Material Masterdata Loading Error
Hello All,
I am loading Material Masterdata into 0Material_Attr.i have loaded data into PSA successfully. when i tried to move the data from PSA to info object using DTP, i am getting error "Record filtered in advance as error records with the same key exist".
Diagnosis
The existing DTP requires a serialized update because fields are updated
non-commutatively during the processing run (for example, MOVE).
Therefore all new data records that have the same semantic key as
incorrect records that have not yet been corrected in earlier requests
or earlier data packages of the same request, are filtered out after the
extraction in a special step. In this way the system ensures that
incorrect data records are not repeated for your changes, which may not
contain errors themselves.
System Response
The data record is not updated but is written to an error stack.
Procedure
Correct all incorrect data records and update them using an error DTP.
I don't know how to create Error DTP . what is the use of it ? can any body tell me the solution. i am getting this error for 6000 records.
Regards,
Komik Shah
Go to the Update tab in your DTP, check the Handle Duplicate Record Key checkbox, Activate the DTP and re-start it.
To create the error stack, while in the Update tab of the DTP, click on the Creating Error DTPs button. This will create a new DTP for processing the records that have been populated into the error stack.
Edited by: Dennis Scoville on Oct 27, 2009 11:14 AM
Similar Messages
-
Hi all ,
When loading material attributes I am getting the following error
"Value '000000000000000010 ' for characteristic 0MATERIAL is in external
format" shall I have to do any material conversions
?? If so how ?
regards
KKHi,
Please check your datasource 0MATERIAL_ATTR.
Go into change mode and subsequently go to the "Fields"-tab.
Find the line for field "MATNR", then scroll to the right.
Check for column "Convers. Rout". Does it have conversion exit MAT1N assigned to the column for MATNR ?
The same conversion routine should be assigned to the column "SS Conv. Rout".
Also check the value of the column "format", it should be set to "Internal".
Please feed back whether you have found these values and/or what your values are in the corresponding columns.
regards,
Olav -
Material Master Text Load Error
Hello Everyone,
I am trying to load material master text. I am getting a data load error. Here is the error message.
Error Message:; Record filtered in advance as error records with the same key exist.
When i checked the longtext for that error, i got this info.
Diagnosis
The existing DTP requires a serialized update because fields are updated
non-commutatively during the processing run (for example, MOVE).
Therefore all new data records that have the same semantic key as
incorrect records that have not yet been corrected in earlier requests
or earlier data packages of the same request, are filtered out after the
extraction in a special step. In this way the system ensures that
incorrect data records are not repeated for your changes, which may not
contain errors themselves.
System Response
The data record is not updated but is written to an error stack.
Procedure
Correct all incorrect data records and update them using an error DTP.
I did not understand the diagnosis message. If anyone could help me out, that would be helpful.
Thanks,
Lasya.Hi Lasya,
If there are records in error stack and DTP is executed the next time the record keys are compared to the records in the error stack and all records which are listed in the error stack are filtered out and will not be sent to the master data update.
So you have to delete the entire DTP which also deletes the error stack or you have to correct the records in the error stack maintenance and then update the records from the error stack separately via an error stack DTP into the data target.
Regarding to the records in the "error stack", the 'error stack' button in the DTP monitor only shows data related to this request. If you want to view the whole error stack including all requests for a certain DTP, you have to call the error stack from the DTP maintenance.
If you decide to delete the error stack for the DTP. Please make sure you do it from the DTP maintenance and not the DTP equest.
Usually the error stack can be deleted by removing the incorrect requests from the data target. The other possibility is to delete and recreate the whole DTP.
Rgds,
Colum -
COPA Datasource creation and Masterdata loading for characteristics
HI,
I am creating a Costing based COPA datasource for client requirement.
