Material master without valuation class

Hi,
Is it possible to have material master (of different material types) without valuation class?
Also, is it possible to have only one GL account getting reflected for all these materials when we do posting (at the time of Goods receipt) irrespective of material types ?
Regards,
Sid

It is useful in the sense that user do not have to manually do an Account Assignments.
For stock items, valuation class cannot be changed whenever the stock on hand is not zero.
Valuation class are tied to a G/L account.
A change of valuation class means a change of G/L account.
In FI concept, you have to debit and credit to balance the G/L account.  That is why your stock must be zero before the system allows you to changed the valuation class.  If it is not zero, you have to either transfer it to another material or do a dummy issues.  After changing the valuation class, do a reversal entries for the stocks which you have transfer out or you have done a dummy issues

Similar Messages

  • Material type and Valuation class SPRO

    Hi All,
    How to see the the config spro for  materila type  and  valution clss and GL accounts path in SAP
    Please let us know SPRO path for the same.
    Thanks
    Chinna

    MATERIAL TYPE : SPRO-Logistics  General-Material Master-Basic Settings-Material Types : OMS2
    VALUATION CLASS: SPRO-Materials Management-Valuation and Account Assignment-Account Determination-Account Determination Without Wizard- Define Valuation Classes  : OMSK
    VALUATION CLASS  GL ACCOUNT : SPRO-Materials Management-Valuation and Account Assignment-Account Determination-Account Determination Without Wizard-Configure Automatic Postings : OBYC

  • Is it possible to Create Material Master without Profit Center ?

    Hai,
          1) Is it possible to Create Material Master without Profit Center ? 
          2) How SAP System Validate Profit Center in material master. ? is it material Type wise ?
          3) Whether PO Order Creation,GRN & MIRO Possible for those material Master without Profit Center.?
    Kindly Explain me clearly..
    Thanks & Regards,
    Swetha

    Hi,
    Profit center is at the plant level.
    You can create material master even with out a profit center.This field will be there in the costing view and and general sales/plant data.
    while creation of the materila master if do not select these views system will not ask for that.Normally it is pertaining to the costing analysis.
    A profit center manager is held accountable for both revenues, and costs (expenses), and therefore, profits. What this means in terms of managerial responsibilities is that the manager has to drive the sales revenue generating activities which leads to cash inflows and at the same time control the cost (cash outflows) causing activities. This makes the profit center management more challenging than cost centre management. Profit center management is equivalent to running an independent business because a profit center business unit or department is treated as a distinct entity enabling revenues and expenses to be determined and its profitability to be measured.
    Business organizations may be organized in terms of profit centers where the profit center's revenues and expenses are held separate from the main company's in order to determine their profitability. Usually different profit centers are separated for accounting purposes so that the management can follow how much profit each center makes and compare their relative efficiency and profit. Examples of typical profit centers are a store, a sales organization and a consulting organization whose profitability can be measured.
    For more info,please refer
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/cc/36428094f311d2b47a006094b9b0a5/frameset.htm,
    Regards,

  • Change material type and valuation class

    hi
    my client want to change material type and valuation class in their production system. but the material no. and some transaction had done by this material. anything i need to concern? especially, in FI part. thank

    Hey Changing of Material Type is one step
    Changing of valuation class is other
    and underneth that changing of account is another attached to the valuation class.
    The basic requiremnt will be that client want to change the G/L code attached to the valuation class.
    If you have already done some transaction it is not fininacialy right to move valuation classes.
    Tell in detail what is the requiremnt.

  • Tcode MB1B (Transfer Postings) material with different Valuation class

    Hi,
    is it possible to avoide tcoce MB1B for material with different valuation class?
    Materia1 (001000) has valuation class: 3000
    Materia2 (300000) has valuation class: 7900
    I don't want allowed MB1B with Material1 (3000) to Material2 (7900).
    Thanks.
    regards, Dieter

    Hi,
    Yes, It is possible to avoide tcoce MB1B for material with different valuation class.
    Regards
    Md.MahaboobKhan

  • Material revaluation without valuation type

    Hi Experts,
    In material master, materials are extended to valuation types. and we have materials assigned to valuation types as well as not assigned (means valuation type is blank)
    Example as below...
    1000000000     2000     
    1000000000     2000     LSB
    1000000000     2000     N-REC
    1000000000     2000     NORMAL
    1000000000     2000     REC
    Now I want to do a revaluation (MR21) for the material without (1st line of my example) valuation type. How can I do it?
    Thanks

    if your material is split valuated, then  you can do price changes with MR21 only at valuation type level.
    the account data level without valuation type is the so-called header level which is the aggregation of all valuation type levels.
    you cannot change a price information at header level.
    The price at header level  will calculate based on price and quantity at the valuation type levels.
    if there is no stock in any of your valuation types, then you have no chance to manipulate the price at header level with MR21 or MM02.

  • Single table/report for material codes by valuation class

    Hi Gurus,
    One of our customers insists on a basic way to find easiest way to list "material codes" by some "valuation class" values. I know it can be done by cross referencing with different tables but i wonder are there any single transaction that shows material list?
    Thank you all
    Btw, i am newbie here, this is my first message:)
    Regards,
    Mustafa

    Hi
    have you tried MM60
    try it,give plant and material type and execute
    and welcome on SDN
    search before you have any basic questions
    Regards
    kailas ugale
    Edited by: kailasugale on Nov 11, 2011 3:30 PM

  • Material Type to Valuation Class

    Hi
    On which table /Tcode can list the Valuation Class assigned to all the Material Types.
    Regards
    MM

    Hi
    it in not store in single table
    try following
    table-T134 in se16n t-code and give your material type and not down KKREF=account categories reference
    Now  pass account categories reference in table T025,You will valuation class of your material
    Regards
    kailas Ugale

