Material not maintained by purchasing : error in purchase requisition

Dear Experts ,
I have created a new material of material type ZSPR where the purchasing view is already extended. I can see
the purchasing view after selecting the plant in the material master. But when trying to add the line item in
Purchase requisition for this material ,then i am getting message "Material xxxxxxxxxxxx not maintained by
purchasing".
when I go the material master & click on the purchasing view , message in bottom is shown with tick in green
round background "No plant-specific data exists"
I have created hundreds of materials in past 10 days , but this problem comes only for 3 to 4 materials.
Kindly advise how to resolve.
Thanks in advance.
Regards,
Anil Shanbhag

Hi Anil,
Good day.
This problem occurs because there is no purchasing view plant specific i.e. you may be extended the purchasing view for some other plant.
1. Go to MM01.
2. Select Purchasing view.
3. Enter appropriate plant.
4. Enter relevant data & save.
If this doesn't help revert back.
Regards
Anil

Similar Messages

  • Error material not maintained by purchasing when creating info record

    Hi Expert,
    I have an issue when creating info record, error says "Material ******* not maintained by purchasing". I've checked in MM03 purchasing view, all has been maintained and at the bottom there is message says "No plant-specific data exist". Accounting view also maintained. I've also checked in MARC table for this material and plant. It existed. I cannot see anything wrong on the material master setup but not sure why am i having this error...
    Please help.
    Thanks,

    Hi,
    Error says "Material ******* not maintained by purchasing" & you checked purchasing view has been maintained.
    OK. Just cross check following optionS
    Option-1: You creating info- record for material with combination of plant & vendor....check did the material have purchasing view for same  plant-the info-record you are creating!
    Option-2: If no purchasing view for material with same plant , just extend in t.code MM50 for E     Purchasing
    Option-3: Check the material for same plant, did Procurement type F (External procurement) is there
    Option-4: Check Profit Center in Plantdata/ sto-2 view of material.
    Regards,
    Biju K

  • Error : Material  not maintained by purchasing

    Hi to all ,
    I am getting an error msg :Material  not maintained by purchasing in Pur Info record
    When I created a new matl in  MM01, in the matl type : raw matl , info record is created .
    But when I used the matl type Semifinished , finished  the above error is coming .
    Also I tried the completing the purchasing & pur text views but the same error repeats
    Kindly help !
    Prem

    Hi
    First extend the purchasing view.
    second check it in the mrp-2 view procurement type should be X or F.
    Pls check it
    Regards,
    Raman

  • Material  not maintain by purchasing

    hi guys
    when i tried to convert the planned order into purchase requesation for material type semi finished.but te system show error " material not maintained by purchasing "
    but i maintain purchasing view for the same material .
    pls lighten me
    with regards
    v.raj

    Hi Raj
      checkwith MM02 and select the purchasing view and see for any warning message if it exists then you have not created the Purchasing view properly.
    Now
    excute MM01, enter the same materal #, type and other data, select the purchasing view and (Optional enter the Purchasing value Key ) then save and now you try
    you will not get the error
    Hope this helps
    BR
    SK

  • Material not maintained by purchasing

    Hi all,
    Is there a way to check that a material number is maintained by purchasing? I know that this can be achieved by going to MM01 and then extending the view to purchasing. Is there a way to do this by checking any fields in the MM Tables?
    Regards,
    Deborah Tan

    hi,
    You can see the all details of the materials in the respective table....There is table called MARA - Material master general data....here you can look for the fields which are maintained for the material.....
    For the valuations of the materials use table MBEW....
    On the other hand you can display it from the material master itself in the MM03....
    Field for Base unit of measurement - MEINS
    Purchase value key - EKWSL
    Valid from - DATAB etc...pls check...
    Hope it helps..
    Regards
    Priyanka.P
    ASSIGN POINTS PROPERLY AND THEN CLOSE THE THREAD
    Edited by: Priyanka Paltanwale on Oct 22, 2008 9:24 AM

  • Error: Not Maintained by Purchasing

    We have just set up a new material in our system.
    When we try to enter a Purchase order for this material we get the following error message...
    "Material XXXXXX not maintained by Purchasing"
    What is causing this error and how can I correct it?

    IN MM03 transaction enter material and select views tab
    You will get many view like below.In that select Purchasing view then select org units .You can see your material maintained for your plant or not.
    Basic Data 1
    Basic Data 2
    Classification
    Sales: Sales Org. Data 1
    Sales: Sales Org. Data 2
    Sales: General/Plant Data
    Foreign Trade: Export Data
    Sales Text
    Purchasing
    Foreign Trade: Import Data
    Purchase Order Text
    MRP 1
    MRP 2
    MRP 3
    Check MARC table also for your material maintained in which plants.Transaction code Se11
    Edited by: Sridhar Jayavarapu on Dec 3, 2009 6:55 PM

  • PO not creating for the matl,giving error Material not maint for purchasing

    Hi SAP Gurus,
    When I am trying to create PO for 1 purticular material, system giving error " Material CG056A not maintained by Purchasing Message no. ME 046 " Please let me know in order to create PO successfully what are all the purchasing related information necessary to maintain for this material.
    Thanks and Regards,
    SHARAN.

    Hi
    While creating the material you have not maintained the purchasing view, hence you are getting an error.
    Maintain the purchasing view for the material in MM01, which will solve the problem.
    Rgeards
    girish

  • Material GTS-14003X not maintained by Purchasing

    1. How can i correct this error "Material GTS-14003X not maintained by Purchasing".
    2. Also during material creation(MM01), many views are there for a combination of material type and industry sector.But during creation i select few views but did not select, say Purchasing view. Now in Chage mode during MM02 if I want to have purchasing view also, then how can i do that?
    Pls help.
    Kind Regards
    Sajid.