There are fileds from
Characteristics from the segment level:
Currency type PALEDGER
Fiscal Year GJAHR
Period/year PERIO
Plan/Act. Indicator PLIKZ
Record Type VRGAR
Version VERSI
*Characteristics from the segment table:
Company Code BUKRS
Billing Type FKART
Brand KMBRND
Brand EXTWG
Business Area GSBER
CO Area KOKRS
Category WW010
Country LAND1
Customer KNDNR
Customer group KDGRP
Distr. Channel VTWEG
Division SPART
Material Group MATKL
Not Used-Level4 WW040
Plant WERKS
Prod.hierarchy PRODH
Product ARTNR
Product hierarchy WW050
Profit Center PRCTR
Sales Group KMVKGR
Sales Office KMVKBU
Sales Ord. Item KDPOS
Sales Order KAUFN
Sales Org. VKORG
Sales district BZIRK
Sales employee KMVTNR
Sub Group WW020
Sub Sub Group WW030
Vol. rebate grp BONUS
Characteristics from the line items:
Record Currency REC_WAERS
Billing Date FADAT
Canceled doc. STO_BELNR
Canceled item STO_POSNR
Cost Element KSTAR
Cost Object KSTRG
Document number BELNR
Goods Issue WADAT
Item number POSNR
Order RKAUFNR
Partner PC PPRCTR
Posting date BUDAT
Ref.doc.number RBELN
Reference item RPOSN
Sender BProc PRZNR
Sender cost ctr SKOST
WBS Element PSPNR
Value fields:
Administration Costs KWGOHD
Bonuses KWBONI
Customer Discount KWKDRB
Direct mat. costs KWMAEK
FOB Charges VV020
Freight KWFRGR
Gross sales KWBRUM
Insurance KWINSR
Miscellaneous chargs VV030
Other Charges VV010
Other Discounts RABAT
Other overhead KWSGEK
PAL/Packing charges VV040
Revenue ERLOS
Sales costs KWSOHD
Sales quantity ABSMG
Stock Value VRPRS
Calculated Key Figures from the Key Figure Scheme:
Sales unit COPASLQTU
Sales quantity COPASLQTY
Revenue COPAREVEN
Cust. discnt COPACDSCN
Base on the above characteristic fields how can i consider the infoobjects from BW to laod masterdata.
Do i need to consider the base tables for characteristics and for value fileds apart from CE1XXX,CE2XX,CE3XXX,CE4XXX tables.
Please give me your ideas on this.
Thanks,
SatyaHi Durgesh,
Thanks for your response,
Data is coming perfectly in RSA3 for COPA datasource.
There is a confusion while reconciling the data with ECC system.(transaction KE24).
Functional consultant has reconcile one transaction with a reference document number and with certain currency type(Company code currency/Operating concern currency).
But still i confuse with the Masterdata Loading.
Because masterdata attribute fileds are taking directly from the operating concern in COPA which is normally won't happen with the other scenario.
(Say for CUSTOMER attribute are CUSTOMER GROUP and COUNTRY, In COPA scenario these are directly available in operating concern which will be available for datasource.But for other scenarios for CUSTOMER GROUP and COUNTRY fill with the CUSTOMER attributes hence my idea is whether we need to load masterdata in BI or not.)
Please give your valuable o/p.
Thanks,
Satya -
Getting Page Load Error while opening a Opportunity in new window
Hi All,
outbound SSO is enabled.
when i try to punch-in to my application from CRM through opportunity web link with Web Link Target as "open in custom tab" its working properly, but when i have Web Link Target as "open in new window" i am getting page load error. previously with out Outbounf SSO it is working properly.
Do i need enable any settings in CRM
thankswhen the web link target is "open in new window" or "open in current window" the request send to third party application from CRM ONDemand is HTTPS request as SSL is not enabled it is giving "page load error"(In the web link we are specifying http only) (User athentication type is "username & password/ SSO")
Is there any setting in CRM Ondemand to send Http request only instead of HTTPS? -
Error building project using kXML2 - "Class loading error: Wrong name"
Hi,
I'm testing the XML-Parser KXML2 and downloaded the latest package, but the minimal version (kxml2-min.zip). I put this file into the directory "%j2mewtk%\apps\KxmlTest\lib" and wrote the lines
import org.kxml2.io.*;
import org.xmlpull.v1.*;
When I try to build the project with the Wireless Toolkit (v1.04) it spits out the following error:
Error preverifying class kxml2.io.KXmlParser
Class loading error: Wrong name
com.sun.kvem.ktools.ExecutionException: Preverifier returned 1
Build failed
I also tried the full package "kxml2.zip" but the same error occurs.
