Material movement from unrestricted use to "waste"

Hello,
we have some materials in stock that are actually good parts, but we will not sell them and pysically throw them away.
So now in SAP they are in unrestricted use and we need to remove them from there.
What movement type can we use? Just to clarify, it is no scrap, so we don't want to use 551 or 551 (Withdrawel from scrapping into unrestricted use), because this will be added to scrap then which it not is.
Any suggestions?
Thanks
Anne

Hi,
Process of scrapping.
Create scrap materials using Material type ABF or a copy of ABF.
If the UOM of Byproducts & Scrap are the same then do a material to material transfer using 309 movements.
Create a sales order, Perform the Delivery & Customer Invoicing.
If the UOM is different then do a goods issue to scrap of By-Product using 551.Perform a 501 movement for scrap material & then perform the Sales order, Delivery & customer Invoicing Process.
If you want to sell scrap material, you can transfer your material type from your material type to material type "waste" or create material with material type waste.
Then the flow of scrap sales:
1)Create a scrap sales order (VA01) F
2) Scrap delivery (VL01N)
3) PGI (VL02n)
4) Performa invoice (F8) or sales Invoice (F2) (VF01) and
5) if excise is applicable for the scrap, then excise invoice (J1iin) after sales invoice.
Regards,
Biju K

Similar Messages

  • Block picking from unrestricted use stock when it is in schd. for delivery

    Dear Experts,
    I have 50 units in unrestricted use stock of particular material for a storage location in the plant.  I have made two outbound deliveries for this material.  When I pick 50 units of this material, these 50 units i can see in schd. for delivery and in unrestricted use stock also I can see 50 units  in MMBE.  Now, 50 units are in unrestricted use stock, once again i will be able to do picking of another 50 units of this material from the same storage location. (there is physical variation in stock.)  Now, when i will do pgi for one outbound delivery, the stock from unrestricted use will be debited and system not allow to do pgi for another outbound delivery.  (we don't want to allong negative stock).  Is there any way to block picking of the stock which are in schd. for delivery.  Thanks in advance.

    Maybe you should set proper availability check for your deliveries / materials.
    SPRO > SD > Basic Functions > Availability Check and Transfer of Requirements > Availability Check > Availability Check with ATP Logic or Against Planning
    Here you can carry out of your setings.
    E.g.
    .. > Carry Out Control For Availability Check (transaction OVZ9)
    Here you should set for proper checking group / checking rule combination > "Include deliveries" (V_441V-VBBLP) field should be set.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/93/744b51546011d1a7020000e829fd11/frameset.htm
    Regards,
    Csaba

  • If I purchase a movie from iTunes using my MacBook Air, can I watch it on any device including my Apple tv?

    If I purchase a movie from iTunes using my MacBook Air, can I watch it on any device including my Apple tv?
    If I purchase using my iPad, can I watch it on my apple tv?
    Does iCloud store my purchases just like it does with my music?

    Thank you i been looking for a  answer to this all day but I couldn't find anything on it! Now I know I will find a file with it! thanks!

  • Unable to purchase tv shows or movies from iTunes using iPhone 5

    I am unable to purchase tv shows or movies via iTunes on iPhone 5 running iOS7. Can purchase songs, have plenty of space available on the device, and no issues purchasing tv shows or movies from iTunes using my computer. Has anyone else had this issue?

    Do you have the appropriate TV shows / Music Playlists checked in the corresponding tabs on the iPhone?

