Material Master transfer by CRM middleware

Cannot able to transfer material from R/3 to SRM,
want to know whether system names are specified separately in the CRM middleware config.
what are the basic settings to be done in the this component

You can add these fields in your reduced message type /SAPSLL/MATMAS_SLL ( created with reference to MATMAS ) type that you would have created to send the Produc master data to GTS .
GTS Plugin - Basic Settings ---Activate change pointer for reduced Message type.
Once you include these field in your reduce message type correcpondinf entry has to be maintaine in table TBD62 so that changes to these fields can go to GTS , you can use Tcode BD52 to maintain the entry in TBD62
Hope this helps.
Kind Regards,
Sameer

Similar Messages

Why SAP SRM material replication happens through CRM middleware?

Can some one help me to understand, Why SAP SRM material replication happens through CRM middleware? Is there any functional/Technical reason behind this design?

Dear Sridhar,
SRM releases later SRM 4.0 are working with the same middleware implementation,
there where no changes between the releases. The SRM middleware implementation
was decoupled from the CRM middleware development at that time.
(Middleware is based on the basis functionality of queued Remote Function Calls qRFC)
Regards
Laszlo

Using the APD to update material master in CRM

Does anybody know if it is possible to update material master records in CRM from BW using the Analyses Process Designer with target CRM?
I would prefer to know this before creating a custom data target adapter in the CRM SPRO, writing all the required function modules and then finding out that it does not work.
Thanks,
József.

Which direction??
Inbound/Outbound
Inbound : IDOC_INPUT_MATMAS01

ALE IDOC - Material Master

Hi,
I have triggered Idocs for material master changes.
For some materials, the material description is blank in idocs,however; we have the material description data in SAP.
I have checked the changes in material master, the changes made for material description also on the respective date.
Plesae let me know the cause of sending the material changed record with the description as blank.
Please consider it as a priority basis and help me.
Regards,
Usha.
Edited by: Usha Rani Achana on Apr 22, 2010 10:18 AM

>
Usha Rani Achana wrote:
> Hi,
>
> I have triggered Idocs for material master changes.
> For some materials, the material description is blank in idocs,however; we have the material description data in SAP.
>
> I have checked the changes in material master, the changes made for material description also on the respective date.
>
> Plesae let me know the cause of sending the material changed record with the description as blank.
>
> Please consider it as a priority basis and help me.
>
>
> Regards,
> Usha.
>
> Edited by: Usha Rani Achana on Apr 22, 2010 10:18 AM
I have loaded hundredthousands of materials via ALE method and never experienced a loss of material description.
If that would be the case, and you really just using the SAP standard, then you should open a message at SAP.
MAybe you implemented OSS Note 1364357 - Defined language for material master transfer
and then restricted the transfer to a certain language only.

Middleware settings to map CRM Z table fields with ECC material master flds

Hi,
We want to create a Z table in CRM,this table willl have 2 fields External Material Group and Old Material Number.These 2 fields in CRM table are corresponding to same material master (MM03) fields in ECC.The changes to these fields done in ECC material master should be updated in CRM Z table.
I want to understand the middleware settings I need to do in order to map the ECC and CRM fields.
Thanks in advance for your help
Swapnil

Hi Swapnil,
I am new to Middleware, I am also having same requirement , can you please tell me the process how you resolved this thread.
Thanks in advance,
Regards,
Santosh.

How to transfer Material Master data information from ECC to CRM

Hi ,
Changes to the Classification data of Material master for the class type-001 and Custom
ZFIELDS on mara will trigger the Interface functionality. Any changes to the
custom zfields and classes or characteristic values on Material Master must transfer the information from ECC to CRM. By using RFC .
Regards,
Pavan

Hi,
You need to use change pointer to do this. Go to transaction SALE,
expand MODELLING AND IMPLEMENTING...
expand MASTER DATA DIST...
expand REPLICATION OF MODIFIED DATA
You may need to maintain distribution model in SALE.
Cheers.
Reward if useful

CRM Middleware in Material Master replication

Hi All,
Why CRM Middleware is required to replicate Material Master from ECC to SRM whereas the Vendor Master
is replicate with Transaction....could you please explain.
Thanks & Regards
venu

If your CRM system is new then you have to do the initial download of material from ECC to CRM. To do that first download the material customizing object (like category. group etc), from transaction R3AS (CRM side) then download the product/Material.
After do the initial download, activate the change pointer for the material related message type (matmas etc..)from transaction SALE (ECC). And schedule I job to run its on daily basis.
If can check the below link for details
[http://help.sap.com/saphelp_crm52/helpdata/EN/46/57605301a208e7e10000000a114a6b/content.htm]
Thanks
Subhankar
Edited by: Subhankar Garani on Sep 1, 2011 12:21 AM

No Material Master replication from R/3 to CRM

Hallo guys,
i've got no replication of material master, haven't tried any other object except customizing but customizing is triggered from CRM and was replicated fine. Can anybody help me how can i debug the replication process from R/3?
Thanks for your help in advance.