How can I get rid of this? Thanks in advance!Okay, finally worked it out (hopefully). I unpacked the archive to a directory (say "%J2MEWTK%\apps\KxmlTest\tmpclasses") and then preverified them "manually":
%J2SDK%\bin\preverify.exe -classpath "%J2MEWTK%\apps\KxmlTest\tmpclasses";"%J2MEWTK%\lib\midpapi.zip" org.kxml2.io.KXmlParser
%J2SDK%\bin\preverify.exe -classpath "%J2MEWTK%\apps\KxmlTest\tmpclasses";"%J2MEWTK%\lib\midpapi.zip" org.xmlpull.v1.XmlPullParser
%J2SDK%\bin\preverify.exe -classpath "%J2MEWTK%\apps\KxmlTest\tmpclasses";"%J2MEWTK%\lib\midpapi.zip" org.xmlpull.v1.XmlPullParserException
Then I packed them again to a jar-file:
%J2SDK%\bin\jar.exe -cvf kxml2-min.jar %J2MEWTK%\apps\KxmlTest\tmpclasses\output\.
That was all! -
Hi all,
Please help me with this..
I got the following errors while load is running in essbase, I have seen this in log files..
All other cubes loaded successfully, except 1 cube.
ERROR 1054004 - Application is not loaded
ERROR - 1002097 - Unable to load database
The Oracle website shows
Possible solution for 1st error is Make sure that you created the filters correctly.
2nd error is not mentioned there.
Please help me solving this issue.
Cheers
PrashHi,
First of all can you start this database from say EAS, does it say it cannot start?
It might be a hung esssvr.exe process, stop all the databases and if you still see an esssvr.exe process running you may need to end that process unless you can stop it with maxl or esscmd.
If you are unsure how to do it then it might be easier to give the box a reboot.
Cheers
John
http://john-goodwin.blogspot.com/ -
Load error code 11 when attempting to open .vi from library
Hello,
Recently a colleague sent me a .llb containing a VI and sub-VIs of a program needed for my research. The VI opens correctly but none of the sub-VIs can be found by it and when I attempt to open the sub-VIs I get load error code 11: VI version (6.0) cannot be converted to the current Labview verstion (8.5.1) because is has no block diagram.
I am running Vista with 8.5.1 and attempting to open a library of version 6.0. I do not know what OS the library was compiled on. (Linux is a possibility) The colleague who sent me the program does not know either, as he recieved it from another colleague whom he is no longer in contact with.
I am fairly certain the library was saved with block diagrams, so I do not think that is the source of the error.
Does anyone know what might be a way to get these sub-VIs working?Okay,
File posted. Someone please tell me if this has a block diagram on it.
Attachments:
Find First Error.vi 24 KB -
Solution to "Quicktime Plug-in failed to load" error
My solution to "Plug-in failed to load" error message when attempting to watch demo movie on Apple website (and others):
I found two Quick-time plugin.plugin files in my Internet Plug-ins folder in my
User Library folder. One was version 6.3 and one was version 6.5.2.
Removing the 6.3 version solved the problem. Removing the 6.5.2 version had no effect, so I removed it also.
Never could have solved this one without the help of Woody at Apple!!!!Why not install version 7?
-
Stor.e TV+ No Loader error keeps coming up when switching on
I have been experiencing continual problems accessing the hard drive. "No Loader" error message keeps coming up when switching on.
The so-called "solution" to this problem posted on this forum is to open up the box and fiddle with the cables. Whilst I have had some success with this method initially, dismantling the box 10 times a week is not on.
I tried something else in desperation.
When the No Loader message comes up, I switch the box off and on again from the remote.
After 2 or 3 times or so the HDD folder usually appears.
I have been doing this consistently now with great success. This however suggests that the No Loader error message is NOT a mechanical connector problem with the hard drive but (as usual) poor software (what else?).
Dismantling the unit is tantamount to switching it off for an extended period of time so may explain why this technique works.