  • Material movement from Quality to Unrestricted

    Dear All
       My problem is that i have given UD for a particular batch and posted the stock from quality inspection to unrestricted use.
    But when i see in the stock overview the quantity still lies in Quality i.e in MMBE
    But when i see in QA33 the stock is available in Unrestricted.
    Kindly give me a solution
    Regards
    Surender

    Dear,
    Use movement 321 to move material from QI to unrestricted and movement 343 from blocked to unrestricted.
    Regards,
    R.Brahmankar

  • How do you you get sound to TV when showing a movie from Netflicks using HDMI

    When I'm looking at a movie downloaded from Netflicks using the new HDMI cable from my MacBook Pro, the picture shows fine, but the sound stays with the computer. How do you get the sound from MacBook to HDTV?

    to: MartinR
    Thanks for the response. Here's the answers to your questions. I have a new MacBook Pro with Retnia display (13") late 2012 model, so it's solid state, love the unit, maybe my 10th Mac/Apple. It comes with a HDMI outlet, so I bought a 6' HDMI 19 pin cable. The TV is a new Vizio 39" that has a side mount HDMI imput plug. I tried it through this and through the main HDMI by removing the Comcast box. Both work the same, excellent HD projection, no sound. I even tried using a jack from the headphone outlet to the red and white sound imputs on the TV and that won't add sound. So that doesn't seem to be the solution. I ended up using an iPod portable sound system, but the whole thing is a lot of wires and junk to watch a movie. I thought maybe there is something I need to turn on first. I was just sure the sound should be carried on the HDMI cable and not need seperate output leads.

  • Streaming a movie from Flixster & using Bluetooth speakers, my wi-fi connection keeps dropping

    When streaming a movie from Flixster and using Bluetooth speakers, my wi-fi connection keeps dropping, like every 2 seconds! Anyone have any suggestions on how to rectify this issue?  In fact, I don't even have to be streaming the movie. When I was in settings and went to connect to the speakers, I could see the wireless connection dropping, then restarting!

    5.0.0.1036 is fairly recent, but there is a later update to 5.0.0.1067
    See the link below for the download, and follow these simple installation instructions.
    Do a backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion.
    1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
    https://www.blackberry.com/Downloads/entry.do?code=577BCC914F9E55D5E4E4F82F9F00E7D4
    2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
    3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Moving a Lot back from unrestricted use to quality inspection

    Hi experts
    I made GR and qulaity inspection lot is created and I made a user decision ater released it and the stock is posted to unrestricted use.
    Due to manual error I need to cancel the material document and the invoice captured for that lot using MIGO t.code.
    So i went to MIGO Selected cancellation with material document, I have given doc number and pressed enter. It is not allowing me cancel the material doc instead it throughing an error "You cannot cancel GR, since inspection lot is already partly posted"
    How to proceed with this?  pls help
    regards
    K.R.Srinivasan

    Hello Srinivasan,
    if you have made the UD and completed the stock posting SAP recommends that you create a bseperate return delivery for the stock (Not nice, but standard).
    You could however try the following notes:
    [175842|https://websmp205.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=175842&_NLANG=E] describes how to reverse material documents created by the UD
    [33924|https://websmp205.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=33924&_NLANG=E] describes how to reverse the UD code
    Then you can try to make the UD and return the stock.
    Please note the exceptions in note 175842 concerning the reversal of stock postings.
    Regards,
    Isabelle

  • Import Movies from Hi8 using USB

    Is there any way to import movies from a video Hi* camera using a USB cable? The camera does not have a firewire connection.

    hey there Dave, welcome to Discussions.
    you'll need to get an analog to digital video convertor that outputs a signal over firewire. see these:
    manufacturers
    http://www.canopus.us/US/products/Index/product_index.asp
    http://www.datavideo.us/products/dvformatconverters.htm
    stores
    http://www.bhphotovideo.com:80/bnh/controller/home/
    http://www.markertek.com/
    http://www.bwayphoto.com/Default.asp?&l=broadwayphoto
    good luck.

  • I retned a movie from Itunes using my I phone; however, I can't see the movie listed under videos, nor does it appear in my I tunes library on my laptop.  on my itunes store app, there is a "1" inside the red dot that is blinking.

    I rented a movie from Itunes on my Iphone; however, i can't find where to watch or view it.  The movie does not show up in my videos or movies yet ther is a blinking "1" in the red dot on my Itunes app on the bottom right of the screen over the "more" tab? any ideas on how to get to the movie?

    ah, ok yes i did do that last night. I just did it again and relized that ther is a "Downloads" tab. I selected it and stated that there was a download error. I'm currently retrying it now. and it is now showing in my videos.
    thanks for helping me focus a little more to get where I need to be.