Dmitry,
You first need to determine where your errors are happening?
1. Do you have blocked queues on CRM? If you see a blocked inbound/outbound queue on CRM via SMQ1 or SMQ2, then you can try to rerun the BDOC message in the queue.
2. Is there tax code customizing not downloaded correctly into CRM? This sometimes can hang up your download of materials?
3. Have you looked at SMW01 after the load to see if you have any BDOC's in error, the queues were empty?
4. What is the status of the initial load R3AM1?
I would hold off from debugging until I figure out where in the download process that I am receiving the error. Once I know that fact them I can debug a single download. You will have to set a filter on the material object to a single material and attempt an initial download. When you perform the initial download you will need all queues deregistered on the CRM side, so that you manually execute the BDOC import into CRM.
The last step will require placing a breakpoint into the validation function module for material.
I believe validation function module is: COM_PRODUCT_MAT_VALIDATE. If you have questions along the way of debugging the flow, please reply back and I will try to see if I can answer them. It has been a little while since I had to debug our middleware downloads.
Good Luck,
Stephen

Uploading material master from R/3 to CRM problem

Hi Experts,
I am new to the Middleware
I have downloaded the material master from R/3 to CRM but I am not able to see the downloaded products in CRM.
I have checked the queue of R/3 there is no error.
I even checked the queue of CRM there is no error.
When I see in SMW01 the status is green and
BDoc. Error message is showing Mat. for Initial Download: Function table not supported
Can anybody give me suggestions?
I will reward the points

i have checked the filters
i have down the following settings
Request Name     MATERIAL
Table Name       MARA
Field Name       MATNR
Incl/Excl      Inclusive defined set/array
Option           Greater or equal then (>=Low)
Low              a1(r/3 material no.)
even thin i did not get the result
i have the same error that is
"Mat. for Initial Download: Function table not supported"
help me out it is very urgent

Why we need crm middleware for material replication?

Hi Experts,
Why we need CRM middleware for material replication from ECC to SRM when we can do the vendor replication from ECC to SRM with ABAP report? IS there any technical limitation?
Thanks and regards,
Ranjan

Hello,
Vendors and locations, for example, you can replicate from ECC to SRM using ABAP reports.
However, if you want to replicate the following information, you should use the middleware:
- DNL-CUST-BASIS3 - Basis CRM online
- DNL-CUST-PROD0 - Material number conversions
- DNL-CUST-PROD1 - Product : categories
- DNL_CUST_SRVMAS - Customizing: Service Master
- MATERIAL - R/3 Material Master
- SERVICE_MASTER - R/3 Service Master
Check note 872533. It provides more information.
Regards,
Ricardo

Change of material master during transfer between SRM and R/3

Hi,
I have a question for modifying material master data between R/3 and SRM.
I would like to know if it is possible to change the material number during the transfer. The reason is:
I have 2 R/3 backends and 1 SRM system. The material codes in the 2 R/3 systems are different but some materials having different numbers in R/3 are referring to the same material. I want to see such materials with the same material number. Is it possible to do this with Middleware plus some interruption in between? The "translation" should be bi-directional.
Thanks

Hi,
No probs if the field is not replicated.No idea how to bring that through replication though.
Coming to the Product Search...Although the number of such materials is less...You will have to modify the Product search which will take care of the display of other products as well.
The Std product search(<b>bbph_product</b>) uses the the search help exit "<b>BBP_F4IF_SHLP_EXIT_PRODUCT_GEN</b>".So you need to replace this one with your custom FM.
In your custom FM,you will have to check for the HARMINIZED code field for all such materials and accordingly while selecting the Material select the HARMONIZED code as the Material number and in the Product search display that HARMONIZED code as the "PRODUCT ID". Also,you will have to develop RFC enabled FM which will actually fetch all the Materials from the BAckend at runtime. Also are you displaying the Product List Plantwise?
Pls give me ur mail ID where i can mail you the sample code.
BR,
Disha.
Pls reward points for helpful answers.