Switching the unit on and off several times also solves the problem of the D folder not appearing on the network even though Win7 shows Store-TV-Plus as a mapped NTFS drive (but can't find the D folder).
See the similarity?
Another thing that exacerbates problems is the unit's poor ventilation. The first thing that happens with this unit is that the rubbish stick-on rubber feet fall off.
Whilst this may seem innocuous, the ventilation slots are underneath the unit and will be blocked if there are no feet. I live in a hot country so this device gets pretty hot and behaves even more erratically unless well ventilated.
Ideally keep it well away from other units and preferably sit it on a small box by itself with the vents underneath well exposed.
I also still experience problems playing FLAC and MKV files. The unit occasionally loses synch with FLAC files which generally otherwise play OK and locks up or causes loud bangs or white noise on the speakers (dangerous).
Some MKV files just don't play at all even though VLC plays them. There are a myriad other inconsistencies but these are the most annoying.
Is anyone else experiencing these problems or does anyone have any other solutions to prevent these problems?
I don't suppose we can expect another software upgrade from Toshiba? In your dreams, pal.OK, so I took the risk and updated the firmware of my Stor.e TV+ to the Noontec V8S latest firmware V3.0816.13_V8S from noontec website.
The update went fine without a hitch (took about 2 minutes from an old 256MB flash drive plugged into the back USB port of the unit, which I formatted before using), and some of the irritating shortcomings of the Toshiba firmware was solved. Samba worked in some fashion, but I was still not able to download songs directly to the Stor.e over wireless, which is the only other feature I currently need. The irritating remote control buttons were changed to the way any sane person would use them (I had changed my universal remote control to correct this, so would have to change the settings if I kept the updated firmware) The new firmware seems solid, but I DON'T USE THE VIDEO CAPABLITIES, so I can't comment on this.
One major drawback of this update for me is that the small display on the unit becomes much less readable. Seems like there is a problem with the font on the new firmware. I use my Stor.e exclusively as a flac music player, and since I don't have it connected to a tv the small display is crucial for me to select tracks or disks. I have 300+ discs, so the Stor.e is an excellent cheap media player which I connect to my HIFI system via a DAC.
I thus had to change back to the Toshiba firmware to correct this problem. Seems like I would still have to use USB to download music to the Stor.e when I buy new CDs. What a pity.
Incidentally, the new Toshiba firmware is very much like the old firmware, in that it lacks the capability to switch on Samba. In the readme Toshiba states that the new firmware fixes a network problem, but I think that this is probably the smallest issue most users have with the Toshiba firmware.
So, my advice to anyone having video, control or other issues with the Toshiba firmware is to flash to the Noontec firmware to see if it resolves their issues. If it doesn't one can always revert to the official Toshiba firmware as I did.
You do this at your own risk though, if you brick your unit don't blame me... -
I have an iPod Nano v4 or 5 and when I connect it to my Hyundai Santa Fe I get an iPod Loading error message. The cable works with the dealer's iPod which is a newer model. The cable came with the car when I purchased it. Please advise. Thanks.
Hi Bander Bunny!
I have a couple of articles that should be able to help you troubleshoot this issue a little further. You may want to try uninstalling and reinstalling iTunes first. This has to be done in a specific manner, and this article can help you do that:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
Another option is that you may want to try syncing your iPod nano manually. Here's is an article that pertains to manually managing the content of your iPod nano:
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/ht1535
It's also possible that this issue resides with your iPod nano. Here is a website that will help you troubleshoot the iPod nano:
Apple - Support - iPod Troubleshooting Assistants
http://www.apple.com/support/ipod/five_rs/
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
Valuation with material cost estimate: error with product
Hi Experts,
Message no. KE350, Valuation with material cost estimate: error with product "2286940000". Please suggest me to resolve this issue.
Points will be provided for good solution.
Regards,
JayHi Jaya
This means that your customization is wrong then...
In KE4J or KEPC you have assigned costing keys to your material types or some other combination... You should have done this config in a way that costing key is not called for in the case of non valuated materials...
In Ke40 you have defined costing key where in you have specified "Issue error msg if no cost estimate found".. This costing key is assigned in KE4J or KEPC in a way that it is getting called even in case of non valuated materials...