  • MM01 Create New Material Master without Basic view

    Hi,
    The SAP system allow us to create a new material master Purchasing View only (without Basic views). We execute T-code MM01, select Purchasing view only, enter the purchasing view data and save. Material master created with only the Purchasing view.
    We want to control whereby Basic view must be created first before any plant/organisation material views (Sales, purchasing, Accouting etc) can be created. That means user cannot create Purchasing view ONLY if the Basic views is not created, can this be done??
    best regards,

    Hi,
        For most of the standard SAP material types the basic data 1 view is configured as mandatory, but that can be turned off in the configuration. The first place I would look would be in SPRO under 'Logistics - General -> Material Master -> Basic Settings -> Material Types -> Define Attributes of material types'. In this transaction, highlight the material type being used and click on the magnifying glass. The section 'User departments' shows what views can be created for a material. You need to check 'Basic Data' is selected here.
    If that isn't the problem, then I would suggest that you look at the screen sequence and also the field selection configuration for the material type, which you can find under 'Logistics - General -> Material Master -> Configuring the Material Master'. This configuration dictates what fields are shown on the material master and the status of each field, i.e. whether it is mandatory or not.

  • Post material master idoc  with class and characteristic values

    Hi,
    I need to post the class and characterstic values of material while posting the material using idoc of basic type matmas05 . Can anyone suggest me the fields and segment details to fill the class, class type and characteristic values in matmas05.
    Note : the class and characteristic values are already created in the system, my purpose is to assign them to material while creating. so please give me the field and segment details in idoc basic type matmas05.
    thanks
    Kiran

    I  try to do the samething. I see the fields E1CUVAL : CU: Characteristic valuation in the structure of MATMAS05 but when I run the IDOC, these fields never appear even they exist for the material.
    Did you find an answer to your question that can help me?

  • How to get Valuation class in Material master?

    Dear all,
                I want to have valuation class in my report and i want to take is as a material attribute.Actually i have check all the attribute of material master but valuation class is not there. i am having valuation class as a master data as individual . How can i get the valuation type in the Material master?I need it in Material master only.
    Regards,
    Macwan James

    Dear venki,
    To change Valuation class you must have zero stock in the current period, and zero stock at the end of the last period, plus no open PO lines .  flag for deletion all open PO lines,
    Regards
    shankar

  • Procured material - incorrect valuation class

    We are version 4.7 with purchase accounting active in our company.
    Following is the issue faced by us.
    We have a single material code for both procured and manufactured item.
    In the material master the valuation class entered is that of
    manufactured.
    When we create a GR with respective Purchase order (whenever it is
    procured) the accounting entries generated are incorrect. They are
    based on the valuation class entered in the material master (which is
    manufactured) and GL codes are derived from OBYC assignment.
    Kindly suggest how a single material can work for manufactured as well
    as procurement and error in accounting entries generated can be
    rectified.
    Satish

    Hi saravana
    Following the configuration path:
    IMG>Materials Management>Valuation and Account Assignment-->Split Valuation without wizard
    Here we will be assigning the valuation grp to the plant and give the G/L account also
    Check the t.codes .OMWD, ,OMWB where assignment is done. Because of this only the valuation class will come in our MMR ->accounting tab 1
    Regards
    Srinath

  • Valuation class in service master linked with G/L accounts

    Dear Experts,
    In service master what is the significance of Service category & service group? Is it required to assign G/L account like material type is required in material master? Is it necessary to hv 1:1 relationship in  valuation class & G/L account in service master? Is their any way that we can see the G/L account in service master? Pls help to clarify my doubts.
    Regds
    Prashant B.

    Hi Manish
    I assigned valuation class in service master and using same service master for service PO creation, but while doing GR system picks WRX account without valuation class but not the GL account assigned to the valuation class in service master?
    I tried with assigning service group/ material group at PO item over view to same valution class in OMQW but still not able to post to separate GL account in OBYC. Is there anything missing?
    As far as my understanding service PO WRX entries will be posted to the GL account witout valuation class.
    Thanks

  • PGI Should get block - without material cost in material master

    Hi All,
    The scenario is we want to show error message while doing PGI if the material does not have any material cost in material master. How it is possible? Will we able to do with standards?
    Scenario: Material cost is nil in the material master, system should through error message if it do PGI for that material.
    Please let us know to solve it out.
    Thanks and Regards
    Lakshmikanth

    Dear friend
    According to me this should not be SD consultants worry at all
    1.The moving ave price or standard price needs to be mentioned in MMR by MM people depending on the material type and valuation class choosen and whether you are choosing accounting view
    2.Most of the material types which comes for sales like FERT i dont think you can save their Material master records without mentioning either standard price or moving ave price in the accounting view
    (It really surprises me that there is a material available for sale without mentioning either standard price or moving ave price in the accounting view of its master record) ( What i mean is it is already mandatory )
    If not made then in OMS9 you can make it as mandatory
    All these should solve your purpose
    From SD side you can include VPRS condition type in the pricing procedure which will be statistical
    Try changing  that to mandatory and see what is the impact
    I think now at sales order level itself you can control
    Regards
    Raja

  • Entry Aid without Material Master

    Hi Guru's,
    We are in a process of implementation and it was decided that we will used the valuation class linked to material groups instead of material master. I have linked the Material groups to Valuation Class through the  'Entry Aid without Material Master'  and unfortunately I'm not able to Process the Purchase Order.
    Could you please help or advice about the process which needs to be followed to make this solution work without referencing to material master?
    Your help will be appreciated,

    hi,
    Even if you define data there, remember you have to also define material group in the PO as well...Do define short text, account cat, and its additional details...and then check the PO...
    Even if it don't work let me know the error message...
    Regards
    Priyanka.P

Maybe you are looking for