Delivery)

    Dear QM Gurus,
                Here I am having one scenario where I need to print test certificate for delivery considering inspection characteristics of a finished material and semi finished material at different BOM levels.
    Ex:
    Finished Material :           FERT001
    SemiFinished Materials :  HALB001, HALB002 & HALB003.  
    Raw Materials:                ROH001 and ROH002
    Process: FERT001 produced using  HALB003 Produced using HALB002 produced using HALB003 Produced using ROH001 and ROH002       
         At HALB003 we are going to capture some characteristics and FERT001 I will capture some other characteristics, Now at the time of delivery I want to print both(FERT001 and HALB003) inspection characteristics results in Certificate.
        Except FERT001 for all other materials batch is maintaining(No batch Characteristics) for tracking purpose.
        I tried some standard procedure like assigning both material in quality certificate and all MICs relevant for both materials. Result origin and inspection spec origin as 03 and Material sort no as 2 where i maintained this material in Materials sequence.
       With all the above mentioned settings I tried but I con't able to print the characteristic results of HALB003 in test certificate I can able to get only FERT001 Insp Characteristics only.
      Please help me in getting it done, it is critical requirement for our client.
    Thanks and Regards,
    Krishna Mohan.NSL

    just a idea,
    use batch dervivation to get all HALB char data into FERT batch abd then print the delivery of that batch. try and come back

  • Usage decision without quality certificate

    Hey Gurus,
    While doing MIGO for a particular material the quality certificate was not attached. Now after recording the result when i am doing the usage decision for this material, it is giving error that quality certificate missing. The material document has already been posted. How to make UD in this case?
    Regards,
    Abhishek

    Hi
    1.What is status of the inspection lot: is it CTCM
    Then go to UD screen ( QA11)-->edit --> Confirm receipt certificate
    2.Now second option is go to QC51-->enter purchse order >select certificate/Material>double click->go to Certi Status-->select status 5-filed & Inspected
    Save.
    now take UD
    Regards
    Sujit

  • Creation of quality certificate

    Hi
    can anubody guide regarding flow of mics of both raw materials and finished material into quality certificate
    venkat

    Dear Yadav
    please find the below links for the same
    Link: [quality certificate]
    Link: [Quality certificate]
    Regards
    Gajesh

  • Re: Quality Certificate requirement At MIGO for raw material

    Dear all,
    I have a requirement where I want the system ask for Quality certificate while doing the goods receipt. The system should not allow me to process the transaction-MIGO if certificate is not recieved.
    Please advice
    Regards,
    Vivek Sharma

    Hi Vivek,
    You need to perform following settings.
    Configuration
    Follow the path
    Run trx QCC0->QM in Logistics->QM in Procurement-->Define Control Keys.
    Here create your own control key
    Where you can set the rest data as per your requirement but for to check the check box for "Cert Required" is must be activated to meet the requirement relevant to this thread.
    Save
    Say you have configured your Control Key ZZ01
    Now just below this one small configuration is mandatory is Run trx QCC0->QM in Logistics->QM in Procurement-->Define Keys for Certificate Processing
    Maintain Description
    Execute it and go to "Define Certificate Types"
    Here either for your relevant certification type or  for new type (if you wish to create new), maintain the data as below
    "Certificate Required for Each Purchase Order Item" ==== Active
    "Certif. per GR Item" ==== Active
    "Certif. check required" ==== Active
    "Control W/O Certif." Set any error message, I would suggest to select "Without lot error message, with lot error message"
    "Enhanced cert. processing" ==== Don't Activate
    "No certif. confirmation at GR" ==== Don't Activate
    The rest settings are not important to maintain so leave them blank.
    At Master Level
    In QM view of MM for the material maintain "QM Control Key" that just created "ZZ01"
    and the certificate type that is just created or amended. under the procurement data.
    Maintain Q-Info record for Material - Vendor - Plant combination (QI01)
    Now as per your requirement system will ask for the confirmation for certificate receipt as Yes/No. under the Purchase Order data in MIGO at item level data.
    If you select "NO" to it it will not allow to post the GR.
    I hope this is what you were looking for.
    Regards,
    Shyamal

  • Combining Master inspection charac. of HALB & FERT in a Quality Certificate

    Dear Experts,
    material A (halb) with Inspection Plan1 produced  material B (fert) with inspection plan 2. Some of the Master Inspection Characteristics maintained in inspection plan 1 are not in inspection plan 2. I intend to create a Quality Certificate for material B (fert). How do i pick some charateristics from insp plan 1 (which is assigned to halb material A)  to display in addition to charateristics from insp plan 2 (assigned to fert material B). Characeristics from fert diplays in my Quality Cert, but how do i incorporate characteristics from the halb?

    You do this in the certificate profile.  Click on the button on the menu bar labelled "Materials".  In here you define what materials the system should look for to find the relevant batches or inspection lots.
    For this functionality to work, you must have the batch where used functionality set up.  I recommend having the batch where used list update in real-time rather then in batch.
    FF

  • Inspection setup in view quality management update in material master

    Hi all,
    We are using BAPI_MATERIAL_SAVEDATA for our material master updation.
    Here one  of the change in the program is to update the inspection setup in the view quality management.
    Can anybody tell in which stucture of the bapi BAPI_MATERIAL_SAVEDATA  i can pass the values of the inspection set up fields.If not is there any other bapi through which can be done?
    Thanks in advance.
    regards
    Nazmul

    Hi,
    To deactivate the Inspection Types for materials, you can use transaction QA08.
    Here use tab "Deactivate insp. type" and specify the inspection type which you want to dactivate.