    Dear,
    You need to slect it in MM01 so go to MM01 enter  materail GTS-14003X  then select the purchasing vie and maintain it.
    Regards,
    R.Brahmankar

  • Material PO text not copying to Purchase Requisition

    Any assistance would be gratly appreciated...
    When creating a Purchase Requisition (ME51N) text from the Material Master - Material PO Text automatically copies to the Material PO Text of the Purchase Requisition line item - as expected
    However, when a Purchase Requisition is created via MRP, the Material PO Text is not copied from the material master to the PO.
    In config, copy rule is set as follows for PRs:
    Sequence   PR Text                     Source
    01               Material PO Text       Material Master   Set to always adopt
    We have a custom program to print PR data and the material PO text is not showing up when generated by MRP - because the PR itself does not have the text.  We could change the custome code to read directly from the material maste, but would prefer a standard solution to get the text onto the PR.
    Thanks,

    this is SAP design, for performance reasons the PO text is not copied to the requisition in MRP run.
    SAP issued an OSS note about this .

  • Report for Material PO Text in purchase requisition

    Hi Team,
        In Purchase requisition user maintains specifications in Material PO Text in item details-TEXT tab.
    User wants a report which can pull this text against a PR Item No.
      Anybody knowa a way to do this
    Rajesh

    Hi,
    Kindly Take the help of an ABAPEr it is not stored directly in table we need to use a function module LEAD_TEXT.
    Regards
    Nambi

  • Doc. type/item cat.not picking from Purchase Requisition

    Hi,
    While making purchase order from link with Purchase Requisition, system provides the error message :-
         Doc. type/item cat. ZSUP/ (requisition) <-> ZSUP/ (purch. order)
         Message no. 06054
         Diagnosis
         Purchase requisitions of document_type ZSUP or item category  may not be assigned to purchase orders of document type ZSUP or item category .
         Procedure
         Check your input.
         If the problem cannot be resolved in this way, contact your system administrator.
         The latter can make the necessary settings using the Implementation Guide (IMG)
    Kindly provide your suggestion how to make PO without account assignment.
    Regards,
    Satheesh K

    Go to the path OLME-Purchase Order-Define Document Types
    Here select the document type ZSUP and press Allowed item categories
    Check here the standard item category is allowed or not. If allowed, then select the standard item category and press Link purchase requisition - document type
    Then click new entry, Select document type ZSUP and then press enter
    You will see the below screen
    Then save your entry and try again create PO.

  • Material not maintained in plant P100

    while adding material using MB1C T-Code i m getting bellow error
    Material "bicycel" not maintained in plant P100 and if i press again getting another message
    parameter for plant P100 not maintained in inventory management

    Hi
    Check whether the plant parameters have been maintained for your plant under Inventory management and Physical inventory
    If not pl maintain the same in SPRO
    Then U will not get the error
    Hope you are clear on this.
    Regards
    Vijay

  • Cost center not populated in Purchase requisition for a third party order

    Hello,
    We are currently testing the Third party order flow which includes :
    1. Creation of a sales order with item category TAS
    2. A purchasing contract is maintained for a sales order item at the schedule line level.
    (In the purchasing contract, account assignment is already maintained for each contract item, meaning a G/L Account and a cost center).
    3. Automatic creation of the Purchase requisition when the sales order is saved.
    >> The account assignment is not copied from the contract to the Purchase requisition. Do you know why and how I can do that ?
    Thanks
    Best regards
    Benjamin

    Hi Palani,
    if i am not wrong This WBS in location or additional tabs are used for settlement purpose. For PR creation by maintenance Orders can have Order number as account assignment.
    Please reply
    Thanks
    Sunil

  • Maintaining the purchase requisition field mandetory for certain PO Doc typ

    Hi,
    I have tried to maintain the purchase requistion field in PO as mandetory field for certain PO docuemnt types and for transaction code ME21N.
    I copied the standard fields setting NBF to ZBF and assigned the same to PO docuemnt types as well and in the reference data, item i mainatained purchase requisition as mandetory field . But observed that  Purchase requisition field is still not mandetory. Then  for ME21N  in the reference data, item i mainatained purchase requisition as mandetory field .
    Still it is not appear as mandetory field in po.
    Please guide how to achieve this , is any customization i am missing.
    Best Regards
    MM

    HI
    1) In transactiono OMET create Function Authorisation as Z1" there flag "Reference to Purchase Requisition".. then assign the "Z1" in txn. SU01 for parameter id EFB..and it wil make the user to create PO with reference to PO.
    2) At screen layout level :
    SPRO>MM>Purchasing>PO>Defince screen layout at screen level...
    Select ME21N details and select "Reference data Item" flag required indicator for Purchase Requsition..
    Regards,
    BK

  • MRP Vendor is not available in purchase requisition

    After running MD04 for particular material, purchase requisition is generated. But vendor is missing for that material.
    I have checked following settings:
    1. Source list
    2. Source list active for that material.
    3. Purchase info records.
    All above settings are perfect for that material.
    But still vendor is missed in purchase requisition generated in MRP.
    Please let me know where am i going wrong?

    As Ajit mentionned, the source list usage mus be set to 1.
    See note 206684
    The 'Source list usage in materials planning and control' indicator must be
    set to '1' or '2' ('2' if delivery schedules are meant to be generated).

Maybe you are looking for