SRM 7.0 - CRM middleware settigns for material replication

Hello SRM Guru's
Can you please provide me detail step by step process of CRM middleware settings for material replication from ECC 6.0 SRM 7.0?
Thanks.
Regards,
Magesh.

Hi,
Configuration Guides are available in SAP Solution Manager Server. Downloaded offline version is also available in SAP Service Marketplace. http://service.sap.com/srm-inst
Please check a good blog by Marcin Gajewski. /people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
SDN has search functions. You can find solutions for your issue.
Regards,
Masa

Replication of Customer and Material master from R/3 to CRM

Hi
Recently in our quality server basis administrator has made a client copy from production server after that customer master and material master are not flowing from R/3 to CRM, even sales orders were not getting copied from CRM to R/3 , i went through C71 BB config document and fixed the sales orders updation from CRM to R/3 but not able to resolve the problem of customer master and material master from ECC to CRM.
I went to B09 BB document and all settings are fine.
Using R3AS I have loaded following objects DNL_CUST_PROD0, PROD1, PROD3, SPROD , DNL_PLANT. and Material.
I went to R3AM1 and checked the status as running or wait for each object.
There are no filters in R3AC1 .
Queue name withR3AD_MATERIA0000000001 has status SYSFAIL in SMQ2 .
What can i do to resolve this problem.
Please advice.
Thanks,
Vaishnavi

Hello Vaishnavi,
After the client copy , have you run txn:BDLS in order to change the LOGSYS in all relevant tables?
You can run this txn in test mode as well to see the affected tables.
Are you getting any dump on these load ?Check it in txn:ST22.
Hope this helps!
Best Regards,
Shanthala Kudva.

Material Master replication ... ECC to CRM

I have a requirement to replicate a material master record from ECC to CRM, based upon an 'external event' (i.e. an event other than the change of the material master record itself, in ECC). The event is the change in status of a record in a z-table.
What is the best way to accomplish this? Is there a function module or BAPI that I can call, to trigger the replication of a material to CRM, whenever this event occurs? Are there other suggested / better approaches to satisfying this requirement?
Your help will be much appreciated!
Thanks,
Duane

If your CRM system is new then you have to do the initial download of material from ECC to CRM. To do that first download the material customizing object (like category. group etc), from transaction R3AS (CRM side) then download the product/Material.
After do the initial download, activate the change pointer for the material related message type (matmas etc..)from transaction SALE (ECC). And schedule I job to run its on daily basis.
If can check the below link for details
[http://help.sap.com/saphelp_crm52/helpdata/EN/46/57605301a208e7e10000000a114a6b/content.htm]
Thanks
Subhankar
Edited by: Subhankar Garani on Sep 1, 2011 12:21 AM

In SOP- transfer forecasted values from material master to info structure?

Hi All,
I wanted to test out a few scenarios. Do you know the answers / can you help simulate and check the below?
1.     If I run the forecast using different models for different materials using the total forecast run (MP38), the forecast values will get updated in the material master. Can I get these values transferred directly into the SOP (standard or flexible), without re-running the forecast in SOP? What I am looking at is a possible scenario where individual materials have different forecast model, so do not want to run forecast from SOP using one model for all.
2.       Can you have the capability of selecting diff model (say based on material master data) in SOP for diff materials? When I ran SOP, the model I specify there for forecasting is applied for all materials
3.       If I upload historical values/forecasted values in the material master, can I directly transfer them to SOP without any change to the value?
Appreaciate your inputs.

Hi All,
I wanted to test out a few scenarios. Do you know the answers / can you help simulate and check the below?
1.     If I run the forecast using different models for different materials using the total forecast run (MP38), the forecast values will get updated in the material master. Can I get these values transferred directly into the SOP (standard or flexible), without re-running the forecast in SOP? What I am looking at is a possible scenario where individual materials have different forecast model, so do not want to run forecast from SOP using one model for all.
2.       Can you have the capability of selecting diff model (say based on material master data) in SOP for diff materials? When I ran SOP, the model I specify there for forecasting is applied for all materials
3.       If I upload historical values/forecasted values in the material master, can I directly transfer them to SOP without any change to the value?
Appreciate your inputs.

Material Master transfer by CRM middleware

Similar Messages

Maybe you are looking for