Do you have a separate mat type for non valuated material? If yes, remove this mat type from KE4J/KEPC..
If you dont have separate mat type i.e. in the same mat type if you have both valuated and non valuated, then you have a problem.. You would get stuck in that case
Regards
Ajay M -
Valuation with material cost estimate: error with product "117122"
Hi people,
We have the error:
=====================
Valuation with material cost estimate: error with product "117122"
Diagnosis
In Profitability Analysis (CO-PA), the system tried to valuate a line item using the current standard cost estimate.
In order to determine the current plan period, the system needs to read the valuation segment of the material master.
The system has found that the current plan period is not filled forproduct "117122" in plant "UBE1".
We have the follow configuration in trans.: KE40:
. Determine material cost estimate
. Transf. Standard Cost Estimate
. Costing Variant
. Control Data for Standard Cost Estimate
. Period Indicator = "Current Standard Cost Estimate acc. to entry in mat master
. Addiitonal data CO-PC
. Transfer cost estimate in controlling area currency "activated"
We think the reason about our error is because the field above is activated and some configuration more is necessary for this case. For examplo: Trans.: OKYW and this one was not configurated yet.
Do you know what happend?
If we need to configure some transation, or sonly process the cost estimate?
Thanks,
Rosana.Hello Guido
Thank you very much for your return.
It is happenning in a Client that some people are doing the configuration.
Before we didin't have in KE40, the fiel "Transfer cost estimate in controlling area currency" activated.
And now, the people activate that in this new Client and I don't know the impact about that.
I think we have to make the configuration in OKYW.
The other transation you told me, we don't have any information.
Could you tell me some other idea what happend?
Message error is just "Message no. KE350"
Abou claculate the cost:
It was calculated by trans.: CK11N for future planning and the real wasn't not possible to release because this material already have moviments.
Could you tell us is there is some thing more to do?
Thanks,
Rosana. -
Valuation with material cost estimate: error with product " 200038 "
Hi,
I am getting an error:
Valuation with material cost estimate: error with product " 200038 " (Message KE350).
Kindly assist on the same?If this material is mto material go to t.code KE40 and maintain define access to standard cost estimate define cost key with
"Transfer sales orde cost estimatex".
If it is mts material define costing key with Transfer std cost estimate and in costing data
costing variant : ppc1
costing verstion: 1
period indicator: Release std cost estimate matching with goods issue or material costing matching posting date.
This will resolve ur problem. -
HI everyone,
I have a problem regarding abap program,
I have transported a program with tcode from development server to production server but when i run the program in production server the program gives a runtime error.
" Program Load Error " thus dumping the program.
when i checked it in SE38 of production server it quotes " program does not exiist ".
Can please anyone let me know wat is the reason??
Thank you,
Vivek.Hi vivekacharya,
I think you saved the report and tcode in different Transports Requests, you moved only one request in which the report is not exsist.
so go to se38 program goto utilities --> versions --> version management and then get the request and transport the request to production server.
Regards,
Sateesh
Maybe you are looking for
-
I'm getting "MACHINE_CHECK_EXCEPTION" blue screens
But this is not the same as the other guys :/ this computer is about 3 months old and just started to get this error 2 days ago..."MACHINE_CHECK_EXCEPTION" What the hell does that mean??? I was started a game, went to the track to start racing and
-
How can i download to my itunes music this hard drive??
How can I download y music from a hard drive to my itunes music and playlists?
-
I am experiencing two problems that I am a bit worried about in the long run. Upon disc insertion or deletion, there is a bit of noise that I'm not used to hearing and when this noise is happening at the same time the illuminated keys above the disc
-
When I got my iMac for Christmas this past holiday it seemed dead on arrival. After initial booting it abruptly shut down. Without any options on Christmas day I just tried restarting it multiple times. With out any plausible reason it started to wor
-
SELECTION-SCREEN disable OBLIGATORY
Hi all, at the moment I'm building a selection-screen which, has a radiobutton group with two options. When one radiobutton is been selected, a couple of fields are disabled for input, or could be hidden. What I want to accomplish is to make some of