  • Why I cant download movies from itunes using 3g?

    I am trying to download some series from itunes using 3g but its not working only when I use wifi. The same happens with games from apple store. Is there any limit of size to use 3g?

    If you are trying to download on 3G it is just to slow. And some Apps will not download  at all with 3G, they just sit in the "waiting stage".

  • Movement type from unrestricted use to particular storage location

    Hi ,
    I have situation wherein the stock was goods receipted with referendce to  a PO into unrestricted stock (without mentioning storage location).
    I now want to transfer this stock to a particular storage location.
    Please let me know how to do this,
    Regards,
    Vinayak

    Hi,
    How can you receive a material without mentioning the storage location in MIGO (101), it is not possible as per standard system.
    Please check the PO, It must be created with account assignment that means it was consumed at the time of GR, that is the reason you do not need to enter storage location at MIGO
    So if you need that material in storage location cancel that GR, change that PO receive again in desired Store

  • Movement type 671 (copy) to blocked stock instead of unrestricted use

    Hello,
    I want to post the stock from a return delivery (created with reference to return line of a stock transport order) to blocked stock instead of unrestricted use stock.
    Standard SAP uses delivery item category NLRN (Return StockTransItm) and movement type 671 (TR to stock in transit).
    I want to do the same thing that movement type 671 does but post the GR to blocked stock.
    Any ideas,
    Best regards,
    Dominik

    Dear ,
    Normally the process for intercompany 'return' stock transfer is as               
    follows:                                                                               
    1) Create an intercompany stock transfer order with flag 'Return'                 
       (transaction ME21) or an item with the return flag (field RETPO)                                                                               
    2) Create a delivery with VL10B (or VL04)                                         
    Cross-company, delivery type NCR, item category NCRN                              
    Intra company, delivery type  NLR, item category NLRN                                                                               
    The delivery type will be assigned via Customizing IMG -> Materials               
    Management -> Purchasing -> Purchase Order -> Returns Order -> Store              
    Return                                                                               
    3) Create with the transaction MIGO a goods receipt from the receiving               
       plant (the plant that created the NB purchase order for return -                  
       therfore the quantity is negative) with movement type 101                         
       (this step is only necessary with the two-step procedure).                        
       The goods receipt will NOT be created with reference to the delivery,             
       that means, that the returns delivery will not be updated. In                     
       the system posts a goods issue with reference to the                              
       returns purchase order that is the system converts                                
       the movement type due to the returns indicator.                                   
       Cross company   161                                                               
       Intra company   161                                                               
       If the one-step procedure is used, step 3 needs not to be performed,              
       automatically posts the negative goods receipt when performing step 4             
       The quantity is then transferred to the transit stock.                                                                               
    4) Posting of goods issue via the delivery; Button 'Goods issue' -      
       starting with 4.6 the button is changed to 'Goods receipt'.                                                                               
    In background a goods receipt is performed                                                                               
    Cross company                                                        
       Two step procedure 673                                               
       One step procedure 675 (step 3 with mov.type 161 is automatically    
       posted)                                                                               
    Intracompany                                                         
       Two step procedure 671                                               
       One step procedure 677 (step 3 with mov.type 161 is automatically    
       automatically posted)                                                                               
    5) Create a credit for it                                                  
    6) and check this credit.                                                                               
    In the standard it is not foreseen that the returns of cross-company       
    stock transport orders arrive a blocked returns stock. As you found,       
    in Note 430074, the relevant movement types for this process are 671,673   
    675 and 677. As indicated in the documentation you have, these movement    
    types transfer returns into unrestricted-use stock. Therefore, if you      
    wish to place these particular returns in blocked stock, you will need     
    to perform another movement from unrestricted-use stock once the return    
    has been received as such.                                                                               
    I am sorry I can not provide a more satisfactory solution.

  • (Usage Decision )Stock Post To Unrestricted Use.