  • Quality Certificate -SPRO & Master Data Requirements

    Hello Friends
    I have a query On the QM module , Not  sure if this is the correct forum . In case it is not , Please  suggest me where this should be posted
    Query
    I have to set up the QM processes for a new plant .  Quality certificates needs to be Printed for Batch (QC22 ) & Delivery (QC20)
    Can you please let me know what are the mandatory  Customization & Master Data settings to achieve the above
    Your help & advice will be Really Appreciated
    Thanks in advance

    Dear Sathibabu,
    Plz post ur query QM module
    just check the below link, where u can post ur query
    [SAP ERP Operations - Quality Management (SAP QM);
    Regards
    kumar

  • Link between Material code, Customer & Certificate Profile (Quality)

    Hi All
    I develop one smart form for quality certificate.
    But I am not able to find out the link between Material, Customer & Certificate profile.
    In which table these all data are storing.
    On the basis of above condition MIC will print on Quality certificate.
    Regards
    ARK

    It should be posted in QM forum, isn't it?  Anyway, try this.
    First you get the profile schema in table T683 (configuration of profile schema in Quality Management -> Quality certificates -> Certification Profile -> Profile determination -> Define schema for profile determination).  Standard one is QC0001.
    Then you use function call V61I_CERT_PROFILE_FINDING with parameter (standard routine for finding certificate profile.  Unless you have the user exit, this routine should work):
    I_APPLICATION = QC
    I_DATE = current date or whatever date (i.e., delivery date in outbound delivery)
    I_DIALOG = leave blank
    I_HEADER_COMMUNICATION => here you can put in your customer, material, plant ; depend on your access sequence
    I_SCHEME = value from table T683
    You will get the output in table E_KONDI which give you data of condition rec. no, certification type, profile and version.
    Then you can use certification type, profile and version to select the characteristics from QCVM.
    Hope it helps.

  • Problem in configuration of material master

    Dear cons
    I want to make  quality management control key field is a required field in material master. so in T-code-
    OMSR I selected field selection group-99.& make it as a required field.At the time of creating material master  the system activated other field like certificate type & target QM system as required field along with QM CONTROL KEY.How can we make it only QM CONTROL KEY as a required not other.
    nrk

    THe field name for certificate type is QZGTP... Selct the right arrow in the transaction OMSR and make it as optional in MM01..
    Hope this helps..
    In a similar way try to do for Target system...QSSYS... make it as optional or hidden for MM01..
    Hope it will silve ur problem...
    karthick

  • Upload vendor quality certificate to inspection lot

    Hello,
    I want to know the procedure to upload the vendor certificate to inspection lot in detail.
    I have gone throught SAP library but didn't get much out of it.
    Please explain me step by step process.
    Mimiri

    Refer to SAP help portal about quality certificate for goods receipt
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/90/cff086e36711d1954300a0c930e04c/content.htm
    In the material master
    -'QM in procurement' is active
    -A control key with certificate requirement is set
    -A certificate type is specified
    You can upload the vendor certificate to inspection lot through transaction QC51.
    Regards
    Luke

  • SAP standards for retriving the Material Master Data

    Can someone provide me list of all SAP standards for retriving the Material Master Data with respect to views.
    Standard Reports
    Function Modules
    RFC's
    BAPI's.
    T.codes
    Sample code's
    useful answers will surely be awarded.
    Regards
    Vinayak

    Hi,
    These are the standard BAPI's for Material master.
    BAPI_MATERIAL_DELETE Flag Material for Deletion
    BAPI_MATERIAL_DISPLAY Display Material
    BAPI_MATERIAL_EDIT Change Material
    BAPI_RETAILMATERIAL_CREATE Create Material
    BAPI_RETAILMATERIAL_DELETE Discontinue Material
    BAPI_STANDARDMATERIAL_CREATE Create/Extend Material
    BAPI_MATERIAL_SAVEREPLICA BAPI for Mass Maintenance of Material Data
    BAPI_MATERIAL_SAVEDATA Create and Change Material Master Data
    BAPI_MATERIAL_EXISTENCECHECK Check Existence of Material
    BAPI_MATERIAL_GETBATCHCERT Create Quality Certificate for Batch in Portable Document Format (PDF)
    BAPI_MATERIAL_GETBATCHES Create Batch List for a Material
    BAPI_MATERIAL_GETCHARMERCHHIER Supply Characteristics of Retail Material for Material Group Hierarchy
    BAPI_MATERIAL_GETINTNUMBER Assign New Internal Numbers for a Material Type
    BAPI_MATERIAL_GETINTNUMBERRET Assign New Internal Numbers for a Material Type for Retail Materials
    BAPI_MATERIAL_GETLIST Supply List of Materials for Search Criteria Transferred
    Thanks.,

  • Settings for Quality Certificates generation

    Hello All,
    I am a new entrant in the forum.  I need your help on quality certificates.
    What are the settings necessary for generating Quality certificates in SAP?
    Sravan

    Hi,
    For quality Certificate
    In material master QM view Should have to assgn the QM Control Key which controls the Certification and also assign the certificate Type.
    Create Certificate profile (Tcode QC01),
    Here For which Inspection type you want to create the certificate assign the Origin and type of inspection.
    Assign the layout set (with ABAP er's help Required form to be created and assign the name here)
    By default QM_QCERT_01
    After creation of profile assign this profile to material/materialand customer com bi
    Regrds
    Praveen

Maybe you are looking for