    Dear QM Expert,
    I create a inspection lot of Finished Good and inspection type is 04 used when take a decision in QA11 then the Inspection lot is not open and the message has shown.
    <b>The function you selected
    cannot be
    carried out:
    Access usage decision</b>
    When i use QA12 then message show is this,
    <b>You cannot perform this task because the usage decision has not been made yet.</b>
    But the stock is not posted To unrestricted use.
    I want to stock post or cancel the document but i cant cancel or reverse the document.
    Please suggest me the urgent bases what i do for stock post to unrestricted use.
    Once problem has been mentioned here that the logistic period has been closed and FI/CO period will be close after six days.
    thanks
    ufarooq
    Message was edited by:
            Shahzad Sami

    Hi,
    Follow these steps for the qm inspn procurement.
    1.Create Material Master Record with QM View.
    2.Activate QM Proc/ Specify Control Key 0001.
    3. choose Inspn set up and inspn type to be entered as 01 and set the active indicator.
    4. Create Q-info record with material / vendor.(qi01)
    5. Enter the release by date as 31.12.9999
    7.Create inspn plan(qp01) with usage 5 and status 4and enter the control key as PPQM.
    8.Choose the operation and assign the inspn characteristic / sampling procedure
    9.MD61/MD02/MD04
    10 Convert the Purchase requisition as Purchase Order.
    11. Receive the Material against the PO.
    12. In MIGO against PO receive the material.
    13.QM lot will be created
    14.qa02 check inspn plan / sample.
    15.qe51n results recording
        lot origin 01 mat no and execute results
    16.qa11 ud code select accept and chooseinspn tab page and type the qty to be proposed and save.
    17.stock will move to unrestricted use .
    Regards,
    nandha

  • Stock Reversal - From Unrestricted to Quality

    Hi All,
    Our scenario is as follows,
    Inspection takes place for a Inward material (101). Once the UD is given stock is moved from Quality Inspection to Un restricted.
    Then the Raw Material is issued to Production. Some defects are observed at production Stage and they are returning it to Quality. How this can be done in SAP. I have tried to Transfer Posting (321 to 323), System says, as the Material is activated for QM Inspection, this is not possible.
    Pease guide me, how to move the Material back from Unrestricted to Quality Inspection.
    Regards
    Sam

    Hello,
    You can choose a line rejection process for this. Please activate 08 inspection type for the material.
    First pls do 344 movement type (MB1B)  and post the material from unrestricted to block.
    Then do 349 movement type for posting the material to quality from Block.
    Lot will get created and you can reject the material by giving the UD and posting it to return delivery.
    Please make sure that quality is active for 349 movement type in SPRO > Inspection for good movement.
    Please revert back for any more doubts.
    Regards
    gajesh

Maybe you are looking for

  • Unknown error -50 in Store ?

    Hello, I'm working in a radio company and I installed iTunes 7 in my pc but doesn't work correctly. I have a problem in my iTunes Store: "unknown error -50". Therefore I can't buy anything in the store. The search is ok! At home everything is ok. Whe

  • Set Field in IDOC-Segment mandantory?

    Hi everybody, is it possible to mark IDOC-fields in a segment in R/3 as mandantory. I cant see any options in WE31. Thanks Regards Mario

  • IPhone 4 Video Mode image is larger than camera mode. Normal or Bad?

    Hey there, im using an iphone 4 White. I start to browse through my device. But something caught my eyes. Which is the video Mode. So this how it goes, when i view my device in camera mode everything is normal. But i switch to video mode, the image b

  • Cant rewire reason 5 to Logic 9 after Mavericks update

    Hi there, I am using Logic Pro 9.1.8 and Reason 5 and was having no trouble rewiring Reason to Logic untill I updated to Mavericks OS, after which Reason simply doesn't rewire to Logic anymore. I tried running Logic in 32 bit as well as 64 bit mode b

  • Superuser Workflow not working

    If you look at the Super User Access request 657 it is not assigned to FF owner. It is taking Escape_Path and getting assigned to GRAC security. How can we assign it to the FF Owner.